PRAA - no batch input created
Hello Experts,
In ECC6.0 - transaction PRAA - we see the following error message "batch input session not created, message number 56_CORE016". This is only in our live system. In the test system, everything works correctly. So the vendor is created when the batch input session is executed. No problem.
Some more information: ,we also get the message data entry is missing in table V_T702N_A with argument 06.
Please can somebody help?
Thanks a lot.
Isabel
Hello,
We've found the solution: in ECC6.0 the transaction can not be executed online, but execute it in background and everything works fine.
Kind regards,
Isabel
Similar Messages
-
RFBIBL00 No Batch Input Created after Executing
Hello,
After Executing SAP standard report - RFBIBL00, no batch input session has been created in SM35 in ECC 6.0 version. There is no error message but one message displayed as 'PRODPER not transferred.'First the issue was in the input file.
Second Number of lines was more and in the report it was set less.
Third in check only there will no Batch Input session generates.
Fourth to create input file use SAP standard procedure i.e sxda_tools.
Note : From ECC, SAP not supporting Batch Input Method. -
LSMW Routing Standard Batch Input Create Batch Input Session
Hello All,
I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
I am facing this quite peculiar problem.
I have tried first with separate text file for every source structure. Everything works fine till convert data step.
But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
Expecting lightning fast replies from Gurus....
MimiriHello All,
I am awaiting your reply on this.......
Mimiri -
regards,
still need the t-codes for the following:
Batch Input: Physical Inventory document for cycle counting, vendor consignment,project stk and ABC Analysis for cycle counting. thanksIM level see:
MI01 Create Physical Inventory Document
MI02 Change Physical Inventory Document
MI03 Display Physical Inventory Document
MI04 Enter Inventory Count with Document
MI05 Change Inventory Count
MI06 Display Inventory Count
MI07 Process List of Differences
MI08 Create List of Differences with Doc.
MI09 Enter Inventory Count w/o Document
MI10 Create List of Differences w/o Doc.
MI11 Recount Physical Inventory Document
MI12 Display changes
MI20 Print List of Differences
MI21 Print physical inventory document
MI22 Display Phys. Inv. Docs. f. Material
MI23 Disp. Phys. Inv. Data for Material
MI24 Physical Inventory List
MI31 Batch Input: Create Phys. Inv. Doc.
MI32 Batch Input: Block Material
MI33 Batch Input: Freeze Book Inv.Balance
MI34 Batch Input: Enter Count
MI35 Batch Input: Post Zero Stock Balance
MI37 Batch Input: Post Differences
MI38 Batch Input: Count and Differences
MI39 Batch Input: Document and Count
MI40 Batch Input: Doc., Count and Diff. -
Hello,
I am having some problems with batch input authorizations. I want to give users authorizations only to delete the batch-inputs which have been created with their own user. I have seen the object S_BDC_MONI, but this object does not allow me to indicate that the user is only authorized to delete his/her own batch-inputs. Is there an standard authorization object that allows users only to delete their own batch-inputs?
I have also checked the possibility to create my own authorization object, the same as S_BDC_MONI but with a new field where I can indicate that only the own batch-inputs can be deleted. But if I do it will SM37 check this authorization? I don't want to indicate the user in this field, because then I would need a new role for each user. I need a field (similar to PSIGN) where I can say each user can delete only their own batch-inputs.
Any idea?
Thank you very much in advance.
Regards,
Maitethere's no solution to your problem, i'm sorry.
S_BDC_MONI only checks the name of the batch-inputs, not the creator or the username with whos authorization it is run.
creating your own object will only work if the calling program (SM35, SM37 ...) does the counterpart of the checking using authority-check. so simply creating an object and adding it to a transaction with SU24 will not work without the coding of the caller being adjusted. of course, this would be a major modification.
all you can do is to adjust your batch-input creating programs to apply those names to the batch-inputs that you can easily cover using S_BDC_moni. -
Batch input session from F.05 has an 'in processing' status
Hello all,
We would like to ask for advice regarding an issue that we are facing right now. We ran F.05 on 9/30/2008. This transaction should create a batch input
session and post revaluation at the end of the month and eventually
reverse them at the beginning of the next month. Unfortunately, as of
the date of the run, period 10 was not yet open. So, the results are
the following:
The batch input created, until now, has an 'in processing' status. 70
transactions were supposed to be processed (but not sure if this is
already the total or it still has some more to process -since we do not
have a record of the supposed number of postings). Now, period 10 is
already open and we are trying to reprocess the session, but it can't
be because of its status.
Looking at the transactions: total is 70 (but not sure if there are
still more to be processed supposedly). 35 transactions (pertaining to
the revaluation postings at the end of the month) have been processed and
their revaluation documents were already produced. 35 transactions (pertaining to the
supposed reversal on the first day of October) are in error because
period 10 was not yet open as of run date. No logs have been created (blank).
In the meantime, can we post manual reversals in October for the revaluation postings made in September? Is there a possibility that there are still revaluations to be processed for September? Let's say, instead of only 35, there are still more? Or another option: could we manually reverse the revaluation postings on September 30 and post on the same date, delete the batch input session (can it be deleted despite the status?), then run the revaluation transaction again for September?
Thanks in advance for your advice.
Regards,
PeterHi Peter,
Go to SM35 > Select the session in process > Release session (Shift + F4)
Now select the session again from "Overview" and process again in order to process the remaining documents. Ensure the period is opened.
This should resolve the issue. Let me know how it goes.
Rgds
Nadini -
HELP with a Batch Input - Transaction VF01
Hi
It's me again, with another question... this time it's a Batch Input, creating a delivery with more than 20 items, how can I do with the error
Field KOMFK-VBELN(69) does not exit in the screen SAPMV60A 0102
and if I click on OK-Code how to indicate (in code lines) to simulate the process <b>EDIT</b> (From Menu bar) <b>More Documents F7</b>
Thanks in advance!!!
TokioThanks to all of you...
These are my fist lines to answer one of my posted problems ...
Preview code lines:
perform bdc_dynpro using 'SAPMV60A' '0102'.
loop at entregas.
move sy-tabix to fila.
concatenate 'KOMFK-VBELN(' fila ')' into cadena.
perform bdc_field using cadena entregas-entrega.
IF FILA GE '20'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=P+'.
MOVE SY-TABIX TO FILA.
CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
ENDIF.
New code lines:
CLEAR ENTREGAS.
PERFORM BDC_DYNPRO USING 'SAPMV60A' '0102'.
LOOP AT ENTREGAS.
MOVE SY-TABIX TO FILA.
IF FILA LT 22.
CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
ENDIF.
IF FILA EQ 22.
CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
PERFORM BDC_OKCODE USING '=FKAN'.
PERFORM BDC_DYNPRO USING 'SAPMV60A' '0102'.
ENDIF.
IF FILA GE 23. BREAK FOSTKFRT.
DATA: FILA2(2), CNT2 LIKE SY-TABIX VALUE 2. MOVE CNT2 TO FILA2.
CONCATENATE 'KOMFK-VBELN(' FILA2 ')' INTO CADENA.
PERFORM BDC_CURSOR USING CADENA.
PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
CNT2 = CNT2 + 1.
ENDIF.
ENDLOOP.
CLEAR CNT2.
I hope these lines could help.
Regards
Tokio -
Error while creating a product group--Batch input error 9
Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
NileshHi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh -
Problems while creating a batch input
Hi Experts,
I tried to create a batch input program for the transaction CRMD_ORDER for some changes on to the configuration tab to enable the BOM to work. This cannot be done by the BAPIs. I have included the batch input program in a RFC enabled function module to do this job. I am getting the error control framework: fatal error - GUI cannot be reached and Runtime error RAISE_EXCEPTION has occured. This happens only in the mode N, if i re run the session with the other modes there are no problems.
I am call the function module through a method in the controller class.
Replies are highly appreciated.
Thanks in Advance.
Regards,
SuthagarHi Durai,
I tried that option too. Ufortunately the same error has happened. The problem is solved using 3 other function modules, by not using the BDC.
Appreciate your reply. Thanks!
Regards.
Suthagar -
Create batch input, does not include all records
Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs. -
How do I create a data set ready for a batch input session
Hi:
I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
Any clue would be great!!You just have to do:
BDC_OPEN_GROUP (Open new batch)
BUILD BDC DATA (Your own code)
BDC_INSERT (Insert BDC data you have built in step 2)
BDC_CLOSE_GROUP (Close batch)
This will just create a new batch and it can be processed in SM35.
To build BDC data:
LOOP AT your_input_table.
<<here you have to use the code generated from recording in trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
ENDLOOP. -
LSMW Batch Input Recording for Create BOM
Dear All,
I want to do LSMW for Creating BOM using Batch Input Recording,
I know that i have to make 2 time Recording, first for the BOM Header and second for the BOM item
For the BOM header i have done it, but for the BOM item i got some trouble with the item number (POSNR),
when i run the LSMW, for the first item (item 0010) was success, but for the item 0020, it can't work and i got error
message " NO BATCH INPUT FOR SAPLCSDI 0150"
How is the recording step by step for BOM Item so the Item number can increase well?
Very need your help,
Regards,
MarufatHello Santosh,
Thanks for the reply,
I already check in SM35 where i also thought that the main problem is about adding the new item number,
but when i tried to do repeat recording, i can not find any entry for adding the line item, so the line item after 0010 cannot be input
Is there any solution?
Regards,
Marufat -
Problems retriving the asset created in a batch input using Abnan
I created a batch input program that use the transaction ABNAN. I need to create a report with all the assets created and their respective documents in the batch input. However, that information is not given in the messages that are retrieve when the transaction is called. I use the following code:
CALL TRANSACTION tcode USING bdcdata
MODE call_mode
UPDATE update_mode
MESSAGES INTO messtab.
At the end of this, messtab have a message id that correspond to this message:" text was saved".
The asset number and the document # is given in a pop up message that appear when the person press save. This message is not included in the batch input.
How can i get the asset created and its respective document?Hello Orlando
Please refer to the ABAP documentation for "CALL TRANSACTION":
CALL TRANSACTION 'ME21' USING BDCTAB
MODE 'N'
UPDATE 'A' " asynchronous !!!
MESSAGES INTO MESSTAB.
CALL TRANSACTION 'ME21' USING BDCTAB
MODE 'N'
UPDATE 'S' " synchronous -> like COMMIT WORK AND WAIT
MESSAGES INTO MESSTAB.
Regards
Uwe -
LSMW - Error in Inventory - Create batch input session
Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
<b>Sequential file mmgoods cannot be opened
Message no. M7 850</b>
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juango to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen -
Batch Input file is not created for the program RFUMSV00 (VAT)
Dear All,
Yesterday we run the program RFUMSV00 for posting VAT entries. But program dosnt created any batch input file. We tried to create the file once again by running the program, but there were no data;s on it.
I can able to view the spool which is created in SM37. It is in the finished status.
Can you please advice, do I need to delete any table entry for this like BSET etc....or how I can create the batch file again by ruuning the program. I dont want to post manually through FB41 transaction.
Is there any Standard SAP solution for this.
Please let me know anybody need any clarification about this question.
Thanks in advance.
Regards,
Raja.A
Edited by: Raja.A on Dec 1, 2009 12:47 PMHi,
Check the status of the batch in SM35 transaction.
if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
To Release -Shift+F4.
Also you can analyse the job status through F2 button.
Bye
Maybe you are looking for
-
How to delete columns in table control (tab Services) for transaction ME51
Hi, gurus! We're facing this problem in our upgrade: we have a batch input (ME51) in order to create purchase requisitions, but we get an error with the dynpro data (program: SAPMM06B, dynpro: 0102). We are sure we populate all the required fields in
-
Form with text moving in between form fields
I am researching if this is even possible. I have this sentence: My name is FORM FIELD and I am your FORM FIELD. Is it possible to make the 'and I am your' flow with the form fields but cannot be edited? Thank you! tbrooks210
-
Connect to oracle database with visual studio 2005
Hi, i have a oracle database called orcl (10.2). I am trying to connect with this database with visual studio 2005. I do this: In Server Explorer, right click in Data Connection and click in add connection. I choose oracle database and oracle provide
-
URL Link in SE38 Documentation
Can any one explain me how to add URL Link in SE38 -> documentation ? if you share step by step then it would be great. Thanks Seshu
-
TS4532 The best solution is downgrade to iOS 5.
downgrade!