PR1.3 Update Problem: lost feed

After the update to PR1.3, I lost the feed on the home sceen.
Accuweather is still there, but the rest of the screen is completely black
I check the setting under Notifications > Feed on Home Screen and Twitter is still enabled - as before the udpate.
The twitter app works fine, but the Feed on Home screen is dead
any help would be appriciated
Solved!
Go to Solution.

Hi Ebalaf, can't help you I'm afraid but to say there seems to be a few inconsistoncies with this latest release of 1.3. Maybe people have been installing dodgy software? N9 should be clean of all **bleep**. It's a clever os and would not suffer fools gladly! I am in the UK and have yet to get the fabled 1.3 update. However, what is it anyway? As long as we have the basic ingredients, who cares? Flash it or re install.
Regards,
Gray
gray

Similar Messages

I just ran an Apple software update and lost video in my Final Cut 7 running on OS 10.6.8. It is indicating a codec problem. Any ideas on how to fix this?

I just ran a software update and lost video in my FCP 7 timeline (OS 10.6.8). I get an error message that there is a codec problem and get either a green or black screen. Anybody have idea how to fix this?

what happens if you create a new apple prores 422 sequence and drop bars and tone into it.
Does it display correctly? If so, I'd assume the the prores codecs are ok.
Not sure I"ve worked with hdv2 material. You may need to reinstall your os and fcp and not do the latest software update. People have definitely reported problems with hdv material after the update. Maybe someone will speak up with an alternative solution.

Demonstrating lost update problem

Hi
I would like to know if it's possible to demonstrate the 'lost update' problem in oracle without using simulation. If so how would I go about doing this? I assume I will need to establish multiple sessions within a single transaction in order to have independent transactions to demonstrate this properly.
Thanks.

The type of behaviour that leads to a lost update can be demonstrated with something like this.
In session 1 run a pl/sql block like:
BEGIN
   FOR r IN (SELECT * FROM t ) LOOP
      IF r.id = 5 THEN
         DBMS_OUTPUT.Put_Line ('ID is '||r.id||' and descr is '||r.descr);
         DBMS_LOCK.Sleep(30);
         UPDATE t SET descr = 'SLEEPY' WHERE id = r.id;
      END IF;
   END LOOP;
   COMMIT;
END;The Sleep simulates user thinking time, or perhaps some delay in the proce for complex calculations and lookups.
While session 1 is busy, in session 2 do
SQL2> UPDATE t SET descr = 'AWAKE' WHERE id = 5;
1 row updated.
SQL2> COMMIT;
Commit complete.
SQL2> SELECT * FROM t WHERE id = 5;
        ID DESCR
         5 AWAKEThen, when the block in session 1 is finished, you will see:
ID is 5 and descr is ALL_CATALOG
PL/SQL procedure successfully completed.
Then do
SQL1> SELECT * FROM t WHERE id = 5;
        ID DESCR
         5 SLEEPYThe update by session2 was lost.
There are two ways to handle the situation. First, define the cursor as FOR UPDATE. In this case, session 2 would receive an error. The other way, optimistic locking, is to use something like the following as an update statement in the pl/sql block:
UPDATE t SET descr = 'SLEEPY'
WHERE id = r.id and
      descr = r.descr;Then check for the success of the update.
TTFN
John

App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next download the app on the computer and try to sync.
- Last, restore from backup.

"Enter your name and password to update the RSS feed"

I keep getting a pop-up from Safari (even when it's in the background) that says:
+*Enter your name and password to update the RSS feed*+
How on earth do I disable this? It is asking for a username and password for Twitter so I must have clicked an RSS feed link there, but after searching like mad, I can't figure out where Safari looks for RSS at on my system.

Same here,
It says:
<<Enter your name and password to update the RSS feed.
To update teh RSS feed "Gmail - Inbox for [email protected]", you need to log in to the area "New mail feed" on mail.google.com. Your password will be sent in clear text.
Name: (blank field)
Password: (blank field)
O Remember this password in my keychain. >>
This started occurring immediately after updating to safari 4.
I tried disabling the automatic RSS updates in safari preferences, set it to "never" as suggested, but the annoying window keeps on popping up.
So the original question is still not answered for me.
It seems to me that all people reporting this problem are OSX Tiger (10.4.11) users

New episodes update problem

Hi forum from Italy,
i have created an application (Coldfusion Server Based) that publishes the audio podcast named "Punto Nave" (Point Ship of Italian Coast Guard Radio) on various platforms including iTunes: http://itunes.apple.com/podcast/punto-nave-rtl-102-5 -radio/id403498055.
The application have a CMS Back End Area and after audio file upload and tag inserted, automatically:
- store the contents on MySql DB;
- publish it on the web http://guardiacostiera.it/puntonave;
- generates a RSS 2.0 and ATOM 1.0 Valid Feed http://guardiacostiera.it/rss/puntonave.xml;
- and after adding a new episode, update the feed with the ping service calling this URL: https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=403498055
The application run correctly till episode 60.
After (now we have charged 63 episodes) on iTunes Podcast Store (Web and iTunes views) show only 60 episodes.
Can you help me?
Best Regars
Giacomo

I'm afraid I can't bring you any joy. It usually takes a few days for new episodes to appear in the Store (they appear immediately for subscribers as the iTunes application reads the feed directly) but since December 11th is an unusually long delay. Others have complained about failure to update - it's been speculated this may be related to the holiday period, but there's no evidence either way for that.
Similarly the image hasn't updated as the feed hasn't been read. Your feed references the podcast image correctly. Quite apart from the delay in even reading the feed it's become apparent from the number of similar posts that there is an ongoing problem with the Podcast Images. They were always slow to appear, but in some cases it's been weeks with no results.
There isn't really anything you can do yourself - your feed is fine. You could try iTunes Support, but you will very likely simply get form answers telling you how to do things you've already done perfectly well. If you want to try them anyway, go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to 'Express Lane', which will guide you eventually to some contact options.

N9 PR1.1 Update released

Hi all,
just to inform you that we have now started to publish PR1.1 update for N9 (software update version number 20.2011.40-4). The updates are published in waves and your phone will display a notification once it's available for you.
Some of the new features include:
NFC tag reading to instantly interact with NFC tags
Music controls on lock screen
Photo and video shooting with color filters: black & white, sepia, vivid, negative, solarize
More powerful multitasking with improved memory handling
Swype for fast typing
Faster MfE synch, synchronizing only active folders
Noice cancellation reduces background noise so that your friends hear you better
Close apps easily with swiping down, this now on by default
New indicators for standby screen like charging and calendar
etc.
Enjoy!
BR,
yvonne

This is brilliant news!! I know Nokia are often quite secretive regarding changes and bug fixes in firmware, but there appears to be a serious issue with a number of 64GB devices (particularly Austrian black 64GB handsets). Serious stability issues, random reboots and app crashes plaguing a number of these devices
Do you know if there might be a fix to address this particular problem?
The N900 suffered a similar random reboot issue just after launch that was completely fixed in the first firmware release (start of 2010). The key thing here is many users are waiting to send back their phones if they are genuinely faulty but at the same time, many will wait to try PR1.1 if it addresses this problem.
Do we know if there have been any stability improvements, particularly targetting Finnish made 64GB models?
I have mine boxed to be sent back to the supplier today (to order again at a later date), if PR1.1 solves the problems I'll definitely hold off and I'm sure a number of other users will too.

When Firefox updated, I lost all my BOOKMARKS besides my toolbar. Can't express how unhappy bar

When Firefox updated, I lost the toolbar including the link for bookmarks. When I "searched" for Bookmarks it said I had none.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

HELP...After PR1.2 update the KEYBOARDS are comple...

Hey kids,
after PR1.2 update earlier today (central EU N9) my keyboards are LOST...
no Swype, no basic keyboard...in Settings: no keyboards installed, no active text input, nothing to choose from...
I tried to re-install immediately, no PR1.2 on NSU or yet...
I can`t write any message, set any password....
damn it
Moderators notes: Mentioning unauthorised methods of flashing not allowed on the fourms.
Solved!
Go to Solution.

Hi,
can you please provide more info about your configuration? It would be useful to have quick voice input keyboard version, harmattan version (pr.10, pr.1, pr1.2 - you can find it in Settings->Info), language and regional settings, other input methods installed and everything you think could make your phone different from others. Yours is the very first (and until now unique) bug report for the v0.1.7 and it would help a lot to have as many info as possible to fix your issue.
Kind regards,
Patrizio Bruno

Has the updating problem been solved?

My feed was approved earlier today, but I am having some problems getting my page on the iTunes store to update.
RSS: http://davefarmar.libsyn.com/rss
Storefront: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=210951638
(Note: I have already pinged iTunes per the spec. I have also already tested the feed via a manual subscription request through the iTunes pulldown menu and successfully received the updated files.)
Modifications made to my initial episode are not appearing on my iTunes store page.
A test post that I added has also not appeared at the store.
Has the updating problem, which I saw posted about shortly before the new year, been solved?
Thanks, Dave.

Looks like I just needed to be more patient (the updates have now showed up . . . sorry).

Nokia E71 Software update problem

I keep getting this message everytime I try to update my software, I did as the pop-up said, but that didn't help. Anyone got the same problem? Can someone help?
http://img232.imageshack.us/img232/6139/problemz.png
I got the newest versions of Nokia PC Suite and Software Updater.
When the pop-up comes and I do as it says it starts installing, but then the message pops on my screen again, everytime.
(Sorry for my english, I'm from Finland)

yaltek wrote:
Hello,
Thanks for the reply.I have done what you suggested, but it didn't help.
Nokia software updater somehow losts connection with the phone just right after the start of update http://img8.imageshack.us/img8/4476/ekranalntsq.jpg
After it losts connection and device gets stuck, we have this screenshot appears http://img35.imageshack.us/img35/724/ekranalnts2o.jpg
Meanwhile, phone freezes and you have to take the battery out and put it back in order to restart the phone cos power button doesnt function after freezing.
The last software update was done at a Nokia's sevice point. As far as i know they update firmwares in a different way than we do with nokia software updater. Would it be possible that it has something to do with this problem?
Your replies are very much appreciated.
Many thanks
yaltek
I see on both the screendumps that you have your browser (Firefox) running. If your bandwidth is small, the update from Nokia's server will be interrupted so close all applications except your updateprog. Close auto updates for Microsft and shut down (temporarely) the Firewall.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I did my ios7 update and lost all my old text messages, how do I get them back?

I did my ios7 update and lost all my old text messages, how do I get them back?

Try this
http://support.apple.com/kb/HT1414

Mail freezes when updating large RSS feed boxes

This is something I encountered and how I have formulated a work around. I have discovered that Mail will freeze when updating large RSS feed boxes.
A little history. After discovery RSS and how they work, I began building a collection of feeds. They included feeds from many major news providers. Over the years, the number articles form some of these sources went into the thousands.
As my database of articles grew, I encountered more severe and more frequent freezes of the application Mail. I began to take the computer off-line in order to work in these files. But inevitably, a situation would arise that would lead to the Mail application freezing.
Isolation of the issue with Mail and to the RSS boxes within Mail. The freeze would not occur when RSS feeds boxes where collapsed. Also, the freeze only affected the Mail application. Mac OS was not affected and I was able to alway close Mail from with in the Force Quit menu. Also, the Force Quit menu affirmed that Mail was indeed frozen by listing it as also "not responding."
Work around. To resolve this issue, I first choose to remove the number of RSS feed that I had subscribed to but used very infrequently. Second, I choose to delete old feeds from "never" to "every two weeks" from within the Mail preference menu (RSS sub-menu).
I think it took a while for Mail to fully delete messages older than two weeks. In fact, when I began deleting whole feeds, it took some time for those feeds to be removed from my mail box tree. Within the Activity Monitor application, I could see that a lot of disk use was occurring, even though the OS was allowing me to continue to use Mail and other applications.
To assist this process, I took my computer off-line and stepped away from it. Upon my return, the disk use was down to normal, the number of article in many RSS boxes where greatly reduced, and my disk had recovered over a GB of space. Also, Mail seems to be behaving properly, with smooth and quick performance.
If you found this article, I hope the information provided has been helpful! After a quick search in to previous posts, an entirely similar post was not found. However, others are finding the Mail application will freeze, but not necessary for the same reason.

Since I don't want to download any attachments from RSS feeds in Mail.app, is there any way to turn off the attachment download once and for all? I also get the beach ball for minutes when an item has a big attachment, and I fear my HD is cluttered with files I don't use.

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

PR1.3 Update Problem: lost feed

Similar Messages

Maybe you are looking for