PRAA in combination with central address management

Hello,
In our system we have central adress management activated. All the
personell nrs are entered with the correct address (sreetname and
housenumber in 2 separate fields). We use this information to create
the corresponding vendor numbers in FI (transaction PRAA).
However, with transaction PRAA both the address (streetname and
housenumber) are copied into one field (streetname). As a consequence,
the corresponding batch input session, which is using program SAPMF02K,
cannot automatically (in bcakground) create all the vendors, since we
always get a message about central address management. (Streetname does
not exist, because it wrongly contains both the streetname as well as
the housnumber.)
The field USE_ZAV which is automatically ENTERED in the background
processing of the SAPMF02K batch job, is causing this address check.
We think this is a bug.
Ideally the PRAA should be entering the streetname and housnumber in 2
separate fields in FI-vendor master data, of the automatic check of
field USE_ZAV should not be entered in this batch input background
processing.
Can you please give us some advice on how to deal with this situation?
Kind regards
Karinne Van Goethem
SAP Consultant - Holland Casino

XXX

Similar Messages

CRM - IS-M Central Address Management

Hi Guys,
Can we integrate CRM (7.0) with IS-M Central Address Management.
In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code.
CRM can download standard ERP Regional Structure (Address Management), but I'm not sure if and what type of integration we can have with Media Central Address Management.
Any inputs are welcomed.
Best regards,
Renato Petrulis

Close since no answer for so long.

Tcode for Central Address Managment

Hi
I've an issue with sending emails to external systems and i beleive i need to set the email address of the sender in central address management. Anyone is asare of how to maintain this email via transaction code only and not by coding !!!
i assume that this is done using SU01. is this correct? kindly guide
thkx
Prabhu

Hi,
Check this,
hope it helps,
Re: RFBIDE00 - Address data issue not populated
Re: T-Code(RZ20)
regards,
Pritha.
Message was edited by:
Pritha Agrawal

Multi-Site WAN With Centralized Call Manager

The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
Branch 1 = 420
Branch 2 = 256
Branch 3 = 385
Brnach 4 = 298
Branch 5 = 262
Branch 6 = 171
Branch 7 = 200
Branch 8 = 97
Branch 9 = 198
Branch 10 = 254
Branch 11 = 269
Branch 12 = 224
Branch 13 = 90
I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
What would be best deployment model for this type of scenerio along with VoiceMail and CER.

Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
So I will agree what people suggest here.
I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
They share voice box at Main site (Unified).
The rest of remote site use SRST for backup.
Large remote site with T1 PRI with SRST if WAN down.
Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
You can read the SRND here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
Hopefully, thats can help you.
Ken

CAM - Central Address Management

Hi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business area but not sure are they the correct one??
Thanks & Regards,
Swat

Hi All,
IR8A SG tax report is reading the employers address from CAM, i.e. Cental address management.
Can anyone share where are the nodes for CAM present in IMG...
On searching for CAM i get certain nodes under Business Partner but not sure are they the correct one??
Thanks & Regards,
Swat

Problem with email address management page (not re...

A couple of weeks ago I was moved to BT mail and I linked my BT ID to my main email address, as instructed. On the email management page, I linked six other email addresses, which I had previously had in BT Yahoo, using the ‘add to BT ID’ function. However, my main email address, which was the one I initially linked, also appears on the email management page, but with the ‘add to BT ID’ function still appearing. When I click on this, I keep getting the message: ‘Sorry, we haven't been able to claim that email address due to an error. Please try again later.’ This means that I am unable to have my main email address as my favourite, so when I log in, it always defaults to another one of my addresses. How do I fix this problem?

I found this, that may help - BTW, MEU is Mail Enabled Users:
http://social.technet.microsoft.com/Forums/exchange/en-US/470af578-53cc-45df-8a3e-b9ff16815cc7/exchange-2010-sp3-rollup-2-email-address-policies-not-applying-to-mail-enabled-users-but-working?forum=exchange2010

Update to Fax Number Required in Central Address Management

We are on 4.6C, also using SRM. A fax number is incorrect for a specific address in CAM, and needs to be updated. How do I make this change in CAM?

resolved

Function Module in Central Address Management

Hi,
Is there any function module which updates a filed in ADRC based on the customer number( KNA1) and again i need to update Email information in ADC6.
Actually i am creating a sales order and need to update Customer master.

resolved

Anyone know about centarl address management.

hi expert,
nyone know about centarl address management. how to use it in xdo1

Hi
Central address Managements stores the data in ADRC and other ADR* tables
These tables contains the entire address details of the Customers.
KNA1 may contain only few but these ADR* like ADRC contains all.
So when you create Customer usinf XD01, if you create address centrally these tables are filled.
Reward points if useful
Regards
Anji

Project System Cash Management in combination with statistical WBS element

Hi,
within a customer project, we have to solve the following issue:
Customer runs projects and statistical projects in combination with internal orders.
We want to use the PS Cash Management for planned and actual payments.
With statistical projects we have the following problem:
Invoice and actual payments will be processed with the transaction CJFN.
Actual payments are shown only on the internal order (transaction CJIA), but not on the statistical WBS element.
We want the information about the actual payments with in the project system reporting (S_ALR_87013574).
Projects, not flagged as statistical will deliver the expected results.
Many thanks for your ideas, to solve this problem.
Steffen

are u posting to some other cost object also. normally they wud have to be posted to a COPA also with the cost element being 11 category.
the wbs will receive the statistical posting, so there needs to be a real object also.
see whether the real object is getting derived.
the system is nt finding the real object and trying to post with the WBS in real, but since its statistical, the error.
any other calrifications. plz post.
regards
anantha

Using own SQLite DB in combination with Data Management

Hi,
Currently on a huge project we're we are using LCDS 3.1 in combination with a AIR 2.5 client.
I've been reading "Using Adobe LiveCycle Data Services ES2 version 3.1" and I have a question. In the chapter "Building an offline-enabled application" it says on the very first line:
"You can use an offline adapter with an AIR SQLite database to perform offline fills when a desktop client is disconnected from the LiveCycle Data Services server. An offline adapter contains the SQL queries for AIR SQLite for retrieving cached items like an assembler on the server retrieves items from the data source."
However, in my experience that AIR SQLite database is not just any DB but one that Datamanagment designs and generates itself, based on the Dto the DataManagement destination is managing. The offline adapter doesn't work like an assembler at all, because the documentation says you can only override the methods pertaining to constructing the WHERE, and ORDER BY parts of the queries, not the SELECT, CREATE, FROM,... parts.
In our case, we have a database on the server, constructed according to a very specific ERD, and we have a SQLite database on the client, also constructed according to a very specific ERD. What we want to do is execute every fill, create, update, delete against the offline cache and only synchronize with the backend when we want it the synchronize (technically possible by playing with the autoMerge, autoSaveCache, autoConnect,... properties). So what part of datamanagement can we customize to use our DB instead of a generated one?
Thx in advance!

You are correct in noting that Data Management does not allow you to use your own database to store offline data. This data is exclusively managed by the LCDS library for the developer. The intent is that the local cache is a reflection of the server data, not an independent copy.
If you have an existing database in AIR, then you will have much more direct control over the querying and updating of that data by using the SQLite APIs directly.
That being said, you can in essence replicate the data stored on the server, managed by Data Management, in the offline cache. In an upcoming release (winter 2011) we will have a few features ('briefcases' and a 'changes-only' fill) that will make this story even more compelling for your use cases. But even with the 3.1 functionality, you can do something like the following:
Perform a fill() to collect the data you want to have available on the client, save this in the offline cache
Construct an Offline Adapter Actionscript class that implements the fills you want to perform on the local data
Use the DataService.localFill() API to perform all of the client application fills, turn off autoCommit.
When the client is online, call commit() to store client changes and call fill() to refresh the cached data.
This should give you some ideas on how you could go about constructing your app to leverage the offline features of Data Services.
Tom

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

Desktop Manager fails to synch with Yahoo Address Book on my 8300

I have been synching both Yahoo Address Book and Yahoo Calendar successfully for months. Suddenly, Address Book no longer synchs. Yahoo calendar still works. The problem occurs aftew Desktop reads all the contacts. It halts while "Synchronization Progress...reading from Yahoo Address Book" displays. That message has displayed for up to an hour with no progress. I then disconnect and halt Desktop. I can still synch Yahoo Calendar. I have not updated desktop or device software. Anybody have any suggestions?

No Sync with Yahoo Address Book Workaround:
Work Around for Blackberry to Yahoo Sync when Address Book Sync Gets Stuck:
I've had the Address Book on my Yahoo Sync hang on two different occasions. The first time was late 2009 and the second was late Jan 2010. The first time the problem fixed itself. This time, no such luck yet. So if you are having the same problem, here's a work around that will allow you to update both your Yahoo and Blackberry Contacts and keep them in sync.
Step 1: From Yahoo, EXPORT your contacts to Windows Contacts (I did this in Vista and it also works for Windows 7 -- it should also work for XP, but the export may be a different expension). You will want to export using the 'vCard, Zip of .VCF files'. his will create a zip file of all your contacts with in the vcard format: (.VCF)
Step 2: Some manual labor in this step, but you will only have to do it once OR you can try a .vcf to .contact file converter program like:
http://www.vcardconverter.com/ that will cost you 19.95. Open each contact in the zip file. It will show you the contact data and there will be a button that you can click to ADD TO MY CONTACTS. Do this for each contact in the exported zip file. Or but the program.
You now have your Yahoo Address Book converted over to Window Contacts.
Step 3: In the Blackberry Desktop Manager change your synchronization setting for your address book from Yahoo to 'Window Address Book/Mail'. Leave the Calendar, MenoPad, and Task to sync with Yahoo. So you should have:
Calendar sync to Yahoo
MemoPad sync to Yahoo
Address Book sync to Windows Address Book/Mail
Task sync to Yahoo
Step 4: You now can perform a sync to you Blackberry Device. (But read the notes below first)
SOME IMPORTANT NOTES:
This allows you to get your contacts into your Blackberry and to sync them with your Windows Contacts. You can make this a three way sync where you also keep your Windows Contacts and Yahoo Address Book in sync. It just adds an extra sync. NOTE: If you are going to do this then pay the 20 bucks and buy the program above or find a program to convert .contact files to vcf (vcard) files. I've decided to buy the program above because it allows me to import and export all the contacts at one time, which is what you will need to use the import / export tools in Yahoo Contacts
I did the sync of the address book in steps. I was lucky / unlucky because I tried to do a Blackberry software upgrade that failed and it wiped out all of my contacts, calendar, tasks, and memos; so when I did my first sync, I when only from the Blackberry Desktop Manager to my Blackberry. I then changed my sync to be a two way sync. I only mention this because I don't know if going from Windows Contact to Blackberry would create duplicate entries in your Blackberry and Windows Contact Manager. Maybe someone can check this out and post. Anyway, I would suggest trying the sync with only a few contacts to check it out.
You don't need to worry about the folder that the Blackberry Desktop Manager will store the contacts. It assumes the 'Contacts' folder on you machine. As far as I could tell, there was no way to change this destination anyway.
ALTERNATIVE APPROACH:
If I was to do this all over, and I had my contacts still on my blackberry, I would most likely do the following (in theory):
Step 1.
Change the sync for contacts to be with Windows Address Book, not Yahoo.
Step 2.
Sync the contacts so they would appear in the Windows Contacts.
Step 3. Then worry about syncing Windows Contacts with Yahoo (see above)
Good luck,

DPM console not connecting . Error- Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345) DPM console not connecting

I am having problem connecting the DPM console to ther server. It gives me following error -
"Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345)"
The server is DPM R2 and the same console is working on one other computer.
Any idea how to solve the problem?
Thanks

Hi
Please make sure you have both versions of Microsoft Visual C++ 2008 Redistributable installed..
Also make sure you have .netframework 2 installed. If you look at the dpm logs it should say what is missing.

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

PRAA in combination with central address management

Similar Messages

Maybe you are looking for