Pre-calulation of works books errors : Precalculation failed: E Path

Hello,
I have been trying to test our pre-calucation server (Which has been new installed) and for testing I have created two workbook one in the 3x version and the other 7.0 version. I have run into the following issues:
1. In Tcode RSPRECADMIN I chose test of pre-calculation. Here is where the problems start
a) When I do an F4 on Workbook entry I only see 3x version workbook and not the 7.0 version which is
wierd !
b) On choosing the 3x version and hitting execute I recieve an empty workbook.
2. On trying to execute precalucation service using the broadcaster on the web the service fails for both the
workbooks with the following error messages (same in SLG1 too) :
"Precalculation failed: E Path cannot be null. Parameter name: path"
I have gone through a lot of posts and a couple of people have had the same issue but have no information on a definitve fix.
If anyone had the same issue and were able to resolve the same; your advice would be greatly appreciatedhare your information.
Thx,
Karthik

I finally fixed it. I did a fresh installation on an windows XP machine and installed the 710 gui (patch level 601) and the pre-calc server.
On which the old error went away and I got a new error on broadcasting 7.0 workbooks (3x ones were successfull) :
|Type|Date      |Message text                                                                                |LTxt|Time    |
|    |08/13/2008|Processing setting ZZTST_WBOOK_BCAST_70                                                              |    |16:00:25|
|    |08/13/2008|Precalculation server was started                                                                    |    |16:00:25|
|    |08/13/2008|Message: Registration to 10.128.200.30/sapgw01 suc                                                   |    |16:00:40|
|    |08/13/2008|ceeded.                                                                                |    |16:00:40|
|    |08/13/2008|Version: 7100.1.601.35                                                                               |    |16:00:40|
|    |08/13/2008|Connection passed                                                                                |    |16:00:40|
|    |08/13/2008|Load workbook EPHA2OKV9VZ2ZB74OTEFAS281                                                              |    |16:00:40|
|    |08/13/2008|Start precalculation against RFC server SWPHXTEST3                                                   |    |16:00:40|
|    |08/13/2008|Message: Registration to 10.128.200.30/sapgw01 suc                                                   |    |16:00:40|
|    |08/13/2008|ceeded.                                                                                |    |16:00:40|
|    |08/13/2008|Version: 7100.1.601.35                                                                               |    |16:00:40|
|    |08/13/2008|Connection passed                                                                                |    |16:00:40|
|    |08/13/2008|Begin MenuRefreshPrecalc                                                                             |    |16:00:40|
|    |08/13/2008|File or assembly name BExAddin, or one of its depe endencies, was not found.Failed To Create BExConne|    |16:00:40|
|    |08/13/2008|t in MenuRefreshPrecalc                                                                              |    |16:00:40|
|    |08/13/2008|Precalclulation in thread 3failed.                                                                   |    |16:00:40|
|    |08/13/2008|Cannot precalculate workbook CATS Test Workbook                                                      |    |16:00:40|
The problem was witht the bex analyser - On opening it the pre-calc server I noticed that the bex toolbar buttons were not responding (open, save etc). Found a note which talked about identical symptons and on following the note fixed the bug. After which was able to broadcast workbooks successfully.
OSS note 1121263 - BEx Analyzer 7.10: Support for Office XP.
Hope this information helps someone.
P.S : We are on SPS15.

Similar Messages

Work book error

hi,
when i am trying to change query global def after opening the work book in BEx getting a error message 'failed to load control 'rich textbox' fromrichtx32.ocx. your version of richtx32.ocx may be oudated. make sure you are using the version of the control that was provided with your application"
thanks in advance

Hello Krishna,
Goto BEX Analyzer -> Bex Explorer -> Installation check.
This will this will run a macro to check the Front End GUI installation, Excel and displays various informations.
Details marked in Yellow are warning and Red are errors.
Warning, sometime can be ignored but not errors.
You can see the following OSS Notes as well
Note 575066 - Missing files "msvcp60.dll", "msvbvm50.dll", "msvbvm60.dll"
Note 956143 - Warnings displayed by an installation check
Thanks
Chandran

Unable to install Adobe Digital Reader 3.0. Keep receiving error message "migration has stopped working" and then installation fails.

Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?

Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648)

Error message "Failed to load book because the requested resource is missing" on iPhone

I purchased 3 books in itunes to read on my iphone using ibooks. I have synced and I can see the books in my iBooks bookshelf, but when I try to open them I get an error message "Failed to load book because the requested resource is missing". I have tried opening the book again, deleting and resyncing but nothing seems to work. Any suggestions?

I was having the same probem.
I found success when I shut my iphone down all the way (press and hold power button then "slide to power off")
then started it back up. My phone was linked to my computer at the time, so it went through the sync - not sure if that is important. But, I can now read my books!
Good luck

Error After sharing work book

Hello All,
I modifed a report by adding 2 news columns from a folder(which is based on table2). I am able to genrate the work book successfully.
So i shared the same work to another user , but while user is running the report he came across an error
saying "Invallid Comination of Joins Invloving Outer Joins - table1 -> table2 (outer) ".
How can this be possible. If there is something wrong in join conditions work book should not work for me.
It is working fine in my case but its giving error when the shared user is running. Please let me know the reasons for this.
Kind Regards,
Kumar.

Hi,
I think your answer is in Tamir's reply. If disabling fan trap did not resolve your user's issue, then the report needs to be rewritten. Even if it did resolve your user's issue, the report needs to be rewritten.
It would be difficult for us in this forum to help you to do this.
However, things to look for: How are your folders constructed? One folder, one table? One folder, many tables as in custom folder or database view? If you are joining folders together in the report where any or all of the folders are constructed with many tables included in them, you run the danger of hitting the fantrap issue - especially, if outer joins abound. Try flowcharting your report and see what that tells you. In Discoverer Plus, choose Sheet \ Show SQL\ copy the sql and place in your favorite sql tool. I suspect the answer to your issue will become obvious then.
Regards,
Nancy

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Work book migration problem : error in graph

Hi all,
I have a work book ,created in 3.x ...now we are on 7.0 So when iam migrating i got error .
I have resolved other errors..but one error is remained , problem with the graph....
on X axis with values it is showing header row also..how can i avoid header row...? to not display in graph....
As data table source controlled by BI so ia mnotable to maintain range for graph....
Problem is when it is with out scalling factors it is displaying correctly in graph also..
When iam selecting option to display scalling factor it is showing header row also in graph... coz of that graph was showing wrong data...
cal day    Quantity
above is with out scalling factor display..everything correct
blank     Quantity
cal day       KG
When iam selecting scalling factor sys will add one more row to display... this is the problem sys did not set automaticaly to consider or to leave first 2 rows...
How can resolve...? In 3.X it is working fine...... (There is no macro )
Thanks
BK
Edited by: BK BI on Jun 8, 2010 8:56 AM

Hi,
Go to the workbook in development system. Find out the technical name of the workbook ( in query designer you wil find in properties).
Copy it and go to the production system. Assign it to the required role you want. It will be visible in the perticular role in production.
I would still suggest if possible transport the role from dev to prod. (to keep all systems in line with each other)
Hope this helps.
Regards,
Viren

Work book save error in SAP business objects in bi platform

Hi,
We are facing issue for saving workbook in SAP Business objects in bi platform.
While saving work book it's asking user id and passowrd and webservice URL. after entering this it's asking to enter proxy user and passowrd.
Please suggest what is the proxy id and password we need to give here or any configuration we need to do to connect workbook with sap business objects.
Error: Proxy error 407 and Authorization failure.
##Screen shot attached##
Thanks & Regards,
Sreekanth Reddy

Atul,
Check if you are able to login into Manage Servers through Central Configuration Manager.
If thats successful, the issue is either with Krb5.ini or bscLogin.conf file.
You can check http://service.sap.com/sap/support/notes/1631734 and download the white paper to go through the settings.
Make sure there are no white spaces in Krb5.ini and the format is correct.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Compile Apps schema got errored out FAILED: file adinvset.pls on worker 1

Hi All,
While compiling the apps schema through adadmin i got the below error message
FAILED: file adinvset.pls on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
i checked the worker log file below is the error message from worker log file:
Time when worker started job: Wed Mar 24 2010 18:11:45
Start time for file is: Wed Mar 24 2010 18:11:45
sqlplus -s APPS/***** @/u04/appldev/devappl/ad/11.5.0/admin/sql/adinvset.pls &systempwd 16 0 FALSE FALSE
Arguments are:
SYSTEM_password = *****, Total_workers = 16
Logical_worker_num = 0, Is_incremental = FALSE
Load_without_compile = FALSE
ERROR:
ORA-01017: invalid username/password; logon denied
but we did not changed the apps password,i am able to connect both apps and system at sqlplus with out any issue,before running the adadmin all environment variables are set.
Please advice,

Hi,
for password managment policy for the sys and system users for auditing purpose.
So we can not put the restriction for the sys and system users passwords containd atleast one alphabit,one number and one special charecter?You cannot, and according to the MOS document there is no workaround. You can simply change the system and sys passwords for now (with no special characters), and apply the patch then change the passwords back.
You could also log a SR to confirm with Oracle support if there are any workaround which is not published for public access.
Regards,
Hussein

My book from iPhoto failed (error box) after 2h. 25m. download process

My book from iPhoto failed (error box) after 2h. 25m. download process.
I'm afraid to start the download process again without knowing why it had an error the first time.
What should I do?

Thank for the information
Unfortunately, even if I delete iPhoto 1.1.1 from my hard rive I still receive the same error when I attempt to install 2.0, You cannot continue. There is nothing to install.
I did notice that the installation dialogue seems to be correct with the exception that I am not prompted to type in an administrative password (although I am currently logged in as an administrator).
Is there something I am missing?

Internal error: assertion failed - still won't work in LR4

When I try to export an image from LR4 I get the "internal error: assertion failed" error. I'm running Lion 10.7.3 on a MacBook.
I started by reading the thread at:
Re: "internal error: assertion failed" when exporting via LR4
tinaTS offered what she thought was the correct fix but her suggestion didn't apply to my situation. She suggested moving user presets but I don't have any to move.
I also tried the basic “repair permissions” and Lion restart with no luck.
Kirk Marcus suggested removing the com.adobe.Lightroom4.plist from my library. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried removing all files that began with com.adobe.Lightroom and then creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.
Obviously, the program is worthless to me if I can't export images.
Additional suggestions would be appreciated. I see that lots of people on the internet are having this problem but none of the suggestions I've found so far have been of any help.

Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.

Error: "install failed mac os x could not be installed on your computer"

Wanted to post an error I repeatedly got in case anyone else out there has the same issue. Went to do a snowleopard (10.6) upgrade and clean install on a mac pro (coming from 10.5). After about the "26 minutes left" mark I repeatedly got the following error:
"install failed mac os x could not be installed on your computer
the installer could not copy the necessary support files
click restart to restart your computer and try installing again"
i searched a bunch for this and could not find any definitive answers or help.
the log file was very vague, referring to errors writing package(s).
at first i thought it was a bad DVD drive as it was making a bunch of noise and taking a long time to boot. So i went and purchased a new DVD drive and successfully installed it. nope, same issue. then i pulled out all of my 3rd party RAM. nope. then i tried swapping the RAM into different configurations, nope.
after many many hours of various methods and re-partitioning, etc, just for the heck of it i replaced the harddrive, and it worked!
So, for those of you out there who get this error, try troubleshooting your hardware, try swapping your harddrive.

You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

Work book Broadcasting Issue

Hi Experts,
I have got A pre Calculation server installed in one of my XP Machines. The pre calculation server is functioning properly.
One problem I am facing here is when on the same pre calculation server when I schedule or Direct Broadcasting is done
in Production server the output comes as junk. As we all must have seen in excel when the work book is created in the
higher version of excel and opened in lower version it opens as junk. it is opening is the same fashion
but
in Development server the output is proper.
The best part is that in both the servers the same Pre calculation server is used.
Pl put some light on this
Thanks
Shivani

Hello Shivani,
- Please check that the workbook being broadcast opens & refreshes ok on the precalculation server.
- Ensure that the precalculation server is patched to the same or higher level then Analyzer.
- In any case, please test the latest FEPs for Analyzer & Precalculation.
> BW 7.x precalculation service SP1300 - GUI 7.10 (note 1413028). All download info & installation instructions can be found
     in the same note. The installation guide is also attached to the same note. **Note, in the precalculation service please
     maintain the user with windows system administration rights instead of the local system account user as mentioned in the
     installation guide on page 13.
> BW 3.x Add-On Front-End SP10 (see note 1413154)
> BW 7.x Add-On Front-end SP1300 (see note 1413030)
> SAP GUI patch 18
Thanks,
Michael

Upgrade Error - DBConnect fails EC 00256

Hi,
      the upgrade from 4.6c to Ecc6 failed at step StartSap_Dual with following error
System start failed code - 2
- 2 the test rfc did not work
try to login in with the ddic user. this error shows up on the upgrade screen.
we are using
Windows 2000 sp3,oracle 9.02,kernel 700 patch 102
wen manually tried to connect using management console it gives the error DBConnect fails Ec 00256
The DB log mode is now changed to Archive log mode.\
Kindly help if this is a known issue
thanks
John
the dev_w0 log is shown below
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 01 12:03:53 2007
B create_con (con_name=R/3)
B Loading DB library 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' ...
B Library 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' loaded
B Version of 'I:\usr\sap\U46\SYS\exe\run\dboraslib.dll' is "700.08", patchlevel (0.102)
B New connection 0 created
M sysno      00
M sid        U46
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    102
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        5908
M
M kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5908) [dpxxdisp.c   1301]
I
I Wed Aug 01 12:03:54 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          24344     (1432)
M DpShMCreate: sizeof(tm_adm)          4232256     (21056)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1520)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 08D10040, size: 4897456)
M DpShMCreate: allocated sys_adm at 08D10040
M DpShMCreate: allocated wp_adm at 08D11E80
M DpShMCreate: allocated tm_adm_list at 08D17D98
M DpShMCreate: allocated tm_adm at 08D17DC8
M DpShMCreate: allocated wp_ca_adm at 09121208
M DpShMCreate: allocated appc_ca_adm at 09126FC8
M DpShMCreate: allocated comm_adm at 09128F08
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 091A9DC8
M DpShMCreate: allocated gw_adm at 091A9E08
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 091A9E38
M DpShMCreate: allocated wall_adm at 091A9E40
X
X Wed Aug 01 12:03:55 2007
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host SAPUPG46
M calling db_connect ...
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C
C Wed Aug 01 12:03:56 2007
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPU46's password
C Connecting as /@U46 on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   07443638   07448CD4   0744855C
C Attaching to DB Server U46 (con_hdl=0,svchp=074484A8,srvhp=0745A0A4)
C
C Wed Aug 01 12:03:59 2007
C Starting user session (con_hdl=0,svchp=074484A8,srvhp=0745A0A4,usrhp=0747CD78)
C Now '/@U46' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => Cannot decrypt password I got from table vzxvb
[dbsloci.c    11430]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=074484A8,usrhp=0747CD78)
C Now I'm disconnected from ORACLE
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
M
M Info for wp 0
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server SAPUPG46_U46_00 on host SAPUPG46 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Wed Aug 01 12:03:59 2007
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10439
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5908) [dpnttool.c   327]

Hi John
Did you check the env variables??
Error "CLIENT_ORACLE_HOME is not set as environment variable"
Define ORACLE_HOME as <drive>:\oracle\<SID>\<oracle_version>
or CLIENT_ORACLE_HOME as <drive>:\<oracle client location>
Regards
Juan
Please reward with points if helpful

Pre-calulation of works books errors : Precalculation failed: E Path

Similar Messages

Maybe you are looking for