Pre-Configured Virtual Machine with OBIEE 11g available?

Hi,
does Oracle offer a pre-configured Virtual Machine with OBIEE 11g? I found an old Virtual Box Image with 10.2..., but nothin newer.
Thanks for your help.
Christoph

Hi,
I don't suppose this is available yet is it? I notice Oracle offer quite a few downloadable images for Virtual Box now, but OBI isn't included in any that I could see.
Thanks,
Mike

Similar Messages

Why pre-configured Solaris VM with 5 (!) virtual hard discs ?

I downloaded the pre-configured Virtual Machine of Solaris Express Edition for VmWare and extracted it as described.
Much to my surprise I found 5 (!) *.vmdks
According to my knowledge these represent 5 independent virtual hard discs.
Why this ?
Can I merge all the 5 virtual discs to one single virtual disc ?
Mike

If for some reason that the server is not cleaned up properly, you may see the error message:
"Error: - 'hostname' has been managed." (from Oracle VM Manager)"
You can manually reset the Oracle VM Server agent. First, shutdown the VMs on the server and make sure no VMs running on the server:
# xm list
# xm shutdown domain-id
Then, stop Oracle VM Server agent:
# service ovs-agent stop
Clean up the Oracle VM server agent state files from /etc/ovs-agent/db location :
# rm -rf /etc/ovs-agent/db/*
And restart Oracle VM Server agent
# service ovs-agent start
One the Oracle VM Server agent is up and running, you can register the server with the Oracle VM Manager.

Failing to assemble Downloaded Pre-built Virtual Machine for SOA Suite and BPM Suite 11g

Hello,
I checked the download checksum of the files downloaded for Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ( Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ) and they all match checksums.
however, when I try to assemble them with 7zip, I get a corrupt error message. I have tried downloading with Chrome and Internet Explorer. I have also tried assembling the 7zip files different ways.
Is there anything else I should try?
Running on Windows 7, 64 bit machine. (with lots of disk space).
Is there any other way to get the files?
thank you.

thanks for the response
I guess I will have to do that as well.
However, it defeats the speed with which can ramp up with the toolset; thus slowing my time I can allocate to learning it...

Issue with OBIEE 11g(11.1.3) Installation

I have installed OBIEE 11g last evening. I was able to connect to the dashboard and run a simple report also – all before shut down. Now when I try to access OBIEE 11g thru port :9704 after starting the BI services, I am getting the following error.
“Error 404–Not Found
From RFC 2068 Hypertext Transfer Protocol — HTTP/1.1:
10.4.5 404 Not Found
My Weblogic server is working fine but im not able to access EM or ANALYTICS.
When I click Programs > OBI > Start BI Services it opens 3 wndows and says weblogic server is started and Im able to login to Weblogic server via “http://localhost:7001/console”.
When i start my machine the following services are started automatically:
1) Oracle WebLogic node Manager
2) OracleDBConsole
3) Oracle Service
4) OracleOraDB11g_home2_TNSListener
The following services are not started:
1) OracleDB11g_home2_ClrAgent
2) OracleJobScheduler
3) Oracle Process Manager(instance1)
4) Oracle VSS Writer Service
can you pls let me know how to start the Weblogic Admin Server?
I have even tried to reinstall and when the installation completes im able to login to “EM”, “weblogic” and “Analytics” also, but once i restart my machine im not able to login to “Analytics” as well as to “EM”.
The process im following is:
When i start the BI Services from Start->Programs->Oracle Business Intelligence->Start BI Services, i get a popup window where it asks for weglogic user and password, then i have entered the user as “weblogic” and has give the password entered at the time of installation, then 2 popups opens and it runs several java files, then im able to login to weblogic but no luck with “em” or “analytics”.
If i try to login to weblogic and try to start the “bi.em”, “biadminservices” i get java error message.
Even i dont get Oracle Logo on the Admin tool also.
Can you pls let me know the repository password also as i have tried with “Admin123? but no luck.
Every time when i do the installation im able to access all the services for the first time but once i restart the machine then only weblogic will be working.
I have installed OBIEE 11.1.3 on Windows 7 Ultimate N(32 bit) OS with Oracle11g Database
Pls let me know if im missing anything here?
Appreciate your help

This is a really basic question... but how much memory do you have, and how long have you waited for all the processes to load? On a Windows XP Virtual Machine with 3GB, I have waited 20 minutes before being able to access. And until then, you will see the error you have received.
Just a thought...

Pre-built virtual machine VERR_LDR_GENERAL_FAILURE in vbox 3.2.10

I am trying to run the SOA-BPM pre built virtual machine in http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html with vbox 3.2.10 r66523 (latest) but after loading and trying to start the VM I get an error. I transcribed the logs below. Anyone knows how to fix it? Or at least know a version of vbox that works with that VM?
00:00:45.058 VirtualBox 3.2.10 r66523 win.x86 (Oct 8 2010 15:56:50) release log
00:00:45.058 Log opened 2010-11-09T22:23:00.548144700Z
00:00:45.058 OS Product: Windows XP Professional
00:00:45.058 OS Release: 5.1.2600
00:00:45.058 OS Service Pack: 3
00:00:45.755 DMI Product Name: OptiPlex 755
00:00:45.762 DMI Product Version:
00:00:45.765 Host RAM: 3316MB RAM, available: 2626MB
00:00:45.765 Maximum user application address: 0xbffeffff
00:00:45.765 Maximum allowed guest RAM size: 2048MB
00:00:45.765 Executable: C:\PROGRA~1\Oracle\VIRTUA~1\VirtualBox.exe
00:00:45.765 Process ID: 1880
00:00:45.765 Package type: WINDOWS_32BITS_GENERIC
00:00:45.921 pdmR3LoadR0U: pszName="VMMR0.r0" rc=VERR_LDR_GENERAL_FAILURE
00:00:45.933 VMSetError: D:\tinderbox\win-3.2\src\VBox\VMM\VM.cpp(549) vmR3CreateU; rc=VERR_LDR_GENERAL_FAILURE
00:00:45.933 VMSetError: Failed to load VMMR0.r0
00:00:45.933 VMSetError: D:\tinderbox\win-3.2\src\VBox\VMM\VM.cpp(323) VMR3Create; rc=VERR_LDR_GENERAL_FAILURE
00:00:45.933 VMSetError: Unknown error creating VM
00:00:45.933 ERROR [COM]: aRC=E_FAIL (0x80004005) aIID={6375231a-c17c-464b-92cb-ae9e128d71c3} aComponent={Console} aText={Failed to load VMMR0.r0 (VERR_LDR_GENERAL_FAILURE).
00:00:45.935 Unknown error creating VM (VERR_LDR_GENERAL_FAILURE)} aWarning=false, preserve=false
00:00:46.013 Power up failed (vrc=VERR_LDR_GENERAL_FAILURE, rc=E_FAIL (0X80004005))

I had the same issue. Upgrading Virtual box from 4.1.16 to 4.1.20 solved the problem.

Not able to configure Act As in OBIEE 11g - The application is logging out

Hi All,
We are trying to configure Act As in OBIEE 11g. The list of users gets populated when I click on Act As. However, when I select any user from the list, the applications logs out. The possible reason could be that OBIEE is not able to authenticate the user (We are using table based Authentication). Please give some pointers to fix it.
Also, I am curious to understand the authentication process in case of Act As. The list that gets populated is a list of target users from the table. In our case, the username and display name gets populated. But, how does OBIEE check if that is a valid user or not?
Thanks in Anticipation,
Karan

Does Act As functionality work with BI Publisher? I am able to login and select Act As and pick a user and view all dashboards, however when I click a PDF embedded in a dashboard page from Publisher, it says Unauthorized Access: please contact the administrator. If I am logged in as myself I can view the PDF. If I am logged in as the user I acting as I can view the pdf, but if I login as myself and act as that user and try and view it, that is when the error occurs, so am wondering is Act As is incompatible with BI Pub.

Cannot create guest virtual machine with Solaris 10 SPARC in Oracle VM 2.2

Dear All,
I try many times to create guest virtual machine with Solaris 10 SPARC but not get success.
When I created it already and then I start the Power On button, it run normally but the Console button cannot click on (hide). After that the virtual machine running abit then it change status to Powered Off.
Please kindly give advice for this.
Thanks and regards,
Heng

I storgly doubt, VMware player is available for Solaris 10 SPARC version.
Solaris 10 is not a comercial product, like ubuntu, windows, MAC etc... It's really for a server.
That's the reason still I hate Solaris 11 as a desktop. You have very limited product/software.... This may change for Solaris 11, but U can't expect one for Solaris 10.

Not able to connect Azure Linux Virtual Machine with Putty

Hi,
I am not bale to connect Azure Linux Virtual Machine with Putty... Error shows "Network error: connection timed out".
Please help.
Thanks,
Techsol
Thanks, Kk

Hi TechSol01,
Thanks for posting here.
I suggest you to try the below steps
On a computer running a Windows operating system, you might want to use an SSH client such as PuTTY. For more information, see the
PuTTY Download Page.
On a computer running a Linux operating system, you might want to use an SSH client such as OpenSSH. For more information, see
OpenSSH.
If it is the endpoint configuration, you can go to the portal and add port 22, (it should already be there by default).
Now if it is locked out of the VM because of the firewall on the VM, which is called iptables , You won't be able to connect to the VM,
If you haven’t configured the port 22. You may have to follow the below steps :
A = Original VM (Inaccessible VM)
B = New VM (New Temp VM)
1) Stop VM A via the Azure management portal
2) Delete VM A BUT select “keep the attached disks”
3) Once the lease is cleared, attach the Data Disk from A to VM B via the Azure Portal, Virtual Machines, Select “B”, Attach Disk
4) On VM “B” eventually the disk will attach and you can then mount it.
5) Locate the drive name to mount, on VM “B” look in relevant log file note each linux is slightly different.
grep SCSI /var/log/kern.log (ubuntu)
grep SCSI /var/log/messages (centos, suse, oracle)
6) Mount the attached disk onto mountpoint /tempmount
df -h
mkdir /tempmount
mount /dev/sdc1 /tempmount
df –h
7) Now you should be able to clear the rules set from the configuration file of the firewall, by accessing it
through /tempmount
Let me know if this works
Girish Prajwal

Webcenter PS3 pre-build virtual machine question

Experts,
I have following queries regarding VM for web center
1) What are the limitation of using pre-build virtual machine for development/testing environment compared to standard installation?
2) What are the webcenter features not supported by pre-build WC VM but is supported in standard installation?
I am thinking of using pre-build WC VM for development and testing environment. So, want to know the limitation before using it.
Appreciate any help on this.
Ashish
P.S - Standard installation is installing DB (using RCU), weblogic & webcenter suite.

The pre build is very good for demonstration purpose. You can do some development on it but i don't think this is recommended.
The pre build machine is just a plain installation with a DB, weblogic and webcenter suite. If you create your own VM with the same software, than there is not much difference between the pre build machine.
If you don't plan on using a real server for your development purpose than you can use the pre build machine. I don't know if it is allowed so maybe you should check this with Oracle. There isn't a real difference between an installation that you will do an the pre build machine to technicaly, you could use it... Licence wise... you should check it with Oracle.

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

Integrating SQL Server 2005 with OBIEE 11g

Dear Gurus,
Is there any documentation about how to using SQL Server 2005 as datasource combined with OBIEE 11g?
Clear steps with pictures will be very helpful.
Thank so much
Regards
JOE

Hi,
Please refer this link.
http://rnm1978.wordpress.com/2009/08/21/querying-sql-server-from-obiee-running-on-unix/
Re: How to connect Linux OBIEE repository to SQL Server 2005 database
Hope this help's
THanks
Satya

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Oracle Life science Data Hub integrated with OBIEE 11g

Hi all,
I have couple of questions from my end,
1. How Oracle Life Science Data Hub can be Integrated with OBIEE 11g.
2. Whether Oracle LSH is a separate software ? if it so kindly provide the link to download the LSH.
Many thanks in advance.
Regards,
Murali

Hi Murali,
I do not know whether obiee can use Oracle LSH as a source or not but please refer below link. It says that
1) Users can then launch the Oracle Business Intelligence Dashboard
either through Oracle LSH or through a URL to see data visualizations.
2)
Oracle LSH Release 2.2 supports using OBIEE 10.1.3.4.1 for both programs and
visualizations and OBIEE 11.1.1.5.0 for visualizations only.
Please check with you administrator.
Thanks,
Amol
(Please mark this answer, if you find correct)

Installing Pre-built Virtual Machine for Oracle WebCenter Portal error

Hi,
I am trying to install the Pre-built Virtual Machine for Oracle WebCenter Portal: Framework 11gR1 (11.1.1.4.0) onto a Laptop (500G HDD 8G Ram) running Windows 7 to learn.
http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html
I want to run in a VirtualBox Linux setup etc.
I have downloaded all the files except the REAVDD-HOL-WC.ovf which would not download so I saved in browser to the same directory etc.
I have set the preferences in Virtual Box to the same directory where I have downloaded the files to but when I Import Applicance and select C:\users\Tony\Virtual Box VMs and select the defaults and import I get an error box stating:
Failed to import appliance C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC.ovf.
Could not open the medium storage unit 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk'.
VD: error VERR_ACCESS_DENIED opening image file 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk' (VERR_ACCESS_DENIED).
Result Code: VBOX_E_FILE_ERROR (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
Anybody got any idea how to fix this?
Thanks
Tony
Edited by: 880197 on 19-Aug-2011 03:08
Edited by: 880197 on 19-Aug-2011 03:44

I've imported this appliance (and others) on Windows 7 32-bit on a Lenovo W500, on an iMac, and on a MacBook. The one error you should encounter during the "import appliance" step is a path error related to shared folder (the canned/hard-coded path in the ovf file points to a place that is not likely to exist on your computer, so just comment out the D:\TEMP\Host path, or make it for that matter).



You can alter system set memory_target=300M scope=both and set your VM memory to 2.5GB and everything will run fine (using the vmctl script to start up what's needed). The "1" option is all that is needed for the tutorial shown in the documentation. If you run the admin server, you will see things run a good bit slower. Part of the tutorial assumes you know about UCM and how to take the UCM content in the sample files and upload those into the repository. You can delete the file already loaded and then do a single file upload to "re-load" the various directories/folders for the menu/home/etc. Upload the png and other files into the same folder (menu.html, menuBanner.png, etc. all go into the same Menu folder). It's not worth the time to set the bulk upload because you have to go out into UCM and dig around the admin settings, stop/restart, and so on. You can also use the contentadmin user (welcome1) to do the file upload.

Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
Windows Phone Emulator is unable to verify that the virtual machine is running:
Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

No you cannot do that. You need a physical machine that supports Hyper-V
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Pre-Configured Virtual Machine with OBIEE 11g available?

Similar Messages

Maybe you are looking for