PRC: Create Accounting Output shows "xml version="1.0" encoding="UTF-8"

I m getting Error in the Output of Create Accounting like <?xml version="1.0" encoding="UTF-8" ?>
Any one have some Clue ...

Hi,
It is a bug, and an enhancement request (6354170: ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES) was created for this issue. Check Metalink and see if the patch is released or not, or you may log a SR to confirm the status of this bug with Oracle support.
Bug# 6354170 - ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=6354170
Regards,
Hussein

Similar Messages

?xml version="1.0" encoding="UTF-8"? in my output

Hi,
I am parsing an XML file Using XSL.
BY using this:
transformerFactory tFactory = TransformerFactory.newInstance()
Transformer transformer = tFactory.newTransformer(new StreamSource("my.xsl"));
StringWriter sos =new StringWriter() ;
transformer.transform(new StreamSource("myyl.xml"), new StreamResult(sos));
I m able to parse but I am also getting <?xml version="1.0" encoding="UTF-8"?> in my output.
Could you please tell me how I can avoid it. Thanks!!

Hello Soumya,
Good to know it worked, I have got some doubts of using XPATH have U ever worked on that, let me know.
Bye,
Sam Mathew

Why ' ?xml version="1.0" encoding="UTF-8"? ' is not appearing in XML ( 9.2)

Hi,
I am using following SQL query to generate output from XML
select
XMLTYPE
('<?xml version="1.0" encoding="UTF-8"?>'||
xmlelement("bank",
XMLATTRIBUTES('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
'http://www.XXXX.xsd' AS "xsi:nonamespaceSchemaLocation" ),
xmlelement("Transaction",
xmlforest(
intraday "MessageCode",
actnum "ToAccountNo",
v00090 "ToBranchCode",
v00230 "CurrencyCode",
amt "Amount",
trandt "TransactionDate",
valuedt "ValueDate"),
xmlelement("CustomerRefNo",
xmlforest(
utr_number "ReferenceNo1",
ref1 "ReferenceNo2",
ref2 "Custtype",
r1 "SequenceNo"
x1
from
It is working fine but '<?xml version="1.0" encoding="UTF-8"?>' it is not coming as header of output My output is coming like
<bank xmlns:xsi="http://www.w3.org/2001/XMLSchema" xsi:nonamespaceSchemaLocation="http://www.XXXX.xsd">
<Transaction>
<MessageCode>0100</MessageCode>
<ToAccountNo>012340123456</ToAccountNo>
<ToBranchCode>01234</ToBranchCode>
<CurrencyCode>INR</CurrencyCode>
<Amount>11.00</Amount>
<TransactionDate>2007-01-15T17:54:31</TransactionDate>
<ValueDate>2007-01-15</ValueDate>
Kindly help.
PJP

Try using the XMLRoot function.
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb13gen.htm#sthref1566

How to remove ?xml version="1.0" encoding="UTF-8"? .

HI Experts,
i am doing one scenario file to file . in soruce payload i have <?xml version="1.0" encoding="UTF-8"?> . i want to remove <?xml version="1.0" encoding="UTF-8"?> at target side. is it possible .
regards,
alekhya.

Hello,
i want to remove <?xml version="1.0" encoding="UTF-8"?> at target side. is it possible .
You can use XSLT and add
<xsl:output method="text" version="1.0" encoding="UTF-8" omit-xml-declaration="yes"/>
in your output declaration
Hope this helps,
Mark

Remove ?xml version="1.0" encoding="UTF-8"? from xml file

I have generated an XML file using sax paraser. In the XML file thats generated I have the version and the encoding line
<?xml version="1.0" encoding="UTF-8"?>which is automatically generated in my XML file. Is there any way that I can avoid that from the XML file thats generated.

try
                        FileWriter fr = new FileWriter(new File(path, fileName));
                        Document docNode = docNodeMap.get(name);
                        XMLOutputter outputter = new XMLOutputter();
                        outputter.output(docNode, fr);
                        fr.close();
                catch (IOException e)
                        e.printStackTrace();
                }this the code generating xml file.

Adding " ?xml version="1.0" encoding="UTF-8"? " in generated xmls

Hi,
I am using xmlbeans framework to generate xmls , i am able to generate xml using document object but header "<?xml version="1.0" encoding="UTF-8"?>" is not coming in that xml file , how to include this in output xml files.

Hi,
I don't know the XMLBeans Framework, but this header is called XML declaration.
In general there are options to configure this (i. e. setOption("omit-xml-declaration", false);).
Anyway, I don't know the exact syntax in this framework but have a look at this, maybe it helps somehow.
http://xmlbeans.apache.org/docs/2.0.0/reference/org/apache/xmlbeans/XmlOptions.html#setSaveNoXmlDecl()
Best Wishes
esprimo

Printing ?xml version=\"1.0\" encoding=\"UTF-8\"? at the top of my xml

Can anyone spot where I'm going wrong?
I'm creating a DOMDocument like this:
Document document = null;
DocumentBuilder doc_builder = null;
try
doc_builder = factory.newDocumentBuilder();
catch(ParserConfigurationException e){/* deal with exception*/}
document = doc_builder.newDocument();Adding various stuff to it, then saving it like this
Source source = new DOMSource(document);
Result result = new StreamResult(idx);
Transformer xformer = TransformerFactory.newInstance().newTransformer();
xformer.setOutputProperty(OutputKeys.METHOD, "xml");
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes"); //??????
xformer.setOutputProperty(OutputKeys.ENCODING, "ISO-8859-1");
xformer.setOutputProperty(OutputKeys.INDENT, "yes");
xformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
xformer.transform(source, result);All the usual stuff.
But how do I get it to write:
<?xml version=\"1.0\" encoding=\"UTF-8\"?>
at the top of the page?
One further thing...
If I have nothing to write in my xml file, it just spits out a blank file.
Instead, I want it to write:
<?xml version="1.0" encoding="UTF-8"?>
<upIdx/>
a simple:
document.createElement("upIdx");doesn't appear to do anything if the block "upIdx" is subsequently empty.
Many thanks

duugggh....
(well it is friday evening.. ... long week.. all that kind of stuff)
how stupid of me....
to answer my own question, it was here:
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no"); //??????
xformer.setOutputProperty(OutputKeys.VERSION, "1.0");
xformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");

XML - including: " ?xml version="1.0" encoding="UTF-8"? "

When I parse an XML document and output:
#xmlCode.XMLRoot.property.autoID#
I get this line before every field: <?xml version="1.0"
encoding="UTF-8"?>
eg.
<?xml version="1.0" encoding="UTF-8"?>
<autoID>19</autoID>
<?xml version="1.0" encoding="UTF-8"?>
<autoID>53</autoID>
<?xml version="1.0" encoding="UTF-8"?>
<autoID>59</autoID>
How do I stop this? I just want the number from the field.
I also don't understand why it is UTF-8 when I specify
iso-8859-1.

If you use the CFXML tag, you dont need to do the <?xml
version='1.0' encoding='iso-8859-1'?> line in your code. It will
do it for you automatically.
Remove it and it should be fine.
EX:
<cfxml variable="rsPropDataXML" casesensitive="no">
<allData>
<cfoutput query="rsPropData" maxrows="20">
<property>
<autoID>#rsPropData.autoID#</autoID>
<Tour>#rsPropData.Tour#</Tour>
</property>
</cfoutput>
</allData>
</cfxml>

Append messages with out header tag " ?xml version="1.0" encoding="UTF-8"?

Hi all,
I am doing file to file scenario.When I use APPEND in the File adapter it is also adding <?xml version="1.0" encoding="UTF-8" ?>
I need to send a file for every 10 minutes consolidate all files and send at the end of the day.
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
The next time when i send the file with different< ID>31155</ID>
it should append ignoring <?xml version="1.0" encoding="UTF-8" ?>
The consolidated file must look like this...
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
< ID>31155</ID>
Thanks ,
Srinivas

Hey
as pointed out by everyone else,there is no straight way for this,one thing u can do is that create two separate scenarios.
in first scenario use content conversion on receiver side and keep on appending the text for 10 mins (guess this is ur pooling interval),now since ur using FCC u wont get <?xml version="1.0" encoding="UTF-8" ?>,you will get a flat file on receiver side.
after 10 mins u can have one more scenario which picks up this flat file and this time use FCC on sender side so that it will convert this flat file to XML,in this way you will get <?xml version="1.0" encoding="UTF-8" ?> only once.
hope this solves ur problem.
just make sure that you specify correct polling intervals for both the scenarios.
thanx
ahmad

SmartForm Spool: Line missing: ?xml version="1.0" encoding="utf-8" ? sf

Hello all,
The spools of a SmartForm that I developed are missing the line:
<?xml version="1.0" encoding="utf-8" ?><sf>
The spool starts with:
<smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
The Functional Counsultant wants the spool to look like:
<?xml version="1.0" encoding="utf-8" ?><sf><smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
Only such a spool can be printed successfully. If the line is missing, no print out can be taken.
Could you please tell me what settings need to be done in order to see the missing line in the spools?
Thanks and regards,
Ameya
Edited by: Ameya_Tulpule on Mar 9, 2011 8:58 AM

hii,
http://help.sap.com/saphelp_nw70/helpdata/en/a5/28d3b6d26211d4b646006094192fe3/content.htm
Go to this link click under Activating XSF Output
statically
dynamically
Overriding the Output Format
Desired Output Format
Settings for Overriding
Standard output
(OTF)
XSFCMODE = 'X'.
XSF = SPACE.
XDFCMODE = 'X'.
XDF = SPACE.
XSF
XSFCMODE = 'X'.
XSF = 'X'.
XDFCMODE = SPACE.
XSF+HTML
XSFCMODE = 'X'.
XSF = 'X'.
XSFFORMAT = 'X'.
XDFCMODE = SPACE.
XDF
XDFCMODE = 'X'.
XDF = 'X'.
XSFCMODE = SPACE.
Matching Parameters for Static Attributes
Output Format
Input Field in Form
Parameter of Structure SSFCOMPOP
(possible settings)
XSF
Output mode
(for XDFOUTMODE='S')
XSFOUTMODE ('S'|'A')
Output device
XSFOUTDEV
XSF+HTML
Output mode
XSFOUTMODE ('A')
BSP page/URL
XSFACTION
XDF
Output mode
XDFOUTMODE ('S'|'A')
Output mode
(for XDFOUTMODE='S')
XDFOUTDEV
regards,
Sridhar.V

Append with out duplicates ?xml version="1.0" encoding="UTF-8"? in receiv

Hi,
When I am Using append mode in file adapter,for each file that i send a seperate <?xml version="1.0" encoding="UTF-8"?> tag is getting generated in the target.
eg:
File 1
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
File 2
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Result
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Here <?xml version="1.0" encoding="UTF-8"?> tag is repeated.
How to remove the same from 2nd time.so that my output file is displayed as follows
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<DEPT>
<name>e2</name>
</DEPT>
Thanks in advance
sree

Hi
Did you check the occurence of DEPT Node as 0..unbounded???
Did You check the output from Test tab of Message Mapping???
Did You use the Node function in mapping???
if not
You better use either Java mapping
with regards
Gabriel

Client Java Proxy - ?xml version="1.0" encoding="UTF-8" tag missing

Hi All,
I have a Java Proxy to File scenario. I am getting the output in the SAP XI but when i check the XML payload <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> is missing from it. Rest of the document is coming fine.
Any idea how to fix it up?
Thanks and Regards,
Anurag Mahendru.

Here it is:
Re: ABAP Proxy -> XI - > File on a Website
As I know, this is still on discussion, if the Java Proxy generation will be replaced by web service proxy generation.
But existing Java Proxy applications definitivley will run in PI 7.1 as well.
Regards
Stefan

Parse xml cannot handle first line of " ?xml version="1.0" encoding="UTF-16

Hi,
I'm trying to use applescript to parse a few element values from an xml file. It only works if the xml file does NOT have an "<?xml...?>" entry on the first line. The production xml files I use will always have the <?xml...?> entry on the first line. I need to know how to code around it.
Here are two sample files. The first does NOT work, the second DOES work. The only diff is the <?xml...?> line in the first sample.
Sample 1:
<?xml version="1.0" encoding="UTF-16"?>
<alldata>
<valuea>a</valuea>
<valueb>b</valueb>
<valuec>c</valuec>
</alldata>
Sample 2:
<alldata>
<valuea>a</valuea>
<valueb>b</valueb>
<valuec>c</valuec>
</alldata>
Here's my simple script:
set theXML to "path:to:folder:alldata.xml"
tell application "System Events"
tell XML element 1 of contents of XML file theXML -- root element
set value_a to (value of XML element "value_a")
end tell
end tell
The error returned when using the first file format is:
error "System Events got an error: Can’t get XML element \"value_a\" of XML element 1 of contents of XML file \"ath:to:folder:alldata.xml\"." number -1728 from XML element "value_a" of XML element 1 of contents of XML file "path:to:folder:alldata.xml"
Any feedback is appreciated.
NOTE: I am not able to use any third party xml tools for this. This script must use default xml tools, e.g., "System Events". Thanks.

Your first script example works for me. I don't know what you are using to create the data file, but one thing to look at would be to make sure the actual file encoding matches your encoding declaration, and that it is plain text.

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

How to insert ?xml version="1.0" encoding="utf-8"? before an element

Hi, I have a message which must contain XML inside XML, this internal one must start off with the <?xml version="1.0" encoding="utf-8"?> string.
Is there a nice trick for inserting this before an element? (not at the beginning of the mapping, a specific place further inside the XML).
All of the other elements are mapped as part of the message type.

Did you check Message Mapping : Play around with target structure .
You can do this easily with UDF.
public String setPrevalue(String var1,Container container) {
     StructureNode node = ((StructureNode) container.getParameter("STRUCTURE_NODE"));
     node.setPreValue("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
     return"";

PRC: Create Accounting Output shows "xml version="1.0" encoding="UTF-8"

Similar Messages

Maybe you are looking for