Pré commande iphone

Quand receverais-je mon iphone précommander depuis plusieurs jours? peut on m'expliquer pourquoi pré-commander si c'est pour le recevoir 15 jours apres sa sortie??

Bonjour...
Lorsque vous pré-commander un article, vous ne pouvez pas être en mesure de le télécharger à l'instant précis il devient disponible pour achat régulier. Vous recevrez un e-mail le jour même elle devient disponible pour vous laisser savoir quand vous pouvez télécharger l'articlem.

Similar Messages

  • Mercedes command + iPhone 4 = audio streaming?

    Hi there apple,
    I was just wondering about streaming audio over bluetooth to mercedes and I couldn't find any good solution for that. I've got Mercedes-Benz SL with NTG 2.5 and iPhone 4 with iOS 4.3.3. Since iPhone bluetooth authentication on mercedes is not a big deal Im wondering is there any "normal" way to provide iPod music over bluetooth to mercedes audio using airplay or anything else.
    What I mean is that if I can stream phone conversation to audio why can't I stream music? Has anyone tried streaming iPod audio to mercedes car?
    Regards,

    Nope, but i noticed few cool things. Well first of all if I use voice notes in car connected to MB via bluetooth, it ueses Mercedes microphone and Mercedes speakers. It works the same for some applications like teamspeak3 app from appstore. It works automaticly and it's convenient!
    But I still don't understand why can't I stream music that way?

  • My Iphone 5s blank screen and can hear voice command when i press the home button

    My Iphone 5s was coming up with voice command and driving me nuts. After trying  to reset the phone now I just have a blank screen.  when i goes to restart the apple icon will show then the voice command  lady will talk in the back ground but still no screen.
    Any help please

    Try one of these 4Rs toubleshooting steps:
    Restart:
    1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
    2. Press and hold the Sleep/Wake button until the Apple logo appears.
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Landrover Evoque and Voice Commands - iOS 7 / iPhone 5S problems

    I have a Landrover Evoque which has Voice Controls.
    I also have iOS 7.0.3 and the iPhone 5S.
    Before the upgrade to phone and iOS the voice controls worked fine in that it could call a contact based upon voice recognition in the car.
    All worked fine until the new software upgrade.
    However, if I press the Voice Command button and say 'Phone Call Contact" it returns a response "No Handset Connected" and fails.
    However the phone is connected via Bluetooth and ALL of the contacts have been downloaded to the car address book.
    Anybody else have this?
    Anybody know of a fix?
    In case anybody asks - the Bluetooth has paired ok, mad it will make and receive calls - it also will play the music through the Bluetooth.
    However this is now more unsafe than it was before.

    No.
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    or on your phone settings - general - reset - reset network settings - you will have to re enter password for known wifi.

  • How do I use the command "F" function in Numbers on my iPhone or iPad?

    When I use Numbers on my MacBook Pro I just hit command F and can search for a word then it will tell me exactly which line number that word is on. I want to be able to do in the numbers App on my iPhone or iPad?
    Thanks!

    Obviously iOS does not have F keys, so that is out. Tap on the Tools icon (wrench; upper right), then tap Find. Tap search on teh keyboard to move to the next instance.

  • Bought my 1st iPhone today (4S)  Just started using for less than 5 minutes and it has a voice command that talks on Everything and the pages wont scroll up and down and cant change screens from the page it boots on.  Wrong apps open when I open an app...

    So I bought my wife our 1st iPhone 4S today w/ Verizon.  I booted it up and it started having a voice repeat every command, and function (no, its not Siri).
    BTW...  Siri doesn't work, I can't scroll in the settings, when I open an app it actually opens the wrong app, and I can't find a way do fix any of it.  I tried a hard boot by holding down the power button and the button on the lower midddle of the phone.  When it rebooted, it got worse.  Now what?
    Not too excited about switching phones if this has already begun...  Any advice would be appreciated.

    iPhone User Guide
    Voice Over Fix
    Settings > General > Accessibility > Voice Over > Off
    Or
    Press the Home Button 3 Times
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

  • Is there a way to turn on/off 3G for iPhone 4S with a voice command and/or without Siri?

    For example, I almost always have 3G turned off on my iPhone 4S so that I won't use any of my cellular data when not needed. However, when I'm driving, and I need to use Maps for directions, it would be nice to unlock the iPhone by voicing my PIN and using a voice command to turn on 3G and accessing Maps.
    Is there already a way to do this? I know that accessing applications via Siri will be capable when iOS 6 is released.
    Voice Control should also be set to the default voice-command option when Siri is either off or when the iPhone does not currently have access to the internet. Because Siri requires the internet, Voice Control could be used to unlock the iPhone and turn on 3G. Once 3G is turned on, Siri can take over (if Siri is turned on in Settings) to access an application, like Maps. When finished, there should be a voice command that will "turn off 3G."
    So, here's how the whole process could work:
    1) hold Home button to access Voice Control and respond with PIN to unlock the iPhone - "one, two, three, four" or "twelve, thirty-four" for PIN 1234 (I'm not sure if people would want to say, "one thousand, two-hundred, thirty-four")
    2) once unlocked, it should intuitively stay on Voice Control so the user can say "turn on 3G"
    3) if Siri is enabled, it will take over Voice Control; if Siri is disabled, Voice Control will remain active, bu you should also have the voice-command option to "turn on Siri" (now that 3G is on)
    4) a voice command to "launch Maps" - I know that this will capable with iOS 6
    5) when done, hold Home button and voice a command to "turn off 3G" via Siri
    Could this feature please be integrated into iOS 6?
    In terms of driving and accessing Maps, this would be a lot safer and a lot easier.
    Thanks!

    Tell Apple:
    http://www.apple.com/feedback/iphone.html
    We're all users here, just like you.

  • I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

    i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

    Did you enable Siri in settings?
    Settings > General > Siri > ON
    If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

  • My iPhone was stolen and the phone is powered off. Is there anyway to command it to turn on so I can use the "Find my iPhone" app to track the location?

    My iPhone 4S was stolen a few days ago, and I was able to track the location with the "Find my iPhone" app. I had it play a sound which alarmed the thief, so they powered the phone off. They have not turned it on for four days now. Is there any way I can command it to power on or anything my service provider (Verizon) can do? Any suggestions will help! Not sure what they are going to do with it since a) they have not turned it on and b) it has a passcode and won't be able to be unlocked.

    If it was stolen the thief will wipe it with the result that you will not be able to track it.
    Contact your carrier.  They may be able to block further use of the phone.  No good to you but then no good to the thief either.

  • Is it possible to take images, videos, send messages or make a call in iphone,through voice command. when it is off mode?

    Hi Everyone
    In one of my coming project, we need to implement taking images, videos, sending SMS and make a call through voice commands in iphone, especially when Iphone is Off mode.I'm new to IOS development. I don't have clear about this concept,If any have any resource related to this topic. Please share there ideas or thoughts.
    Thank you

    Ravindra Kishan wrote:
    especially when Iphone is Off mode.
    What do you mean by "Off mode"? Do you mean the phone is turned "off"? If so, you can't do anything with any iPhone, other than look at it, if it's turned off. Off on an iPhone is off...nothing works.

  • Ios 5 possible firmware bug for iPhone 4; Voice command/text-to-speech doesn't work properly.

    I upgraded an AT&T and Verizon iPhone 4 to the ios 5 firmware, and I am having the same exact issues for both phones.  When using the voice command a few times, the audio voice does not come through the "speaker" (referring to the speaker located at the bottom of the phone).  Instead, the audio voice goes through the receiver which is on the front face of the phone, on the right of the camera.
    For example, say you want to use the voice command to dial a phone number.  You would enable voice command by depressing and holding down the "Home" button and give the command "dial...1-800-452-3456", the phone would then repeat the phone number back to you through the "speaker".  However, when I did this a few times, the voice instantly goes to the receiver instead.  I found no way to fix this problem.  I tried the following and none of these solutions worked:
    Turned the phone off and back on again
    Hard reset (held down the Home and Lock button for 10 seconds)
    Restored the phone, and set the phone up as a "new iPhone" instead of restoring from back up
    After trying to restore both iPhones and still have the same issue, I made an appointment to visit Apple.  I took the Verizon iPhone 4 to Apple, and the employees handed over a refurbished iphone in hopes to solve this issue.  However, this refurbished phone still had the same exact issue. 

    Of course I checked my apps library and found nothing. However I'm looking at the status while sync is processing, I'm 100% sure that app is not synced to my iTunes library
    Yep, I can always manually "transfer purchases" to my iTunes library. But this is not the point. On my old iPhone 4 and new iPad (3rd gen), it will sync all newly installed apps from my iOS devices to my iTunes library, no need to click "Transfer Purchases" again.

  • IPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but no longer synchs my contacts?

    My iPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but now it longer synchs my contacts - how do I get my contacts downloaded to the command system of my car?

    status update -- I tried a lot of other things but finally solved the problem after I removed all the groups from mac address book. (thank-you to my son Ben)
    FYI -- along the way I tried doing the reset sync history, which deleted all contacts from the iphone. I initially thought that was a good thing, until I discovered that nothing I tried after that would put the contacts back on the iphone. Next I restored factory settings on the iphone and set up as a new user, but that didn't work either. Or maybe it did; maybe deleting the groups wouldn't have solved the problem if I hadn't deleted all contacts and reset the iphone first.

  • My 2 month old Iphone is losing it's mind.  It's randomly turning on Voice Command and calling people or turning on the IPod.  It freezes up and won't let me go back to the home screen.

    My 2 month old IPhone started randomly turning on Voice Command and calls people and turns on the IPod.  It freezes up and won't let me push the home button.  Any suggestions?

    OK, I reset it several times and it worked fine all day yesterday.  Today when I turned on the bluetooth it went back to the same problem.  Voice Control comes on and the home button won't work at all.  I have gone through the reset many times and it isn't working.  How do I restore firmware as you suggested? 

  • Is it possible to cancel a remote erase command set in the Find my iPhone app?

    I have recently been reunited with my 17" MacBook Pro by the police after it was lost.
    To cut a long story short I initiated the "erase mac" element as I thought I wouldnt be seeing my MacBook again.
    Sooooo........... now having the computer in my possession again, I d like to know if there is anyway that I can either:
         1. Stop the erase command from initiating?
    or
         2. Recover the relatively small amount of information that has not been backed up (due to travelling) possibly by
              turning my network connection off and taking off before connecting to the internet again?
    I ve contacted Apple Support and they have advised that (1) is not possible as far as they (the operator spoken with)
    are concerned, but (2) was a very good question that they have had no training on or information available about.
    As such, thought I would ask the Guru's here to see what are the possibilities, or have I just got to bite the bullet and
    accept the losses?
    I wondered if the erase command can be sent via an unauthorised network connection such as when wifi looks up what
    networks are available??
    I ve not turned the MBP on since getting it back and am assuming, as there is no notification from the Find my iPhone app
    that it has been located that way, that it has not had network access if it has been turned on at any time since I activated
    the locate and erase facility.
    Many thanks for you kind attention and hopefully positive response.   :-)
    Kind regards
    Bob

    There is one way you can try... it should work in theory. It's called Target Disk Mode. What this does is that you have to connect your computer to another Mac and your computer will show up on the other Mac as an external hard drive. You can then transfer everything to the other Mac.
    Here is where its going to get complicated. You would need another Mac. Since you said your MacBook Pro is a 17" then you still have the old FireWire ports. You need to find out what kind of FireWire port it is (400 or 800). Get a FireWire cable (it's going to be hard nowadays but try Amazon, eBay, Newegg). You might need a FireWire to Thunderbolt converter is the other Mac only has Thunderbolt ports.
    Once you plugged the computers in with the right cable. Turn the other computer on first then turn yours on with the "T" key down. That will enable Target Disk Mode. (http://support.apple.com/kb/PH10725)

Maybe you are looking for

  • Deskjet 3050 wireless connection trauma

    Hi, my Deskjet 3050 has stopped working over the wireless network and I'm stumped. It was working fine, but has now stopped. My laptop is connected to the home router (BT) and the printer is also connected to the same router (according to the router

  • New iPod Touch will not pair with New Resound Linx hearing aid

    Greetings Received a new pair of hearing aids aweek ago,  Resound Linx.  Very nice indeed. Days after I purchase a New iPod Touch, down loaded all updates and the Resound Smart app. Followed instructions to the letter but am unable to pair the hearin

  • No Apps icon showing in CC desktop app(Creative Cloud download)

    Proceeding from a downloaded file to Adobe Creative, execute open file, file registers empty Confused

  • Continuation of Field Shift Question

    This is a continuation of my previous question which was answered.  Using the rect property, I am able to move a field horizontally or vertically based on the value of a radio button (yes/no).  If Yes, I want to shift a specific field down.  If No, I

  • Office365 incorrectly labeling my mail as Bulk Mail/ spam

    At my office, we send about 5k transactional emails per day. Our email provider shows us has having an excellent reputation with top 10% open and click rates.  However, last week Office365 started labeling our email as spam. Specifically, it is label