Prcoess chain failrure at AND process step

Hello,
I have a global process chain wherein we are loading data from two infopackages and that is then followed by an AND event for further data activation steps.
This chain has been working fine for months. All of a sudden, for the past three nights in a row, the AND event has been throwing an error as soon as the first of the initial local chains completes. The error is 'This AND process is not waiting for event RSPROCESS, parameter...,' and then it goes on to give the parameter associated with the predecessor chain that has completed. The AND event turns red and does not trigger the subsequent processes when all of the predecessor chains complete. Also, the repeat option does not work. The subsequent processes have to be kicked off manually.
Any suggestions for how to correct this problem?
Thanks!

Hi,
I know problem is solved by new creation.
But check these notes:
Correction: Error in AND process after restart
SAP Note Number: [1083103|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler]
SAP Note [850668|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=850668] Correction: No multiple triggers after RSPROCESS event
Regards
Andreas

Similar Messages

  • Process chain failed at  AND process type ?

    hi all .
    Process chain failed at  AND process type ?
    and it is giving  message      Job cancelled after system exception ERROR_MESSAGE     .
    what is the reason & solution .
    regards ,
    srinivas ,

    Hi,
    That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
    Regards
    Sajid khan

  • Process Chain hangs on AND process

    Help Super gurus!
    I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
    The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
    Why does it hang there and what can I do to get it to continue?
    Thanks,
    Al
    Points available.

    Hi,
    Not sure what is the root cause in your case.
    Try this. It may work. Normally this is done after a step turns red and no repeat is available.
    Method 1 (when it fails in a step/request)
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    How is it possible to restart a process chain at a failed step/request?
    Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
    You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
    Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
    Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
    Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
    Thanks,
    JituK

  • Process chain Error: This AND process is not waiting for event RSPROCESS

    Hi All,
    I am facing an error in the process chain in PRD.
    Error message: This AND process is not waiting for event RSPROCESS.
    We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
    Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
    It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
    And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
    Thanks in advance,
    Sai Chand.S

    Hi,
    If you did any transports related to that metachain we face similar kind of issues.
    not only the AND process , we need to remove all the process before executing the AND process and create it again.
    It helps you, you said your in production So you should take the proper approvals and do it.
    Regards,
    Yerrabelli.

  • Abap to mass create business scenarios, business process, and process steps

    HI,
    Really struggling to figure out how to mass create "folders" in the business blue print structure.      Periodically we will need to add in a new business scenario with everythign associated with it.  the business has already written up all the information in excel sheets and we would like to avoid having to manually enter this data every time..   These scenarios and process etc are project specifc.
    Has anyone done this before? I have been playing with SOLAR_STRUCTURE_CREATE and while i can see the lines being added into table, i can't get anything to appear after wards in SOLAR01.
    Any and all help greatly appreciated
    Sara

    Hello.
    I was searching how to use the program RS_SOLAR_IMPORT_STRUCTURE for mass create business scenarios in Solar01.
    I saw you was in the forums about this. Do you got to do?
    Can give me this development?
    Thank you for your help.

  • Error in Project Progress Config and process steps

    Hi experts,
    I am implementing PS for Asset procurement, in this i will procure material against material component which is added in Internal activity. I am using scheduling also. Now My client requirement is that he want project progress report on cost basic.
    I am using CJ40, CJ30 and CJ32.
    IN IMG i have configured like given below
    1. I have created Progress version 100
        EV base - Cost Plan ( active Proejct, Annual Value)
        POC weighting - Weight
        Planning type - Basic dates
        Early/Late - Earliest Possible
        Actual method and Ref plan method tick.
    2. Measurement method -
       for cost based report i have selected - Cost proportional
    3. Default value for measuremnt method -
        100 -WBS element - Plan - Cost proportional
        100 - WBS element - Actual - Cost proportional
        100 - Acitvity ( int)- Actual - Cost proportional 
        100 - Acitvity ( int)- Actual - Cost proportional 
    I have put this in CJ20N. I followed following steps
    1. CNE1
    2. CNE5
    but it is showing 0 value in all tabs such as Aggregate planned percentage of completion, Non-aggregated planned percentage of completion
    can anyone tell me the total process to get this report perfectly. It is very urgent need so please help me guys.
    Thanks,

    Hi,
    1) in wbs goto progress tab for enter version plan ,give ur method and actual also give your method  poc weightage give 1
    2) in activity go to progress tab enter your version, give your method for plan and actual give the work measurement method and weightage give 1
    3) now confirm the activities if partial confirmation enter the degree of processing (%).
    4) goto progress calculation screen and give your project number and select with hierachy and with orders. enter the month and year.
    5) excute,
    6) goto the report and check the report.
    if still not working send screen shot of the report.
    Thanking you
    Vengaiah Chowdary

  • "Returns" indicator in PO and processing steps

    Hi,
    Can somone please explain or show me where I can find documentation that will show all the steps from creating a PO with the return indicator ticked to finally creating the credit memo. The parts in between, creating deliveries etc are not as clear, any help would be appreciated.
    Thanks

    use this link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/69/1b8550950111d2ac740000e829fbfe/frameset.htm
    to create p.o go to me21 /me 21n after the plant /storage location/there will be R tick the box
    G.Ganesh Kumar

  • Problem with AND processer in process chains

    Hi friends,
    In BI 7.0, when creating a process chain by linking 2 DTPs with AND processor,
    two AND processor are showing.
    Can anyone please suggest how to get only one AND processor after combining also.
    babu

    Hi Babu,
    You can remove one AND process step from the design.
    (Right click on the process step and Remove Process)
    Connect two DTPs with the remaining AND process step, Save and Activate.
    This will solve your problem.
    Regards,
    Sreedhar

  • Self Check and Your self check printing process steps and program in SAP

    Hi  SAP-FICO's
    My client required  in SAP-ECC-6.0
    1.Self Check printing for cash withdrawel 
    2. your self check for one Vendor or group of vendors  for getting DD from the Bank
    3.How to issue  the  same check for more than one vendor   and get debited through F-53 bank payment
    Can any one give idea and process steps  to  resolve the above three issues .
    Thanks in advance.
    Thanks &regards
    maalik

    Hi
    Can any one can provide the process steps.

  • Finding process steps from BPR - some process steps missing SAP tcodes

    In Solution Manager 4.0, we are currently focusing on the documentation part and our teams have defined their respective hierarchies, scenarios, processes, and process steps.
    When looking at our process steps, we are trying to download it from the BPR but it seems such an uphill battle to find the right process step in there and if you think you have it there are no transactions behind it.
    My questions are:
    1. Is there any way I can find a process in the BPR by transaction code so it will show processes by transaction code?
    2. Any tips of finding the right process in the BPR?
    3. If we are to manually add the process steps and the transactions by process step, what do we lose? In the structure tab of the business process, the source and original name will not be populated but looking at the transaction tab of the process step, after manually added, it looks fine. Will this at all influence getting the customization (configuration) items in SolMan?

    Dear all,
        The best way to find the process step in sol Man BPR is:
    Let us consider one scenario:
    You want to find business process step "Run MRP" from BPR. If you want to execute this process step, the relevant t.code is MD01. ( Let us assume You know this t.code already by memory).
    Now enter this t.code in Sol Man, at business process step level. If you enter this t.code, automatically, the system will give you the "Description of the t.code (as a text)".  This text is automatically fetched from BPR content. Copy this text & search in BPR.
    Now , the system will properly highlight the t.code (MD01) from BPR. Now select the process from BPR.
    Regards
    Senthil

  • Process chain AND process

    Hi,
    I have a process chain that has two parallel processes of loading DSO and Infocube data. There are two infopackages on one side and two on the other side. The two processes are connected with and AND process at the end and after that there is a datastore activation process.
    When I executed the process chain, the infopackages on both sides started loading data. The two infopackages on the left side finished first while the second infopackage on the right side had not finished yet when the AND process errored. I get the following message:
    This AND process is not waiting for event RSPROCESS , parameter
    47VKUORHMXQKR2AN73AVAR0C9
    After the AND process I have a Datastore generation process and I want it to continue only when all infopackages have been loaded.
    Why does the process stop at AND even though all infopackages have not finished yet?
    thanks
    Michalis

    There was no error message in ST22 or SM37. There was very little info to go on. I just deleted the requests and run the process chain again and there's no error. However the process chain does fail at a later step.
    Update Datastore Object Data (Further update)
    I don't know what that further update is for. It was automatically selected in my Process chain when I selected the infopackage for the DSO.
    There's a MESSAGE_TYPE_X error.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLRSM2" - in "RSSM_MON_WRITE_3".
        The main program was "RSBATCH1 ".
        In the source code you have the termination point in line 2659
        of the (Include) program "LRSM2U16".
        The program "SAPLRSM2" was started as a background job.
        Job Name....... "BI_PROCESS_ODSPROCESS"
        Job Initiator.. "CSPAPADM"
        Job Number..... 14103000
    Source Code Extract
    Line  SourceCde
    2629       CALL FUNCTION 'RSSM_GET_TIME'
    2630         EXPORTING
    2631           i_datum_utc  = rsreqdone-tdatum
    2632           i_uzeit_utc  = rsreqdone-tuzeit
    2633         IMPORTING
    2634           e_timestamps = l_s_status-t_timestamp.
    2635       IF rsreqdone-tstatus(3) = icon_green_light(3) OR
    2636          rsreqdone-tstatus(3) = icon_red_light(3).
    2637         CALL FUNCTION 'RSSM_GET_TIME'
    2638           IMPORTING
    2639             e_timestamps = l_s_status-ts_proc_ended.
    2640         l_not_yellow = 'X'.
    2641       ENDIF.
    2642       IF l_not_yellow = 'X'.
    2643         CALL FUNCTION 'RSSTATMAN_SET_STATUS'
    2644           EXPORTING
    2645             i_s_status    = l_s_status
    2646             i_with_commit = 'X'.
    2647         IF l_s_status-t_status(3) = icon_green_light(3) AND
    2648            l_s_status-dta_type   = 'ODSO' AND
    2649            t_data-aufrufer <= '70'.
    2650           CALL FUNCTION 'RSS2_CALLBACK_ODSADM_ODS_SUCC'
    2651             EXPORTING
    2652               i_ods = l_s_status-dta(30)
    2653               i_rnr = l_s_status-rnr.
    2654         ENDIF.
    2655       ENDIF.
    2656     ENDLOOP.
    2657     IF sy-subrc <> 0.
    2658       IF t_data-aufrufer <> '09'.
    2660       ENDIF.
    2661     ELSE.
    2662       IF l_not_yellow = 'X'.
    2663         CALL FUNCTION 'RSB1_OSNAME_TO_ICNAME'
    2664           EXPORTING
    2665             i_osource        = g_s_minfo-oltpsource
    2666 *           I_OSTYPE         = RSAOT_C_OSTYPE-TRAN
    2667           IMPORTING
    2668             e_icname         = l_icname
    2669           EXCEPTIONS
    2670             name_error       = 1
    2671             OTHERS           = 2.
    2672         IF sy-subrc = 0.
    2673           CALL FUNCTION 'RSAWB_MAINTAIN_DTA'
    2674             EXPORTING
    2675               i_method                   = rsatr_c_dta_get
    2676 *             I_TYPE                     =
    2677               i_objvers                  = rs_c_objvers-active
    2678               i_dta                      = l_icname
    Any idea what that means? Also do I need that further update step in my process chain?

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • No repeat option available for the process step in process chain

    If the process chain failed at the ODS activation level, generally the repeat option will be available for activation and to continue the next step. But in some cases the repeat option will not be available for the process step.
    Is there any process to get the repeat option in the process chain?

    You can change this in RSPC > Settings > Maintain process types > Loading (or process of your interest) > put the check mark for Repeatable.

  • How to know the process chain start time and end time

    Hi Experts,
                   How to know the process chain start time  and end time .
    Thanks in advance
    Regards
    Gutti
    Edited by: guttireddy on Feb 23, 2012 11:30 PM

    Hi Reddy,
    You may find the run time of a PC using below steps.
    1. Call SE38 > /SSA/BWT > Execute  > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
    2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
    Hope this helps.
    Regards
    Sai

  • Authorizations and Process Chains

    Hi All,
    Can any one help me in learning Authorizations and Process Chains. Could you please send me some real time documents on the following.
    1. How would we get the requirements from the client to create Authorizations? What info will they give us basically to create them?
    2. The same with Process Chains.
    Could someone plese send me the requirements documents(on authorizations and process chains) they get from the client to know it from a real time perspective.
    My email ID: <b>[email protected]</b>
    Many thanx in Advance...
    Best Regards,
    Nimma.

    Hi A.M.S,
    Thanx for ur reply.
    However, I am looking for some real time specifications which we get from client just to know how the requirements will come to us and then the steps to be followed and so on...
    I would be grateful if you could send me some of them.
    Best Regards,
    Nimma.

Maybe you are looking for