PR05 status not correct with FI

Hello all!
We have the following issue:
the user inserted the expense in PR05 and then he try to posted trough PRRW the expense to FI.
However the system gave an error message regarding the blocked CO periods. we´ve opened the CO periods but the user deleted the run in PRRW. Going to PR05 the status is "Transferred to FI".
We´ve went to the vendor but nothing is posted.
How can I change the status from "Transferred to FI" to another status so the expense could be posted to FI?
Regards,
Ana

Hi Ana
Probably report RPRTRVSW is your only option now if you cannot reject the posting run (was the posting run partially posed - ? What was the status of it in table PEVSH?), usually if the posting run is rejected, it should run this report anyway in the background and reset the trip status but it really depends on the status for the posting run in PEVSH anyway.
What EHP and SP version do you have for EA_HR, there are several notes that optimize the posting run administration so let me know on these points and I can suggest the notes.
Thanks
Sally

Similar Messages

  • Check Deposit List - cannot post Processing status not correct

    Hi Expert,
    I was trying the edit a check deposit list and I encountered error message during save.
    "Cannot post. processing status not correct."
    Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
    How to go to statement/list processing to change to status to 3?
    thank you

    Hi,
    Use T Code FF67,
    Select the Check deposit list and click enter. Now go to Settings > Specifications
    Here you will find the "Processing Status" for you to continue.
    Regards
    AKV

  • Compliance on content status not correctly updated on CAS

    We have a new SCCM 2012 R2 CU1 environment with a CAS and multiple primary sites.
    We noticed that the compliance percentage
    for some applications are not correctly (50%) updated on the CAS for a site with a primary site server with a DP role and a site system with a DP role. It is shown correctly (100%) on the primary site server.
    On the CAS you can see the message "detail will be available when server finishes processing the messages" on the content status asset details for some applications.
    We have verified that these applications are distributed. The compliance percentage is corrected if we go to an application on the CAS and redistribute it. It only takes a second to finish. So it looks like a bug on the CAS. 
    Since we are doing our proactive checks on the CAS, it is important for us that the information is shown correctly. We have rebooted the CAS with no result. Also we have all updates installed. We have not found a solution for this yet.
    Is there anyone else with this issue? What can we do to troubleshoot or fix this issue?

    Hi  ,
    As it is related to System Center 2012 Configuration Manager, you can create a new post on the configuration manager forum to ask for more information:
    http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
    More experts will assist you, then you will get more information relation to your issue.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Letter of credit check status not correct in VL01N

    Hi, Gurus,
    I activate both credit management and documentary payment. When I try to create delivery-VL01N with reference to a sales order, i assign an financial document with 100% depreciation. Suppse deliver amount exceeds this financial document, system should issue message and block this delivery. However, there were no such message and credit status is "A" when saving delivery.
    In Vl02N, not changing any data, system issue the message showing that
    the financial document value is exceeded, and delivery is blocked when I save the delivery.
    I checked my configuration, and cannot think of anything related to this.
    After debug, I found out that the reason is that SAP get delivery value from table S131, field  OLIKW and compare it with financial document open value. However, S131-LOIKW is 0 when I create the delivery. After delivery is created, S131-OLIKW value is corect. Therefore, when i change delivery and try to save before exit, system will issue the message.
    Does anyone know anything might be related to this weird issue?
    Thanks,
    Cicely

    Hi Gopala,
    The accounting document has already been released &accounting doc has been created. But the value of Financial Doc i.e Letter of Credit remains same.
    Regards,
    Mahendra

  • Totals for Hierarchys not correct with condition

    Dear All
    I have a Bex query with two hierarchys, one in rows and the other in column. query is working perfectly fine without condition in query. when there is a condition added in the query for the total amount more than or equal to * the totals are not displaying correctly.
    Totals are displayed for the amount which are less than the amount *.

    Try to change in the KF properties, defining the totals as summation, instead of "nothing defined".

  • Read/Unread, Replied, & Forwarded status not syncing with Exchange 2003 SP2

    Is there a solution to the email status syncing issue for Microsoft Exchange 2003? It had never work since the day we setup the exchange account on the iphone. Any suggestion is appreciated.
    I posted the above question in May 2009. iOS is now at 4.2.1, I guess Apple has no plan on addressing these. Would it work with the latest Microsoft Exchange?

    Read/Unread worked for me when we were on Exchange 2003, and it continues to work now that we are on 2007. So it's probably an issue in your Exchange server.

  • Safari webinterface Not correct with iPad 3

    I trief to connect my iPad 3 via Safari to the webinterface of my Vu+ Duo. The Interface starts, but with no contents, only saying 'loading...'. When I use my iPhone 4 with Safari it works corectly. All settings are the same, what is the difference and how can i fix it?

    Hi vasiliOs,
    Yes I restored as new, and tested Safari at that stage, and it worked. I then resynced from a backup...
    ..and it didn't work anymore!
    I'll have to do t again and add the apps one by one I think as you suggest, I was just hoping for an easier way to do it!
    Thanks
    Dillon

  • Spau Adjustment with Note Corrections

    Hi All,
    I am working with SPAU for the forst time, I ran SPAU and under the Note Corrections I found one note with a status of "Yellow color traingle ". When I clicked on this it asked me if I want to change the user on this note and I clicked it yes.... and after that it implemented the note and it went away from the note corrections list under SPAU. So my concern is if this is the right way of doing it or do I need to do something else.
    Also I looked for all the notes in SPAU with Yellow lightes and then I looked out for these in SNOTE and found that few of them have the status "can be implemented", some have "incompletely implemented". So i am just wondering what do I need to do in such case.
    Thanks,
    Raj
    Edited by: rajatg on Aug 28, 2009 5:51 PM

    @rajatg
    Yellow status means "SAP says the note is applicable for your system, but I cannot apply everything automatically. There are something you need to apply manually"
    SAP Help says
    "The system might display note corrections with a yellow traffic light symbol during modification adjustment (transaction SPAU). The correction implemented previously based on a note was overwritten by a Support Package that does not contain these corrections. Note implementation is restarted if you click the yellow traffic light. "
    So basically yellow means the note is okay for your system but something is wrong with corrections/modifications. I recommend you look the note in OSS and corrections and compare each correction object after applying the note in SPAU. So you might find somethings should be done manually.
    Eventhough yellow notes can be applicable, you can look the note in OSS, then decide not to apply it based on SAP version, support package. So you can choose "Reset to Original" option from toolbar or right click.
    One more thing is important to remember when the notes are applied in SPAU, you have a SAP Net (OSS) connections from your system, so SPAU can check the latest version of the note.

  • The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

    We are getting the below error when we see in Crawl logs
    "The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
    This is happening in FAST search.
    Here I can see soke of the logs related to this search crawl.
    Could anyone please help on this?
    web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
    ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
    07/30/2014 01:30:46.65  OWSTIMER.EXE (0x28DC)                    0x1BC0 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
    Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
    executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.31  mssearch.exe (0x0588)                    0x1DE4 SharePoint Server Search       Propagation Manager          
     e3o3 Verbose  executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.68  mssdmn.exe (0x15CC)                      0x1060 SharePoint Server Search       HTTP Protocol
    Handler          du4i                     0x29E4 SharePoint Server Search       HTTP
    Protocol Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x29E4 SharePoint Server Search       HTTP Protocol
    Handler          du54 High     CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0.  [httpacchelper.cxx:703] 
    d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x130C SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address http://nvcp'/sites/quipme cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details: 
    The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du54 High  
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x2948 SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address
    http://nvcp'/sites/MDPPubng cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details:  The crawler could not communicate with the server. Check that the server is
    available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
     CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200  [stscommon.cxx:490]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvg0 High     STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200  [sts3util.cxx:1332]  d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     en0e High     CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214]  d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dv3p High     CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3acc.cxx:185] 
    d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb1 High     CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3handler.cxx:312] 
    d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du2z Verbose  CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'.  [stscommon.cxx:476]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb2 High     CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330]  d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'.  [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
    Anil Loka

    Hi,
    According to your post, my understanding is that you got error when communicating to the server.
    This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
    You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
              Ping <servername>
          2.  You should be able to connect to the server using telnet command
    Telnet< servername> <port number>
    More information:
    Troubleshooting of FAST Search Configuration
    If the issue still exists, you can delete the old search application and recreate from the beginning.
    You can also reset the index and do a full crawl after.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Status bar missing in Firefox 6.0, also Real player does not function with updated version, had to switch back to 3.6

    I've installed Firefox 6.0 about 3 times and each time I noticed that the status bar at the bottom of the page was missing. I relied upon the Norton Security "lock icon" which in version 3.6 would appear in the lower right hand corner of the status bar before signing in to websites or making transactions and found it very helpful. It was present in version 3.6 but not in 6.0. When I went back to 3.6 I suddenly had problems with the page freezing up so returned to 6.0 which corrected the problem but was not comfortable without the icon. I contacted Norton and via remote access the tech determined that the problem exists with Firefox's 6.0 version so he reinstalled 3.6 for me. Also I have a paid subscription to Real player Plus and it does not function with 6.0. I'm concerned because it seems you will soon phase out 3.6 and I will be without these functions which are important to me.

    I have a solution! Follow this link and download the older version. When I installed it, everything came back as it was before! Yay! Good luck to you all. And bad move, Mozilla, in not making it clearer what the system requirements were for the update!!!!
    http://www.macupdate.com/app/mac/10700/firefox

  • Customer Standard Order was delivered with credit status not approved and blocked.

    The Customer Standard Order was delivered with the credit status not approved and blocked.
    3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%,
    We have checked the settings in OVAK and the assignment is correctly set as D and 01. This is an issue with a high risk customer with static check in OVA8 transaction.
    Please advice.
    BR
    Anuja

    The Customer Standard Order was delivered with the credit status not approved and blocked.
    If the sales order is blocked system can not allow you to create delivery with out approving it.
    3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%
    There could be reason that in FD32 for the payer customer the risk category might not have been assigned during those 3 sales orders creation. Also one more reason in OVA8 against the Static credit check if open order field is not ticked.
    Please let me understand what is your exact issue currently?
    thanks,
    Srinu.

  • Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

    Hi ,
    I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username  was not correct. Verify that it was entered correctly and try again".
    I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
    What should i do ??
    Thanks in advance.
    Regards, Anurag

    HI,
    right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
    http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
    let us know your result
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Message log not correctly associated with contact

    I'm having an issue where I cannot text message a particular contact or phone number. A series of steps I took seems to have exposed a glitch where the message log will not corrrectly associate itself to a newly created contact.  So now when I push the SMS button on the new contact, nothing happens. Also when I manually start a new text message and add the contact to the text message and press send, the message clears from the text box and nothing else happens.
    Here is how you reproduce the error:
    1. I called a number and quickly hung up, just as you would do to log a number for saving later.
    2. From the call log, I clicked on the SMS button to send a text message.
    3. I sent a text message.
    4. From the text message log, I clicked on the number at the top to save it to contacts.
    5. I saved a new contact with the number.
    6. If you go back to the message log, you should notice that the message log header does not update with the new contact's name. Instead it will still show the number.
    7. Finally, I went to the test contact and pressed the SMS button and nothing happens.
    After you add the contact like I did, it seems that the contact does not correct connect itself with the message log.
    After step 5, go to the message log and click on the message log header which should still be the number. When you do this, you would think it would open up the new test contact info card, but instead it opens up a new contact card, as if the number is not saved to a contact yet. It gives me the option to Add To Contacts at the bottom.

    I have the same issue.  I started not being able to text only one person.  I go to the contact and click on the "SMS" button and it doesn nothing.  If I try to send the message directly to the number it just doesn't do anything, the message leaves the text box, but doens't show up in the conversation window.  I'm not exactly sure what I did to do this, but I think it's because I added the same contact twice.  Once from my incoming calls, and once from my outgoing texts.  I've tried deleting all references to this number (ie the contact info, incoming/outoing calls and texts) but nothing has worked.  It must be the corrupt contact thing as well.

  • Cintiq tablet will not work correctly with windows

    I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity. any suggestions to correct this?

    Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

  • I am being repetedly asked to verify certificates and also cannot use xmarks as it does not appear to work correctly with my current version of firefox (8.0) and my mac 10.6.8. I tried removing and reinstalling but unsuccesfully.

    whenever i start firefox i receive a message saying that the certificate is not recognised - it is a certificate relating to xmarks.
    in fact upon installation i received another message stating that it wouldnt work correctly with my version of firefox. now i have updated firefox but receive the same message.
    thinking that it was an issue relating to certificates i went into "preferences" and removed all the certificates in the "authorities" section also given that i didnt recongnise any of them (e.g. turktrust!!).

    Hi,
    /Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
    Move the Safari app from the Desktop to the Applications folder.
    Restart your Mac.
    That's why you see this:
    When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
    After your restart your Mac, click the Apple  menu (top left in your screen) then click:  Software Update ...
    Carolyn  

Maybe you are looking for