PRC - Knowledge Directory - createRemoteDocument - 'Object Not Found'

I can connect to the Knowledge Directory (verified in that I can walk the folder structure etc... )
I can upload files to the document repository (verified in that when I upload the file via PRC I return the new folder and file name and can go to the new physical file, rename it and open it)
But when I try to make a card for that file within the KD, by way of createRemoteDocument(x,y,z) I get the following error:
<pre>
com.plumtree.remote.prc.PortalException: null; nested exception is:
java.rmi.RemoteException: -2147205120 - Error in function PTBaseObjectManager.Open (nObjectID == 214, bLockInitially == false): -2147205120 - Object not found.
at com.plumtree.remote.prc.DocumentWrapper.save(DocumentWrapper.java:84)
</pre>
Thoughts?
Any assistance would be greatly appreciated.
Thanks,
-Mel

Hi mdkelly, Sorry for such a late reply (due to credential issues).
I am using Windows task scheduler to schedule the task. I am given the administrator access to the server (Windows Server 2012). So I think I set to run the script under system account.
My apologies for asking this, am I missing something while scheduling the script through task scheduler? how to check if the scheduled task is running under who's credentials? How to pass my (admin) credentials, so that the script execution won't face
a problem? Any suggestion on the above questions will be helpful. (I tried to search on net for the questions but didn't get any conclusive answers)
Thanks in advance.

Similar Messages

Exchange 2003 to 2010 Migration Mailbox Migration "Object not found"

I am introducing an Exchange 2010 Server to a single server Exchange 2003 organization. I have HT, CAS and MB roles installed already on 2010 w/ SP1. Prepped the Schema, AD, Domain and LegacyExchangePermissions by using the setup.com of the SP1
installation files.
Right now, when I try to initiate a New Local Move Request on 2010 EMC for a mailbox on Exchange 2003, I get an error for all the users saying "Object not found" with a white X in a red circle. I'm not sure what to do at this point to get Exchange 2010
recognize the 2003 mailboxes. Any ideas?
Thank you,
-S

Tim,
Here is what I'm getting from ExBPA:
Error Offline address book replica not found Organization CGU Didn't find a replica of folder 'OAB Version 4' for offline address book 'Default Offline Address List'. Either a replica doesn't exist, or this folder hasn't been created yet. If an OAB generation
attempt has not yet been made, you can ignore this error.
Error Couldn't find any writeable domain controllers Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) There were no writeable domain controllers found in Active Directory site 'Default-First-Site-Name'. At least one writeable domain controller
is required for Exchange to function properly.
Error Database backup critical Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) Database 'Public Folder Database' on server EXCH-2010 has never had a full online backup.
====
And this is what happens if I put go ahead with the move request
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
Test User
Failed
Error:
Mailbox database "EXCH-01\First Storage Group\Mailbox Store (EXCH-01)" doesn't exist.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.Ex23B42B
Exchange Management Shell command attempted:
'cgucpa.com/Users/Test User' | New-MoveRequest -TargetDatabase 'Mailbox Database'
Elapsed Time: 00:00:00
Thank you for your help,
-S

ODI not able to detect primary/foreign keys from XML- user lacks privilege or object not found

Hi Guys,
Im trying to load an xml file with two entities address and employee as below. The topology reverse engineering everything works fine. Im even able to view the xml data in ODI, but when i try to load the data from these two entities joining by the schema primary keys and foreign keys which odi created on reverse engineering process for xml, im getting the below error. Im able to load data from one entity, error only occurs when i use the join odi creates internally to identify the xml components employee and address
XML File:
<?xml version="1.0" encoding="UTF-8" ?>
<EMP>
<Empsch>
<Employee>
<EmployeeID>12345</EmployeeID>
<Initials>t</Initials>
<LastName>john</LastName>
<FirstName>doe</FirstName>
</Employee>
<Address>
<WorkPhone>12345</WorkPhone>
<WorkAddress>Test 234</WorkAddress>
</Address>
</Empsch>
</EMP>
Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml&s=Empsch&re=EMP&dod=true&nobu=false
Error Message:
-5501 : 42501 : java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
    at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
    at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
    at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)
    at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
    at $Proxy2.prepareStatement(Unknown Source)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
    at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)
Caused by: org.hsqldb.HsqlException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.error.Error.error(Unknown Source)
    at org.hsqldb.ExpressionColumn.checkColumnsResolved(Unknown Source)
    at org.hsqldb.QueryExpression.resolve(Unknown Source)
    at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
    at org.hsqldb.ParserCommand.compilePart(Unknown Source)
    at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
    at org.hsqldb.Session.compileStatement(Unknown Source)
    at org.hsqldb.StatementManager.compile(Unknown Source)
    at org.hsqldb.Session.execute(Unknown Source)
    ... 27 more
Please advice
Thanks
Revanth

Thats obvious from the xml file contents you have given here. In this xml file You have four complex type. Two of them are employee and address. However the employee doesnot have any relation with address as you have not added the relationship. Thats why its failing. Its not the fault of ODI.
Also I would suggest not to use auto generated dtd by ODI as you might face problem in future. For example the address type of XML has 8 attributes and 4 of them are not mandatory. That means each of your xml file may have attributes between 4 to 8. This is where ODI auto generated DTD fails.
XML Schema complexType Element
Thanks
Bhabani

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

While posting T.code VL02N "co object not found " what have to do

Hi
Friends..
while posting T.code VL02N "co object not found " what have to do
General Ledger related to Co object what i want todo.
showing error " Co Object not found"
Thank you.
Ashok kumar

Hi
Assign a cost centre to the cost element of the general ledger account specified.
Transaction KA02
another option is got OKB9 and assign cost center to GL account at company code level.
regards
Srinivas

Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found

hi,
While running a page using jdeveloper am getting error like
Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found.
am very thankful to the response
Thanks
Surya

Hi,
I faced the same issue.
I fixed it by searching the missing file (In my case MyEO.xml which is a removed file) using JDeveloper (Menu Search/Search Files...).
It found an occurence in the related .jpr file.
In the .jpr, I deleted the related lines:
<Item>
<Key class="java.net.URL" path="xx/oracle/apps/.../MyEO.xml"/>
<Value idref="15"/>
</Item>
That's it.
Regards,
Olivier

Object not found in store error when trying to load MimeContent of an email (containing attachments)

This is a weird one and I'm hoping someone can reproduce this and give me some help.
We have a system that uses the EWS Managed API to send emails. Optionally an email may need to be saved out as an rfc822 (.eml) file afterwards for storing in our own database. In order to save to a file I need to load up the MimeContent of the message.
And this is where an "Object not found in store" exception can get thrown.
The really strange part is that the exception only seems to occur if the email contains an attachment and if there is too much of a delay between sending the email and trying to access the MimeContent!
My test code is something like:
// Set up the basics
_item = new EmailMessage(P7ExchangeService.Service);
_item.Subject ="Hello world";
_item.ToRecipients.Add("some name", "[email protected]");
_item.Body = new MessageBody(BodyType.HTML, @"<html><head></head><body>hello world<image src=""cid:blah""/></body></html>");
// Add attachment
FileAttachment att = _item.Attachments.AddFileAttachment("blah", "c:\temp\blah.jpg");
att.IsInline = true;
att.ContentId = "blah";
// Send and save
_item.SendAndSaveCopy();
// Wait a bit (see comments below)
Thread.Sleep(5000);
// Now try and save out
var propCollection = _item.GetLoadedPropertyDefinitions();
propCollection.Add(ItemSchema.MimeContent);
_item.Load(new PropertySet(propCollection)); // EXCEPTION!
// ... etc
On some systems it seems that the sending can take a while, hence my Thread.Sleep() call to simulate this.
Its when I try and load up the MimeContent that I will then get the exception. But ONLY if I sleep (simulating the occasional delay seen on customer sites) and ONLY if the email contains an attachment.
The mimecontent is necessary in order to save out to a file (by accessing the _item.MimeContetn property).
Can someone please explain the exception and/or provide a better way of doing this??

This is normal EWS doesn't return the Id of the Item in the SentItems Folder so you need to use a workaround like
http://blogs.msdn.com/b/exchangedev/archive/2010/02/25/determining-the-id-of-a-sent-message-by-using-extended-properties-with-the-ews-managed-api.aspx .
If you want to understand the issue you can enable tracing and look at responses, the actually Id your trying to load the MimeContent from is probably the Id of the draft message. Eg to send a message via EWS with attachments multiple operations must be
used to construct it and when the messages finally gets sent the copy in the drafts folder is deleted and a copy is created in the SentItems folder. However the Id isn't returned for the SentItems copy hence you need the workaround.
Cheers
Glen

PI 7.0 JMS Rcv Adapter: Object not found in lookup of XIJMSService

Hi all,
When sending messages to an JMS queue, JNDI setup, in the Message Monitoring we get the error:
"MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of XIJMSService.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of XIJMSService."
The Error points to the Module Processor. Indeed the 2 default Modules are used:
- SAP XI JMS Adapter/ConvertMessageToBinary
- SAP XI JMS Adapter/SendBinarytoXIJMSService
This second Module contains 'XIJMSService', and according the documentation (http://help.sap.com/saphelp_nw04/Helpdata/EN/4d/a3bc97ff55c742af7faed661635baf/content.htm)
, it uses a parameter named 'modulePoolAdminLookupName' with the default value: /XIJMSService.
This is how far we get. Even when we assign a different value to the parameter 'modulePoolAdminLookupName' , the error in the Message Monitoring stays the same.
Has anyone experience with this issue, or any ideas to investigate or solve this?
Thanx in advance, Walter.

Hi all,
Issue is solved. Apparently the Java-version on our XI-server (1.4.2) could not handle the Vendor's JMS-driver we installed (ActiveMQ 4.1.2.jar) so we tried using the ActiveMQ 4.1.0.jar as the JMS-driver. Now it is OK and message are put on the destination queue.
Walter.

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

XI--- OpenJMS error Object not found in lookup of XIJMSService

Hi all,
I am trying XI-->OpenJms (Server).
I have included openJms.jar library in aii_af_jmsproviderlib.sda and deployed using SDM.
In JMS receiver adapter I am using the following Configuration:
Transport protocol: JMS Provider with JNDI .
Queue connection factory : org.exolab.jms.client.JmsConnectionFactory
JNDI-Name JMSQueue: org.exolab.jms.client.JmsQueue
Context Factory : org.exolab.jms.jndi.InitialContextFactory
JNDI-Server adress :tcp://10.1.102.5:3035
In RWB i am getting the following for this scenario:
Error Exception caught by adapter framework: Object not found in lookup of XIJMSService.
Kindly help what other configurations are required.
Best Regards,
Lemine

Hi Sebastian,
I have still the same problem.
could you send me a screen shot with your configuration?
(openjms configuration).
my email: [email protected]
I have the following standard configuration in my modul:
Verarbeitungssequenz:
Modulname: Type:
ocalejbs/SAP XI JMS Adapter/ConvertMessageToBinary L
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService L
could that cause for that prblem ?
Thanks for helpful answer.
best regars.
Lemine.

XI error: Object not found in lookup of RfcAFBean

Hi Forum,
In a scenario, I have a BPM, which makes a synchronous call to R/3 for execution of a rfc enabled Function module, while doing so, it gives an error as a response, which i can see in the MONI:
<b>com.sap.aii.af.ra.ms.api.DeliveryException: Object not found in lookup of RfcAFBean</b>
what can be the reason for the error? and how can it be avoided?
pls help

it might be a cache problem, run the CPA cache and check.
ir, id cache the data here also.

WebDynpro app stopped working (Object not found in lookup of JPA_DEFAULT)

Hi,
my scenario is as as described in my posting (java.lang.IllegalArgumentException: model object must not be null). after i got everything up and working it suddenly stopped.
the wedynpro project is implicitly stopped, beacuse earecipe could not start, reason:
[code]
Error occurred on server 15129750 during startApp demo.sap.com/earecipe : com.sap.engine.services.orpersistence.container.deploy.ActionException: Clusterwide exception: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of JPA_DEFAULT.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:582)
at... [see details]
Error occurred on server 15129750 during startApp demo.sap.com/earecipe : com.sap.engine.services.orpersistence.container.deploy.ActionException: Clusterwide exception: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of JPA_DEFAULT.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:582)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:343)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:637)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initDataSources(ComplexModuleCreator.java:277)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initRuntimeModels(ComplexModuleCreator.java:246)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.createModule(ComplexModuleCreator.java:151)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.execute(ComplexModuleCreator.java:81)
at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexActionAdapter.execute(ComplexActionAdapter.java:34)
at com.sap.engine.services.orpersistence.container.deploy.impl.ApplicationCreator.execute(ApplicationCreator.java:74)
at com.sap.engine.services.orpersistence.container.deploy.impl.PersistenceContainer.prepareStart(PersistenceContainer.java:187)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:211)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:393)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:480)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:537)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:149)
at com.sap.engine.services.deploy.server.application.ParallelAdapter$2.run(ParallelAdapter.java:350)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:130)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:226)
[/code]
whats that supposed to mean, i'm not using any JPA functionality at the moment.
regards,
christian

Hi,
you have to define a datasource alias for your db (in "Application Resources" in SAP Netweaver Administrator) or use an existing one and add it as a "jta-data-source" child for your corresponding persistence unit within your persistence.xml
regards,
christian

JMS Destination object not found

Hi everyone,
I have a weird problem with SunONE Message Queue 3.
I have a queue and a connection factory defined (using the SunONE Application Server 7 Admin Console) as well as a physical resource.
I can verify their existance using asadmin....
asadmin>list-jmsdest -u admin server1
queue_1 queue {}
asadmin>list-jms-resources -u admin server1
jms/newqueue_1
jms/newQCF_1
When I attempt to deploy a message driven EJB I get the following error
SEVERE ( 1484): javax.naming.InvalidNameException: JMS Destination object not found:`jms/newqueue_1`
This question has already been asked on the App Server board here http://swforum.sun.com/jive/thread.jspa?threadID=15517&tstart=0 (that post is nine months old btw).
I am posting this here in the hope that someone more familiar with MQ3 may have an idea of how to help us.
Thanks in advance.

I have now solved this problem. External JNDI resources are required in the AppServer.
They can be created with the following commands:
asadmin>create-jndi-resource jndilookupname jms/newQCF_1 resourcetype javax.jms.QueueConnectionFactory factoryclass com.sun.jndi.fscontext.RefFSContextFactory enabled=true --property java.naming.provider.url=file\:///c\:/java/mqjndi:java.naming.security.authentication=none newQCF_1
asadmin>create-jndi-resource jndilookupname jms/queue_1 resourcetype javax.jms.Queue factoryclass com.sun.jndi.fscontext.RefFSContextFactory enabled=true --property java.naming.provider.url=file\:///c\:/java/mqjndi newqueue_1
Both these commands assume that the file system context is being used however the LDAP commands are similar (just more properties).
This step, which seems vital, is missing from the AppServer documentation (in fact it specifically states that this step is not necessary). The irony is that I found the answer in the IBM MQ documentation!

PRC - Knowledge Directory - createRemoteDocument - 'Object Not Found'

Similar Messages

Maybe you are looking for