PR05 shows data for anyone in org.

We are upgrading from 4.5b to ECC 6.0 and if I or anyone else goes into PR05 and enters a personal number for someone higher up in the orginazation you can see all of their trips. I have checked table T77S0 against our 4.5B box and all the settings appear to be equal (ecc6.0 has more settings avail.) Our 6.0 box is an upgrade of 4.5 so i'm under the impression that all tables should have retained the same switch settings...please help! Thanks in advance!

In OOAC the setting ORGIN is set to 1 and ORGPD is set to 1. In OOPS settings are: EVCCC=2; EVCRE=X; EVEGC=2; EVPAC=2; ORGA=X; PRELI=99999999; PPABT=0; all other settings are empty.(those settings were set in 4.5b and retained their values during the upgrade) FYI - I have gone into PA20 to verify infotype 105 subtyp 0001 and everything appears to be setup correctly. Is there some switch or something else I need to do to "activate" structurals since we upgraded our system, something new in ECC6.0 that was not in 4.5B. The 6.0 system acts like its taking the org. structure into effect but not the PD profiles (which are setup and tied to people). Thanks again!

Similar Messages

EXCEL GRAPHS SHOWING DATA FOR SAP

ANYBODY KNOW ANY FUNCTION CALL TO EXCEL GRAPHS SHOWING DATA FOR SAP

Hi,
Please don't use all Caps in Subject and Body Text too
Please have a look at [Forum Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Best Regards,
Faisal

Report to show data for specific MD

Hello,
I am racking my brain thinking of a way to do this...
I have some specific masterdata for example Product 1,2,3...10 and i also have a cube where any Actual & target sales are recorded
I need a way of producing a report whereby the report shows ALL products and any data relevant from the cube...
ie if there is a product where there is no data for actuals or targets then the report will still show a line but with blanks in the KF.
(right now, if there are no actuals or targets, that product is ommited from the report, I need to be able to see that product and the fact that there is no data for it in the cube)
any ideas?
thanks
BW_ER

Hi,
There are multiple ways of achieving what you want.
1) You can do as proposed and create an infoset and then you can use and outer join on the master data. This way all master data records are displayed independently of whether they have any transactions in the infocube when you create a query
2) You can create a multiprovider on your master data and your infocube and then in the mapping of the fields, specify that you want the e.g. 0MATERIAL to come from your master data
Hth,
Jacob

How to only show data for a certain period of time for cumulative data?

I need to show cumulative data for the past 12 months on a chart (e.g. # of accounts). But in order to get the cumulative data for Month 1, I need to cum the data starting from the very first month when we started to add new account which can be Jan 2006. If I put a filter to limit the data to only last 12 months, then my Month 1's cum data will not include any account prior to Month 1. So how do I do this?
Edited by: user637947 on Feb 5, 2009 2:02 PM

Hi,
Try this Filter....
Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, -11, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) - 1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) + 0), CURRENT_DATE))
Thanks and Regards,
Amit Koul

Is Acrobat Reader 9.3.1 showing up for anyone yet

I am not seeing the 9.3.1 Acrobat Reader patch yet in my patch list. I am
guessing it should be in the list by now. Anyone have it show up? If so I
will need to dig around and see why I don't have it yet.
Best Regards,
Jim Koerner

Mine showed up late yesterday.
Jim
"Shaun Pond" <[email protected]> wrote in message
news:[email protected]..
> Jim,
>
> "Adobe APSB10-07 Reader 9.3.1 for Windows (Update) (All Languages) (See
> Note)" I see that
>
> --
>
> Shaun Pond
>
>

How do I get Thunderbird to show Date for email intead of just Time?

New Mail only shows Time. Seems to have started with change to 2015

By default Thunderbird only shows the time for today's messages. It takes for granted that you know what day it is. The date is appended at midnight.
Is this what you are seeing?

SSIS 2012: Integration Services Catalog not showing data for most recent executions

Techies--
Under a previous deployment of an SSIS package, I was able to go to the Integration Services Catalog, look under the folder-->project--> package then right click and request a standard report for all executions. The report would display
the execution details.
Today a colleague recently deployed a newer version of the same package to a test server... which is failing from a job set up via sql agent. I went to look at the root cause by going to the Integration Services Catalog to review the report. No execution
data appears. I looked at the filter--compared it to the filter I have set on the production copy of the stable version. The folder name, package name and project name match. Both have a status of 'All'. The date range is the same (2/19 - 2/25).
In fact, I went back to the test deployment and changed the date range to the date of the last failure (1/30). Now I see data only from 1/30 but none for today's execution.
Something must have happened in the deployment process--but what? How do I debug this issue with the reports--but even more importantly, how do I get to the raw execution data to see what the story is on the failed execution itself?

@Arthur, thanks for responding. In a nutshell, I searched through the ssisdb.catalog.event_messages table to determine roughly the same thing you determined--an execution for that package (or for that matter, any misnamed package) with today's timestamp
simply never occurred--even though the job agent log appeared to indicate it had.
I re-deployed the package ... forced an execution with an interactive run from the catalog... and viola! The execution info appeared through the standard reports as expected.
Any idea where I could/should look for a wayward deployment? (BTW, the report for validations showed no data either on that first deployment).

MB51 showing data for just one Posting date

Hi All,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
Please tell what should i do ASAP.
Thanks
Madhur

HI,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
year from 01/01/2008 to 12/01/2008 i Think this is MM.DD.YYYY format,
Ok can you clear your MIGO posting date fromat i.e MM.DD.YYYY or DD.MM.YYYY,check it at your end
or try this give only plant and movement type 101 and execute report
Regards
Kailas Ugale

Showing data for the first row only

Oracle Experts ,
Below is my table in oracle.I wnat show Company ID only for the first row of each company. Table 2 is my output .
Company Country Company ID
BARCALAYS UK 1
BARCALAYS USA 1
BARCALAYS Australia 1
Kingfisher UK 2
Kingfisher INDIA 2
Kingfisher INDIA 2
Output Table 2 :
Company Country Company ID
BARCALAYS UK 1
BARCALAYS USA Null
BARCALAYS Australia Null
Kingfisher UK 2
Kingfisher INDIA Null
Kingfisher INDIA Null
Please give me a sql query.
Many thanks in advance .
Regards,
Dirasa

based on if a particular country is appearing twice for the same company and company_id wether to show the company_id for that country or not you may use any of the below queries :)
/* Will show compan_ID twice if the country is repeated */
with x as (
      select 'Foo' company_name, 'UK' country, 1 company_id from dual
      union all
      select 'Foo', 'USA', 1 from dual
      union ALL
       select 'Foo', 'USA', 1 from dual
       UNION ALL
      select 'Foo', 'AUS', 1 from dual
      union ALL
    select 'Foo', 'AUS', 1 from dual
      union all
      select 'Bar', 'UK', 2 from dual
      union all
     select 'Bar', 'USA', 2 from dual
     union all
     select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
   FROM (SELECT
   company_name,company_id,country,rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
    FROM x)
/* Will NOT show compan_ID twice even if the country is repeated */
with x as (
      select 'Foo' company_name, 'UK' country, 1 company_id from dual
      union all
      select 'Foo', 'USA', 1 from dual
      union all
      select 'Foo', 'AUS', 1 from dual
      union ALL
    select 'Foo', 'AUS', 1 from dual
      union all
             select 'Foo', 'USA', 1 from dual
       UNION ALL
      select 'Bar', 'UK', 2 from dual
      union all
     select 'Bar', 'USA', 2 from dual
     union all
     select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
   FROM (SELECT
   company_name,company_id,country,row_number()over(PARTITION BY company_name,company_id ORDER BY country) rn
    FROM x)
/* Will show compan_ID twice if the country is repeated */
with x as (
      select 'Foo' company_name, 'UK' country, 1 company_id from dual
      union all
      select 'Foo', 'USA', 1 from dual
      union ALL
       select 'Foo', 'USA', 1 from dual
       UNION ALL
      select 'Foo', 'AUS', 1 from dual
      union ALL
    select 'Foo', 'AUS', 1 from dual
      union all
      select 'Bar', 'UK', 2 from dual
      union all
     select 'Bar', 'USA', 2 from dual
     union all
     select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
   FROM (SELECT
   company_name,company_id,country,dense_rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
    FROM x)
                Cheers!!!
Bhushan

How to show data for navigational attribute in a report ?

Hello all,
I have a hierarchy info object A which has a navigational attribute(hierarchy) B. I need to filter on B for a particular node.
I have added A in the filter column and selected B as the attribute. How can i restrict B for a particular hierarchy node ?
Any help will be appreciated.
Thanks in advance
S N

Hi,
Have you defined 'B' as Navigational attribute at InfoProvider Level?
You can Restrict B for a Particular Value once it is defined as Navigational attribute at InfoProvder level.
Go to InfoProvider maintaince>click 'nav attributes'>enable it (check the box).activate the InfoProvider.
Then you can see it under same dimension where 'A' is assigned and its name would be A_B.
Drag and drop in to rows and restrict(include/exclude) with required value.
thanks
Message was edited by:
Murali

MB5B showing diff data for diff users

Dear All,
At my client side in standard report MB5B for one user data for particular material is coming while for another user
it is showing no data.
I have checked authorization object in SU53 but it is having no problem.
Roles,parameters and profiles are correct in both.
Also i have checked all materials in MB5B for both users and found the materials which are having nil stock in current
date are not showing data for that user while for other user it is showing data.
What could be the reason and what changes are required in user profiles??
Thanks,
Naren

Thanks Ajit....in category it was not tick..
Naren

Query not showing data

Hi,
I have an infoset which is on top of two ODSs.
Data for a particular cost center is present in both the ODSs.
There is no data prsent in RSISET for that CC.
Also the query is not showing any data for that CC but data is showing data
for other CC for the same date.
Please help.
*points assured*

Dear Sourav,
You can Check if there is some other primary Key differences in the Infosets .Have you declared only Costcenter as the Key for both the ODS Objects ?? Check the other links that you have maintained as a part of key in Infoset.
Hope it helps..
Thanks,
Krish

Query doesnot show data

Hi experts
we have one data validation query where I am trying to see data according to Request numbers...For every year we have two requests...one Base data request and other Restated data request...
Like that for 2009..its showing data for Base data request but not Restated data request
ITS same problem with 2010 data requests...
Do you know how to fix this problem?
Thanks in advance.
S Hayward.

Couple of things:
1. Are both the request kept in same cube?
   If yes, browse the cube data and see if you are able to see the request ID there.
   If no, then check the filter in the query and make sure that result is not filtered by infoprovider.
2. Is your query running on cube directly or running on multiprovider?
   If not, check the multiprovider definition. You can try browing the data from multiprovider and see if you are getting desired result.
- Danny

Tree node retrieving data for the 1st node only for 3 data blocks ?!

Hello alllll
i have 3 DATA BLOCKS MAster-Detail-Detail ; GL_TYPES -< GL_ACCOUNTS -< GL_COMPANIES
The Rel between 1 & 2 is
GL_ACCOUNTS.TYPE_ID = GL_TYPES.TYPE_IDThe Rel between 2 & 3 is
GL_COMPANIES.ACCOUNT_ID = GL_ACCOUNTS.ACCOUNT_IDi also have a Treewhich is retrieving data in the opposite data blocks the following code used in WHEN-TREE-NODE-SELECTED Trigger and it works fine but not for every node ;
the node selected shows data for the first node only; Say Assets but if i selected any other node it doesn't return any data ?
could any boady pls explain to me why is that happening ?
The following code is:
DECLARE
        htree ITEM;
        NODE_VALUE VARCHAR2(100);
BEGIN
IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN
-- Find the tree itself.
htree := FIND_ITEM ('BL_TREE.IT_TREE');
NODE_VALUE := FTREE.GET_TREE_NODE_PROPERTY( htree, :SYSTEM.TRIGGER_NODE , Ftree.NODE_VALUE );
GO_BLOCK ('GL_ACCOUNTS');
   set_block_property('GL_ACCOUNTS', DEFAULT_WHERE, 'GL_ACCOUNTS.ACCOUNT_ID = ' ||
   ftree.get_tree_node_property('BL_TREE.IT_TREE', :SYSTEM.TRIGGER_NODE, FTREE.NODE_VALUE));
EXECUTE_QUERY;
END IF;
END;
Regards,
Abdetu...

Hello Ammad Ahmed
Thanks really for reply ,i appreciate... :)
Can you explain little more what is the meaning of this?a tree block on canvas beside 3 data blockS out of 2 tables as follows
SQL> desc GL_ACCOUNTS
Name                                      Null?    Type
ACCOUNT_ID                                NOT NULL NUMBER(10)
TYPE_ID                                   NOT NULL NUMBER(1)
ACCOUNT_NAME                              NOT NULL VARCHAR2(100)
IS_CLOSED                                 NOT NULL NUMBER(1)
ACCOUNT_ID_PARENT                                  NUMBER(10)
SQL> desc GL_COMPANY_COA
Name                                      Null?    Type
ACCOUNT_ID                                NOT NULL NUMBER(10)
COMPANY_ID                                NOT NULL NUMBER(2)only table GL_ACCOUNTS has a self rel so on data blocks on forms i have out of these 2 tables 3 data blocks in the following order
GL_ACCOUNTS_PARENT on GL_ACCOUNTS has a where clause on it's property;
account_id in ( select distinct account_id_parent from gl_accounts ) on GL_ACCOUNTS_PARENT block i am displaying on 1 row:
1. the account_id ,
2. the account
3. name and account_type_name in a LOV
on the second block GL_ACCOUNTS depending on the GL_ACCOUNTS table also am displaying muti rows :
1. the account_id ,
2. the account
and a relation on form
GL_ACCOUNTS.TYPE_ID = GL_ACCOUNTS_PARENT.TYPE_ID AND
GL_ACCOUNTS.ACCOUNT_ID_PARENT = GL_ACCOUNTS_PARENT.ACCOUNT_IDon the third block GL_COMPANY_COA depending on the table GL_COMPANY_COA
am displaying the company_id & company_name in multi_rows
GL_COMPANY_COA.ACCOUNT_ID = GL_ACCOUNTS.ACCOUNT_ID
how the data will be looking in data blocksam using the following link -> Large trees - using partial tree population
http://andreas.weiden.orcl.over-blog.de/article-29307730.html
PROCEDURE PR_FILL_TREE IS
    CURSOR crTop IS
      SELECT ACCOUNT_ID VALUE,
             ACCOUNT_NAME LABEL
        FROM GL_ACCOUNTS
       WHERE ACCOUNT_ID_PARENT IS NULL
       ORDER BY type_id, ACCOUNT_id;
    nd FTree.NODE;
BEGIN
      Ftree.DELETE_TREE_NODE(itTree, FTree.ROOT_NODE);
      FOR rec IN crTop LOOP
          nd:=FK_ADD_NODE(Ftree.ROOT_NODE, rec.VALUE , rec.LABEL);
          PR_QUERY_DETAILS(nd, rec.VALUE);
      END LOOP;
END;
if any unclear... pls notify me...!
Regards,
Abdetu...

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

PR05 shows data for anyone in org.

Similar Messages

Maybe you are looking for