PRD is not triggering in Negative Stocks allowed scenario

I am trying to do Subcontracting process with Negative Stocks allowed for the final material and raw materials even & all of them are checked for negative stocks allowed. When I am trying to issue, say 10 units of materials to SC Vendor with ZERO stocks in storage, the stock's updating accordingly as 10-, but while doing MIGO for say 5 units, the stock's updating accordingly, but in FI documents so created, the PRD key is missing. I read bout PRD and it states : Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account. Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system. So, what steps are to be taken in order to trigger PRD key in the FI Documents.
Regards,
Sowmyesh Maniyar

Sowmyesh Maniyar wrote:
I read bout PRD and it states : Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity.
Yes its correct.. At the time MIRO, if any price difference occurs, then first system checks stock is available or not.. If stock is there then system will take the amount from stock account, if not, then system take the amount in PRD account...
But here you have activated negative stock. I think because of this your stock account triggered instead of PRD account..
Can you check and analysis the accounting entry, where the price different amount goes ?

Similar Messages

  • Negative stock allowed for a material with SDG assigned

    Hi All ,
    I have raw material for which stock determination group assigned in MRP 2 view for issuing the componets .
    I also marked allow negative stock in plant/storage location view .
    Normally if the stock determination group is not assigned and if the negative stock allowed in plant/storagelocation is checked then during backflush though the required qunatity is not availabe then the stock will be marked in negative quantities , so that when GR happens for this material will overcome the negative quantity .
    But since stock determination group is assigned , though the  negative stock allowed is checked the backlogs are created in MF47 rather making the stock of the material negative [ I assume this behaviour is because the SDG is determined dynamically ]
    Is there any setting required to not sit these backlogs in MF47 when the negative stock allowed in plant/storagelocation is checked
    Thanks
    Sireesha

    Hello Sireesha,
    Even I have similar issue, can you please let me know if this is fixed for and how did it work.
    Thanks
    Chandra

  • Negative stock allow

    Hi,
    I have to test for --Plant/Storage location allow negative stock.
    It means I have to use MIGO_GI for plant/storage location combination and can use material which is having no stock/ negative stock.
    Regards
    Ashu

    Hi Thanks,
    Hv made the setting,
    Now whthere can I check in same manner( as mentioned above  goods issue for material having no stock).
    Regards
    Ashu

  • TRansfer Order - Negative stock figures

    Dear Friends:
    Using T.code LT03, I entered Warehouse no,plant,delivery and pressed enter
    In storage, I selected 003(open storage) and selected post
    In movement data, I entered the data
    source storage type: 003 (open storage)
    source storage section - 001 (Total section)
    storage bin - 16-03-69 and pressed enter
    I get the error ' Storage type 003 does not allow negative stock figures'.
    How to overcome the error?Please advise.
    Thanks&Regards
    MSReddy

    You need to activate negative posting allowed indicator at two levels:
    1. In the material master, in Plant data / stor 2 you have to tick the indicator Negative stocks allowed in plant
    2. In TCode OMJ1 allows negative stock allowed for each plant / storage location.
    Regards,
    Suraj

  • Negative Stock config.

    Where do I set the Negative stock allowed for a storage location?
    I have maintained the negative stock indicator on the material master.
    Kind regards,

    Hi ,
    In Customizing u can set up negative stock indicator
    under Inventory-mgmt &physical inventory> Goods issue/transfer posting> Allow negative stocks. U can set negative stocks at valuation area level or storage location level. In material master u can set them in General plant data/Storage2 data view.
    Hope this helps.
    Regards,
    R.Brahmankar

  • Negative stock value

    Hi All,
    I am executing a stock aging report for a particular plant and for that plant I am getting negative stock values i.e. value of KF 0VALSTCKVAL is negative. I checked the values in MB5B and MC.9 for that plant and it is positive there. There are around 42000 materials in that plant so it is impossible to check value for each and every material.
    I also checked OMJ1 transaction and found that "negative stock allowed" is ticked for the plant for which I am running the report. Does this impact the value of 0VALSTCKVAL keyfigure?
    Kindly help me to get this issue resolved as I am new to inventory management.

    Patel,
    Check at MC.A by providing Month range(eg: From Jan 2000 to Apr 2009).
    If value matching with MB51, then what is the issue...??
    Also Check cureent total & valuate stock and Value for current month for same material.
    I think you are displaying values in aging query based on receipts and issues based on posting date...!!
    Showing some negative figures, i think.
    Srini

  • Allow negative stocks only if i have open purchase order

    Good Morning Gurus
    How to to the customization for the scenario like
    open purchase must for allowing negative stocks in my plant.
    with out open po negative stocks should not allow.
    can we config for this ????????????
    Thanks & Regards,
    Naresh

    Hi,
    Why business go for negative posting, when purchase orders are open and if purchase orders are open, business can go for goods receipt as and when goods are delivered!
    For special purpose, business go for negative stock posting with settings  in OBY6 t.code  for selection of check box  'negative stock permitted' in processing parameters for your company code and with setting in OMJ1 t.code for selection of check box  'negative stock' for your valuation area(plant).
    Regards,
    Biju K

  • Implications that we could have if we allow Negative Stock in SAP

    Hi Gurus.
    Can I have in details the Implications that we could have if we allow Negative Stock in SAP please ?
    Thanks
    Nainar

    Hi Nainar,
    Implications in the sense, if you try to issue more stock than the existing. System pop up an error message that insufficient stock.
    If you activate the Negitive stock then the system allows you to issue the stock.
    Ex : Suppose ur company has power cut and u use generator at the time of power cuts.Now that u use diesel for generator, if suppose u have stock physically avaliable in ur plant and u didnt enter the GR(not avaliable in system). At this point u have to issue the diesel to run generator, hence system will show you negitive stock(-ve quantity) the amount u have issued. Later when u enter GR, it will tally issed quantity.
    To activate Negitive stock at plant level, follow the path
    SPRO>MM>Inventory Management and Physical Inventory>GI/Transfer Postings->Allow negative stock.
    BR,
    Krishna

  • Allow negative stock on storage location

    Dear all,
    When we allow negative stock on a storage location. At posting time we have an error "deficit stock of batch assignment". Anybody got a clue of what has to be done to correct this ???
    Cheers,
    Olivier

    Dear Oliver,
    Please do the following checks.
    Prerequisites
    To work with negative stocks, you have to:
    · explicitly allow this in the Customizing system for each valuation area and storage location
    · set the indicator Neg. stocks in plant in the material master record of the individual materials (storage data)
    Negative stocks are allowed for special stocks if you have activated negative stocks in the valuation area and for the special stock concerned in the plant. You do not need to activate negative stocks in each material master record.
    Procedure
    You can define whether you want to allow negative stock by making the relevant settings for each storage type in Customizing.
    To do this, choose Logistics Execution -- Warehouse Management--- Interfaces -- Inventory Management -
    Allow Negative Stocks in Interim Storage Types --- Allow negative stock for each storage type in the Implementation Guide (IMG).
    When the allow negative stock indicator is set, the system lets you post negative quants to the corresponding storage type.
    Additionally, you can define whether you want the system to issue an error message (E) or a warning message (W) or no message (blank) when posting negative stock. You can make the relevant setting in the activity Control of System Messages in Warehouse Management. You can determine the notification type using the parameter MSV in the user master record.
    To do this, choose System --- User profile --- Own data.
    Then select the tab page Parameters.
    Enter MSV in the Parameters field and enter the value with which you want to group certain users in the value field (for example 01).
    Choose Logistics Execution ® Warehouse Management ® Interfaces ® Inventory Management ® Allow Negative Stocks in Interim Storage Types ® Control of System Messages in Warehouse Management in the Implementation Guide (IMG).
    Create a new entry with the version number (Value) you have chosen and enter the desired system reaction in the Message Category field (E, W, or blank).
    Regards
    Mangal

  • Why 'Allow Negative Stock' doesnt go with put away strategy L

    Just a quick question
    Why Putaway Strategy L doesnt go with 'Allow Negative Stock'

    Hi,
    If you enter the putaway strategy L- system will finds the next empty bin where there is no quantiy or no quant.
    If you assign "allow negative stock indicator", if stock is not there (ex for goods issue / delivery) system will generate a negative stock with a negative quant.
    But while placing the new stock system will them neglect the bins with negative quantity (considering as quants), it will place it in the next empty bin.
    It contradicts the logicof negative stock check, so standard will not allow negative stock indicator for putway strategy L.
    thanks,
    JK

  • Allow Negative Stock in Quality Inspection

    Hi All,
    I have a general question regarding Negative Stock.
    Is it possible by any means to allow -ve stock in Quality Inspection. If yes then what are the customizing settings that are needed.
    Any valuable inputs will be really appreciated!!
    Thanks In Advance!!
    S

    hi
    firstly how can we have negative stock in Quallity
    stock updates in quality from PURCHASE or PROduction so we cant have -ve stock in quality
    negative stock will be there only up on consumtion
    now u can have negative stock in GOODS ISSUE ,as on emergency if u dont have mateial and u have to issue some material to production then u have to have -stock open
    now for this go to material master plant data 2 view and here u can ticl for allow negative stock
    regards
    kunal

  • Why negative stock is possible for Moving avg price & not standard price?

    why negative stock is possible for Moving avg price & not standard price?

    Hi,
    Negative stock is available for both MAP as well as Std. price.
    Eg.
    MAP-->
    1. Mtl with MAP 1 Rs/pc & stock of 10qty.
    2. GI done for 15 pcs. Each pcs evaluated with 1Rs (MAP). Stock value reduce by 15Rs. Offsetting entry takes place in consumption account of 15Rs. The stock and stock value is -5 each.
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Negative stock (which issued) with 1Rs. But incoming mtl. is of 3Rs/pc. So difference of 2Rs for Qty 5 (Neg. stk) of 10Rs. will posted to Price Difference account. And remaining 20Rs posted to stock account.
    Std. price.--> step 1,2 remain same
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Durin GR Stock account posting will be 10Rs but due to negative stk value the net stock value will be 5 Rs. Remaining 20Rs posted to price difference acct.
    Regards,
    Sandeep

  • Items with  zero stock quantity show negative stock value in Stock reports

    When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value  (negative value in my case)
    How can this happen, and how can I correct this situation ?
    System parameters are :   negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
    P.K.Johnsen

    Hi Johnsen,
    I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
    Thanks,
    Joseph

  • Negative Stock in MB5B

    Hii,
    When i execute the mb5b for stock on posting date system is showing the negative stock.
    For Eg:
    Stock of one material is showing me as -50 No's as on Posting date 10.02.2008
    In MB51
    GR 101 for 100 No's on 29.02.2008 with Entry date: 29.02.2008
    GI 201 for 50 No's on 10.02.2008 ( it is showing me as -50 No's but stock was not there at material level on 10.02.2008) with Entry date 01.03.2008
    User has changed the posting date as 10.02.2008, which the entry date is 01.03.2008.
    So, System is not considering the stock when it was received. In case of non batch managed materials why system is behaving like this ??
    Is there any standard feature to control it ??
    Please suggest!
    Kumar

    Hi,
    Whatever example u have given is nothing but a negative stock.
    In SPRO-> Financial accounting> Global settings,there is setting for company code where we can decide whether to allow negative stocks or not by selecting the block.
    In that if we select it, then we can issue the material before receiving it.Ultimately it will show negative stock. And as soon as you receive the material, it will become positive.
    I've tried my best to explain, try this.
    Reward points, if found helpful.
    Regards,
    Piyush

  • Negative  stock in mb5b report

    hi
    I am having zero stock on 13.11.2008. I did MIGO(101) date is 13.11.2008. My system allowing me to issue material on 5.11.2008. So that my stock came in negative in mb5b report not in MMBE. i am not getting any error if i am posting in back date in same period when there was no stock. Can i know which msg nor should i have to activate or any other way to me that user will get error while posting in back date?
    Thank you
    Sameer

    hi
    plz check u might activated OMJ1 - Allowing Negative Stocks.
    http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
    regards
    kunal
    u hhave already created same thread earlier
    https://www.sdn.sap.com/irj/scn/profile?userid=3846363
    https://www.sdn.sap.com/irj/scn/profile?userid=3846363

Maybe you are looking for

  • HT1848 How do you transfer purchases on the new iTunes?

    Please help my old computer crashed and not all of my music was on the cloud. All the help pages show me how to transfer on the old itunes set-up which i already knew but none of it is working on this set-up. I'm lost.

  • Oracle ADF 11G R1 and Internet Explorer 11 Support

    Hello, I need to write my own post even if issue is written on this thread (https://forum.java.sun.com/thread/2602720) Because i suppose that post writer reached to his useful workaround  and no activity seems for a couple of months. Use 11.1.1.6 and

  • Open qauntities in return order

    Hi All, I need to post a goods issue for a return order based on the idoc data. I have to check the open quantities in the order and have to post the goods issue. Can you please tell me how can I know which line item is open and I know I can post the

  • Exchange user information not updating from AD

    I just recently updated Job Titles, Location, and Phone numbers for users in Active directory. For some reason not all of the information is be transferred to Exchange. I noticed this because it isn't updating in the GAL either. I went to Exchange Ma

  • Routing-Sequences Error in co11n

    Dear all, Can any one please share the screen shots how to process the sequences in routing I have tried by using help portal but i dint get any differences on that. While confirming in co11n,that particular sequences also not get displayed in sequen