Pre-defined performance - MSS - Cascading team Goals

Hi Experts,
we are using the SAP pre-defined performance EHP4 system.
We have created a template in our DEV system and are able to create the appraisal document from the Manager and update by the employee.
Within the team goals screen (iview) of the pre-defined template, we can select the view u201CDirect Reportsu201D which allows us to Cascading of team Goals.
Our issue is if we select the view u201COrg Unit structureu201D or the u201CEmployee structureu201D then we get a Portal crash
The other related issue is the goal end date is being defaulted as 31.12.9999 and we are getting the error u201CEntered dates must be in the current yearu2019 where the plan start date is 01.08.2010 and the end date is 31.07.2011.
Does the start and end date of the goals have to be a calendar year?
Please can someone tell me if they did any additional config or found a solution to these issues?
Many thanks
Oliver

Hi,
in the standard the team goals period is limited to a maximum of one year. But SAP provides two enhancements (enhancement spot HRHAP00_GOAL_PERIOD) that can be used to allow different periods. These are:
- HRHAP00GOAL_PERIOD_GEN For the generic UI
- HRHAP00GOAL_PERIOD_PMP For the predifined process
So you may use these to fulfill your requirement. Just take into account that the Goal assessment for the goals (if they are valid more than one year) would be the same for all the validity period of the goal.
Regards,
Ana

Similar Messages

Rating scale does not appear in Pre-defined Performance Mgmt Wizard

Hi Experts,
I am implementing SAP Pre-defined Performance template.
When configuring IMG entry u201CDefine Templates for Performance Managementu201D I run the wizard for Performance, and when I get to the rating the only options that are presented are SAP standard delivered values e.g. Standard Quality Scale 1-5, Standard Quality Scale 0-10, Standard Quality Scale 1-3, Standard Quality Scale 1-3.
Now I have previously configured rating scale Team Performance with rating values
1-below expectations
2-meets expectations
3-exceeds expectations
However, this rating scale does not appear in the dropdown list to select from.
Please can someone explain what could be missing or if they had this issue before and were able to solve this.
Many thanks
Oliver

Hi joker_of_the_deck
thank you for your quick response. Much appreciated.
I checked transaction OOHAP_BASIC and my scale is already valid within the Value List.
There are many other scales in our system within this value list but only the entries I mentioned previously are available in the Pre-defined performance wizard.
Do you have any other suggestions on why the system would not allow my scale rating to be selected from the pre-defined performance template as part of the wizard setup?
Regards
Oliver

Pre-defined performance PMP_PROC_REJ u201CReject Overall Appraisalu2019

Hi Experts,
we are using the SAP pre-defined performance EHP4 system.
We have created a template in our DEV system and are able to create the appraisal document from the Manager and update by the employee.
At the dnd of the process of the overall appraisal, if the employee selects the pushbutton to u201CReject overall appraisalu201D this seems to stop the appraisal from being edited by the manger nor the employee.
I would have expected a workflow to be generated or a means for the manager and the employee to have an offline conversation and then the manager could re-open the te team members document to make the final change and complete the document.
The pushbutton PMP_PROC_REJ u201CReject Overall Appraisalu2019 only has subsequent status of u201CClosed rejectedu201D
Please can someone tell me if they did any additional config or found a solution to this issue?
Many thanks
Oliver

Hi Swapnil,
we decided to stop the process when the employee hits reject overall appraisal and had a new workflow to go to HR and the Manager to notify them of the rejection.
it may be possible to write some custom function to automate phap_admin but I would think extremely difficult as it would have to pass the correct credentials from the Portal to the backend to phap_admin and change the status to in process.
It may be better to have client process to be informed of the rejection to understand why the employee did reject and for HR to control re-setting the status using phap_admin.
Hope this makes sense
Thanks
Oliver

Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality

Hi Friends,
Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality.
Under Team Object While try to cascade goals, it pop-Up Warning Msg u201CChoose Save to save the goal in the employee document. The goal can no longer be deleted, only set to obsoleteu201D.
If we click Ok to proceed further, I am getting error stating u201CYou have made no selection" and " No appraisal template defined ".
Same functionality is working fine in u201CPerformance Management (Predefined)u201D
With Regards
Seranjeeve Kumar

Please set the parameter PROCESS "PMP" in the iview configuration.
ie
ROLE_ID=PA&PROCESS=PMP in application parameters
content provided by SAP ->
specialist ->
Talent management Specialist ->
iViews ->
COmpany goals etc
and you can confirm using this
CL_HAP_CASCADE_GOALS > meth0d GET_VALID_APPRAISAL_TEMPLATES
The parameter mentioned in the note 1457057, the one that you enter in
transaction SE80 is the default value. However, if you call application
with parameter PROCESS=PMP then the PMP process for cascading goals will
be used.
check note 1523527

Error in Maintain Performance Documents under Team in MSS

Getting below error when i click Maintain Performance Documents under Team in MSS
java.lang.NullPointerException
     at com.sap.xss.hr.mbo.blc.BMboStatusComp.resetGlobalMboR3Data(BMboStatusComp.java:260)
     at com.sap.xss.hr.mbo.blc.wdp.InternalBMboStatusComp.resetGlobalMboR3Data(InternalBMboStatusComp.java:195)
     at com.sap.xss.hr.mbo.blc.BMboStatusCompInterface.resetGlobalMboR3Data(BMboStatusCompInterface.java:150)
     at com.sap.xss.hr.mbo.blc.wdp.InternalBMboStatusCompInterface.resetGlobalMboR3Data(InternalBMboStatusCompInterface.java:168)
     at com.sap.xss.hr.mbo.blc.wdp.InternalBMboStatusCompInterface$External.resetGlobalMboR3Data(InternalBMboStatusCompInterface.java:224)
     at com.sap.xss.hr.mbo.vac.VMboStatusComp.onBeforeOutput(VMboStatusComp.java:227)
     at com.sap.xss.hr.mbo.vac.wdp.InternalVMboStatusComp.onBeforeOutput(InternalVMboStatusComp.java:187)
     at com.sap.xss.hr.mbo.vac.VMboStatusCompInterface.onBeforeOutput(VMboStatusCompInterface.java:143)
     at com.sap.xss.hr.mbo.vac.wdp.InternalVMboStatusCompInterface.onBeforeOutput(InternalVMboStatusCompInterface.java:136)
     at com.sap.xss.hr.mbo.vac.wdp.InternalVMboStatusCompInterface$External.onBeforeOutput(InternalVMboStatusCompInterface.java:212)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Regards
Karthi D

Hi Karthi,
Did u check below thread?
check the notes mentioned in that and suggested steps as it applies to your issue also
Re: MSS - Maintain Performance Document iView
Koti Reddy

How to export multiple copies reoprts based on parameters and with pre-defined naming

Hi All:
I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
report file.
We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
Thanks a lot for your help.
Cheers
Johnny

Hi JohnnyKahWang,
As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
please refer to the following steps:
1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Data-driven Subscription.
5. Choose a method of delivery, then select data source for the subscription.
6. Specify a query that retrieves subscriber data like below:
CREATE TABLE Name (
BranchName varchar(20),
ExcelFileName varchar(20),
Email_to varchar(50)
INSERT INTO Name values
('Branch1', 'Name1', '[email protected]'),
('Branch2', 'Name2', '[email protected]'),
('Branch3','Name3', '[email protected]');
IF we chose Windows File Share delivery extension, we can define path in the query.
7. Specify delivery extension options like below:
8. Specify report parameters to BranchName.
9. Specify when the subscription is processed, then click Finish to save the configuration.
For more information about Data-driven Subscription, please refer to the following documents:
http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Custom Report using pre-defined template

In 2012, How to create custom report using pre-defined reports template in below format?
Column1 :- Device Name
Column2 :- When installed (Date & Time)
Column3 :- Success (Date & Time)
Column3 :- Failed (Date & Time - With which error code)
Column4 :- Not Installed
Regards,
Onkar.

Here is what you need to do.
Start by writing the SQL query that you want.
Clone one of the existing report
Replace the SQL query with the new query.
Update the columns with what you need.
http://www.enhansoft.com/

Issues in creating a Pre-defined filter in Universe

Hello Everyone,
Here is the problem...
The idea is to have a prompt (Prompt1) to allow user select the Input type ..ie."Check Number or Invoice Number". There is the second prompt (Prompt2) which will allow user to input a value. Based on Prompt1 value, the prompt2 input should be evaluated against Check Number object or Invoice Number Object.
This is using a universe based on a BEx query.
Following useful information in the OLAP universe Best practice doc available [here] which Ingo once shared with us [on this forum], I created following pre-defined filter in my universe.
<OPTIONAL><FILTER EXPRESSION="IIF(@Prompt('Select Input type','A',{'Check','Invoice'},mono,free)='Check', [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01])"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Enter Check or Invoice Number','A',,mono,free)"/></CONDITION></FILTER></OPTIONAL>
Where [ZFIAP_IS1___F20].[LEVEL01] = Check Number & [ZFIAP_IS1___F46].[LEVEL01] = Invoice number.
The object is parsing without errors in the universe. But when I use it in my report, the report throws an error " failed to execute with the error Invalid MDX command with " "
I took the MDX statment and tried to run/debug using MDXTEST and could never get it to work with the above objects. It was seen that the filter created in such a way is handled [Measures] object which only accepts Numeric values and not Strings. Where as my Check number and Invoice Number values are strings. The MDx statement is given below.
Has anyone experienced this issue earlier ?
WITH MEMBER [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] AS ' IIF(Check=Check, [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01]) ' SELECT { [Measures].[4GQZ1D26O6QATUDY32CGL1C38] } ON COLUMNS , NON EMPTY FILTER( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZFIAP_IS1___F93].[LEVEL01].MEMBERS, [ZFIAP_IS1___F94].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F92].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F71].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F55].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F46].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F20].[LEVEL01].MEMBERS ), [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] = 0000041924670) DIMENSION PROPERTIES [ZFIAP_IS1___F55].[2ZCCNODE01], [ZFIAP_IS1___F55].[2ZCCNODE02], [ZFIAP_IS1___F55].[2ZCCNODE03] ON ROWS FROM [ZFIAP_IS1/QZFIAP_BOUNV2]
Edited by: vaibhav patil on Feb 11, 2010 9:53 PM
Edited by: vaibhav patil on Feb 11, 2010 9:55 PM

Hi,
In fact, what you are requiring is feasible in Microsoft Analysis Services by defining a calculated meaure and a filter using this calculated measure.
Unfortunately, due to MDX restrictions in SAP, it is not possible to do it in universes.
I suggest that you create a range variable on Time to allow the user to only retrieve the dates needed.
You can retrieve all the dates and then apply a filter in Web Intelligence document: this solution might have the disadvantage to retrieve more data than necessary.
Didier

Pre-defined program in ECC 6.0

Hi Experts,
I have a issue that can resolve by u guys,
Please provide the pre-defined program in ECC 6.0 that can stored the program code and all the includes in a program for the given path.
Advance Thanks.
u r answer will be given points.

Dear Lakshman,
The standard pricnt program of PO MEDRUCK
dont modify this because this is original one copy and change copy program
Hope this helps you
Prem

Pre defined BAPI for Change Master

- Is there any Pre defined BAPI or Function Module which will serve the functionality similar to the RFC RFC_CREATE_CHANGE_MASTER.

Hi Nikhil,
For the SAP R/3 4.7 version, there is the BAPI_ECMORD_CREATE BAPI Function Module.
NOTE: To find the BAPIs in the R/3 system, you can use the BAPI transaction.
Regards,
Daniel Carvalho.

Pre-defined header in report

Hi All,
Maybe a stupid question but ... when we create a new ABAP (se38->create) in our system, a report header (lines and pre-defined fields) is already in there. It's not an existing pattern in the system (no entries in TSE05).
Can anyone tell me where this header in the ABAP is coming from and how we can change it ?
Thanks,
Rob Makelaar.

Hi,
Check this example code
PROGRAM ZARS NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: / 'line 1'.
WRITE: / 'line 2'.
WRITE: / 'line 3'.
TOP-OF-PAGE.
WRITE: / 'Heading'.
ULINE.
a®

MDX syntax for current year in a Pre-defined condition

Hi,
I'm looking for assistance in building a Pre-defined condition in a universe based on an MSAS 2005 OLAP cube, that only returns the current year.
My year is defined as [Time Accounting].[Accounting].[Accounting Year]
I can create a Pre-defined filter that accepts a constant value as follows:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="2008"/>
     </CONDITION>
</FILTER>
and it works fine, however, I would like to make it dynamic.
There is an attribute called current year that is defined as [Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value] but when I try and put this into my pre-defined filter nothing is returned:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="[Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value]"/>
     </CONDITION>
</FILTER>
Is this possible? What am I doing wrong?
What I'm ultimately aiming for is a rolling 12 month condition.
Thanks,
Colin

Hi,
In OLAP universe, you cannot define a filter with CAPTION = another universe object.
What you can do is CAPTION = String or CAPTION = @Prompt.
By the way, if you want to achieve what you are requiring, I suggest you create a calculate expression such as:
<EXPRESSION>
IIF([Time Accounting].[Accounting Year.].CurrentMember.Properties("Name") = [Time Accounting].[Accounting Year.].CurrentMember.Properties("Current Year"), 1, 0)
</EXPRESSION>
Then you can define your filter on your new calculated expression and the operator to Equal and CAPTION = 1
Didier

Trying to change a pre-defined report. Date format is wrong, 20140217 should be 17.02.2014.

The pre-defined report in sccm "Computers with specific software registered in Add Remove Programs" has a query like this:
Select DISTINCT sys.Netbios_Name0, fcm.SiteCode, sys.User_Domain0, sys.User_Name0, sys.Operating_System_Name_and0, arp.DisplayName0,
arp.InstallDate0
FROM fn_rbac_R_System(@UserSIDs) sys
JOIN v_Add_Remove_Programs arp ON sys.ResourceID = arp.ResourceID
JOIN v_FullCollectionMembership fcm on sys.ResourceID=fcm.ResourceID
WHERE DisplayName0 like @filterwildcard and fcm.CollectionID=@CollID
I have highlighted the part that I added to the report.
I have inserted an extra column in Report Builder, and added the value inside the column and the install date can be viewed in the report. However the date format is shown like this: 20140217 - I want it to be 17.02.2014.
So I try to change this via right-clicking on the cell in Report Builder, Text Box Properties, Number. Here I choose Date and the correct format. However it does not change the date format when saving and running the report again. It just stays the same.
Kthxbai

The format can be change if it was a date. But if you look that field it is NOT a date, it is a string and therefore will not change to the data format that you want.
On top of this, there is a bigger problem. Not ever setup records the date or in the same format so.....
http://www.enhansoft.com/
Sorry - I am not sure what you mean by the last statement. "Not ever setup records the date or in the same format so.."
- Would it be possible to elaborate? Thank you very much.
Kthxbai

Pre-defined performance - MSS - Cascading team Goals

Similar Messages

Maybe you are looking for