PR00 should automatically display while creating sales order

Hi,
PR00 should automatically display in sales order and i have to enter price only without maintain condition record.
i dont want to enter PR00 and price.
PR00....................................1000
Defaultly that pr00 should be display in the sales condition and price filed should be blank.
so that i can enter price for that condition type PR00.
my client dont want to enter condition type every time.
Thanks in advance
by
babs

Hi,
Thanks for ur reply.
But my requirement is not that.
I am creating sales order and entered customer number, material and qty.
now system throw an error PR00 Mandatory pricing missing
In Item overview select condition tab
There u have to enter PR00 ............1000
Instead of this, PR00 should be there and price field should be blank.
now i can enter only price for PR00 condition type.
I dont want to select condition type(PR00) each and every time while entering price.
I hope now you understand my requirement.
Thx in advance
babs

Similar Messages

Automatic creation of settlement rule while creating sales order

Hi Friends,
Can any one help me how to create settlement rule automatically while creating sales order i.e saving sales order. Is there any function module or any badi which can be used.. please suggest.
thanks
bobby

Hi,
Here is the solution , First Create a sustitution by going into OPSN Transaction , only user exit say 'U902'
and write the form routine in Program named 'ZRGGBS000'
The code is below ,
*&      Form U902
   Automatic Generation of Settlement Rule For WBS and Company 4180
FORM u902.
Exit For Automatic Settlement Rule Creation for WBS Billing elements
IF sy-tcode = 'CJ20N' or sy-tcode = 'CJ01' or sy-tcode = 'CJ02'.
    DATA   lv_proj TYPE ps_pspid.
    lv_proj = proj-pspid.
    EXPORT lv_proj TO MEMORY ID 'PSPID'.
Calling YGPS_CJB1EXEC Program For Creating Settlement Rule
    SUBMIT ygps_cjb1exec AND RETURN.
ENDIF.
ENDFORM.                                                    "u902
*& Program YGPS_CJB1EXEC
PROGRAM ygps_cjb1exec.
   Automatic Generation of Settlement Rule For WBS and Company 4180
Called From Exit For Automatic Settlement Rule Creation for WBS Billing elements
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata,
      itab TYPE TABLE OF bdcmsgcoll.
DATA :lv_currm LIKE bkpf-monat,
      lv_curry LIKE bkpf-gjahr,
      lv_prevm LIKE bkpf-monat,
      lv_prevy LIKE bkpf-gjahr,
      lv_proj TYPE ps_pspid,
      lv_mode TYPE c,
      lv_time TYPE sy-uzeit.
DATA :g_datfm            LIKE usr01-datfm,
      g_dd(2)            TYPE c,                         " Day
      g_mm(2)            TYPE c,                         " Month
      g_yyyy(4)          TYPE c,                         " Year
      g_sydatum(10)      TYPE c.
IMPORT lv_proj FROM MEMORY ID 'PSPID'.
lv_mode = 'N'.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'PRZB-VARIANT'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'PRZB-VARIANT'.
bdcdata_wa-fval = 'ZGPS0001'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    bukrs = '4180'
IMPORTING
    currm = lv_currm
    curry = lv_curry
    prevm = lv_prevm
    prevy = lv_prevy.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-FROM'.
bdcdata_wa-fval = lv_currm.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-GJAHR'.
bdcdata_wa-fval = lv_curry.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VARC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'RKPSEL00'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'CN_PROJN-LOW'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PROJN-LOW'.
bdcdata_wa-fval = lv_proj.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PSPNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_NETNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_ACTVT-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_MATNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '/00'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=SAVE'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VBAC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSPO1'.
bdcdata_wa-dynpro   = '0100'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=YES'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-BATCH'.
bdcdata_wa-fval = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-TEST'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=RUN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKABA'.
bdcdata_wa-dynpro   = '0210'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-JNAME'.
bdcdata_wa-fval = 'CJB1_EXEC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_SUBSCR'.
bdcdata_wa-fval = 'SAPLKABA'.
APPEND bdcdata_wa TO bdcdata_tab.
Extract the date format from the user settings
PERFORM f_get_dateformat CHANGING g_datfm.
Changing the current date format to User Profile Date Settings
PERFORM f_format_date USING   g_datfm
                              sy-datum+4(2)
                              sy-datum+6(2)
                              sy-datum+0(4)
                     CHANGING g_sydatum.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STDAY'.
bdcdata_wa-fval = g_sydatum.
APPEND bdcdata_wa TO bdcdata_tab.
lv_time = sy-uzeit + 30.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STTME'.
bdcdata_wa-fval = lv_time.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-PRIKZ'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=TAKE'.
APPEND bdcdata_wa TO bdcdata_tab.
Calling Transaction 'CJB1' for creating settlement rule
CALL TRANSACTION 'CJB1' USING bdcdata_tab MODE lv_mode .
IF sy-subrc = 0.
ENDIF.
*&      Form F_GET_DATEFORMAT
      This subroutine returns the date format in the user setttigs
     <--P_G_DATFM Date Format
FORM f_get_dateformat CHANGING p_g_datfm.                   "#EC *
SELECT SINGLE datfm FROM usr01 INTO p_g_datfm
WHERE bname = sy-uname.
ENDFORM.                    " F_GET_DATEFORMAT
*&      Form F_FORMAT_DATE
      This subroutine returns the date as per the user settings
     -->P_G_DATFM Date Format
     -->P_G_MM Month
     -->P_G_DD Day
     -->P_G_YYYY Year
     <--P_G_DATE Date
FORM f_format_date USING    p_g_datfm
                            p_g_mm
                            p_g_dd
                            p_g_yyyy
                   CHANGING p_g_date.                       "#EC *
CONSTANTS: c_dot VALUE '.',
             c_slash VALUE '/',
             c_dash VALUE '-',
             c_1 VALUE '1',
             c_2 VALUE '2',
             c_3 VALUE '3',
             c_4 VALUE '4',
             c_5 VALUE '5',
             c_6 VALUE '6'.
DATA: l_day(2),
        l_month(2).
l_day = p_g_dd.
l_month = p_g_mm.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_month
    IMPORTING
      output = l_month.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_day
    IMPORTING
      output = l_day.
CASE p_g_datfm.
    WHEN c_1.
      CONCATENATE l_day l_month p_g_yyyy INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_2.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
       SEPARATED BY c_slash.
    WHEN c_3.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
          SEPARATED BY c_dash.
    WHEN c_4.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_5.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_slash.
    WHEN c_6.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dash.
ENDCASE.
ENDFORM.                    " F_FORMAT_DATE
thanks
bobby

While creating sales order wrt quotation customer code field is in display

Hi all,
I am facing one problem, while creating sales order with reference to quotation customer code field is in display mode.
I am not able to change the customer code. But i want to change it accordingly.
Previously it was in changeable mode only but now it is not in changeable mode.
Can anyone please tell me the solution for this issue?
Thanks in advance
Babu

hi
is that happening only when you create sales order wrt quotation,try creating normal sales order and see whether customer is in changable mode
regards
senya

While creating sales order stock should not go under reserved block,

While creating sales order stock should not go under reserved block,
What is the customization?
Please help me.

Hi,
What exactly is your requirement?
Can you be a bit more detailed?
Thanks

Condition tab in display mode while creating sales order.

Hi Guys,
When I go to create a sales order the condition tab shows all the condition types in grey, irrrespective of its being manual or mandatory. I know it has nothing to do with V/06 or standard pricing transactions. So I changes the item categry.Again used the same order type, same customer , same material and same sales area. Once I change the item category to Zxxx, Condition tab becomes changeable. So I concluded that item category is the culprit. But the question is Which part of item category is influencing it ?
Please help.
Regards,

Hi Phani,
While creating sales order (VAO1), I go to item level and click on condition tab. I see all the things in this tab grayed. Nothing is changeable. I changed the item category, while the pricing procedure was same as the old one. Condition tab became changeable. So it has something to do with item category. But what is that one thing missing in my item category which is making condition tab grayed out..?
Regards,

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

PR00 should be not editable in sales order

D/ Friends,
Weu2019re creating Sales Order w.r.t. contract. Weu2019re putting PR00 in contract. PR00 is manual, has no access sequence. Same pricing procedure has been assigned to contract and order. In that Pric Procd PR00 is manual and mandatory. In VTAA Copy Ctrl between Contract and Sales Order Pricing type is D @ Itm level.
Now the issue is that PR00 in sales order is being copied from Contract, but in Sales Order it is editable. We want that PR00 should be non-editable in Sales Order. How to achieve this?
Thanks.

Hello R S,
As you are using same Pricing Procedure in Order & Contract & PR00 is manual in Conract, you cannot make it non-editalbe in Sales Order using Standard Config.
You will have to go to Z-Development as suggested by Prasanna above.
SHD0 will also not be useful because you would like to have other Conditions in editable mode.
Hope this clarifies,
Thanks,
JIgnesh Mehta

How to block the material qty to 1 while creating sales order (VA01)?

Hi All,
Scenario : We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
Kindly guide me how to proceed.
Thanks,
Renjith

If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
Regards
Sridhar

Problem while creating sales order

Hi
   We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
Steve

Hi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
    //@@begin onActionSave(ServerEvent)
     wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
     wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
    //@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
    //@@begin executeBapi_Salesorder_Createfromdat2()
     try {
          wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
public void executeBapi_Transaction_Commit( )
     try {
          wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
¿Is something wrong? ¿Is something missing?

While creating sales order I am getting Sanctioned party list blocked but I am able to create delivery, and PGI

Dear GTS Experts,
While creating sales order I am getting Sanctioned party list blocked, but I am able to create delivery, and PGI.
Where Is the wrong ?
Thanks a lot
Venu gopal

Dear Venu
Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
Please let me know if any further inputs required.

How to restrict the order reason in Tcode Va01 while creating sales order

Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.

Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

PR00 should automatically display while creating sales order

Similar Messages

Maybe you are looking for