PRE 9 - Photos - recommendation for pixel and resolution setting

I would like to integrate photos in between video segments, as well as on the actual video. Before bringing these photos into PRE 9, what should I resize the photos to (pixels and resolution). I will be using Premiere Elements to resize the photos. I'm burning a HD DVD at 1920x1080 pixels.
Thank you.

I agree with Neale. Scaling the images in PS/PSE, to just the pixel x pixel dimensions that you need will do two things for you: get you the best quality, and eliminate excess overhead, when pushing a bunch of unused pixels around. This ARTICLE will give you more. Note: it was started, before HD took over the market, so just read all of the 720 x 480 dimensions as 1920 x 1080 (in your case). I went on to add comments on HD, but some get confused, when they see the 720 x 480 in the beginning.
Good luck,
Hunt

Similar Messages

How do I set up pixels and resolution to print out my illustration?

I want to print my illustration which I'm going to paint on Photoshop 5 to the size of 8x10(inch) at Walgreens.com. How do I set up the pixels and resolutions in Photoshop to start with?
There was a guideline at Walgreens Photo site, and it says "Minimum Recommended Image Resolution for 8x10 (inch) is 900x720 pixels." But when I set up the width and height of pixels to 900x720 and resolution at 360 and then painted there, the print outcome was chopped off at top and bottom (I selected 8x10 print size.)
How can I set up the right way so I can print right?
Thank you!
-Mitama

OK, it says minimum requirements. Which makes sense, the quality would be horrible below 112 ppi.
8" x 200ppi = 1600px
10" x 200ppi = 2000px
900px / 8" = 112.5ppi
720px / 10" = 72ppi
Can you see in the above math why part of the picture would be chopped off.
Lets do it this way:
900px / 72ppi = 12.5"
720px / 72ppi = 10"
900px / 360ppi = 2.5"
720px / 360pp = 2"
10" X 360ppi = 3600px
8" X 360ppi = 2880px
If you specify ppi you must specify the physical dimensions (inches) Especially when the printed paper is a known variable. The pixel dimensions they mentioned was a guideline not a requirement. They only wanted to make sure the quality did not fall below that value.

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

What exactly is the difference between the new photos app for mac and iPhoto? i'm very confused...

Ever since i've bought my macbook pro i used iPhoto to organize my photos. Now apple added this new photos app and i don't really understand what is it meant for? can someone please explain me the difference? I'm very confused about the purposes of both apps....

Now apple added this new photos app and i don't really understand what is it meant for? can someone please explain me the difference? I'm very confused about the purposes of both apps....
Photos is a completely new designed photo application, designed for Yosemite and the MacOS X versions to come. Many differences are under the hood. It uses the new system libraries and frameworks for more efficient image processing on the new powerful macs, like the mac pro, it is extensible by app extensions, if other developers will add functionality, and most important, it brings integration with iCloud Photo Library. With Photos you can store your photo library in iCloud and sync it across all devices.
Some features are still missing however, and you can continue to use iPhoto, if you like. Or create a small Photos library for testing and explore Photos, while keeping your main libraries in iPhoto.

Allowing Airwatch MDM access to the Captive-Portal guest users in pre-auth role for android and BB?

Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any   alias Airwatch svc-http permit
any   alias Airwatch svc-https permit
ip access-list session Google-Play-Store
               any   alias Google-Play any permit
ip access-list session BlackBerry-Access
               any   alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play                                                                                ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.

Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence!  Thanks,Chris

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

How many GB are recommended for downloading and watching movies on an ipad?

how many GB are recommended for downloading and watching movies on an ipad?

I agree. With a 16 gig you'll find that you only have room for a couple of movies once the operating system and any other apps take up their space.
The other alternative would be to look into something like a wireless harddrive, where you can store your movies and stream them to your iPad via an app. However if you're purchasing content from iTunes that may/may not work. So if you consider that you may want to dig a little deeper and make sure it'll do what you want it to do.

My daughter received an I phone for Christmas and we set it up using my iTunes account. She just received an iPad and wants to set up her own iTunes account. How do we do that without lsing all of her content that she added to my iTunes account.

My daughter received an I phone for Christmas and we set it up using my iTunes account. She just received an iPad and wants to set up her own iTunes account. How do we do that without losing all of her content that she added to my iTunes account. I have home sharing on my account.

Welcome to the Apple Community.
If she creates her own iTunes account she can't use any protected content purchased under another account. She can play unprotected content synced from an iTunes library on a computer, but she can only download content from the cloud that is purchased under her account.
It's a pain I know, but the longer you put off the move, the worse the situation will become.

What photo album software do you recommend for CS4 and/or CS5?

I want to do pagination, design and layout in CS4 (multiple photos per page, text, etc.) to create printable albums. These albums could be either social event or documentary purposed.
Many such photo album software programs are proprietary which obliges you to use a specific printer or lab. Are there stand alone photo album software programs out there, CS4/5 which allow you to create photo albums and then print your own albums or use a vender of choice to print your albums?
I've seen everything from $29 thru $400, and some which are priced beyond $800.
What is your favorite photo album software for CS4 and/or CS5?
Thanks for any help you may provide.

It sounds like you are trying to create scrapbook pages ... if so then its quite easy just to create them yourself using Photoshop. You can purchase scrapbooking kits which will give you all the background papers and elements that you need to add to your page. There are also many free kits around ... a quick google search will show you lots of them
Sets of the pages can then be uploaded to sites that will print out a book ...
Wendy

Is it possible to "partition" Iphone or Ipad when syncing? What I would like to do is set up Itunes to use say 15GB for photos 15GB for music and 15 GB for video. Any help would be appreciated. Thx

I am using a Widows 7 PC with the latest Itunes. I would like to alot hard disc space on my 64GB Ipad2 as follows 15GB for music, 15GB for Video and 15GB for photos. I would then like Itunes to autofill from my PC. Can this be done? The same question also applies to my Iphone4. Thanks in advance

To my knowledge the iPod can only be used as a secondary monitor since you have to boot up the Mac and turn on the secondary display. You would still need a KB and pointing device for the Mac
However, you can log into the Mini from an iOS device like an iPad using app like LogMeIn, GoTo MyPC or TeamViewer on both the Mac and the iPad. You use the touch screen on the iPad for all control of the Mac.
As you said,that would be tedious for a lot of typing but you could use a BT keyboard for the iPad.

Photos in ibook pixellated and blurry

After creating and editing several ibooks, the photos my latest book, edited over SEVERAL HOURS, reopened the next day blurred and pixellated. When created, the photos in the book were tack sharp ( I have used Photoshop for more than 10 years and the photos are correct in size and resolution). The photos in the other books are sharp but the photos in this book will not return to their original sharp condition. Yes, I can waste several more hours redoing the book but why should I? Any reason why this happens that anyone knbows? I have the latest imac and the latest OSX and the latest iphoto version. Thanks if you can explain it.

Not come across that one before, might be a caching issue.
Option 1
Back Up and then try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.

Best air print photo printer for mac and iPhone

looking to purchase a new all in one photo printer for both mac and iphone, any recomendations

If you want a really good fast printer I recommend the Office jet Pro 8600

Photos in Monitor Pixelated and Offset

All - see screen shot below. Don't know why the photos in monitor are pixelated and offset (echeloned to right by bands).
The same ones in slideshow viewer are fine. The problem is, when I preview, I get the bad shots. Need help! Thanks...
Bruce

Details?
This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Pre changed passwords for Gmail and Facebook?

I just got my Palm Pre yesterday, and I'd totally love it except for one issue - it seems that it reset or changed my password for my Gmail and Facebook accounts. Initially I had no trouble with the phone - I was able to access and sync my email/facebook to the phone and use them. I then used both from my desktop computer, no problem. I tried it again a while later (maybe 30 minutes) from the desktop and the passwords were invalid.
I've been trying to reset my Gmail password, but because I can't access the alternate email (that's what I get for not loggin into it for literally years and forgetting the answers to the security questions) I've been having a REALLY hard time with it. I have no idea how this happened or what I can do. I *really* need access to my email!
Help.

HI,
It used to be that for iChat we used to have to tell people to set up their Google Account using their Google ID exactly as it shows on the Google Web Mail Page (Or iGoogle) to make sure they had to "right" ending.
The Server is talk.google.com
This does not follow the format used by other Jabber servers which take the last part of the ID and pulls that through to the Server Setting tab and this is why iChat and the versions of Messages have a separate Google option to add the Account.
The next issue would be to then check the Mac firewall
It is in System Preferences > Security and Privacy > Firewall.
It will need Unlocking.
What used to be in the Advanced Button is not in the Options Button
In here if the Firewall On then the Allow Signed Software needs to be Enabled and Messages and IMAgent need to be in the list.
If you have to Add Messages or Enabled the Signed Software bit it will pay to restart the Computer.
The System should add IMAgent itself (Or at least ask you to confirm)
Next we have to consider the Router.
If you used Port Forwarding with your Previous OS (or even computer) you may find the IP the computer has at the moment does not work for the Port Forwarding you set up.
Ideally use UPnP if you device has it.
It allows for Multiple computer s to use the same ports. The ports open when the app needs them and close after certain period on Non use.
For Messages and iChat it also allows Screen Sharing to work as this part uses a random port.
9:07 PM Wednesday; July 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I open a new photo it looks pixelated and blurry but that is not how the original looks.

I got a message a few days ago after my computer froze, but everything is updated. How should I fix this?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

PRE 9 - Photos - recommendation for pixel and resolution setting

Similar Messages

Maybe you are looking for