Pre-compile for the interactiveform in AP server

Dear all,
My dynpro application has a function for outputing a PDF document in the new form.
When first creating, it takes time too long until timeout.
However, after first time creating, every thing works fine.
Can anyone has any suggestion for this problem......
Thank you for your help in advanced.
Best Regards,
Philip Chen

I believe you are the other end of the conversation I've been having with user589812. Please see my entry about using the 10gR2 compiler instead of the 10gR1
Re: how to migrate oracle form application to new web server

Similar Messages

Pre-compile for the web dynpro project

Dear all,
My web dynpro project has a interactiveform.
Every FIRST time interactiveform loading, it always until timeout.
However, after first time execution, everything works fine.
Can any one have any suggestion for solving this problem?
Thankx in advance.
Best Regards,
Philip Chen

Hi Krishna,
If you have Installed NWDS Successfully& configured WAS, you can start with development of sample applications.
Just refer this Links :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/webdynpro/how%20to%20build%20a%20web%20dynpro%20application.pdf - How to create WebDynPro Application ?
Why WebDynpro ? Why WebDynpro ?
Why webdynpro and not BSP or JSP? Why webdynpro and not BSP or JSP?
BSP to WEB Dynpro BSP to WEB Dynpro
Benifits of using Webdynpro Benifits of using Webdynpro
Java vs. ABAP Java vs. ABAP
regarding Java related webdynpro regarding Java related webdynpro
Web Dynpro vs. Struts - a few questions Web Dynpro vs. Struts - a few questions
What kind of applications are being developed with Web Dynpro? What kind of applications are being developed with Web Dynpro?
Check this:
http://www.sappro.com/downloads/OptionComparison.pdf

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

Java compiler for the mac

Can anyone tell me where i can get an compiler for the mac os x?

if you have downloaded the latest java release from apple (using the update module) you should have java 1.5 by now... On a mac you can compile using the terminal...
voyx

I had my iPhone 5 shipped to my school, where it will end up in the mail room. Should I pre-sign for the delivery?

I had my iPhone 5 shipped to my school, where it will end up in the mail room. Should I pre-sign for the delivery?

No

When I try to move messages to trash I get this The IMAP command "CHECK" failed for the mailbox "INBOX" with server error: Error in IMAP command received by server.. what do I do ?

I try to move emails into the trash and this message comes up;
The IMAP command “CHECK” failed for the mailbox “INBOX” with server error: Error in IMAP command received by server..
what should I do ?
My trash is empty and I re booted etc...

Back up all data. Rebuild the mailbox. Try again to delete the message.

Mac mail - SSL option for the SMTP outgoing mail server - Help!

Mac mail (Version 6.3 (1503)) will not let me "uncheck" the SSL option for the SMTP outgoing mail server - Help!
Thanks!

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

When deleting emails i get the following error message at times ...The IMAP command "UID COPY" (to Deleted) failed for the mailbox "INBOX" with server error: Error 9. Server error. Please try again later..

When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..

Please complete or update your system profile so the users here can properly help you.
Which email client are you using?

Ntop pre-compiled for Snow Leopard?

I was looking for a network traffic monitor and found ntop promising. Unfortunately the 3.2 version -the only binary version I found for Mac- is too old and does not work on Snow Leopard. I have tried to compile ntop 3.3.10 but without success (libraries missing even if Xcode installed, etc.). Does anyone know where I can find a decent ntop version pre-compiled and fully working on SL?

If you're brave, MacPorts has a later version of ntop. It requires installing MacPorts and all its associated cruft, thought.
(IMHO a better solution would be to find what those dependencies are and get a local build working. Given the nature of ntop there are some significant dependencies so it might take a little time but you'd certainly learn from the experience. )

How to install XI and the Pre-requisties for the same?

Hi !
I want to install XI in my system. Can anyone tell me what are the prerequisties before installing XI and also the installation procedures ..
Thnx,
Laawanya

Hi,
as with follow this steps
1. WINDOWS OS (PREFERABLY 2003 SERVER) ENTERPRISE SERVER WITH SUPPORT PACK 1
2. INSTALL THE NECESSARY APPLICATIONS SUCH AS MS-OFFICE, WINZIP ETC..
3. IF IT IS A STANDALONE SYSTEM U NEED TO CONFIGURE THE MICROSOFT LOOP BACK ADAPTER AS THE SAME SYSTEM SHOULD ACT AS BOTH CLIENT AND SERVER..
So for this go to control panel click ADD NEW HARDWARE , there choose new hardware and click the radio button of install new hardware, and choose manually the Network Adapter there goto Microsoft LoopBack Adapter *
4. GO TO THE RUN IN WINDOWS TYPE AS DRIVERS THERE U FIND THE DIRECTORY OF *ETC * AND FROM THERE GO TO HOSTS AND SPECIFY THE STATIC IP ADDRESS WHICH WAS CREATED IN THE ABOVE STEP AND SPECIFY THE NAME OF THE MACHINE AS SAP TRANSHOST IF IT IS A STAND ALONE SYSTEM.
ipaddress Name of the Machine(SAP TRANSHOST) ==> this must be defined in the hosts file..
5. NOW SET THE VIRTUAL PAGE REPLACEMENTS BASED ON THE RAM SIZE USED IN YOUR MACHINE THE BASIC LOGIC IS 3 TIMES MORE THAN THE ACTUAL RAM SIZE.
*Eg: for 1GB --- 1024 * 3 so, the initial set was 3072*
to configure this right click MY COMPUTER go to ADVANCED there again go to ADVANCED and u find the SETTINGS there u choose the Advanced there u can see the INITIAL SET specify the value based on the RAM SIZE
6. INSTALL JAVA * J2SDK1_4_14 * CREATE THE CLASS PATH FOR THE JAVA ..
To configure this right click MY COMPUTER goto ENVIRONMENT VARIABLES there create a class path, by choosing New
Here choose Java Variable as JAVA_HOME and Java Value as PATH OF THE BIN FILE OF INSTALLED JAVA
7. INSTALL ORACLE 10 G i.e Oracle patches need to be installed.
8. Take the BACKUPS of the CDs or DVDs in your hard disk, and the partition of the hard disk make work area to 100 GB and the dump area remaining, Now from the dump area backup go to the SAP Product --- Installatiion Master --- SAPINST.EXE
when u come to the servers part, it is quite differient when compared with XI3.0 and PI7.0 and at the same time in PI we have a provision of installing the both java and abap as central instance and when u see in XI3.0 u need to sepatrately configure for both java and ABAP, as a whole in concern we dont see separately in the servers part..
Here choose the components of Netweaver which u require while configuring the receivers part..
Deploy the ADAPTERS by importing the XI7_0_SAP_BASIS_7.00_10_00.tpz
9. To add support pack TCODE was SPAM (SAP Support Pack Manager).,
10. To Create a new Client use TCODE as SCC4
11. Check the Tcode-- SICK ( It Shows whether any dependent objects are not consistently installed)
12. Finally download the SAP BASIS component in the IR..
for SLD Configuration...
SLD can be classified into 2 as
1. Software Catalog
2. System Catalog
Software catalog consists with Products and Software Components.
If u know Ms-Office we can understand better, Ms-Office is an Product in which Ms-Word and Ms-Excel and others are the components of the Ms-Office product in similar any object created in XI should store under any software component so we require a Software Component and at the same time this Software Components should be under Products, so we are creating products the hierarchy will be like this for software catalog
PRODUCTS -
>>> SOFTWARE COMPONENTS -
>> NAMESPACES CREATED DURING DESIGN -
> OBJECTS
System Catalog consists with Techinal System and Business System
Technical System is the physical entity but where as the Business System is the logical system of the Technical System..
i.e an n number of business systems are created for a singel Technical system.
Basically while developing the scenarios it is difficult to share the technical system so we develop instance of the technical system i,e a logical system.
feel free to post any queries regarding installation..
regards,
Kishore

Set Port to be used by client orb corba for the response to a server

I have a client corba application, and i need to set the port used for corba response on the client host.
How can i set the port used on client for response?
Client Server
<ClientHost>?port?--------------------->4444<serverHost>
Thanks

You mean the local port at the client. It's used for the entire connection, not just the response. You should let the system allocate this rather than trying to control it yourself. Otherwise you restrict yourself to only one connection to the ORB from the client (e.g. no multithreading).
You should arrange with your firewall to allow anyclient port to connect to the ORB.

How does porting work with pre-ordering for the iPhone 5?

I am currently a T-mobile customer with two lines, one for my wife and one for myself. We want to pre-order the iPhone 5 and become Verizon customers. Do I just pre-order the phones and then port our numbers over after we have received them? I guess what I am asking is, do I need to give Verizon any kind of heads up when we pre-order that we will want to port numbers, or can I just take care of all of that once the phones arrive?
I know I have to keep my T-mobile account active until the numbers are ported, so I will definitely being doing that.

That's a great question jimlittle! First, let me express our excitement to have you join the VZW family! I'm sure you're going to love your new phone and service.
The best way to pre-order your iPhone 5, is with the request to port-in your numbers from your current carrier. Here is the link to start your pre-order: http://bit.ly/RRkIKx After every option, select "Next" (top of screen). After you select your device(s), plan(s), and accessories, you will be asked if you want a new number, or if you want to transfer current numbers. If you transfer number, you will be asked for the number you want to transfer, current account number, PIN or password, owner's name, number to be reached, and full address. (Therefore, you will need all that when ordering.) The numbers will be ported over once you receive the phones, and they are activated. Until then, they will not be disconnected from your current carrier.
I trust this information is helpful.
Thank you,
VanessaS_VZWSupport
Follow us on Twitter @VZWSupport

Problem compiling for the intel platform

I have an EMac that is a PPC. I have XCode 2.3. If I change my Architecture to i386, it seems I have a problem with gcc 3.3.
I get the following error:
gcc-3.3: installation problem, cannot exec "ccplus": No such file or directory.
I have looked for the apple version of the gcc compiler standalone, but I can not find it.

It sounds like you're using gcc 3.3 to compile your program. You have to use gcc 4 to build for Intel. Your problem is a little surprising since Xcode 2 uses gcc 4 by default.
To tell Xcode to build your Intel code with gcc 4, you must add the build setting GCCVERSIONi386. Give this setting the value 4.0, and Xcode will use gcc 4 to build the Intel version of your program.
Mac OS X (10.4)

How do I pick the right settings in PrE 10 for the videos I have?

I have Adobe Premiere Elements 10 and want to edit videos that I had received from a company that transferred my Super 8 home videos to digital format and saved them on an external hard drive. They have avi file extension, Apple Motion JPEG A codec , frame size: 1920 x 1080, pixel aspect ratio: 16:9, Frames per second: 29.97. I am not sure what settings to select for the best picture quality. I have tried some and the quality is poor. I need help. Thanks

Editer,
You HAVE found the right forum, and John and Steve are on the problem.
Now, with MJPEG footage, I normally recommend this ARTICLE (from the Tips & Tricks sub-forum), but you have a slightly unique problem, in that your footage contains a specific CODEC, the Apple Motion JPEG CODEC.
Are you on a Mac, or a PC?
I do not know if installation of Apple's QT Player also adds the Apple MJPEG CODEC, as it does Apple's H.264 CODEC, and a few more. If it does, then you should have the proper CODEC. I also do not know if Mac's come with Apple's MJPEG CODEC installed. Others will have to answer those questions. I have four MJPEG CODEC's on my PC laptop. One was the MainConcept, that I bought, one installed with my wife's Canon G-10, one installed with her Lumix, and then there is another, that was probably installed from elsewhere. None of mine (I have Apple's QT Pro on the laptop) show up as being from Apple, but that last one might well be
I can edit MJPEG material pretty smoothly (not as smoothly as SD DV-AVI, but still pretty well).
Good luck,
Hunt
PS - for telecine work, I have had the 8mm/S-8mm footage digitized to miniDV tape (harder to find telecine houses, that do that now), and just use my Canon video camera, to Capture those tapes over FireWire into Premiere. That works fine.

How to include header name for the fields in application server

Hiiii Experts,
                      LOOP AT fp_i_wwcmp INTO fp_wa_wwcmp.
      CONCATENATE fp_wa_wwcmp-pernr
                   fp_wa_wwcmp-etype
                   fp_wa_wwcmp-maxbt
                   fp_wa_wwcmp-epayperiod
                   fp_wa_wwcmp-currencyid
                   INTO l_v_data SEPARATED BY l_v_char_tab.
i need to insert header names for etype,maxbt,epayperiod,currencyid which are needed to be transfer to application server.
regards,
kasyap
Edited by: Harish Kasyap on Sep 18, 2009 2:49 PM

hiiiii clemens thanks a lot for ur reply,
                                                           this is not an alv report,the output is directly transfered into application server AL11.
and i have used this statement
CONCATENATE 'ID'
                'EpayType'
                'EpayAmount'
                'EpayPeriod'
                'CurrencyID'
                   INTO l_v_data SEPARATED BY l_v_char_tab.
transfer l_V_data.
is this the rite one
regards,
kasyap

Pre-compile for the interactiveform in AP server

Similar Messages

Maybe you are looking for