Pre dial # or *

Before, with 3GS, I wrote pre-programmed contact with * or #. It was for exemple to avoid waiting on a responder or dial a code for taxi.
one of my contact was 0142880469p*2 ; and it was working!
BUT now with my iphone 4S, my operator says "it s a wrong number" How can I do?
please help me

Re: Pre-paid mobile automatic recharge
hi I have a recharge pre paid voucher and its still can be activated I have serial number for it its 91823900010069 only problem have is don't have recharge authorized no on voucher its faded the whole nu away if you can retrieve the nu for me be appreciated thanx

Similar Messages

Putting PVDMs in NM-2V / VIC-2FXO / VIC-2FXS into DSP farm

I have a Cisco 2650XM router with an NM-2V module with one VIC-2FXO and one VIC-2FXS card in it. I'm very new to Cisco voice stuff and want to get started with it. I'm trying to pool the PVDMs on this router into a DSP farm so that they can be used in CME 4.1 with call conferencing / transcoding / VoIP calls between Cisco IP Communicator and Cisco VoIP physical phones but I'm having issues doing so. I believe I'm supposed to create a DSP farm by going into "voice-card X" mode and assigning them to the DSP farm?
I know that there are PVDMs present because they are listed when I do a "show voice dsp detail." I'm not sure if the PVDMs are present in the NM-2V module or actually on the VICs. Can someone offer advice?

Yeah, the only cards / modules that I have in the router are the NM-2V, VIC-2FXO, and VIC-2FXS. Here is the "show diag" output as well as some other ones that may be useful.
Press RETURN to get started!
*Mar 1 00:00:05.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Mar 1 00:00:25.281: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Mar 1 00:00:25.970: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:00:25 UTC Fri Mar 1 2002 to 17:00:25 AZT Thu Feb 28 2002, configured from console by console.
*Mar 1 00:00:26.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
*Mar 1 00:00:27.873: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 4 02:05:04.149: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(15)T14, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 17-Aug-10 05:40 by prod_rel_team
*Jan 4 02:05:04.153: %SNMP-5-COLDSTART: SNMP agent on host KINASE is undergoing a cold start
*Jan 4 02:05:04.322: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jan 4 02:05:04.322: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jan 4 02:05:05.435: %LINK-3-UPDOWN: Interface Foreign Exchange Office 1/0/0, changed state to up
*Jan 4 02:05:05.435: %LINK-3-UPDOWN: Interface Foreign Exchange Office 1/0/1, changed state to up
*Jan 4 02:05:05.439: %LINK-3-UPDOWN: Interface Foreign Exchange Office 1/1/0, changed state to up
*Jan 4 02:05:05.439: %LINK-3-UPDOWN: Interface Foreign Exchange Office 1/1/1, changed state to up
CNF-FILES: Clock is not set or synchronized, retaining old versionStamps
CNF files update complete (post init)
KINASE>en
KINASE#show diag
Slot 0:
C2650XM 1FE Mainboard Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision        : 3.0
PCB Serial Number       FFFF
Part Number              : 73-7755-04
RMA History              : 00
RMA Number               : 0-0-0-0
Board Revision           : A0
Deviation Number         : 0-0
Product (FRU) Number     : C2650XM-1FE
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 6E 41 03 00 C1 0B FF FF FF 46 46 46
0x10: 46 FF FF FF FF 82 49 1E 4B 04 04 00 81 00 00 00
0x20: 00 42 41 30 80 00 00 00 00 FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 1:
4 PORT Voice PM for C2600 Port adapter
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 1.1                   Board revision H0
Serial number     26333860            Part number    800-02491-02
FRU Part Number     NM-2V=
Test history      0x0                   RMA number     00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 65 01 01 01 91 D2 A4 50 09 BB 02 00 00 00 00
0x10: 88 00 00 00 01 06 27 17 FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF
VIC Slot 0:
FXO Voice daughter card (2 port)
Hardware revision 1.1                   Board revision J0
Serial number     21522658            Part number    800-02495-01
Test history      0x0                   RMA number     00-00-00
                                  Connector type    Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0D 01 01 01 48 68 E2 50 09 BF 01 00 00 00 00
0x30: 98 00 00 00 00 07 22 01 FF FF FF FF FF FF FF FF
VIC Slot 1:
FXO Voice daughter card (2 port)
Hardware revision 1.1                   Board revision J0
Serial number     22783161            Part number    800-02495-01
Test history      0x0                   RMA number     00-00-00
                  Connector type    Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0D 01 01 01 5B A4 B9 50 09 BF 01 00 00 00 00
0x30: 98 00 00 00 00 11 16 01 FF FF FF FF FF FF FF FF
KINASE#sh voice dsp detail
DSP DSP                DSPWARE CURR BOOT                         PAK     TX/RX
TYPE NUM CH CODEC       VERSION STATE STATE   RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ========== ===== ======= === == ========= == ===== ============
C542 001 01 None          9.4.7 IDLE idle      0 0 1/0/0     NA     0      602/623
C542 002 01 None          9.4.7 IDLE idle      0 0 1/0/1     NA     0      593/590
C542 003 01 None          9.4.7 IDLE idle      0 0 1/1/0     NA     0      601/622
C542 004 01 None          9.4.7 IDLE idle      0 0 1/1/1     NA     0      593/590
KINASE#sh dspfarm
DSPFARM Configuration Information:
Admin State: DOWN, Oper Status: DOWN - Cause code: ADMIN_STATE_DOWN
Transcoding Sessions: 0(Avail: 0), Conferencing Sessions: 0 (Avail: 0)
Trans sessions for mixed-mode conf: 0 (Avail: 0), RTP Timeout: 600
Connection check interval 600 Codec G729 VAD: ENABLED
KINASE#config t
Enter configuration commands, one per line. End with CNTL/Z.
KINASE(config)#voice-card ?
<0-1> Voice interface slot #
KINASE(config)#voice-card 0 ?
% Unrecognized command
KINASE(config)#voice-card 0?
% Unrecognized command
KINASE(config)#voice-card 0?
% Unrecognized command
KINASE(config)#voice-card 0/?
% Unrecognized command
KINASE(config)#voice-card 0
                          ^
% Invalid input detected at '^' marker.
KINASE(config)#voice-card 1
                          ^
% Invalid input detected at '^' marker.
KINASE(config)#
KINASE(config)#voice-port 1/0/0
KINASE(config-voiceport)#?
Voice-port configuration commands:
battery-reversal     Enable FXO battery-reversal detection
bearer-cap           Specify the bear capability
busyout              Configure busyout trigger event & procedure
comfort-noise        Use fill-silence option
connection           Specify Trunking Parameters
cptone               Configure voice call progress tone locale
default              Set a command to its defaults
description          Description of what this port is connected to
dial-type            Configure type of dialer for voice
disc_pi_off          close voice path when disconnect with PI received
echo-cancel          Echo-cancellation option
exit                 Exit from voice-port configuration mode
impedance            Specifies the terminating impedance of the interface
input                Configure input gain for voice
music-threshold      Threshold for Music on Hold
no                   Negate a command or set its defaults
non-linear           Use non-linear processing during echo cancellation
output               Configure output attenuation for voice
playout-delay        Configure voice playout delay buffer
pre-dial-delay       FXO Pre-dial Delay
ring                 Number of rings
shutdown             Take voice-port offline
signal               The signaling type for the interface FXS or FXO
snmp                 Modify SNMP voice port parameters
station-id           Configure station ID
supervisory          Configure answer + disconnect supervision options
threshold            Threshold [noise] for voice port
timeouts             Configure voice timeout parameters
timing               Configure voice timing parameters
translate            Translation rule
translation-profile Translation profile
trunk-group          Configure interface to be in a trunk group
voice-class          Set voiceport voice class control parameters
KINASE(config-voiceport)#
Looks like the "voice-port" command works, but not the "voice-card" command.

Translation Pattern not working

Hi,
i got a wierd issue.
we have 2 TP, one 8122575 (has a full DDI coming in chelmsford) and one 8151198 (has a full DDI coming in stafford)
chelsmford and stafford are 2 different locations.
the partition/css are the same for both TP.
the Called Party Transform Mask is an external number and it pre-dial 9
if i dial from external phone to the full DDI in chelmsford, i end up on the external number so it works ok
if i dial from external phone to the full DDI in stafford, it goes nowhere ...
i checked the css but cant see any reason why chelmsford tp reaches to chelmsford gw and goes isdn and why stafford does nothing
any idea?
thanks
cucm 7.1.5

Hi,
Have you tried testing the call with Dialed Number Analyzer? I find that's a fantastic and often-overlooked tool for this kind of issue. If DNA shows the call will not route, it's probably a CSS issue for the Stafford gateway. If DNA shows the call will route, then it's probably a dial-peer issue on the Stafford gateway.
-Jameson

RightFAX 9.4.0.239 - FAC authorization codes problem

Hi community,
I'm running a cisco RightFAX server and I would like to use the FAC (authorization codes) for my outgoing faxes.
I can successfully send a fax to an external extention 9123456789 for instance.
But If I try to add a FAC after my extention, it doesn't works.
Ex :
Route pattern for FAC = 9
Dialed number = 123456789
FAC code = 12345
9123456789#12345#
My issue concern (I think) the pause after the first '#'. My faxserver is configure with a H323 link to the CUCM8.
I already tried to add a 1 second pause with the character ",". But without success.
I also tried with 2 ,3, 4 seconds.
Does anyone has already successfully archieved an outgoing fax with FAC ?
Could we configure digit overlap in order to send the digits one by one ?
With my ipphone 7942 I have the same issue.
If I Pre-dial 9123456789#12345# and then press the speaker/line button. The call fails.
If I first press the speaker/line button and then dial the extention, it works fine.
Help would be really appreciated.
Thanks
mat

Matthieu,
I'm not aware if rightfax supports sending DTMF tones after the call is in a proceeding/connected state. In most instances, the FAC digits need to be sent after the call is established. If the digits are sent with the called party number then CUCM/IOS will treat them as part of the called number.
This questions is best if redirected to Rightfax support to have them explain if DTMF can be sent after the call is connected/established.

Pre-programmed Speed Dial

Does anyone know how to delete the pre-prgrammed speed dial entries in the Tour. That would be speed dial letters A, Q and W?

Check this thread
http://supportforums.blackberry.com/rim/board/message?board.id=9630&message.id=2118&query.id=2333197...
Here is the summary
Press Green Call Send button
Press BBerry Menu Key
Go to View Speed Dial List
Press the letter entry you want to change (A, Q, or W )
Press the Enter button
You'll now be able to select a new contact for that location from the contact list that comes up.

Does password lock Bluetooth dial-out on Pre?

Hi,
I currently have a Treo 700P and am interested in the Pre.
One thing that annoys me to no end with the Treo, is that
if I have a password set, my Bluetooth hands-free
cannot dial out without me entering the password
on the phone. That renders the hands-free essentially
useless.
If I have paired the phone and the hands-free unit
with a bluetooth passcode, that, in my opinion,
should be sufficient authentication.
Does anyone know if Palm has fixed this problem on the Pre?
Post relates to: Treo 700p (Sprint)

I feel the passcode is best. If you are worried about your notes, then you should be worried about everything. You don't care that somebody can go to any site you have logged into and had it remember your password? You are not worried about them making calls? You are not worried about them having full access to your email accounts?
If a lock was provided for the notes, then why stop there, add a lock to every application.
You do know you can set a delay on the passcode lock right? You don't have to enter it every time you go to use the phone. You can make it just lock after x amount of time of non-use. For me, I have that set at 5 mins. So if I get a txt, I unlock, reply. Lock screen put in pocket. Friend replies like a minute later, I don't have to enter code again as it was under 5 mins since I locked it. To me that is good enough to not be annoyed by having to do it everytime but know it will lock in time so no one person can really gain access once it is idle for a bit.

EZVPN public internet split tunnel with dialer interface

I have a job on where I need to be able to use EZVPN with split tunnel but still have access to an external server from the corporate network as the external server will only accept connections from the corporate public IP address.
So I have not only included the corporate C class in the interesting traffic but also the IP address of the external server.
So all good so far, traffic for the corporate network goes down the tunnel as well as the IP address for the external server.
Now comes the problem, I am trying to send the public IP traffic for the external server out of the corporate network into the public internet but it just drops and does not get back out the same interface into the internet.
I checked out this procedure and it did not help as the route map counters do not increase with my attempt to reach the external router.
http://www.cisco.com/c/en/us/support/docs/security/vpn-client/71461-router-vpnclient-pi-stick.html
And to just test the process, I removed the split tunnel and just have everything going down the tunnel so I can test with any web site. I also have a home server on the network that is reached so I can definitly reach into the network at home which is the test for the corporate network I am trying to reach.
Its a cisco 870 router and here is the config
Router#sh run
Building configuration...
Current configuration : 4617 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
logging message-counter syslog
enable secret 5 *************************
enable password *************************
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.3
ip dhcp excluded-address 192.168.1.4
ip dhcp excluded-address 192.168.1.5
ip dhcp excluded-address 192.168.1.6
ip dhcp excluded-address 192.168.1.7
ip dhcp excluded-address 192.168.1.8
ip dhcp excluded-address 192.168.1.9
ip dhcp excluded-address 192.168.1.111
ip dhcp pool myDhcp
network 192.168.1.0 255.255.255.0
dns-server 139.130.4.4
default-router 192.168.1.1
ip cef
ip inspect name myfw http
ip inspect name myfw https
ip inspect name myfw pop3
ip inspect name myfw esmtp
ip inspect name myfw imap
ip inspect name myfw ssh
ip inspect name myfw dns
ip inspect name myfw ftp
ip inspect name myfw icmp
ip inspect name myfw h323
ip inspect name myfw udp
ip inspect name myfw realaudio
ip inspect name myfw tftp
ip inspect name myfw vdolive
ip inspect name myfw streamworks
ip inspect name myfw rcmd
ip inspect name myfw isakmp
ip inspect name myfw tcp
ip name-server 139.130.4.4
username ************************* privilege 15 password 0 *************************
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group HomeFull
key *************************
dns 8.8.8.8 8.8.8.4
pool SDM_POOL_1
include-local-lan
netmask 255.255.255.0
crypto isakmp profile ciscocp-ike-profile-1
match identity group HomeFull
client authentication list ciscocp_vpn_xauth_ml_1
isakmp authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-template 3
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set security-association idle-time 1740
set transform-set ESP-3DES-SHA
set isakmp-profile ciscocp-ike-profile-1
crypto ctcp port 10000
archive
log config
hidekeys
interface Loopback10
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description TimsInternet
ip flow ingress
ip policy route-map VPN-Client
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 3
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Virtual-Template3 type tunnel
ip unnumbered Dialer3
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip inspect myfw in
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
ip tcp adjust-mss 1372
no ip mroute-cache
hold-queue 100 out
interface Dialer0
no ip address
interface Dialer3
ip address negotiated
ip access-group blockall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp header-compression
ip policy route-map VPN-Client
no ip mroute-cache
dialer pool 3
dialer-group 1
no cdp enable
ppp chap hostname *************************@direct.telstra.net
ppp chap password 0 *************************
ip local pool SDM_POOL_1 10.0.0.10 10.0.0.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer3
ip http server
ip http authentication local
no ip http secure-server
ip nat inside source list 101 interface Dialer3 overload
ip access-list extended VPN-OUT
permit ip 10.0.0.0 0.0.0.255 any
ip access-list extended blockall
remark CCP_ACL Category=17
permit udp any any eq non500-isakmp
permit udp any any eq isakmp
permit esp any any
permit ahp any any
permit tcp any any eq 10000
deny ip any any
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 101 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
route-map VPN-Client permit 10
match ip address VPN-OUT
set ip next-hop 10.0.0.2
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
password cisco
scheduler max-task-time 5000
end
Router#exit
Connection closed by foreign host.

Thanks for the response.
Not sure how that would help as I can connect into the internal network just fine, but I want to hairpin back out the interface and surf the internet from the VPN client. The policy route map makes the L10 the next hop and it has NAT.

OFFICIAL Feature/Fix suggestions for Palm Pre

I invite all those who have suggestions to Palm about making the Pre even better... please do so here.
Here are the sugestions so far:
More launcher pages
Better EAS (exchange activesync) support (for added security policies)
Red button and back key to move backwards (without deleting)
Notifications control/selection
Copy and paste in emails/text/calendar
Search in emails and calendars and web browser
Better syncing directly with outlook
Visual Voicemail
Control which contacts are synced from different apps/websites
D-pad?
Mass text/email delete
SMS text count
Visual notification when screen is off
Improve bluetooth file/contact transfering
Options for vibrate and sound notifications (including when display is off) for each app/system event
Text prediction
Text message forwarding
A phone/text only mode (to save battery)
Contact filter tags
Virtual Keyboard
MP3 Ringtone startpoint edit
Mark all emails as read
Add birthdays to calendar from contacts
WPA/WPA2 w/ TTLS-PAP support
Touchscreen sensitivity calibration
Symbol key to work in web browser
File Manager w/ search
Spell checker
Easier way to highlight text
Adobe Flash (which i believe is in progress)
Timer/Stop watch
Better alarm clock and event reminder snooze options
Ability to send tasks, memos, contacts, etc. via bluetooth
Previous/Pause controle for music from lock screen
Voice Dial
More inclusive universal searching
Support for podcast auto-resume
Text forwarding
While viewing photos have the option of turning off accelerometer
Proxy support with WiFi
Vibrate length/power options
Auto-hide in launcher for less used apps
Landscape mode for viewing email
Fix Alarms bugs (alarm not going off when warning is up or when screen is off, alarm goes off on weekends when weekdays is set)
Off-line browser viewing
Ability to turn off callerID pics
Way to easily tab within browser
Sliding bar for play locator in media player
Bookmarks for media player
Ability to schedule repeating tasks
Option for delete confirmations within emails
Option to turn off screen while on touchstone
Option to turn off notification sound when charging or ignoring a phone call.
Post relates to: Pre p100eww (Sprint)
Update 6/18: I have directed this thread to a manager of Palm's technical team, he advised me that many of these suggestions were forwarded to the development team and most are being worked on/considered. He also confirmed that an update is coming over the next couple weeks that will fix a few issues including the SSL issue with EAS... and there is another update that will fix the MSFP issues (security policies) with EAS email (in around 60 days) It's good to hear that Palm is very responisive to our needs and suggestions.
Update 7/11: Since this thread has received so much attention and ideas I have not been able to post all the different suggestions on this front page. I have put this forum thread in front of several sprint/Palm employees that do have a say in future updates... so please keep posting suggstions! Please also use the link below. Thanks!
Feel free to add your request/reccomendation here... Palm's official feedback form: http://www.palm.com/feedback/
Message Edited by gregdep on 07-11-2009 11:25 AM

Thanks... fixed and updated with visual voicemail

How to enter a contact's ext. # without auto-dialing it?

Is there a way to enter the extension for a contact's phone number when the company's phone system doesn't accept automated extension dialing? I used the proper procedure for adding an extension, but the switchboard operator picked up the phone as the extension was being dialed (after a pause), and she said I can't pre-program the extension. She said I have to call the main number and tell the operator the extension I want and then she'll connect me. I tried other methods of entering the extension without the pause technique, but I can't get "contacts" to accept it. Any tips? I just want to be able to list the person's extension next to their phone number for easy reference. Thanks in advance.

Same boat here -- lots of professional contacts who don't have automated extension dialing.
It appears the only solution is to save extension numbers in the Notes section, first line. Depending on how much info you have in the fields above, it may or may not appear without having to scroll down.
Hope that helps.

Dial-up no longer works after update to 10.5.8

I was running 10.5.6 on an Intel Mac, using an external modem on dial-up service. (Nothing else is available here.) Today I got access to a Wi-Fi network and installed the combo update to 10.5.8, along with some other updates. All worked fine. When I reconnected at home, my dial-up modem - an Apple (v.92) will no longer connect. I get the dial tone, the number dials, then the usual modem noise, then it disconnects, with the message (Unable to negotiate a connection. Check your settings and dial again."
I spent an hour on the phone with my ISP and we could not solve the issue. Eventually they said it must be an Apple issue. Any ideas?

Hello, Emir,
I'd suggest you ask again in the MacBook Pro forum. This forum is intended for old, pre-PowerMac G3 hardware and so not the most likely place to get a quick and applicable response.
Regards.

Help with Remote access VPN on Cisco router 3925 via Dialer Interface

Hi Everybody,
I need help for my work now, I appreciate if someone can fix my problem.I have a Cisco router 3925 and access Internet via PPPoE link. I want config VPN Remote Access and using software Cisco VPN client. But it doesn't work.. Here my config router :
HUNRE#show running-config
Building configuration...
Current configuration : 5515 bytes
! No configuration change since last restart
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname HUNRE
boot-start-marker
boot-end-marker
enable secret 5 $1$vEFw$rLfvLglzUgddCVwXDx03K.
enable password cisco
aaa new-model
aaa session-id common
crypto pki trustpoint TP-self-signed-1050416327
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1050416327
revocation-check none
rsakeypair TP-self-signed-1050416327
crypto pki certificate chain TP-self-signed-1050416327
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31303530 34313633 3237301E 170D3134 30393235 31313534
31395A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30353034
31363332 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100CC79 74FCFABE 81183B70 5A9F4A53 EB609754 7D5F8587 9150B76E 3207A86E
5B65F9E9 6CDAC21A 6D69221D 1FF61632 14763308 43B2A1CC 8EE5ABAC EF07530E
3F0D35FE F08C955B 60B52B92 F8F54D53 DD6DD623 01F83493 02F9C49A F0C3483D
3B48A008 8D96700E 88924BFE DE00201B DE5965DE 32898CAD 9012AB55 76B6F39B
2D470203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14C3418C BC35F3D9 B26B2475 2BB5F826 060525AB B3301D06
03551D0E 04160414 C3418CBC 35F3D9B2 6B24752B B5F82606 0525ABB3 300D0609
2A864886 F70D0101 05050003 81810070 AC7C26C6 4606A551 1A3FD6C5 2A5AEAE8
35DAC86E F8885E26 51F6EEAE 7565D3AA D532C8F3 55F6656F D103F38C 8FBDE7F1
83E77143 76469040 7FEA41E8 14963DB3 F7F28EA0 C5F2F42C B186B75C AAB04900
15F9CB38 A16964F5 4E7B4378 35041AA8 AE8EC181 D58D6A62 676E286A 7B9D80E6
35A0B9FB FB76E976 3D2A19D7 006078
        quit
ip name-server 210.245.1.253
ip name-server 210.245.1.254
ip cef
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group 1
vpdn-group 2
license udi pid C3900-SPE100/K9 sn FOC1823839B
license boot module c3900 technology-package securityk9
username cisco privilege 15 secret 5 $1$aAjB$D3iLyPFTE7O1bHPnKSJcH0
username kdhong privilege 15 secret 5 $1$nfyX$FO1BPTabCUaE6uKQwpLT.1
redundancy
track 1 ip sla 1 reachability
track 2 ip sla 2 reachability
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group VPN-HUNRE
key hunre
dns 8.8.8.8
domain hunre
pool IP-VPN
acl 199
max-users 100
crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map DYNMAP 1
set transform-set encrypt-method-1
crypto map VPN client configuration address respond
crypto map VPN 65535 ipsec-isakmp dynamic DYNMAP
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip mtu 1492
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
duplex auto
speed auto
interface GigabitEthernet0/1
description FPT
no ip address
ip tcp adjust-mss 1412
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface GigabitEthernet0/2
description Connect to CMC
no ip address
ip mtu 1442
ip nat outside
ip virtual-reassembly in
ip tcp adjust-mss 1412
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 2
no cdp enable
interface Dialer1
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [USERNAME]
ppp chap password 0 [PASSWORD]
ppp pap sent-username [USERNAME] password 0 [PASSWORD]
ppp ipcp dns request
crypto map VPN
interface Dialer2
description Logical ADSL Interface 2
ip address negotiated
ip mtu 1442
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1344
dialer pool 2
dialer-group 2
ppp authentication chap pap callin
ppp chap hostname [USERNAME]
ppp chap password 0 [PASSWORD]
ppp pap sent-username [USERNAME] password 0 [PASSWORD]
ppp ipcp address accept
no cdp enable
ip local pool IP-VPN 10.252.252.2 10.252.252.245
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source list 11 interface Dialer2 overload
ip nat inside source static 10.159.217.10 interface Dialer1
ip nat inside source list 199 interface Dialer1 overload
ip nat inside source static tcp 10.159.217.10 80 210.245.54.49 80 extendable
ip nat inside source static tcp 10.159.217.10 3389 210.245.54.49 3389 extendable
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.159.217.0 255.255.255.0 192.168.1.8
ip sla auto discovery
ip sla responder
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
access-list 10 permit any
access-list 11 permit any
access-list 101 permit icmp any any
access-list 199 permit ip any any
control-plane
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
transport input all
line vty 5 15
password cisco
transport input all
scheduler allocate 20000 1000
ntp master
end
However, I cannot ping interfac Dialer 1. I using Cisco vpn client software ver 5.0.07.0290.
Hopeful for your answers !
Thanks

Hi David Castro,
Thanks for your answer,
I configed following your guide, but it have not worked yet. I saw that I cannot ping IP gateway Internet . I using ADSL Internet and config PPPoE and my router receive IP from ISP. Here show ip int brief :
GigabitEthernet0/0         192.168.1.1     YES NVRAM up                    up
GigabitEthernet0/1         unassigned      YES NVRAM up                    up
GigabitEthernet0/2         unassigned      YES NVRAM up                    up
Dialer1                    210.245.54.49   YES IPCP   up                    up
Dialer2                    101.99.7.73     YES IPCP   up                    up
NVI0                       192.168.1.1     YES unset up                    up
Virtual-Access1            unassigned      YES unset up                    up
Virtual-Access2            unassigned      YES unset up                    up
Virtual-Access3            unassigned      YES unset up                    up
But I cannot ping Interface Dialer 1, so may be VPN is does not worked. Do you have some ideal ?
Thanks very much !

N80 How do you configure a dial up account?

On my SE p800 I could create a dial up account as the equivalent of an Access Point on the N80.
Is it possible to add a normal dial up internet account as an access point?
or do you have to use WLAN or a pre defined access point
such as 'O2 MobileWeb' that uses 3g or GPRS.
Nick
Phone List: (in order of appearance)
Nokia 101 (remember them?), Ericsson 388, Nokia 7110, Ericsson t39, Sony Ericsson p800, Nokia N80, HTC TYTNII, HTC HD2, Nokia Lumia 920

18-Aug-2006
01:48 PM
rufao wrote:
if you create the access point as specified above - you can tell the phones email client to use it.
so when you try to pick up your email it will use this connection. to do this, when you set up the email client the wizard will lead you all the way through. at the end it will ask you what access point you want to use, just pick the dial up one you create.
no, whenever you go to pick up email the phone will always dial it.
I have done this on an existing account so it only refreshes my email over WLAN.
Unfortunately my problem still stands,
there is no option to select GSM as a data bearer when I create the access point.
Nick
Phone List: (in order of appearance)
Nokia 101 (remember them?), Ericsson 388, Nokia 7110, Ericsson t39, Sony Ericsson p800, Nokia N80, HTC TYTNII, HTC HD2, Nokia Lumia 920

Contact bug : contact phone numbers in edit mode are not shown in "dial" mode

Contacts can have seemingly unlimited phone numbers as seen in the contact edit mode, though very few are shown in the corresponding non-edit mode. Of course, Dialing is not supported in the edit mode.
I have found that contacts that include pause characters or block characters are not properly displayed in the contact "dial mode". If you every try a conference call service, this is important to you.
At&t uses the comma as a pause, and Verizon uses the letter "t" as a pause. *82 temporarily blocks your caller id. Somehow the WebOS software that chooses which items to allow me to dial has bugs and worse, there is no clear way to prioritize so I am completely at the whim of the software.

I have tested entering 12 phone numbers on my own Pre Plus and all the numbers display in the normal contact field. How many phone numbers are you trying to to display?
The dialing options on the Palm Pre Plus are as follows:
To insert a two-second pause in the dialing sequence, enter a T where you want the pause to appear. To add a + symbol in the dialing sequence for international dialing, press and hold 0 (zero) in the location where you want the + symbol to appear. To insert a stop in the dialing sequence, enter a P where you want the stop to appear; to dial the next set of numbers after the stop, tap the screen.
As far as 3rd party special dialing character entry you would need to check with the 3rd party on how to enter this information into you device for your conference calling service.

Voice dialing + lack of BASIC features and company communication

i beleive palm has managed to make an amazing operating system, ive never been able to manage notifications and apps so easily but the pres lack of features has been enough to get me to sell my pre to someone else that might just be coming off a non smart phone, and wants a beginner smartphone. the decision to switch does bother me but does palm have any plans in the near future to adress the lack of voice dialing? the lack of communications with future plans is aslo a mojor let down. given palms current state, i dont understand why theres no assurance to new and existing customers that palm is actually working on anything to add these features or what they plan to do in the future?! i will actually be making a switch from the palm very soon. ive used the htc hero before i came to palm and find the hero to be ten times more useful with alot more useful applications. shopsaavy is something that has saved me a great deal of money during the time that i was using it (probably enough to pay for the price of the phone) voice dialing makes it 10 times easier to keep from veering off the road when you have to make that important call to your employer to let them not your running late. though the operating system is amazingly well put together, its lack of features is what has me switching to android. dont get me wrong, i have nothing against palm themselves, i beleive you all are doing all that you can do to stay afloat and i wish palm the best....it just sucks that i wont be one of the customers helping palm do that.

Hello and welcome to the forums;
First, I'm glad to hear that you are enjoying your Pre, and hope that you will stick with us for everything that is coming. With that said, we don't even get advance notice of what 'new' is coming until it hits the public view. It all has to do with confidential information and NDA's. I hope you can understand why some things are kept secret until official launch dates are nailed down, and until all testing on new features is finished.
Voice dialing has been requested several times here in the forums, and our only recommendation is to make the request to our developers at www.palm.com/feedback where those in charge of making changes look for customer requests and ideas for new features.
Hope this helps,
TreoAide

"Call back" dial up internet? Help!

Hello and help! I'm in Ukraine trying to use dial up internet in my apartment. Dial up in Ukraine is done by buying a card that provides you with a pin code that you use to make an account with a third party provider. The time you spend on the itnernet is "pre paid" in essence and when you run out of time
you buy a new card and scratch off a new code.
There are two ways to connect. The first is to dial straight into their server from your computer/phone line (which means you have to pay for the phone time since you're the one who dialed out and this can get expensive). The second option is called "call back." "Call back" meands my computer dials the company then the company dials me right back with an internet connection that I start using. I have been trying to get call back set up for days and
have not succeeded. HELP!
The name of the service I am using is called Superweb (ww.superweb.com.ua/eng). I am trying to dial the 251 1212 number. I am using pulse setting. The error message I'm getting is "Could not negotiate a connection with the remote PPP server. Please verify your settings and try again."
The directions which the company normall gives to PC users are to go into "network" settings, go to "advanced", then "dial up preferences," check off "callback" and then type in the number (not sure if they mean the number I'm calling 215 1212 or my land line number but easy enough to try both).
Please, please help me solve this. Where is the call back option on a mac?
Thanks. I can't wait to hear from you.
More technical details: I have the first generation of the white 12 inch iBooks. I am running Tiger (no updates just original version).

hi ,
access the setup page of the router using http://192.168.1.1 "admin" is the password....go to the wireless section and then to advanced wireless settings.....
turn "off" the AP isolation...reduce the Beacon interval to 50 and reduc the RTS and fragmentation threshold by 40 each....
let me know if this works.

Pre dial # or *

Similar Messages

Maybe you are looking for