Pre 9 -- no audio playback

The playback of all clips does not have audio output. However when I scrub the timeline, I can hear that there is sound. When I "Share" the final project (creat the DVD) the sound is complete as I expect it to be on the DVD. Pre 9 has played sound on this computer for some projects and clips before, but now does not seem to work for any clip or project. The system audio default hardware is properly set in Windows XP, and when the final DVD is played in this computer, all audio is working.

Since you say that no video or audio that you add to Premiere Elements plays with audio but that your other media players on your computer do, that probably indicates an issue in the program's set up. Go to Edit/Preferences/Audio Hardware and ensure the configuration is set up to match your actual hardware set-up.
Also, right-click on the video displayed in Monitor panel and open the Playback Settings. Sometimes changing the settings there can help.
You may also want to ensure you have the latest RealTek HD audio codecs.
http://www.realtek.com/downloads/

Similar Messages

No Audio Playback due to Error Message "Disk is too slow. (Prepare) (-10001)"

Out of the blue, no audio playback. Was working just fine earlier today.
I repeatedly get the error message:
Disk is too slow. (Prepare)
(-10001)
NOTE: I have more than enough disc space. That is NOT the issue.
I also just got a second error message:
Part of the Project was not played
This project has too many real instrument tracks to be played in real-time. To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
NOTE: Odd as I have only 2 tracks in the GarageBand file.
Any others experience this? Suggestions?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Premiere Elements 12 - Gaps in audio playback

Hello everyone!
I have a problem with Adobe Premiere Elements 12: when I play video in timeline or preview window, there are lots of gaps and pauses in audio playback, even though video is playing smoothly. Usually the pattern goes like this: 2 seconds of clean audio - 0,5 seconds silence - 2 seconds of clean audio... etc.
I have tried the following:
- change audio buffer settings
- change audio device (I have tested with integrated audio chip ("High Definition Audio"), M-Audio Fast Track Pro and cheap USB audio interface - same results with all of them)
- start a new project with correct settings and import only one file
- disable background antivirus monitoring
Usually source material is AVCHD 1440x1080 25fps (PAL, MTS-file) from small Sony camera, but this problem seems to continue even if I insert only still photo and mp3 audio to timeline. CPU load is about 6% during playback. It seems like Premiere Elements makes these gaps to playback signal before sending it to audio hardware?
Computer specs: Intel Core i7-4770 @ 3,4GHz, 16 GB RAM, 128GB SSD drive for OS & software and 2.0TB 7200 rpm drive for video, Intel HD Graphics 4600, Windows 8 (64bit).
I would be really grateful if someone could give me some tips to solve this annoying audio playback problem.
EDIT: I forgot to mention that this problem occurs all the time - even when video is rendered in timeline.

Thanks for the quick response, TonyPh12345. Clearly not what I was hoping for but not unexpected. BB

Performance hit in audio playback in Solaris 10

Hi,
I've noticed while trying out the Solaris 10 beta 72 that the audio playback quality took a major hit since Solaris 9. I was hoping that this would go away in the Solaris 10 release, but it's not the case.
If I try to play an .mp3 file with mpg123 or even audioplay an .au file, there are regular clicks in the playback, audible about twice per second. Booting into Solaris 9, the audio playback is perfect.
My intuition tells me that the integration of DTrace into the kernel is the culprit, but of course, I have no proof. Can anyone think of a way to test this theory? Can DTrace be disabled? Maybe DTrace can be used to figure out what's going on?
martin-dot-przyjazny-at-eds-dot-com

Hi,
I've noticed while trying out the Solaris 10 beta 72
that the audio playback quality took a major hit
since Solaris 9. I was hoping that this would go
away in the Solaris 10 release, but it's not the
case.
If I try to play an .mp3 file with mpg123 or even
audioplay an .au file, there are regular clicks in
the playback, audible about twice per second.
Booting into Solaris 9, the audio playback is
s perfect.
My intuition tells me that the integration of DTrace
into the kernel is the culprit, but of course, I have
no proof. Can anyone think of a way to test this
theory?You can be assured that DTrace is not the culprit. When DTrace is not running ("pgrep dtrace" to be sure), there is no effect on system performance.
Maybe DTrace can be
used to figure out what's going on?DTrace could certainly be used, but some basic facts would be helpful. As Juergen asked, which audio driver is this and on what machine? And how idle is the machine when audio playback is running? Is the machine power managed?
- Bryan
Bryan Cantrill, Solaris Kernel Development. http://blogs.sun.com/bmc

IPhone 4 audio playback cuts out after latest update (5.1)

My phones audio playback ( podcast, audiobook or music) cuts out at random intervals during playback.
This happens when listening through apple headPhones or my audio lead aux input to my stereo.
This has only started since the last software update (5.1). It's really frustrating as you often hit the jump back or forward arrows when restarting, instead of the intended Play symbol ( they are close together). This is really frustrating when your listing to an hour+ podcast.
Is anyone else having this problem since the update?

Same problem here! My phone was functioning correctly after the update until today, when it randomly attempted it's own emergency call, then requested that I turn on location services. When I hit cancel, it repeatedly requested that I turn on the service. When I agreed to turn on location services, it defaulted to the screen with the iTunes logo and the USB cable. Since then, I have been unable to get it to function. The phone has been switching between a black screen and the apple screen and buzzing periodically. When I touched the apple, it pixellated and melted away. I did see a message that the iPhone needed to be activated once and very briefly. I managed to connect it to iTunes using an old troubleshooting guide, but when I asked iTunes to restore it to factory settings (politely, thank you), it gave me error 21 (unknown error) and said it was unable to restore.
Hopefully someone has an answer...?

AIR + Android audio playback in background

Hello everbody,
at the moment I am evaluating the realisation auf a radioplayer using a rtmp stream for android devices.
There are two question for which I could not find any advices or resoltions.
My questions are:
1.) Is it possible to play/continue an audiostream, even if the app itself is pushed into background?
2.) How are updates handled for apps in Android-Store? Is it the same as with the updateroutine for AIR on Desktops?
Thanks in advance for your answers.
Regards,
wman

Hi Varun,
thanks for your answers.
Are there any ressources/links, maybe on adobe devnet, available for audio playback while app is in background?
I already searched the web so far, but could not find any hints.
but anyway thanks for your response!
Regards,
wman

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Audio playback stops short

Has anyone had problems with audio playback in a previewed or published presentation where the playback stop short and advanced to the next slide?

Brian,
The fact that this mp3 is about the same size as a standard 16 bit/44.1k stereo file of a 3 or 4 minute song, indicates to me that it's an extremely long file.
I'm willing to bet you have run into the measure limit within a Logic song. It's 2000 something (can't remember it exactly).
The standard work around is to drop Logic's tempo to something really slow, thus allowing the larger file to be able to play within the Logic song limit.
See if that's it...

X201 hangs and makes noises during audio playback

Hello, I've a 3249CTO X201 with 8g of ram and an updated Hdd (seagate momentus xt 500gb with 4gb ssd).
I had issues with the Hdd that where partially resolved with a seagate firmware update (the hdd kept going from standby to active mode without apparent reason and it was assumed to be a too agressive power saving mode...)
Anyway, my issue here is the annoying chirping sound coming out the speakers during any audio playback (online audio streams, films, mp3, youtube... you name it!) anytime the Hdd is accessed.
It even seems like everything just hangs for anywhere between 0 and 2 seconds at the exact same time.
It only happens when on battery and using w7 pro 64bit. If I use ubuntu from my 8g sdhc card, it never occurs (even if I use chrome on both and watching the exact same youtube video). (NOTE that I did access the hdd from ubuntu to prove my point...)
I think it is related to the power gestion of the system and I've tried a countless serie of different power management settings. It affect the frequency of the episodes (would occur more or less often) but it still happens.
When plugged in, it never occurs....
If it doesn't occur under ubuntu (I mean never!), it should not be hardware related, however the w7 way of managing power is different so I tend to think there IS a hardware issue (weakness) wich might be highligted by the OS.
Anybody has a good lead on this?

Hello Fafaneboat,
It might be an issue with firmware of your system, I would like to suggest you please visit the below mentioned web link to download and install few drivers according to your Operating System.
support.lenovo.com/en_SG/downloads/default.page?
Kindly put your 7 digit TYPE-Model(3249CTO) number of the system in the Quick path
1. Please download and update the Power Management driver and Power Manager(Please uninstall the previously installed driver and software first).
2. Please download and update the BIOS of your system.
To check the previous BIOS version and date, please click on START> type msinfo32> press Enter. It will open System Information Window. You can check the BIOS version and date from there. Kindly match the driver version and date and if the driver and download link have updated driver then please update the BIOS of your system.
Please perform and check how it goes, It might resolve the issue.
Regards,
Harish
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

No audio playback

I'm getting an error upon itunes launch 'detected a problem with your audio configuration and audio playback will not work' and it isn't. Upgraded itunes and problem persists. Any other hints?

It did not work so I started playing around with cables and found that the speaker cable was plugged into the wrong port!
Always start with the simplest solution first I guess.
Thx!

Audio playback delayed thru Firewire monitor - JVC BR-DV3000

First I apologize for the length of this post, but I want to make sure I've adequately described the problem. For years, I've edited with FCP using a JVC HR-DVS2U (DV/SVHS combo deck) with great results. I use it to capture and output through firewire, also connected is a monitor and a UVW-1600 Beta machine.
Now a buddy of mine also has a system using a JVC BR-DV3000. When I attempted to set his system up similar to mine, using the DV deck as the conduit for monitoring and recording to beta, he complained about audio dropping out at the beginning of transitions in the timeline. This was the weirdest thing! How does the DV machine know that a transition is taking place?! I thought it was just data out. I finally traded out machines with him and hooked it up to my system. At first, I didn't have any problems. I mainly edit 30-second commercials, so I played back a timeline with three dozen transitions in it without a hitch! So now I'm really confused, until one day I had a 20 minute long timeline of about 20 promos back to back, all digitized from beta. Sure enough there was the audio playback delay. I switched the audio playback from firewire to computer audio out and I did not have the problem, but I could not record out to tape in this configuration. Then I thought maybe it's just the length of the timeline, so I opened up a commercial timeline that plays back fine and pasted one of the beta promos in there. The 30 second spot played back fine and then when it hit the beta vid it had the audio dropout. Now understand, the audio is NOT out of sync, it just drops out for about two seconds when playing back from the timeline. You can watch the VU meter on the deck, it completely loses the audio for two seconds, mostly when you first start the timeline and at most transitions. I now think it may have something to do with the source material. I just digitized some video from DV that was shot on a JVC camera, when most of the stuff I shoot is from a Canon XL1. The JVC camera footage has this dropout issue. Any clues?

This has happened to me too. The problem is with the firmware in older DV3000 decks. JVC has an update, but you can't do it yourself. JVC or your dealer will have to do it for you. In the meantime there is a workaround. Make sure your DV3000 is powered on FIRST. Then start FCP. That trick always worked for me. Good Luck.

Problems with audio playback in 10.3.9

hi all- I've got a really weird problem with the audio playback of my G5; when I try and play an mp3 (in Itunes or in the finder window as a preview) the playback "stutters" arbitrarily. This goes for any mp3 - Has anyone come accross this type of problem before?
I've run checks both with my external soundcard (a motu 828 firewire card) and apple's internal sound, but this seems to be some sort of software problem.
HELP!!! I'm tearing the (little) hair I have out!!!
thanks
Lolo
Power mac G5 2x2 Ghz & G4 titanium 667 mhz Mac OS X (10.3.9) 512 ram on G5 and 1 gig ram on G4; both computers are used for audi home studio

Right.. 10.3.x doesn't automatically pull down mobile users' files. It only creates a new local account on the machine, but gives you the control over the account through WGM.
BTW- if you want to sync the ~/Library folder, you will need to use 10.4.3 Client (I think) and above.
_Brett

HTML5 Audio Playback issue from firefox 33 and above.

I have created an application which was working just fine till firefox 32. It is still working fine in firefox 32. But from firefox 33 and above, the audio playback does not start intermittently.
I tried to debug and find the problem further. What I observed is that the html5 audio element in firefox 33 and above does not dispatch 'readyState' event as 4 which is needed to start the playback. It shows its value as '2' due to which, the 'canplay' event is not getting triggered.
This issue is replicable on local machine as well using some bandwidth throttling software. Also, it is important to note that this issue is visible on MAC's firefox. On windows, things are working just fine.
If anyone has any solution of this problem, please let me know.

Actually, I ran all but ADW and I included Super AntiSpyware. There is no virus. It is only V33+ and other browsers work fine. I think I will give up on Firefox for now until I upgrade to Win 7.
Thank you everyone for your input.

Audio Playback not working?

Hello
Just recently opened iMovie 08 after a while away and seem to have a problem with the audio playback. When skimming in the source video you can hear that there is audio, however when you want to play it by hitting spacebar there is no audio. When i drag the video to the project window and play, the same again no audio?
Can anyone shed any light on this matter? The more i used this version the more i dislike it arrrrrrrr.
Cheers,
Glen.
Thanks.

i had same problem last night and i messed around with it today and got it to work by finding imovie event or project folder drag to desktop restarted then returned folder to original location open and it played just like new try it and hopefully it will work for you

Audio playback in Final Cut Express 4

Captured some clips and started a sequence all was fine. rebooted the software to get around an issue where it wouldnt let me drop any transitions in which is now fine. Now however im not getting any audio playback even though i can see the audio on the VUs. Now in system setting i Audio capture in the scratch disc section is not highlighted.. This is doing my head in cant find away around it. Please help..

Ignore the greyed out "Audio Capture".
It has always been like that and you can't alter it from the scratch disk you have set for the video.

Since installing iTunes 7.3, all audio playback on CD/DVD drive skips

Hi,
I am running Windows XP home edition, and have recently downloaded iTunes 7.3.
Since installing iTunes, all audio playback via my CD/DVD skips/stutters. This occurs in all media playes, Windows Media, Sonic DVD etc. Audio files stored on the hard drive play back fine through these same programs. So far I have updated firmware and drivers for my CD/DVD drive and sound card.
I have looked on this site and Dells, and cant find any solutions as to what the problem may be.
Can anyone help?
Cheers
Aidan

One thing you could try is to check your computer manufactures site to see if there is a firmware update for your CD drive.
Apple offer this help on this:
http://docs.info.apple.com/article.html?artnum=302975

Pre 9 -- no audio playback

Similar Messages

Maybe you are looking for