PR00--should not be changed after Delivery

Dear Friends,
My requirement is....
Once the Sales order is delivered partially/completely, the price condition PR00 should become GREY.....one cannot change the price in VA02.
We are using MANUAL conditioning for PR00.
Points assured
Regrads
Chaitanya

hi,
try using the user exit " Userexit_save_doucument " or  USEREXIT_SAVE_DOCUMENT_PREPARE to check if the value of PR00 is changed. Since the PR00 is not greyed out till billing is done and you have set the condition as manual, this would be one possibility.
Else you give the authorization to VA02 t.code only to those users who can change the price of the item.
regards
sadhu kishore

Similar Messages

  • Excise amounts should not be changed after IEI

    Once Incoming excise invoice is completed, one should not be allowed to change excise amounts in the A/P Invoice. This creates to a lot of problems. This posts different amounts in the cenvat clearing amount at the time of IEI and then at the time of A/P Invoice, thus creating reconciliation problems...

    done using query...

  • Change Button Not Active even after Delivery Completion Indicator is Remove

    Hi ,
    In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
    Thanks & Regards,

    Hi,
    Please check these notes.
    Note 1267916 - PO item flags do not stay checked
    Note 1174982 - Return/deletion of confirmation does not update the PO flag
    Thanks
    Zameer

  • Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

    Dear Experts,
    I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
    Requirement:
    Useful life of asset  is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
    Previously posted depreciation should be unchanged.
    Analysis:
    1.      The fiscal Year followed - October to September.
    2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
    3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
    4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
    5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
    Note:
    1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
    Kindly let me know if the requirement can be fulfilled without retiring the asset.

    Dear All,
    This requirement has been completed.
    1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
    2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
    3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
    Originally the asset had useful life of  5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
    Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
    Net Book value carried forward to 2013 = 1575.56 SAR
    Depreciation already posted till 4th period =   148.27 SAR
    Current Net book value after useful life extension           = 1427.29 SAR .
    Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
    Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
    Planned depreciation of 2014 = 225.96 SAR
    Planned depreciation of 2015 = 225.96 SAR
    Planned depreciation of 2016 = 225.96 SAR
    Planned depreciation of 2017 = 225.96 SAR
    Planned depreciation of 2018 = 225.96 SAR
    Planned depreciation of 2019 = 131.25 SAR
    Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
    The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Referncing document should not be changed

    Dear SAP Gurus,
    I have a scenario and it is for example that if sales order is created with reference to the quotation so quotation should not be changed....and the sales order should have the same material which is copied from the quotation and we should not enter other material in the sales order which is not in the quotation and same thing for the delivery.......so can anybuddy tell me that from where we can control this thing from the standard system......
    Regards,
    mohsin

    Basically i am making the sales order with reference to quotation and in the sales i can add the item which is the standard functionality but my client dont want this......my client want that sales order is created with the quotation so u cannot add item in the sales order and the quotation can not be changed...and it is for same in the delivery level also....when i am making the delivery with reference to sales order so still i can add item in the delivery order which my client dont want this....and my client also want that delivery order is created with the sales order so th sales order cannot be changed.......so if there is a user exit for this can any one tell me exact user exit......
    regards,

  • Pricing should not be changed in billing document?

    HI,
    We have given manual entry provision for pricing in Sales order level . But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. What is the configuration required to ensure that , System should not allow pricing to be changed in billing document when it is getting created.
      I have checked the forum and found no threads linked to it. Kindly help me in this regard.
    Thanks in advance
    Rgds,
    Sivarajesh. J

    Hi ,
    In SPRO -> S&D-> Billing Documents ->Maintain copying Control for Billing documents. Here select for copying control for ( based on your case) delivery type to Invoice type  (Eg: Invoice type F2: Delivery type : LF) and then go to Item and select Item Category.
    And then go to Item Category details (Eg: TAN) .  Here you find Pricing type and based on your requirement you can select. If not satisfying your need then you can modify the copying requirement.
    Thanks,
    Veerendra

  • PO- Why PO still allow to change after Delivery Completed has ticked.

    Dear All,
    I'm doing functional testing for MM, but i realised that the PO still allow to change after delivery completed has ticked.
    Can i know if there is a way to restrict any change after any good receiving or delivery completed?
    Thank you very much,
    Regards,
    Chee Wee

    Hi,
    Here we have same problem that after tick GR completed system allow to take further receipt though PO is not open.
    we communicate with SAP and there is no function available to close the po for receipt until you reduce PO qty for GRN Qty or loca / delete line item.
    We had write user exit to check tick in PO for GRN allow or not and that give error message.
    You can do same for GRN.
    Regards,
    Chetan Mistry

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

  • PO item should not be change in case of change PO if ASN has created

    Hello Experts,
    We have implemented MM-SUS. We are facing a problem, A PO consist of 2 items on different delivery date, Vendor has created a ASN For first item. Now the ASN is pending for 2nd item on require delivery date.
    In between, Purchase change the purchase order and by mistake he has changed the QTY of first item, in change order notification 1st item is also going to supplier.
    We wanted that if ASN has created for any item then even in change PO it should not go to Supplier again so that supplier can not create a ASN again.
    Please help us.
    Thanks
    Aakash.

    Hi,
    There is a field called Completion rule in Item Category.
    A: Item complete after 1st reference
    B: Item complete after full Qty referenced
    In the Item category of Quotation in your case put Completion rule as A. So whenever a Sales Order is created with reference to the Quotation, the Quotation will be complete.
    So even if some-one changes the Quotation later on, it will not be possible to create a sales order by referencing it.
    Hope this helps.

  • PR should allow to change after the PO

    Hello
    Creating the Purchase order with ref to PR, Once the PO is created with ref to PR with full qty then system should not allow to change the PR.
    How to made this?
    Regards
    sapman man

    Hi,
    My Requirement is.....PO is created with ref to PR, then that perticular PR should allow to edit in ME52N .
    it should allow only after the PO deletion, then system should allow to change that perticular PR
    How do this?
    sapman man

  • IWeb NOT showing changes after publishing

    I had 2 sites I created with iweb. I made some changes on one, but not only did it not show any changes after I published it but said there was an error. I could access the site when I entered my basic domain name, but not through iweb. I deleted BOTH sites and started from scratch. Saved my work and tried publishing at least 5 different times. It STILL shows my DELETED sites (which I can't even see on my computer because I DELETED THEM!). MobileMe account is current. Domain name current.
    Anyone else having these issues? ANy idea what to do?
    Thanks

    But did you delete your site folder from MobileMe too? It's all very well deleting your site from iWeb, but if you really want to delete it and start again, you also need to delete your site folder and index file from MobileMe. Log into MobileMe and then go to your iDisk and delete the files from there too and then re-publish from iWeb and your new pages should show.

  • PR derelease should not be allowed after  PO creation

    Dear Friends
    I have created a PR, released , then PO is created with reference to PR. After that I came back to me54n and cancel the PR release. As per our Business Practice it should not allow to cancel the PR release after PO creation.
    I have maintained message 06 076/06 400 and 06 608 as error message.
    The changeability indicator is also maintained as '1' against the release indicator'2'.
    I don't want to go for any Badi implementation or user exit. Is there any solution in standard SAP
    Thanking you
    Tapan

    Even I tried this testing but it seems like not working. I this is standard SAp behaviour. 
    Check this OSS notes 493900
    1. Question :
    Why can I modify a purchase requisition although I set the changeability of
    the release indicator to '1' ('Cannot be changed')?
    Answer :
    The purchase requisition is not modifiable via a purchasing transaction
    like ME52 or ME52N. But it is possible to change the purchase requisition
    from any other external application like sales order, planned order,
    maintenance order or network.
    The Changeability functionality only concerns the purchasing transactions.
    This is intended and a new release strategy determination takes place if
    there is a modification of the data in the external application.
    But logically why the user is cancelling the PR after PO creation? Even if they cancel the PR it doesnt impact the PO which is already created. Even if they cancel and re release the PR and try to create a new PO, system wont allow you to create new PO stating that PR is already ordered. Even though it looks strange but it doesnt harm the procurement.

  • Sale Order Status Change after delivery of materials from projects

    have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

  • PO Created by User A should not be changed by User B

    Hi Experts,
    My User has a specific requriement in Purchase Order.
    If a purchase order is created by User A, Other users like B and C who are in the same purchasing group should not be able to change the PO created by User A.
    Similarly, Others should not change PO created by USER B.
    Is there any logic to develop this type of checking.
    Regards
    Kuna.

    Hi Venkat,
    Usr A, B and C in context belongs to same purchasing group, then probably they have the similar authorizations.
    As per my understanding, you want all these user to create the Purchase Document of similiar Type but do not want them to change the PO Created by others.
    You can have this control by user exit 'EXIT_SAPMM06E_013'.
    In this you just have to write your logic to restrict the user as shown below.
    IF SY-TCODE EQ 'ME22N'. 
    IF I_EKKO-ERNAM NE SY-UNAME.
       MESSAGE 'YOU ARE NOT AUTHORIZED TO MAKE CHANEGS' TYPE 'E'.
    ENDIF.
    ENDIF.

Maybe you are looking for