Pre-Download Software APs - NCS - WLCs - APs

Hello,
In my environment i have 5 controllers in a central site controlling a lot of Access Points in a lot of places around the city.
In theses places the Accesss Points are working with H-REAP and the link that connect the central site and the branch offices is a 2MB MPLS.
I need to upgrade my controllers, but i have one question, if i put the new software in my controllers creating a New Download Software Task in the NCS and select the option Pre-Download Software APs.
Will the controller try to upgrade all the Access Points associated at once or It will be upgrade one-by-one ?
Thanks.

It's not all at once.
The maximum number of concurrent predownloads is limited to half the number of concurrent normal image downloads. This limitation allows new access points to join the controller during image downloading.
If you reach the predownload limit, then the access points that cannot get an image sleep for a time between 180 to 600 seconds and then reattempt the predownload.
Once you go to 7.2 code you can have a master AP that gets the upgrade first and then sends the update to the other APs in the same FlexConnect (HREAP) group.

Similar Messages

Pre-download software to APs with version not on current controller

I am migrating APs from a WiSM running 7.0 to a 5508 that is running 7.4 but I can't find a way to get the 7.4 code pre-downloaded on the APs while they are connected to the WiSM. We're a 24 hour environment so I'm guessing I'll have to migrate one at a time to avoid downtime for users but before planning on this route, which is a pain, I thought I would see if others have found a way to do this.

Hi,
it's quite easy, I've done this some days ago.
I've followed this guide http://goo.gl/loHK1W but, in short, you have to do this:
- download the file 7.4 on WiSM like you do when you want to update it's software (from web gui, under Commands > Download File > Code);
- when done, don't reload the WiSM and issue this command from cli: config boot backup. "This ensures that if a system failure occurs, the controller boots with the last working image of the controller"
- pre-download the new code on APs using the command: config ap image predownload primary <AP-NAME>. You can verify the progress using the command: show ap image all
- when done, change the High Availability configuration on that AP (from web gui, under Wireless > Access Point, then click your AP) and set the 5508 as Primary Controller, then Apply and reload the AP.
Obviously, I suggest you to test this on a non-critical AP :)
Best regards,
Matteo

I can't able to download my aps from I tunes, cause my apple ID is disabled, may I know how to re-activate my apple ID

I can't able to download my aps from I tunes, cause my apple ID is disabled, may I know how to re-activate my apple ID

Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I live in Canada but spend 4 months a year in USA. Under iTunes agreement I can't download new aps while I am in USA My question is Can I update aps that I already have downloaded?

I live in Canada but stay in the USA 4 months a year. Under the iTunes agreement I can't download new aps while in the U S A. My question is - can I download upgrades to the aps I have that we're downloaded in Canada?

Yes. I do that when I am in Canada.

Why am I asked to enter a credit card even when trying to download 'free' aps?

Why am I asked to enter a credit card number even when trying to download 'free' aps!?

Because corporate standards "assume" you will eventually buy a $200 application.
Try this for getting an account you can "add to with gift cards" if you need to pay for something ...
http://support.apple.com/kb/ht2534

Issue in image pre-download

Hi.
I tried to need upgrade firmware of WLC to 7.6.00.To avoid long hour outage, I was using image pre-download firmware upgrade method to all access points.There are 99 AP in total & one site has issues 5 Aps. There are 13 x 3600 APs in this site. Out of 13, 5 x APs are not able to push new firmwareFrom my troubleshooting, I found that when I start pushing new firmware to AP, Secure tunnel between WLC and AP drops.
Please guide me to resolve this issue.
Thanks

Hi Scott,
Please see below output
show flash:
Directory of flash:/
    2 -rwx       70825 May 29 2013 02:18:31 +00:00 event.log
    3 drwx           0   Mar 1 1993 00:00:12 +00:00 configs
    4 -rwx         280 Apr 24 2014 05:17:21 +00:00 lwapp_officeextend.cfg
    5 -rwx       29996 Apr 28 2014 13:24:13 +00:00 lwapp_non_apspecific_reap.cfg
    6 -rwx       95008 Apr 24 2014 05:17:24 +00:00 lwapp_reap.cfg
    7 drwx         832 May 29 2013 00:23:41 +00:00 ap3g2-k9w8-mx.152-2.JA1
   46 -rwx          64   Mar 1 1993 00:00:34 +00:00 sensord_CSPRNG0
    9 drwx         192   Dec 4 2012 05:00:01 +00:00 ap3g2-rcvk9w8-mx
   47 -rwx          64   Mar 1 1993 00:00:35 +00:00 sensord_CSPRNG1
   48 -rwx         230 Apr 24 2014 05:17:20 +00:00 env_vars
   49 -rwx       60760 Apr 24 2014 05:14:40 +00:00 event.capwap
   51 -rwx        7192 Apr 28 2014 14:04:59 +00:00 private-multiple-fs
31997952 bytes total (13533184 bytes free)

Free up LWAPP memory prior to pre-download of upgrade image.

Hi,
We are looking for a way to automate the freeing up of LWAPP memory space in order to make way for a pre-download of 7.6.110.0 before the final upgrade of the WLC (8500).
There's around 900 APs so doing it manually is undesirable.
Also, a way to report on the APs that are short of space would be very useful too.
Prime Infrastructure is also installed on the network.
Any ideas appreciated.
Phil Ray

802.11n AP and newer have more than enough flash capacity to store two or more IOS (except for 1250).
If you have 802.11 a/b/g, such as 1130 and 1240, there's nothing you can do.

Install downloaded software other than on C: drive

I purchased this morning and downloaded the latest 64 bit version of Elements and Premiere to my E: drive (C: drive has Windows Ultimate 7 64 bit only).
I have six files downloaded - one Application file and 7zArchive file set each for Photoshop Elements, Premier Elements and Premiere Elements Content.
When I ran the Application file for PSE it installed OK - mostly on the E: drive where I directed the install browser - but also put a large number of files on my C: drive under a Program Data directory.
When I run the Premiere Elements Application file it will not install and produces an error message along the lines of 'insufficient space or admin rights'.
I am guessing that as there is now only 3GB free on the C: drive this is why I am getting the failed install (I have the admin rights).
So how can I install the whole - or majority of files - on the E: drive where there is 83GB free?
Any help greatly appreciated.

Thanks for the reply.
That was what I feared.
Might have been helpful for Adobe to publish exactly what space - and where is required - in a pre-download checklist.
I can't think of any other software we have - other than the operating system - which HAS to be on the C: drive.

Pre-Download System Updates to use w/MDT 2012

Is their any way to pre-download these system updates and install them during a deployment using MDT 2012?
Wish to speed up the deployment?
* Im talking about the Updates not the System Update Software, I already have that installed!
Moderator comment: Subject edited for clarity. Was: Pre-Download System Update 5

I assume you're wanting to automatically install drivers?
Download the driver packs for your models from here: http://support.lenovo.com/en/documents/ht074984
Then add them to your deployment. I'm an SCCM guy, not a MDT guy, but this blog post looks like it may be relevant:
http://blogs.technet.com/b/askcore/archive/2013/05/09/how-to-manage-out-of-box-drivers-with-the-use-...

How i able to get back my pre-install software in ...

Hi everyone,
I accidently format my memory card, how i able to get back pre-install software in the memory card??? My phone is E66. Thanks.

download preinstalled softwares from the following link
http://europe.nokia.com/get-support-and-software/product-support/nokia-e66/software
and from here for more softwares.
http://europe.nokia.com/find-products/devices/nokia-e66/downloads
¨Arm yourself because no one else here will save you¨

X300 - removing pre-loaded software

Is there a simple way of finding what pre-loaded software can be deleted to increase hard disc capacity?

You can use the ThinkVantage tool called Base Software Administrator. This can be downloaded from the Admin tools page:
http://www.lenovo.com/thinkvantageadmin
The BSA allows you to de-select which items on the list of pre-loaded apps that you want to remove, then it does a re-installation of the factory image minus the things you chose to take off.
Make sure to read the help files in BSA first before attempting to run it. I would also run a complete backup with Rescue & Recovery first and save the backup to external media so that if I made a mistake with BSA, I could always restore my system from the saved backup.
Message Edited by kr00zn on 08-01-2008 03:57 PM
Message Edited by kr00zn on 08-01-2008 03:58 PM
Message Edited by kr00zn on 08-01-2008 03:59 PM

Drivers from various HP pre-installed software

Hello,
I Have an HP ENVY 6 1040EW Ultrabook.
Because I had issues with my windows system I had to reïnstall windows with disks because a manual factory reset was not possible because of dammaged drivers.
There where no disks for this particular laptop so i had to use normal windows 7 recovery disks.
My problem:
I recovered Windows 7 with my recovery disks and ofcourse my old pre-installed software was not on my PC.
But I really liked HP coolsense, Beats Audio, HP connection manager and the HP service software to store safely my usernames and passwords. But I can't find the software on the HP website.
Tnx for reading and answering my question.
Greetings,
Bart

Hi, Bart:
See if this IDT audio driver from your PC's support page installs the Beats software too.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
Coolsense:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113328-1&cc=us&dlc=en&lc=en...
Connection mgr:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131501-1&cc=us&dlc=en&lc=en...
Unfortunately, I am not familiar with the HP service software you are referring to.

ITunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution?

iTunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution? And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

It would help to know versions here. I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed. Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago. If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses. Anyway, I'm guessing here until we know exactly what you did.

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Where can i found the download software of oracle identity manager 9.1.0.

where can i found the download software of oracle identity manager 9.1.0.1 Remote Manager
. can any one help me.
Edited by: user10545341 on Jul 29, 2011 8:19 AM

And follow the steps to complete your task:
Agents in Active Directory 9.1.0.2
hope this helps,
Thiago L Guimaraes

Pre-Download Software APs - NCS - WLCs - APs

Similar Messages

Maybe you are looking for