Pre-Build VM for IAM and OAM 11G

Hi,
Is there any pre-build VM available for IDM and OAM 11G version to download and use it?
Thanks,
Meera Hussain

Hello,
VMs provided by Oracle are available at Oracle VM Templates
I don't think IDM is available right now.
-Sylvain
When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

Similar Messages

Best practices on enterprise and application roles in OIM and OAM 11g?

Hi, all,
I wonder if any of you can give me some advice on role design for OIM and OAM 11g. I'd like to have both enterprise roles, such as Accountant II, and application roles, such as App1_User, App1_Admin, etc. Ideally, the enterprise role would automatically give the user the appropriate application roles, but I can't figure out how to do that. We tried using OIM 11g's inheritance, but when the application role is inherited, OAM doesn't see it in OID/OVD and therefore doesn't think the user has the correct authorization to access the application. I thought about using role membership rules, but those seem to only allow you to use user attributes to control membership, which doesn't help at all in my situation.
How is this situation best handled? Any advice much appreciated!
Ariel Anderson
Senior Business Analyst
Zirous, Inc.

Hi,
I am assuming in clustered environment you are having two instances running.
It must be an issue with a single server,,because the problem is intermittent.
To see which server is causing problem....just perform the following steps:
1) Stop server1 and keep running server2..and fire new registration request...
2) stop server 2..and keep running server1.....and fire new registration request.
Using above, atleast you can see which server is causing the problem...
Regards,
J
Edited by: J_IDM on Mar 21, 2011 10:52 PM

Allowing Airwatch MDM access to the Captive-Portal guest users in pre-auth role for android and BB?

Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any   alias Airwatch svc-http permit
any   alias Airwatch svc-https permit
ip access-list session Google-Play-Store
               any   alias Google-Play any permit
ip access-list session BlackBerry-Access
               any   alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play                                                                                ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.

Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence!  Thanks,Chris

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

[svn] 3158: -integrate AIR build 20080905ap for windows and mac

Revision: 3158
Author: [email protected]
Date: 2008-09-09 12:16:23 -0700 (Tue, 09 Sep 2008)
Log Message:
-integrate AIR build 20080905ap for windows and mac
-update air-config.xml to target Player 10: bug: https://bugs.adobe.com/jira/browse/SDK-16417
-fix air-config.xml; modified the external library-path: bug: https://bugs.adobe.com/jira/browse/SDK-16732
-fix build.xml so the web installers are included in the sdk package, no bug
-update frameworks/projects/airframework/build.xml for AIR to target player 10
-updaet build_framework.xml for AIR to target player 10
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16417
http://bugs.adobe.com/jira/browse/SDK-16732
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/frameworks/air-config.xml
flex/sdk/trunk/frameworks/build_framework.xml
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/in/air/air_version.txt
flex/sdk/trunk/in/air/mac/AIR Integration Kit.tbz2
flex/sdk/trunk/in/air/win/AIR Integration Kit.zip

This is from a tester describing what happens on a Mac:
No the program does not launch properly on the Mac
What happens is this.
I open my applications folder
I open the App Folder and see another folder labeled Program V2.1
I open that folder and see the Program blue icon which click to launch
The folder disappears and the blue Program icon appears in my dock along side other applications looking ready for launching.
This is where the problem starts
If I click on the blue Program icon which is in my dock along side all of my other application icons they all drop off the screen. like the screen resolution changed suddenly or something,
The menu along the top of the screen also moves off the screen . in the same manner
so my desktop which usually has a visible dock at the bottom and a menu bar on the top now doesn't show either of those elements.
I do have a couple of document icons on my desktop , you know text files or what ever they never move
If I now click my mouse anywhere on the screen all of the icons return including the blue Program icon still sitting in by dock, if I click it again same sequence of actions.
I deleted and reinstalled the latest version of Adobe Air and got the same result
I also want to mention
The top menu on the mac tells me what application is active, you know "finder" "Open office" "Firefox" what ever is program is running and active shows there
Program has never show up as being active in the top menu so I'm guessing never fully launched

Building blocks for incentive and commission management

Hi Gurus,
I am in need of building blocks for Incentive and commission management, I appreciate if anyone can provide me this above... .
thanks
chandra

hi
see ICM never goes independently,so you wonnt have any help on ICM alone,it works in collabvoration with different transactional data,like opportun ity and channel management.
try these links
http://help.sap.com/saphelp_crm60/helpdata/en/8d/ed100ab6ff425a92458921a551efcd/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/c6/b42d824113469aa04bf695e743c8f4/frameset.htm
best regards
ashish

OAM 11g Single Sign-On and OAM 11g Cookies

Hi all,
I need to know following,
is it possible to get the username and password from the OAM 11g + IIS Webgate cookies and forward the same to the application for further authentication? is there any way to decrypt the cookie and use the information in the application?
Regards.

Yes , you can get the user password ,but for that you will have to write a custom plugin , else it is not possible.
Refer step number 9 in the blog Single Sign on with Oracle Access Manager: Creating a Custom Authentication Plugin

Pre-Build requirement for buliding interface

Hi all,
I need to esablish interface between one Web enabled architecture system and SAP-ISU.
Its front end is Web viewer .application tier is XML over HTTP.
what messages we can handle from this system to XI-SAP-ISU.
Do we need any pre-build requirement?
Regards,
venu.

Nothing special is needed. You're just in the perfect situation in which you can even avoid using the Adapter Framework. In fact, sending messages to and receiving messages from the webapp can be done via http plain adapter, which is on XI abap stack. (btw, nothing against AFW, just one component less
For ISU, as you know, you can use whatever you fell right: rfc, idoc or even abap proxies (if you are on was >= 6.20)
Alex

How to run a silent configuration for Forms and Reports 11g ?

Hi all,
I've run a silent installation for Oracle Forms and Reports 11g R2 in Windows 7 64 bit.
I made it using a response file called install_only.rsp. Now I want to run the configuration also in silent mode.
How can I do it ?
I know that I can use a template called configure_only.rsp. However, i don't know what is the correct syntax for the command to start configuration.
Should I use the same setup.exe installer and inform configure_only.rsp as response file ?
The command below is the appropriate command for this task:
setup.exe -silent -response configure_only.rsp
Or is there another way to be followed?
Thanks a lot.

Alright, I eventually found the answer.
Configuration must be run from directory on windows.
Command is shown below:
<FORMS_HOME>/bin/config.bat -silent -response <path-to-response-file>

Trying to get hold of my own course pdf for performance and tuning 11g, would oracle have list of classes i have taken?

Tyring to find my own course pdf for oracle performance and tuning 11g that I took thru Oracle.
I am studying for 1z0-064 currently using 10g perf tuning book.
Would Oracle have list of Oracle classes that i have taken.
If they do, is there any way to get hold of the pdf from the class that I took?
I realize that this is a stretch.
Roger

Roger,
This is a question that you'd need to contact Oracle University Support about - Oracle University Contact Information. They should be able to help you.
Regards,
Brandye Barrington
Oracle Certification Program

Another CS6 Worksation Build Proposal for review and comment

Hi All,
I've put together the following video editing system build after reading this forum for many months and would really appreciate any feedback or comments. Of particular interest are comments on the hard disk setup, location of the media cache and connection speed and disk size allocation. I'm trying to put together a fast, stable, easily managed system from a file management perspective for home video editing using CS6. Video Editing will be the primary task for this workstation but it will also be the main desktop PC in the house for other general computing purposes.
Motherboard:
ASROCK Extreme 11
CPU:
Intel 3930K
Memory:
GSkill 1600MHZ RipjawsZ PC12800 8 x 8 64gb
Graphics Card:
EVGA 4G GTX680 Classified 04G-P4-3688-KR
Power Supply:
Corsair AX1200i
Case:
Coolmaster Cosmos II Black
Optical Drive:
Pioneer BDR-207DBKS Black 12X Blu-Ray Writer
( 1 X 3gb SATA connection )
CPU Cooler / Fan:
Noctua NH-D14 Socket 2011 Special Edition CPU Cooler
Software / OS:
Windows 8 Pro 64 bit
Storage:
C Drive: OS, Programs, Pagefile
Samsung Series 840 Pro SSD 512gb
( 1 x 6gb SATA connection )
D Drive:
Media, Projects
2 x WD Velociraptor 10000 rpm HDD 1 TB ( RAID 0 ) = 2TB TOTAL
( 2 x 3gb SATA connections )
E Drive:
Previews, Exports, Media Cache
Samsung Series 840 Pro 512gb SATA 3 6GB/s SSD ( RAID 0 ) = 1024gb TOTAL
( 2 x 6gb SATA connections )
F Drive:
Backup
2 X 3TB Seagate Barracuda 7200 RPM HDD ( RAID 1 )
( 2 x 3gb SATA connection )
I chose the ASROCK Extreme 11 due to the number of SATA3 ports. I haven't found any other 2011 socket mb's with the amount of SATA ports I require. Any alternatives recommended ?
My understanding is that HDD's wont benefit from a 6gb SATA3 connection so there is no point using these ports for any HDD - is this correct ?
I have viewed Todd's 'Optimizing Hard Disk Video' where he puts the Media Cache on the C drive. Where would you recommend the Media Cache be placed ?
My intention is to backup everything from both D & E RAID 0 volumes to F drive. I note some systems and recommendations have the exports being written directly to the larger, slower backup HDD but doesn't this mean the export takes longer to write ? I am assuming I am better off writing out my export file to a fast SDD and then backing up to my F: HDD later.
Any comments on the size of my E drive for Preview, Export, Media Cache...would 2 x 256gb drives in RAID 0 be adequate, considering I'm using this drive purely as temporary storage.
I also acknowledge that the C drive at 512gb may be overkill but I'd rather not run out of space there, especially if I need to use that drive for the pagefile and media cache or anything else recommended.
I look forward to reading your comments and suggestions and really appreciate any feedback / alternatives suggested.
Kind Regards
Martin.

Hi Harm,
Thanks for the feedback - very much appreciated.
The reason I chose the 1600mhz sticks instead of 2133mhz was because of stability fears, not because of price.
Also, I don't think I have seen any 64gb memory kits running at 2133mhz ?
If you think using the 2133mhz memory is worthwhile and stable, and gives a valuable performance boost I will consider that upgrade.
The GSkill 1600mhz is 1.5 volts and I have read concerns on this forum about using that voltage.
I'd really appreciate any suggestions from anyone about what 64gb 2133 mhz memory kit to purchase that is stable and runs well with an ASrock Extreme 11 motherboard and the 3930k processor.
As per other posts on this forum regarding memory, I'd rather have more memory over faster memory, hence why I am going for 64gb straight away.
As to the C drive size, I'll consider scaling that back to 256gb
Thanks again for reviewing and taking the time to comment.
Cheers Martin.

Pre changed passwords for Gmail and Facebook?

I just got my Palm Pre yesterday, and I'd totally love it except for one issue - it seems that it reset or changed my password for my Gmail and Facebook accounts. Initially I had no trouble with the phone - I was able to access and sync my email/facebook to the phone and use them. I then used both from my desktop computer, no problem. I tried it again a while later (maybe 30 minutes) from the desktop and the passwords were invalid.
I've been trying to reset my Gmail password, but because I can't access the alternate email (that's what I get for not loggin into it for literally years and forgetting the answers to the security questions) I've been having a REALLY hard time with it. I have no idea how this happened or what I can do. I *really* need access to my email!
Help.

HI,
It used to be that for iChat we used to have to tell people to set up their Google Account using their Google ID exactly as it shows on the Google Web Mail Page (Or iGoogle) to make sure they had to "right" ending.
The Server is talk.google.com
This does not follow the format used by other Jabber servers which take the last part of the ID and pulls that through to the Server Setting tab and this is why iChat and the versions of Messages have a separate Google option to add the Account.
The next issue would be to then check the Mac firewall
It is in System Preferences > Security and Privacy > Firewall.
It will need Unlocking.
What used to be in the Advanced Button is not in the Options Button
In here if the Firewall On then the Allow Signed Software needs to be Enabled and Messages and IMAgent need to be in the list.
If you have to Add Messages or Enabled the Signed Software bit it will pay to restart the Computer.
The System should add IMAgent itself (Or at least ask you to confirm)
Next we have to consider the Router.
If you used Port Forwarding with your Previous OS (or even computer) you may find the IP the computer has at the moment does not work for the Port Forwarding you set up.
Ideally use UPnP if you device has it.
It allows for Multiple computer s to use the same ports. The ports open when the app needs them and close after certain period on Non use.
For Messages and iChat it also allows Screen Sharing to work as this part uses a random port.
9:07 PM Wednesday; July 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Building slideshows for emailing and the web. ie. compressing, max file si

I need to build a slide show for work with music and wish to email it as well as post it on my website. First, do you recommend using the full size files when building the slide show or resizing them first to help with the compression later. Second, after building the slide show should I export it to imovie and then to quicktime where I can compress it or do you recommend any third party applications? Most important is to use as many images as possible, add music, keep the quality as high as possible and then be able to send it over the web.
Any suggestions would be great,
Thanks!!!

numbers1
Welcome to the Apple Discussions.
1. No matter what app or format you use if you want to
keep the quality as high as possible
you're going to have a large movie file - very likely too large to email.
2. iPhoto has a limited enough ability to make slideshows that are cut to music. You can make the entire thing in iMovie or in an app such as PhotoToMovie or Final Cut Express. All of these have greater export options than iPhoto. Here's an example of such a thing made in Final Cut Express: http://www.youtube.com/watch?v=gpIdFcoYsss. The file was exported at HD quality and compressed by YouTube. If Final Cut is beyond your budget then my next choice would be PhotoToMovie.
3. Don't compress the files in any way until exporting as a movie, you're only adding to the damage.
Regards
TD

Is anyone aware of a Building Block for Blackboard and iTunesU?

We are having some difficulties getting our authentication up and running using our Blackboard system as the transfer authority to iTunesU. We are trying this with the Perl script but may not be working at this right. I thought that there might be enough Blackboard users and programming gurus out there that perhaps someone is working on a Building Block to use with Blackboard and iTunesU.

We have a process to go from Desire2Learn to iTunesU. You should be able to do the same sort of thing with blackboard.
What we did, is we setup a javascript post request coming out of Desire2Learn. This post request contains the course name, username and a few other important bits of information. This request goes to one of our servers which processes the passed information, and generates the necessary itunes tokens and then startes the itunes u authentication process.
There is no reason why you couldn't do something similiar in blackboard. Either way, you are going to need a "middleman" server to intercept the request out of Blackboard, and then process it and iniatiate the iTunes U authentication process.

Source Code Analysis tool for BPEL (and BPMN) 11g

Hi,
We are checking for the availablility of 'source code analysis' tools (analogy like findbug, checkstyle) for BPEL / BPMN Orchestrations.
Any information/pointers to it is really valuable and appreciated.
Thanks,
Pavan.

Hi AnujaMoharir,
Welcome to MSDN.
I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Pre-Build VM for IAM and OAM 11G

Similar Messages

Maybe you are looking for