Praveen kumar J : 2LIS_02_SCL,ITM,SGR,SCN,CGR and 2LIS_03_BX,BF,UM

I have summed up all my issues in this post:
1. 2LIS_03_BF
I was able to see records once I ran OLI1BW in RSA3 but when I am loading it into 0IC_C03 it is showing
"added records" as 0.
2. 2LIS_03_UM
When I execute oLIZBW ,I enter the company code and the run name and a future date , I get a message plant is not valid. So when I enter plant in place of company code , it asks for archiving run . So when i enter archiving run as '1', it gives a message " No files exist"
3. 2LIS_03_BX
When I execute MCNB , I get a message " Inactive enhancement for BW extraction. Extraction not possible"
4. 2LIS_02_CGR
In RSA3 it is showing 0 records extracted
5. 2LIS_02_SGR
In RSA3 it shows 146 and in 0PUR_O01 it shows 146 as transferred and added as 93
6. 2LIS_02_SCN
In RSA3 ,it shows 62 and in 0PUR_O01 it shows 62 as transferred and added as 17.
7.2LIS_02_ITM
In RSA3 , it shows 991 records
but when i load it into 0PUR_C01 , it shows tranferred as 1190 and added as 426 and when I load this into 0PUR_O01 it shows transferred as 1190 and added as 0.
8. 2LIS_02_SCL
RSA3 shows 991 , when I load into 0PUR_C01 , it shows transferred as 958 and added as 0.
Message was edited by: subba rao
Message was edited by: subba rao

Hello Subba Rao,
1. Please check your update rules, see if there is anything in your start routine which is deleting or restricting the data. Check if data is coming to PSA properly. I would suggest you simulate the updation and check whhat exactly is happening.
2. It says no file exist because you have selcted archiving run. It is done when you want to load your history data from archive. That is not the case here and hence the message. Regarding the plant error, I am clueless, will update you if I find something on that.
3. Check the enhancement, there might be some error on the code and the code may be inactive.
4.If you are getting data for other purchasing datasources, then you are in good shape. CGR pulls data from EKBE and EKES, check those tables.
5.No issue here as data with same key will be added up.
6.Again no issue here.
7. C01 seems to be fine. Check the update rule for O01 and simluate the updation and see.
8. Again I would suggest to look into update rules.
Regards,
Praveen

Similar Messages

How to logon to the Career Center using you SCN username and password

We all know how painful it is to have to create yet another username and password for a site, well for the Career Center you don't have to. We are working to have single sign on between SCN and the Career Center but until that time or if you navigate directly to the Career Center site you can log on using your SCN username and password via OpenID. Here is how.
First, ensure you have set an OpenID username in your SCN profile.
Then go to the Career Center http://scncareercenter.jobtarget.com and click
"Access Your Job Seeker Account" for job seekers OR
"Access Your Employer Account" for employers
At the bottom of the login box, besides "Have an OpenID?" click on the "Sign In" link
In the box type
http://openid.sap.com/your_open_id_name_from_your_SCN_profile
and click Login.
You will be taken to another page on SCN requesting you to login (if you haven't already) and finally approve the JobTarget OpenId login request.
Viola, you are then brought to your personal account on the Career Center. If this is your first time use, you may need to fill out some necessary pieces for the Career Center account profile.
Update 24.08.09: We are having some intermittent OpenID issues, will update the post when it is resolved
Cheers
Kuhan

That's really good news!
Now we have additional link to suggest newbie or job seeker in ABAP
P.S. Can you please amend in Forum Rules of Engagement with this information to let the others know?
Cheers

Extraction to BW Error Purchasing Data 2LIS_02_SCL&ITM - Key Fig. in blank

Hello,
we start the Purchasing landscape (Header and Item: 2LIS_02_SCL and 2LIS_02_ITM) some moths ago, and we check that all purchases are correct in BW, after Setup, and after several daily delta loads. To start the landscape, we fill the "Determine Industry Sector" (Standard), we set the option "Business Information Warehouse" in transaction BF11, and fill the table "Transaction Key SAP BW" with all values for purchasing.
After another delta initialization in October, we detected that in 98% of purchases the key figures are in blank; We see that in all wrong registers from R/3 to BW: Application component and Process Key are in blank, too. For that we think we have a problem with this table, TMCLVBW. We see that in report SAPLMCRS, after function LOG_CHECK_PROCESSKEY, it the system didn't find the process key, it clear key figures, but we didn't change anything in MM customizing, and we don't know which is wrong in our table TMCLVBW.
We try to find an OSS notes, but we didn't find anything clear. Someone has the same problem ?
Thanks in advanced.
Best Regards.

Hi,
try to delete double entry for process "00001120" in TPS31 table.
Best regards.

ITMS Ignoring FeedBurner Link and Pulling Underlying Feed

Hello all,
I am running several podcasts in the iTMS via FeedBurner.
My blogging software is WordPress 2.04. I am using the PodPress plugin 6.7 for adding mp3 files into posts. I then take the WordPress / PodPress generated feed and hand it over to FeedBurner. I then have the FeedBurner feed toss over to the iTMS.
So, for example, the Criminal Law podcast is generated by WP / PP at http://www.lifeofalawstudent.com/category/1l/criminal-law/feed/ , tossed over to FeedBurner via http://feeds.feedburner.com/LoaLSCriminalLaw , and that FeedBurner feed is linked to the iTMS at http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=215665692 .
I actually have about 20 feeds, but unfortunately PodPress is built with the assumption you are only using your blog for a single podcast. As such, I must specify a single title for all feeds. For now, I have "Life of a Law Student" as the title supplied by WP / PP.
Within FeedBurner, I have Title Burner activated on all of the feeds. For Criminal Law, I have "LoaLS: Criminal Law" as the desired title, as opposed to the generic "Life of a Law Student".
When I look at the XML of FeedBurner, the title is set as "LoaLS: Criminal Law". However, when I look in the iTMS, all of my podcasts have "Life of a Law Student" as the title. Additionally, when I subscribe to the FeedBurner feed via the iTunes player (ie Advanced -> Subscribe to Podcast), I am also given the generic "Life of a Law Student" title. (However, if I subscribe via Google Reader or BlogLines, I get the correct title of LoaLS: Criminal Law.)
As a side-note, even though Apple sent me the confirmation email stating that http://feeds.feedburner.com/LoaLSCriminalLaw was the podcast feed, when I ping the feed at https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=215665692 the WP feed is listed, instead of the FeedBurner feed. (This does not explain why I'm getting the generic title when I subscribe to the feed manually, though.)
Any help would be greatly appreciated. Additionally, let me know if you need more technical details.
- Neil
PowerBook G4 12" Mac OS X (10.4.8)

The image is correctly referenced in the feed and there is a suitable image at that address. It's not unusual for the Store to take some days to show the image after the podcast has been accepted - it's cached, and for some reason it's slower than updating episodes. Unfortunately changing the image URL may have delayed things. I should just wait it out - it will probably turn up eventually.

Logistic Data source and loading sequence

Hi Gurus ,
Can anyone help me explain the use of the 2lis_02_CGR and 2lis_02_SCN.
I also need to know the data loading sequence for the following data source
2lis_02_HDR,
2lis_02_ITM,
2lis_02_SCL,
2lis_02_ SGR,
2lis_02_ CGR,
2lis_02_SCN
Thanks for your help

Hi,
i.Purchasing Data (Header Level)
Technical name: 2LIS_02_HDR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
ii.Purchasing Data (Item Level)
Technical name: 2LIS_02_ITM
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
iii.Purchasing Data (Schedule Line Level)
Technical name: 2LIS_02_SCL
Technical Data
Type of DataSource:
Transaction data
Application Component:
Materials Management (MM)
Available from OLTP Release
SAP R/3 4.0B
Available from Plug-In Release
PI 2000.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource extracts consistent basic data for analyzing purchasing documents to a BW system.
Delta Update:
A Delta update is supported. Delta process: ABR Complete delta with deletion indicators using delta queue (Cube-compatible).
iv.Allocation - Schedule Line with Goods Receipt
Technical name: 2LIS_02_SGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the schedule line quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
v.Allocation - Confirmation with Goods Receipt
Technical name: 2LIS_02_CGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the confirmation quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
vi.Allocation Confirmation with Schedule Line
Technical name: 2LIS_02_SCN
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
The DataSource is used to extract the schedule line quantities allocated with confirmation quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
If it helps assign points.
Thanks,
Akshay a.

Problem in BDC for TCode S_ALR_87013620

Hi Gurus,
I have recorded the BDC for TCode S_ALR_87013620.
Executed the report S_ALR_87013620 by providing necessary details.
Displays the report and then clicked on Report-> Print -> PrinterNa
But when I execute through program it does not work. UNable to view Screens for Report-> Print->Printername
screens.

Hi Praveen Kumar
Go TCode S_ALR_87013620
In Program --> execute and print (Shift+f1)
this will execute and print your report..
i think ....no need BDC for printing i guess.....
Thanks
Ramesh

Difference Between 2lis_02_itm & 2lis_02_scl

Hi All,
My client here does not use schedule lines. But we realized that process key 7 was not captured by 2lis_02_itm and had to implement 2lis_02_scl to cater this deficiency. I went on with the assumption that SCL will capture all events that ITM captures except for Quotations and Contracts (Which my client does not use). But when I extracted data in high volumes thru ITM and SCL and did a comparison between the two, I realized that SCL captures limited data.
My question here is :
What is the basic difference between the extractors in terms of events that they may capture. Lets take for example the event for PO create/change - Does the extractor function differently when one creates or changes a regular PO?
Thanks.

Thank you for the reply Anil. I understand that ITM extractor captures the following events :
PO/GR/IR/Quot/Contracts whilst SCl capures PO/GR/IR. For this do you agree that SCL will catch all events of ITM except for Quot and Contracts. So if a PO were to be created or changed then both the extractors shoudl capture the events. But in my case it does not see happen. ITM captures it but SCL does not.

In case of Control File Failure, Create Control File cmd how get scn?

The following lines i picked from the
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5033895918209
======================================================
1. We can use the 'alter database rename ' at mount stage to rename any datafile. Or is it not possible to rename the system datafile like this? Why?
2. What happens to the SCN information in the controlfile when a controlfile is recreated? How will the database sync the SCN with that of the datafiles?
If I issue a 'backup controlfile to <file>' at 8 am and then restore that controlfile binary backup at 10 am and try to open the database, it will give me a control file old error. I understand that it is because the SCN is not in sync. But if I issue a 'backup controlfile to trace' at 8 am and use that script to recreate a new controlfile at 10 am, why doesn't I get the error? Where does it get the SCN information then?
So what is the use of taking a binary copy of the controlfile. Looks like having a 'backup controlfile to trace' script is better than a binary backup. Do you agree? Why/whynot?
Followup August 16, 2002 - 2pm US/Eastern:
1) you could but I just always did it with the create controlfile statement.
When moving system -- I do it that way
When moving ANY OTHER tablespace -- i just offline it, move the files, rename the files online it.
2) it just happens.
The control file you create will read the files to figure out what is up.
I agree, I've never used a binary controlfile backup myself.
=========================================================
My Question- In the Point2 above "Where does it get the SCN information and how control file do SCN Sync with data files?
"

1. The CREATE CONTROLFILE reads SCNs from the DataFiles. If the
database was last shutdown, all the datafiles are "non-fuzzy" and have the same
SCN (as of the shutdown checkpoint), If the database or some of the files are from
are hot backup, you cannot open the database because the SCN of some files is
older (lower) than others -- that is why a RECOVER (DATABASE or DATAFILE) is
required.
See http://web.singnet.com.sg/~hkchital/Incomplete_Recovery_with_BackupControlfile.doc
2. I'm not sure I agree with Tom Kyte's response
"I agree, I've never used a binary controlfile backup myself. "
to the question
"So what is the use of taking a binary copy of the controlfile. Looks like having a 'backup controlfile to trace' script is better than a binary backup. Do you agree? Why/whynot?"
If you have lost your database (storage/filesystem failure) and all your datafiles are lost,
you cannot simply do a CREATE CONTROLFILE from a Trace -- because the
CREATE CONTROLFILE has to read and verify all the datafiles specified in the
CREATE statement. If you have an RMAN Repository, you can use that to restore
your database files but otherwise, the RMAN information about backups and backupsets
are in the binary controlfile.
That is why it is important to take binary controlfile backups either manually or
using RMAN or using CONFIGURE CONTROLFILE AUTOBACKUP ON.

2 iTM accounts on the same computer

Hello community...
I have an imac at home with several accounts on it with each their itunes settings and itunes accounts.
I have installed iTM on my itunes and apple ID. My wife would like to have her own iTM as well but when we apply for it on her account (and her own itunes account), it says that there is already an iTM on this computer and I am not sure I understand the warnings they are giving. So here are my questions:
- what does the warning mean?
- can she have her own iTM as well without creating conflicts with mine so that both of us can use iTM on our own devices (iphone, ipad, etc.)
Thanks a lot in advance for your help

Regretably, no, it is not possible to have more than one iTunes Match account enabled on more than one iTunes store account ID that is on the same computer. Since iTM can have up to 5 computers (for a total of 10 "devices) associated with one account, the same computer can not be associated with two different instances of iTunes Match.

2LIS_02_SCL loaded to DSO

Hi,
I have just started up a purchasing project.
According to SAP standard solution 2LIS_02_SCL is loaded into DSO's with a key containing: Document, Item, Schedule line.
However, as far as I can see, a lot of info is lost in that concept.
Ex. for the following field in the extractor:
BWGEOO u2013 Purchase Value in Order Currency
The value contained in this field depends on the information stored in the field BWVORG (BW Transaction Key).
The field determines if the value is derived from a purchase order, a goods receipt, or an invoice.
From the top of my head, it therefore seems profitable to use a DSO with a key that ALSO contains the BW Transaction Key.
In that way BWGEOO holds the Order value, GR Value ot IR Value, depending on the whether BWVORG is 1, 2 or 3 (3 records)
In the SAP standard setup BWGEOO just holds the value for the last event (one record).
However, are there any pitfals in that approach?
Thanks in advance.
Lars

Hi Lars,
As Elangovan Subbiah suggested, keyfigure model is better to reduce no of records.
3 key figures for Order value, GR Value ot IR Value.
One more: As datasource: 2LIS_02_SCL is ABR delta capable and should load to CUBE or ODS in Addition mode only. If you are loading in Overwrite mode, you need to be very careful.
Please check: [Purchasing Data (Schedule Line Level)|http://help.sap.com/saphelp_nw04/helpdata/en/8d/bc383fe58d5900e10000000a114084/frameset.htm]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Video Podcast not showing up in Category listings on ITMS

I've created a video podcast, submitted it to ITMS, it was approved and has been available for 2 weeks now.
My main category is INVESTING.
When I search the ITMS for my podcast by name, two of the three formats (iPod & iPhone) of my podcast are correctly listed (the HD version is curiously not listed in a search, but is available using the link provided by the ITMS).
But, when I browse the INVESTING category, none of them are listed.
When I view my podcast in the ITMS after searching for it, the categories appear to be set correctly (INVESTING, TRAINING) in each of them.
Why? What can I do to have it listed in the Category browse windows?
Thanks!
Doug
Message was edited by: Doug Forman

Sorry to say, but the "browse" feature in the iTMS seems to be on the fritz, with no immediate fix in sight. The category/subcategory listings appear to have a limit on the number of podcasts that are able to be displayed (about 1000), so until this is fixed or iTunes cleans house and gets rid of dead podcasts, you are unfortunately out of luck. Welcome to the club.

How to enforce SCN of a datafile to the latest value?

Hello,
I try to restore old contents of my database on another server. The DB is not (and never was) in ARCHIVELOGMODE, and I have 2 cold backups of it. Neither backup set is complete (due to recycling of old tapes), but I still can restore all datafiles, though to two different SCNs. Out of 38 datafiles, 35 have SCN = 2458610942 and 3 have SCN = 2448133391.
SQL> select checkpoint_change#, count(1) as cnt from v$datafile_header group by checkpoint_change#;
CHECKPOINT_CHANGE# CNT
2448133391 3
2458610942 35
I believe, these 3 datafiles should still have usable contents, and hence would like to open DB as is.
RMAN> recover database;
Starting recover at 04-FEB-13
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
starting media recovery
RMAN-08187: WARNING: media recovery until SCN 2448133391 complete
Finished recover at 04-FEB-13
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 02/04/2013 18:17:06
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/oradata/GENERIC/system01.dbf'
Of course, there is no archived logs to update these 3 tablespaces.
Can I enforce SCN of these 3 datafiles to the latest value 2458610942? Or should I do something else?
Thanks already for your help!

user522816 wrote:
_ALLOW... sounds great! A description, please? docs, blogs...You need to be EXTREMELY AWARE that that parameter is classified as a hidden, udocumented parameter for good reason. If you don't know exactly what you are doing with it, you run a huge risk.
Your question is yet another classic case of focusing on some pre-concieved (and most likely, ill-conceived) solution to some un-stated business problem. If we knew that problem, we could give better advice than the dangerous use of hidden, undocumented parameters.

Unable to paste images in SCN document

Hi Team
I am able to copy an image from word document and trying to paste it on SCN while creating a wiki document. However, it is not allowing me to directly paste, even though I was earlier able to do it. Can you please advise on this ? I have got around 15-20 images that need to be used while I am creating SCN document and inserting each image individually is getting too tedious a task. Please help. Thank you.
Regards
Neha

Hi Dev
Yes the issue got sorted out now. I checked under the known errors list, but could not figure out these browser compatibility issue under the list. Any clue if this issue is being worked on ?
Thanks again for your help.
Rgds
Neha

2lis_02_scl and 0vendor

Hi Guys
I am new in BI and R/3. I have to extract 2lis_02_scl and 0vendor from R/3 to BI. Then i have to load data for 2lis_02_scl upto cube in BI and create new info object for 0vendor and load the data upto it. Could you guys help me out and give me a detail instructions for it please?
Regards
Shahriar

Hi ,
Do as follows.
After replicating the datasource in BW side, need to to one more step like assign Datasource to Infosurce.
Right click on datsource and Select assign Datasource to Infosurce.
ELSE
Refresh the Infosource area.
So u can able to see Infpsource under respective area.
First try with the Initial approach,If doent work goahead with second approach.
Hope it will helpfull for u.
Cheers,
Chandu.

SCN badge Idea- what should be the correct steps?

Respected Moderators,
I have submitted an idea in the idea space, here it is: SCN badge for SAP Certified Consultants : View Idea
I am confused what to do more:
like there is a table as : SAP Idea place: known issues in 'SCN Innovation and Enhancements' session
Should i need to edit the table and include my submitted idea in a new row?
Your suggestion will be greatly be appreciated.
BR,
Aparajit

Hello Aparajit,
the SAP Idea place: known issues in 'SCN Innovation and Enhancements' session-document is not for promoting new ideas, but a way to keep track of stuff that isn't supposed to be in the SCN session of the Idea Place.
Like already mentioned all you can do now is wait to see, how the other users will rate your idea. You can of course promote it through an status update or via twitter, if you like.
Regards,
Steffi.
Regards,
Steffi.

Praveen kumar J : 2LIS_02_SCL,ITM,SGR,SCN,CGR and 2LIS_03_BX,BF,UM

Similar Messages

Maybe you are looking for