Pre-configured Roles
Hello,
is there any summery of all the pre-configured Roles with its Role_ID and a description of each role?
Best Regards,
Sandra
Hi Sandra,
You should have a look <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f6/26057105fd11d7b84200047582c9f7/content.htm">here</a>, this should answer your question.
Hope this help
Vincent
Similar Messages
-
Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any alias Airwatch svc-http permit
any alias Airwatch svc-https permit
ip access-list session Google-Play-Store
any alias Google-Play any permit
ip access-list session BlackBerry-Access
any alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence! Thanks,Chris
-
hi all,
i am doing pre configuration of abap client proxies by refering this blog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
here i am unable to create HTTP connection in the business system.
i got ICM_HTTP_CONNECTION_FAILED error
regards
sandeep.ABAP Proxy:
How to enable the ABAP Proxy between the ECC and SAP XI.
The Errors I have divided into 2 parts
1. If my proxy is looking into the Exchange Profile on SLD.
2. If the Proxy is looking into the SPROXSET table
If my proxy is looking into the Exchange Profile on SLD:
Description: Proxy are the outside in communication between the SAP R/3 and SAP XI, proxy cab be used when my SAP WebAS is 6.20, it is an adapter less communication, because the the Application system has the WebAS 6.20 has an internal engine which will convert the message into XML and then this XML message is sent to XI using the HTTP protocol.
This blog explains how to create the ABAP proxy:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
What I am trying to focus is how the connection is getting established and what all happens when you run the SPROXY transaction code on Application System.
We use SPROXY to read the Interfaces from Integration Repository in application system, then we are creating the proxy either client or server.
When we run SPROXY the application system will try to find the the IR to get the interfaces on which the PROXY can be generated.
It gets the information about the IR in Exchange Profile which is present in the SLD of XI.
When SPROXY is run on the application system, the following program will be running.
Report: SPROX_CHECK_IFR_ADDRESS check if the connection to the exchange profile is working and the parameters are set.
Report: SPROX_CHECK_HTTP_COMMUNICATION check if the HTTP communication of the system is running.
Report: SPROX_CHECK_IFR_RESPONSE checks if the connection to the Integreation builder is running correclty
Report: SPROX_CHECK_IFR_CONNECTION checks if the data coming from the Integreation Builder can be correclty interpreted.
If you get any error while running the reports here are the descriptions:
Firstly check the SLDCHECK is working:
Since the applications communicate with the SLD to get their own business system and integration server information the connection to the SLD need to be running from all business systems. Use the transaction SLDCHECK to check whether this is the case. If SLDCHECK is throwing the error then cross check the SLDAPICUST transaction code whether is pointing to the correct SLD.
Report: SPROX_CHECK_IFR_CONNECTION checks if the data coming from the Integreation Builder can be correclty interpreted. You will get the error "Integreation Builder data cannot be understood when you run the report SPROX_CHECK_IFR_CONNECTION.
Make sure the following steps are done to fix this:
Role of the Business system: Application System
Corresponding Integreation server: dest:
<SM59 Http connection created>
Also check the following RFC are working fine.
LCRSAPAPI
SAPSLDAPI
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
The Report SPROX_CHECK_HTTP_COMMUNICATION will check whether the application system all the HTTP services activated or not. To activate all HTTP services go to SICF and activate it.
Else you will get error ICM_HTTP_CONNECTION_FAILED.
To check the HTTP service is active or not check SMICM click GOTOService
Create the HTTP connection from SAP R/3 to XI.
SM59-- Create RFC destination of type H when all the HTTP services are active then the connection will work fine.
If the RFC destination of type H is giving error ICM_HTTP_CONNECTION_FAILED and all the HTTP services are active then
Goto the SICF and make sure all the Proxy are disabled.
So once these things are maintained then the ABAP Proxy will work fine.
regards
Nisar -
With a view to packaging and deploying CS4 in Microsoft enterprise environments (ie GPO restricted desktops, mandatory user profiles, non-administrative user base, at or near minimum spec hardware) I was wondering if anyone was aware of any documentation, official or otherwise, for pre-configuration or omission of individual components within the CS4 suite in order to more specifically tailor their operation to user requirements. Eg, such as the way Adobe provide a transform generator/editor for Acrobat in its standalone form.
The instructions for performing silent installs with or without the more major components (such as Dreamweaver, Photoshop etc) work fine, and the Adobe CS4 Deployment Toolkit (aka AdobeUberInstaller) deals with a number of omissions in the base installer such ELUA and updates suppression. However there are various options within the applications themselves I would like to change the defaults for at install time (eg suppress Adobe Bridge from prompting to run at startup, address Acrobat's refusal to run until another element of the suite has been run first etc), patches I would like to slipstream rather than apply retrospectively (currently Air, Indesign, Photoshop), and some elements (such as foreign language components and 64bit support) I would ideally like to omit from the source package altogether to keep the size down - 6GB+ to 500 clients is quite an ordeal!
Web resources such as application deployment forums have allowed me to address some of the above, but I would be very interested in the feedback/experiences of this community. I appreciate what I'm asking is somewhat vague but any crumbs of wisdom all add up...
Many thanks in advance for any suggestions.
BillThe best is to get the versions in which you have developed/tested. These can be found in MAX under Software, if it is possible provide a link to the NI ftp download URL.
Then export the settings in MAX (for tasks/scales) if you use them and provide a simple app that loads these items into MAX.
For RIO I'm not totally sure but I would create 'Getting started' that outlines what settings (IP/DNS etc.) to get the user started.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
How Can I pre-configure the proxy settings in Acrobat 8?
We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?
Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.
-
How can I install a Designer 6.0 pre-configured repository ?
Hi:
I am trying to install Oracle Designer 6.0 to my client machine (Windows 2000) and server machine (Windows NT 4.0), what I did was:
[1]install Designer 6.0 client side on my client machine.
[2]install Oracle 8i Enterprise Edition (version 8.1.7) on the server machine.
[3]configured SQL*Net Client and NET8 on both client and server, and it works fine.
[4]install pre-configured repository using Oracle Designer 6.0 CD #2 (pre-configured repository),but it always gives me such info:
" You have not installed a local copy of Oracle8 Enterprise Edition, therefore, Oracle Designer and ODD D7O4 Preconfigured Repository can not be installed. Please re-install this product after the local
database has been installed."
It seems strange, I did install 8i Enterprise Edition (I even installed Oracle8 Enterprise Edition) before repository, I should have
a local database.
How should I do next ?Hi Zhu:
Now that you are trying to install Designer, your problem is easy to solve.
I think you should download Oracle Designer 6i Release 4 for Windows from http://otn.oracle.com/software/products/designer/software_index.htm and then do your install again.
The install and the server side setup maybe time consuming, but I am sure you can do it.
You may install Designer 6i Release 4 in the following steps:
(Before do these, uninstall your Designer 6.0 both from your client machine and Windows 2000 server using Oracle Installer)
Step 0: download Oracle Designer 6i Release 4 from OTN to your local directory, say c:\temp and unzip it to c:\temp\Designer6iR4. I will refer this directory as installation media. Make sure that you have equipped your server machine with at least 256MB memory. In my experience, 386MB is better and 512MB is recommended.
Step 1: make sure that one database was created in your installed Oracle 8i. If not, create a database at this step. The parameters of this database should be adjusted according the needs of Designer 6i. You will be told how to do this later.
Step 2: install Designer 6i R4 from the installation media to server machine. Pay attention at this step that you should "select to install both Designer and Repository." It is recommended that Designer should be installed to another new ORACLE_HOME. Don't install it to your Oracle database home. Say, to the ORACLE_HOME "DESDEV".
Some more words need to be said here, I think, about the ORACLE_HOME for Designer. Later if you install Oracle Developer into the same machine as Designer is installed to, both the Oracle Developer and Oracle Designer should be installed into the same ORACLE_HOME. So the name DESDEV stands for "DESigner and DEVeloper are both installed into the same Oracle home named DESDEV". This will be prompted to you just after the installation of Designer was finished.
Step 3: print out "Oracle Repository/Designer Installation Guideh from "Stat->Programs->Oracle Repository 6i Doc - DESDEV". I will refer this material as gManualh from here till the end of our talk.
Step 4: shutdown your database if it is running and then set the parameters to the correct values (required values) according to gCheck the settings in the Oracle initialization parameter fileh in the Manual, Chapter 2 Server-side installation, migration and upgrade.
Step 5: startup the database and then check the parameters. To do this, you need to login to database as user sys and then issue the command gshow parametersh. If all the parameters are correct you may go step 6. You may leave the database running.
Step 6: make sure that the database is running. If not, startup database here. Before proceed to install Designer 6i Server-side, the database should in running status.
Step 7: do the server-sidefs install of Designer 6i (that is, Repository) according to gChapter 2 Server-side installation, migration and upgradeh in Manual. In that part of manual, 17 steps of installation and setup Designer 6i server-side were mentioned. I am sure you can manage that with ease.
Step 8: install Designer 6i client-side into your client machine according to hChapter 1 Client-side installationh in Manual from the installation media.
By the way, I should tell you how much time it takes to accomplish all of these steps IF things were went smoothly: it took about 6 hours for me to have all these steps done. And my machinefs specifications is:
CPU 633MHz
RAM 512MB
Wish you good luck
null -
Unable to edit the MobileXI3BB.jad file for pre-configuration settings
According the Note:1542478 - How to pre-configure connection settings for BusinessObjects XI 3.1 Mobile clients?
We are trying to edit the MobileXI3BB.jad file to avoid the Config seeting from client side.But wonder we are not able to see the below details in our MobileXI3BB.jad:
BOBJ_MOBILE_AUTH_SERVER: <mobile server>
BOBJ_MOBILE_AUTH_PORT: <Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS: <cms address>
BOBJ_MOBILE_AUTH_METHOD: <authentication type>
Can any one help us how to solve this?
Edited by: Srikencha on Jun 3, 2011 8:58 AMHi,
you won't see this code,you need to add this code to the MobileXI3BB.jad file
BOBJ_MOBILE_AUTH_SERVER:<mobile server>
BOBJ_MOBILE_AUTH_PORT:<Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS:<cms address, for example CMSCOLPAL:6400>
BOBJ_MOBILE_AUTH_METHOD:<authentication type> where <authentication type> could be any one of these values based on your requirements: secEnterprise, secWinAD, secLDAP, secSAPR3. -
[Desktop] Pre-configured installs
Any suggestions on how to create pre-configured installers of the same base app? Here's an example of what I mean:
App: This base app connects to a configurable server domain. You could install and use this app just fine.
App for ClientX - This app should connect to serverX, and I want to pre-configure it to do so. It may also have custom configured branding for ClientX.
App for ClientY - This app should connect to serverY, etc.
So I want to be able to give ClientX an installer (or install link) that installs the App pre-configured to connect to their serverX, and I want to give ClientY an installer that connects to their serverY, but I want both to be the same application, built from the same codebase, with the same appID and certificate, and receive the same updates, etc.
I've considered using compile constants to create different AIR app versions with populated strings, which I think would work though a bit clunky, but would result in different versions of the app, when what I really want is to have the SAME version configured differently.
What I am currently doing is making a config file that can be shared, so the main app is installed then the client opens the config file with the app (file association makes this relatively easy, but still very manual feeling.) I would essentially like to automate this, so the end user only needs to run the installer.
The next step would be automating this process, so that when ClientZ purchases the app it uses ClientZ's information to provide an installer configured for ClientZ without manual human intervention. You know, for when my app inevitably gets famous and makes me rich.
Any suggestions?
Thanks all!
-AaronWell I'm not quite sure this fits your scenario but maybe (assuming your clients install your app from a website)...
You can use the swf (badge) method of installing AIR apps through the browser: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7e15. html
This would give you the ability to pass in arguments into the install process. http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a5d46-8000. html#WS5b3ccc516d4fbf351e63e3d118666ade46-7e19
Basically you set your air app to "<allowBrowserInvocation>true</allowBrowserInvocation>" and add a listener for the BrowserInvokeEvent(not InvokeEvent)
Do what you want with the parameters (maybe save to a flash shared object) to remember who it was.
Then for distribution, provide a client only page, that passes flash vars into the badge swf, which passes them to the app for install.
I recently used this method in this way. I'm building a video conference app that can send invitations via a URL (videoapp.com?id=abcdefghijklnop).. On that page I have the badge (swf) that recieves that invitation through flash vars. The badge does the install of the AIR app and passes the invitation once it runs.
Note: I had to modify the default badge.swf to include my additional flash vars.
Other than this, I dont know of any way to add arguments to just a regular passed around .air file. -
Pre-Configure QT 7 Installation for only specific file types
Is there an 'ini' or similar configuration file or command line option set I can use to pre-configure QT7 to only associate with specific file types?
I want to leave the associations for Media Player intact and have QT handle only MOV and other Apple-specific file types.Basic answer. No.
You set file associations after the install of QuickTime.
Most of it's adjustments and options are found in its Control Panel. Here you can set associations for MIME types that control the browser plug-in.
Each user can set their own values. -
Hi,
I have just started working in MDM and facing initial hiccups.
In my earlier version of MDM ie SP3 , we couldnt see the pre configured repositories(Material,Customer etc) in the MDM Console, but now we have just upgraded from SP3 to SP4 but still those repositories are missing.
I would like to know if there was something missing during installation due to which they havent been imported ????
In SP4 we have the functionality of Importing Repository thus ifa direct link to where I can find them and import them into my Console would be of great help.
Thanks in advance!!!
Regards
GauravHi Anand,
SAP delivers out of the box content for these repositories in SAP Market place.
http://service.sap.com/swdc
Entry by Application Group ->Entry by Application Group->
Support Packages and Patches->SAP NetWeaver->SAP MDM" SAP MDM 5.5-> Master Data Server->MDM BUSINESS CONTENT 5.5->#OS independent->MDMBC55004P_3-10003437.ZIP
Regards,
Fereidoon -
Pre-configured dual-boot Ubuntu and Windows
Of possible interest to the Linux folks: A newly opened Laptops with purpose store is now offering several popular ThinkPad models fully pre-configured with dual-boot Ubuntu Linux and Windows.
These systems come with a lot of pre-installed applications, see Dual boot Linux and Windows page for details.
At the moment, we are working on specific solutions for students, educators, scientists, designers...
Would love to have some feedback from the community on the existing offerings as well as suggestions/wishes for the future ones.That would be fine if some hp machines didn't have broken UEFI that don't respect setting the default OS.
-
Hello
I am trying to find out where I could download pre-configured smart forms for sales order confirmations? We are in a 4.7 system. I searched service.sap.com and could not find the download. Thanks.
JackHi,
for order conformation form
Print program : RVADOR01
you have to create smartfrom and assing this fom into NACE in Application V1
Regards,
Vijay
Edited by: vijay kumar pamulapati on Aug 19, 2009 8:19 AM -
Pre-configured standalone OC4J with PDK - ZIP corrupt - ??
zip is corrupt, what can I do, who can I contact??
pre-configured standalone OC4J with PDK
http://www.oracle.com/technology/products/ias/portal/files/pdk_oc4j_extended.zip
found at page http://www.oracle.com/technology/products/ias/portal/pdk.htmlSorry for the multiple occurences of this posting, Got an error during posting!
-
Pre-configured RF Transactions
Hi,
Could anyone provide me with the link to download pre-configured RF Transactions (Warehouse Management)?
SSAtul,
We are experiencing this same problem with one of our users. Every time the user logs into the system this error immediately displays as the first screen.
Did you ever find the cause of this message?
Thank you
Terry -
Hi Team
There is a business requirement to install pre configured client of SAP (ECC) for US region
So requesting you to guide me where can I get the transport request for pre configured client
Regards
Gopal GanganeGopal,
If you are asking this question, then you probably shouldn't be installing this package on your own.
There are basic installation instructions for all SAP software, and there are specific implementation guides for each package. Normally, this task is performed by a Basis expert.
If you wish to try anyway (I don't recommend this), then all the information you need is either on the BP web site, or links exist on this site to direct you to the info you will need. If you are downloading a baseline package, start here http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000728648& select the one you want. There is an info button, and a download button. Click on the Info button, which will take you to BP docs for the package you have selected. Read ALL, especially the stuff contained in the 'Explore and Evaluate' section.
Better, though, to hand the links and files to your Basis person and allow them to install.
Best Regards,
DB49
Maybe you are looking for
-
Can I order an international iTunes card to the US?
I am an American and have been looking at various ways to set up an international account (German to be precise) in order to expand my horizons and better my German. After a couple attempts, I think that I can set one up if I can get a German iTunes
-
So i decided to do an update for my iphone 4. and I did. but now it is saying to plug up to itunes? what? i am on itunes right now and my phone is plugged up tp the computer. What am i doing wrong?
-
How to get the cost center for the retro balance.
Hi All I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones. Does any one know how can i
-
How can you fade in songs, when going from one song to another?
-
Hello Friends, I am new to Labview. And now I am working on a project where I have to measure the pulse width. I have attached a pulse waveform and would like to measure the pulse width of the first rising the falling edge and log it , rest of the si