Pre-defined matchcode to a parameter

how can i assign a pre-defined matchcode to a parameter so that it can
evoked in at selection-screen on value-request event?? or are there any
function modules for this purpose?? It's a report program not a
transaction.
please throw some light...

You can create a Dynamic Matchcode by using F4IF_INT_TABLE_VALUE_REQUEST
Greetings,
Blag.

Similar Messages

How to export multiple copies reoprts based on parameters and with pre-defined naming

Hi All:
I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
report file.
We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
Thanks a lot for your help.
Cheers
Johnny

Hi JohnnyKahWang,
As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
please refer to the following steps:
1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Data-driven Subscription.
5. Choose a method of delivery, then select data source for the subscription.
6. Specify a query that retrieves subscriber data like below:
CREATE TABLE Name (
BranchName varchar(20),
ExcelFileName varchar(20),
Email_to varchar(50)
INSERT INTO Name values
('Branch1', 'Name1', '[email protected]'),
('Branch2', 'Name2', '[email protected]'),
('Branch3','Name3', '[email protected]');
IF we chose Windows File Share delivery extension, we can define path in the query.
7. Specify delivery extension options like below:
8. Specify report parameters to BranchName.
9. Specify when the subscription is processed, then click Finish to save the configuration.
For more information about Data-driven Subscription, please refer to the following documents:
http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Not a pre-defined type or a type from a type group

Hi experts,
I create a interface Z_I_ADOBETEST, and add the following parameter for import:
/1BCDWB/DOCPARAMS TYPE   SFPDOCPARAMS 1   1
IT_ITEM             TYPE     ZTVBAP      0     1
IT_HEADER       TYPE     ZTVBAK      0     1
IMAGE_URL      TYPE     STRING      0     1
I added 2 data types by SE11, and actived them
ZTVBAP    line type VBAP
ZTVBAK     line type VBAK
When I checked (ctrl+F2) interface Z_I_ADOBETEST, I got a error:
Interface Z_I_ADOBETEST
"ZTVBAK" is not a pre-defined type or a type from a type group.
THANKS

Thanks for Otto's help. I'm a newbie at Adobe forms.
For ZTVBAP, it's table type.
The interface type is ABAP Dictionary-Based interface.
Thanks.

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Custom Report using pre-defined template

In 2012, How to create custom report using pre-defined reports template in below format?
Column1 :- Device Name
Column2 :- When installed (Date & Time)
Column3 :- Success (Date & Time)
Column3 :- Failed (Date & Time - With which error code)
Column4 :- Not Installed
Regards,
Onkar.

Here is what you need to do.
Start by writing the SQL query that you want.
Clone one of the existing report
Replace the SQL query with the new query.
Update the columns with what you need.
http://www.enhansoft.com/

Issues in creating a Pre-defined filter in Universe

Hello Everyone,
Here is the problem...
The idea is to have a prompt (Prompt1) to allow user select the Input type ..ie."Check Number or Invoice Number". There is the second prompt (Prompt2) which will allow user to input a value. Based on Prompt1 value, the prompt2 input should be evaluated against Check Number object or Invoice Number Object.
This is using a universe based on a BEx query.
Following useful information in the OLAP universe Best practice doc available [here] which Ingo once shared with us [on this forum], I created following pre-defined filter in my universe.
<OPTIONAL><FILTER EXPRESSION="IIF(@Prompt('Select Input type','A',{'Check','Invoice'},mono,free)='Check', [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01])"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Enter Check or Invoice Number','A',,mono,free)"/></CONDITION></FILTER></OPTIONAL>
Where [ZFIAP_IS1___F20].[LEVEL01] = Check Number & [ZFIAP_IS1___F46].[LEVEL01] = Invoice number.
The object is parsing without errors in the universe. But when I use it in my report, the report throws an error " failed to execute with the error Invalid MDX command with " "
I took the MDX statment and tried to run/debug using MDXTEST and could never get it to work with the above objects. It was seen that the filter created in such a way is handled [Measures] object which only accepts Numeric values and not Strings. Where as my Check number and Invoice Number values are strings. The MDx statement is given below.
Has anyone experienced this issue earlier ?
WITH MEMBER [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] AS ' IIF(Check=Check, [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01]) ' SELECT { [Measures].[4GQZ1D26O6QATUDY32CGL1C38] } ON COLUMNS , NON EMPTY FILTER( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZFIAP_IS1___F93].[LEVEL01].MEMBERS, [ZFIAP_IS1___F94].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F92].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F71].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F55].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F46].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F20].[LEVEL01].MEMBERS ), [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] = 0000041924670) DIMENSION PROPERTIES [ZFIAP_IS1___F55].[2ZCCNODE01], [ZFIAP_IS1___F55].[2ZCCNODE02], [ZFIAP_IS1___F55].[2ZCCNODE03] ON ROWS FROM [ZFIAP_IS1/QZFIAP_BOUNV2]
Edited by: vaibhav patil on Feb 11, 2010 9:53 PM
Edited by: vaibhav patil on Feb 11, 2010 9:55 PM

Hi,
In fact, what you are requiring is feasible in Microsoft Analysis Services by defining a calculated meaure and a filter using this calculated measure.
Unfortunately, due to MDX restrictions in SAP, it is not possible to do it in universes.
I suggest that you create a range variable on Time to allow the user to only retrieve the dates needed.
You can retrieve all the dates and then apply a filter in Web Intelligence document: this solution might have the disadvantage to retrieve more data than necessary.
Didier

Pre-defined program in ECC 6.0

Hi Experts,
I have a issue that can resolve by u guys,
Please provide the pre-defined program in ECC 6.0 that can stored the program code and all the includes in a program for the given path.
Advance Thanks.
u r answer will be given points.

Dear Lakshman,
The standard pricnt program of PO MEDRUCK
dont modify this because this is original one copy and change copy program
Hope this helps you
Prem

Pre defined BAPI for Change Master

- Is there any Pre defined BAPI or Function Module which will serve the functionality similar to the RFC RFC_CREATE_CHANGE_MASTER.

Hi Nikhil,
For the SAP R/3 4.7 version, there is the BAPI_ECMORD_CREATE BAPI Function Module.
NOTE: To find the BAPIs in the R/3 system, you can use the BAPI transaction.
Regards,
Daniel Carvalho.

Pre-defined header in report

Hi All,
Maybe a stupid question but ... when we create a new ABAP (se38->create) in our system, a report header (lines and pre-defined fields) is already in there. It's not an existing pattern in the system (no entries in TSE05).
Can anyone tell me where this header in the ABAP is coming from and how we can change it ?
Thanks,
Rob Makelaar.

Hi,
Check this example code
PROGRAM ZARS NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: / 'line 1'.
WRITE: / 'line 2'.
WRITE: / 'line 3'.
TOP-OF-PAGE.
WRITE: / 'Heading'.
ULINE.
a®

MDX syntax for current year in a Pre-defined condition

Hi,
I'm looking for assistance in building a Pre-defined condition in a universe based on an MSAS 2005 OLAP cube, that only returns the current year.
My year is defined as [Time Accounting].[Accounting].[Accounting Year]
I can create a Pre-defined filter that accepts a constant value as follows:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="2008"/>
     </CONDITION>
</FILTER>
and it works fine, however, I would like to make it dynamic.
There is an attribute called current year that is defined as [Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value] but when I try and put this into my pre-defined filter nothing is returned:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="[Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value]"/>
     </CONDITION>
</FILTER>
Is this possible? What am I doing wrong?
What I'm ultimately aiming for is a rolling 12 month condition.
Thanks,
Colin

Hi,
In OLAP universe, you cannot define a filter with CAPTION = another universe object.
What you can do is CAPTION = String or CAPTION = @Prompt.
By the way, if you want to achieve what you are requiring, I suggest you create a calculate expression such as:
<EXPRESSION>
IIF([Time Accounting].[Accounting Year.].CurrentMember.Properties("Name") = [Time Accounting].[Accounting Year.].CurrentMember.Properties("Current Year"), 1, 0)
</EXPRESSION>
Then you can define your filter on your new calculated expression and the operator to Equal and CAPTION = 1
Didier

Trying to change a pre-defined report. Date format is wrong, 20140217 should be 17.02.2014.

The pre-defined report in sccm "Computers with specific software registered in Add Remove Programs" has a query like this:
Select DISTINCT sys.Netbios_Name0, fcm.SiteCode, sys.User_Domain0, sys.User_Name0, sys.Operating_System_Name_and0, arp.DisplayName0,
arp.InstallDate0
FROM fn_rbac_R_System(@UserSIDs) sys
JOIN v_Add_Remove_Programs arp ON sys.ResourceID = arp.ResourceID
JOIN v_FullCollectionMembership fcm on sys.ResourceID=fcm.ResourceID
WHERE DisplayName0 like @filterwildcard and fcm.CollectionID=@CollID
I have highlighted the part that I added to the report.
I have inserted an extra column in Report Builder, and added the value inside the column and the install date can be viewed in the report. However the date format is shown like this: 20140217 - I want it to be 17.02.2014.
So I try to change this via right-clicking on the cell in Report Builder, Text Box Properties, Number. Here I choose Date and the correct format. However it does not change the date format when saving and running the report again. It just stays the same.
Kthxbai

The format can be change if it was a date. But if you look that field it is NOT a date, it is a string and therefore will not change to the data format that you want.
On top of this, there is a bigger problem. Not ever setup records the date or in the same format so.....
http://www.enhansoft.com/
Sorry - I am not sure what you mean by the last statement. "Not ever setup records the date or in the same format so.."
- Would it be possible to elaborate? Thank you very much.
Kthxbai

Error: pre-defined filters are no longer available in the universe

Hi All,
I'm getting following error message while schedule the webi report .
"Some pre-defined filters are no longer available in the universe. See your Business Objects administrator. (Error: WIS 00003) ".
I have migrated the universe and reports from XIR2 to XIR3.1 ; and getting above error in XI3.1 , its works fine XIr2.
Based on this error i have checked the Predefine filter in universe and its available . but report shows error.
Also i have created the new conditions with different name and added into report. but again i getting same error while schedule the report
However reports run fine after changed the sql mode as custom sql with same sql from objects and conditions.
Could you please anyone help for this issue?
Advance Thanks
Ponnarasu

Hi SC,
Thanks for your reply . our version 12.3.6.1006. X1 3.1 was installed with SP3 .
Anyway this issue is resolved via following method.
I have created the new universe ( Create new universe and copied schema and objects from exiting universe ) and exported in to universe folder . All related reports query changed to new universe. Now reports runing fine and without error.
Thanks
Ponnarasu

Must i_structure_name for LVC_FIELDCATALOG_MERGE be pre-defined in dict?

When I've used lvc_fieldcatalog_merge in the past, I've always set i_structure_name to a literal - the name of a structure that I've defined in Data Dictionary.
If I declare a structure type in the "TOP" of an X function group, can I set i_structure_name to the name of this type ????
Or does i_structure_name have to be the name of a pre-defined dictionary structure?
Thanks for whatever time you can afford to spend considering this matter?

check the sample code..
REPORT ZTEST_FIELDCATLOG.
type-pools: slis.
DATA: it_fieldcat type SLIS_T_FIELDCAT_ALV,
     it_lvcfcat type lvc_t_fcat.
include ztest_top.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'IT_DATA'
   I_INCLNAME                   = 'ZTEST_TOP'
CHANGING
    ct_fieldcat                  = it_fieldcat
* EXCEPTIONS
*   INCONSISTENT_INTERFACE       = 1
*   PROGRAM_ERROR                = 2
*   OTHERS                       = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LVC_TRANSFER_FROM_SLIS'
EXPORTING
    it_fieldcat_alv       = it_fieldcat
*   IT_SORT_ALV           =
*   IT_FILTER_ALV         =
*   IS_LAYOUT_ALV         =
IMPORTING
   ET_FIELDCAT_LVC       = it_lvcfcat
*   ET_SORT_LVC           =
*   ET_FILTER_LVC         =
*   ES_LAYOUT_LVC         =
tables
    it_data               = it_data
* EXCEPTIONS
*   IT_DATA_MISSING       = 1
*   OTHERS                = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
BREAK-POINT.
Top include
*& Include           ZTEST_TOP
data: begin of it_data occurs 0,
        vbeln like vbak-vbeln,
        matnr like mara-matnr,
      end of it_data.

Custom UME attribute with pre-defined values

All,
Is it possible to define a custom UME attribute which will have pre-defined values so that it appears as dropdown select when the admin creates a user?
Your help is appreciated.
Thanks

Hi Aakash,
I am not a software developer so I cannot really give you details. I can point you to our documentation: [SAP NetWeaver Developer's Guide|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8b/0b674240449c60e10000000a1550b0/frameset.htm]
This guide should point you in the right direction. The UME has a public API with which you access the attributes in question programmatically. What you do from there depends what you as a programmer want to do.
-Michael

Pre-defined matchcode to a parameter

Similar Messages

Maybe you are looking for