Pre 9: black video, only sound.

I used to use premiere many years ago, but this newest version is totally different from what i've used in the past, so bear with me.
here's my problem: When editing my video, I can cut and rearange clips pretty easily, everything seems to be working fine, however when i go to render the final product, or apply any sort of effects (i'm trying to keep my edits simple for now, but in the future i'm going to need to be able to green screen, color correct, and other effects) I end up with a black video and only audio. this loss is permanetly part of the project, even if i re-load another save. (edit: never mind this bit, i can re-load just fine) it seems to only occur when i have a lot of clips, since if i just apply filters or render raw footage it seems to work just fine.
my machine, though certainly not top of the line is pretty respectable, Its only a few months old and will play any game with full graphics settings (i'm a gamer so this is my best point of reference, I know video editing can be more taxing) specs:
AMD phenom X4 3.4 ghz
4 gigs of ram
NVIDIA GeForce GTS 450 (with latest drivers, i updated them about 20 minutes ago)
windows 7 64 bit
I don't really know much about video files (there's so many variations!) so here is the properties window:
type of file: Movie Clip (.MPG)
I've tried a few different presets with this file and all of them get the same results. I tried standard dv 48hz, whatever the default was, and the standard 48hz under the hard drive (since it mentioned sony cameras and that's the brand i'm using)
I'm really at a loss of what to do, but i would be happy to provide any further info if you think you could help me.

Thanks for the help guys. I got the project set up correctly, and all seems to be in order. I also think there may have been issues with converting when rendering the final product, but I could be wrong on that.
also thanks for the tip on mpeg and GOP, i have noticed in the past that editing files from this camera can lead to the sound and video getting out of sync. oh and to answer your question, it's just a simple sony point-and-shoot that i was editing for this particular footage, though I also have a flip (and I did see that there are settings for my flip)

Similar Messages

  • Phone wont play any videos. only sound. PLZE HELP ...

    my nokia n95 has stopped playing ALL video files, this including ones the phone has recorded. mp4. every video!
    real player loads up the files playes them but only the sound. the picture is black and the timer dos'nt even count. whats happening here?????

    That's very odd, you could try what android said.
    Can you post the specific video properties of your video.
    If you don't know how to read the video properties check out this post:
    http://portablevideo.blogspot.com/2008/06/video-file-properties.html
    Message Edited by el_loco on 11-Aug-2008 05:30 PM
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Upgrade to 7.6 now no video only sound

    I upgraded to 7.6. Now when I play a music video I hear the audio, but I can't get a picture. All I get is green and purple stripes.
    I have tried upgrading Quicktime, but get the same problem.
    Can anyone help.
    Thanks

    After upgrade to iTunes ver 7.6, only get audio and no video when I try to play a TV show on iTunes. The video is purple and green moving stripes and patterns. The audio sounds ok.
    I am new to iTunes. Should I go back to a previous version of iTunes (e.g. ver 7.5). If so, how would I get the old version of iTunes.
    Since I synced by iPod with ver 7.6, the iPod got the latest software also. Do I need to somehow go back to the old software version on the iPod so there is no compatability problem with the old version of iTunes?
    Help.

  • Black video, no sound

    Hello,
    on a Mac with QuickTime Pro I have a bunch of videos with the following specifications:
    AVI-file, H.264, MPEG3, 25 FPS, 16.7 Million
    This files play nicely on the Mac. On Windows with Quicktime Pro 7.3.1 all I get is a black window
    with no sound. Here QuicktimePro reports "H.264, 720x576, 25 FPS, 16.7 Million". The progress
    indicator moves, the time is counting but the window remains black. Why?
    Regards,
    Christoph Gartmann

    No, I am sorry but not even that helped. The file was even smaller now - 3,1 MB - which is quite small for a HD-video of more than 6 minutes length.
    If I may try to reason here; I would think that somehow the communication between FCP X and the original file is broken or thwarted, thus what appears in the timeline, isn't "recorded" if I may say so. I am just thinking that FCP is based upon non-destructive editing; that is that the original files are not being altered, but what is being done must be recorded, somehow.
    Well, I am not that technically inclined, but hopefully you see what I mean?
    As I mentioned, this has happened once before and I just gave up then and continued to work with other projects without any problem, so that indicates that it is nothing wrong with FCP, either, aside from this odd bug, which I guess it is.

  • SIR MY WEBCAM NOT TAKING PICTURE AND VIDEO ONLY SOUND,,I REINSTALL ITS DRIVER,,

    SIR MY COMPAQ 610 ,,DOES NOT TAKE PICTURE OR VIDEO,,I REINSTALL ITS DRIVER,,ONLY RECEIVE SOUND,

    Can you please update the latest webcam driver from the software and driver download page on www.hp.com and check if this resolves the issue? I would also suggest you to download the latest Cyberlink Youcam from the driver download page.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Cannot see uploaded video, only sound

    When I upload videos off my video camera, they playback a black screen, but i can hear the sound still. How do I get the video's to show?

    Open the file using QuickTime Player and open the Movie Inspector window to tell us more about them.
    My guess is AVI container or older codecs.

  • No video, only sound in Safari embedded YouTube videos

    I've noticed this past week that on both iPad and iPhone, videos from YouTube which previously played straight from Safari (embedded in a blog etc.) suddenly no longer play. That is, on the iPad it tries to play – I get sound but no video; I just see the original web page with a black box where the video should go. On the iPhone it doesn't even get that far. iPad is currently using the 4.3.5 system software. iPhone is a 4 running 4.3.3. Is anybody else having this problem, and any idea of a fix?

    Thanks for the quick reply. I've tried each of those now on both devices and it hasn't made any difference I'm afraid. I've found a work around – clicking the YouTube icon lower right of the video frame opens the video in YouTube in a new tab, and that plays fine, providing I haven't already tried to play it in its embeded location. This is a little problematic as I'm hosting a site with YouTube content, and other people accessing it via an iOS device won't know whether they need to click the icon until after they've tried hitting the play button in the centre...
    The video on the page below is a good example. Embed code is straight out of YouTube, and Syndication is set to on. Android users and iPads with older software versions have had no problems it seems.
    http://www.tokyoebisuren.jp/article/0028102.html

  • Keynote 6.0 shows will not play videos, only sound from clips

    I have upgrader to Mavericks and KN 6.0
    Now when I try to play previous KN presnetations containing video clips, some play fine, others just play with sound + no video, and other play sound + video, but with loud "ehcoes" making them unusable.
    What do I need to do to corret this.
    Thx
    Dave

    As seen here:
    http://support.mozilla.com/en-US/questions/742502#answer-27163
    Disabling hardware acceleration worked for me - be sure to reload the page after doing so, Flash won't adjust for the change on the fly.

  • How can i view .wmv file--Safari 10.7.4 installed Flip4Mac and Quick Time open file, w/o video, only sound?

    I used to be able to view .wmv files before OSX update version 10.7.4.  Right now I get sound only using either Quich Time or Flip4Mac.  Is there a fix for this issue?  What else should I try?  Thanks for any suggestions you may have.

    I used to be able to view .wmv files before OSX update version 10.7.4.  Right now I get sound only using either Quich Time or Flip4Mac.  Is there a fix for this issue?  What else should I try?  Thanks for any suggestions you may have.

  • My iPad is not working on YouTube I don't get video only sound

    My iPad is not working on YouTube I only get sound no video

    That wasn't very helpful.......
    To the OP, are you using the YoutTube App, or are you trying via Safari?

  • Adobe Media Encoder CC outputs black video

    I've been having problems with AME for quite some time, such that I don't even use it except for very short videos.  If I export video in AME, the first half is good, but the second half is black video only.  If I export directly from Premiere Pro, all is well every time.  It's most frustrating to be paying for a product monthly that does not work, so please overlook my frustration.   Has anyone successfully gotten a discount from Adobe for the failure of software to work as advertised?
    Here's another issue I have: there is no way to file a bug for AME as it is not available in the drop down list on Adobe's support site. (How is that even possible?)  I would have reported a bug long ago if this was available. 
    Has anyone seen this?  I've tried many different things the last few weeks but have given up using AME altogether.  This week I have a little time to troubleshoot.

    Ask in the AME/ Premiere forum and by all means provide some solid technical info - system specs, sequence settings, render settings, footage used. Nobody can help you without that.
    Mylenium

  • My iphone 3gs no longer streams video to my apple tv only sound can anyone help?

    my recently updated iphone 3gs no longer streams pictures/videos to apple tv only sound, can anyone help?

    I have the exact same problem. And my wife's iphone 5 also has the same problem. Anyone knows the resolution? It worked fine before we restored both phones. Thanks.

  • I do not have a video on my iTunes only sound ?

    Since last night, i can not watch any videos on my itunes. I have only sound. All videos are bought through Itunes. Video works in the internet but not on Itune.
    Any Ideas?

    You can route the audio through your TV to your analogue receiver or purchase an adapter for the optical. As you have provided no further details it is hard to say much more.

  • Missing video just sound with a black screen

    Missing video just sound with a black screen it cant be the avi. files because ive made many videos with avi. files

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • 1280x720 mp4 videos stop playing video after update, only sound works

    this is what appears in the inspector:
    h264, 1280QTKitMultiplicationSignWithSpaces720, Milhões
    AAC, Estéreo (L R), 48,000 kHz
    Only sound, no video anymore. It worked fine until the 9.1 iTunes update. Now I can only see the video with the VLC player.
    I have another one that works fine(both sound and video) :
    H.264, 960QTKitMultiplicationSignWithSpaces540, Milhões
    AAC, Estéreo (L R), 44,100 kHz

    Any help ? Thank you in advance. This happened after iTunes update.

Maybe you are looking for

  • Can I use back to my mac to access two daisy chained time capsules running on my network alone or do I also need a mac running on the same network?

    I have a DSL modem router (HUWAI ECHO LIFE 520) with uPNP enabled. The first time capsule´s wan is connected to that router the second time capsules wan is connected to the first time capsules lAN. The router looks at the first time capsule as DMZ an

  • Bug when using alias in sql query?

    I don't know if this is a problem related to the getString function of the MetaData class, or if it is something else. I'm having problems when sending a select query containing a specification for column alias to the execute function of the Statemen

  • Remote desktop connection lost due to intel?

    Since some time i cannot get my intel-macbook connected to my work's windows network through remote desktop connection (version 1.0.3), while i still can do so with my g5-imac. So the network does not seem to be the problem. It used to work but now i

  • EB-invalidate_delegate

    Hi All, I'm using iAS 6.0 SP3 TestDrive. In my EJB, a Session bean, I threw an exception, <isx.swordfish.frontoffice.control.exceptions.LoginFailedException>, but on the client side, I'm catching the <RemoteException>. Is there a reason for this to h

  • Keywords to mulitple images

    The manual says that if I drag a keyword from the HUD to selected images in the browser that it applies the keyword to all selected images but this does not happen. It only applies the keyword to the highlighted selected word in a group of selected i