Pre-Download System Updates to use w/MDT 2012

Is their any way to pre-download these system updates and install them during a deployment using MDT 2012?
Wish to speed up the deployment?
* Im talking about the Updates not the System Update Software, I already have that installed!
Moderator comment: Subject edited for clarity. Was: Pre-Download System Update 5

I assume you're wanting to automatically install drivers?
Download the driver packs for your models from here: http://support.lenovo.com/en/documents/ht074984
Then add them to your deployment. I'm an SCCM guy, not a MDT guy, but this blog post looks like it may be relevant:
http://blogs.technet.com/b/askcore/archive/2013/05/09/how-to-manage-out-of-box-drivers-with-the-use-...

Similar Messages

Storage system verify or repair failed,cannot download system updates,in ColorSynk found 4 bad profiles, in ITunes I still see my old Apple ID. What I can to do ,please identify it for me.

I have changed my Apple ID and may be anything wrong did with Disk Utility.
So , I could not download system updates by normal way and downloaded them from Apple site via Folx and have them installed thus.
I have tried check out condition of Toshiba disk and got messages of errors.
What can I do in this situation?
In Disk Utility:
Storage system verify or repair failed.
Problems were found with the partition map which might prevent booting.
Problems were encountered during repair of partition map
S.M.A.R.T status verified
In ColorSynk Utility:
Searching for profiles...
Checking 64 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Prosystem ufiles/TealMagentaGold.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
   Tag 'pseq': Required tag is not present.
Verify done - found 4 bad profiles.
In ITunes :
I see my old email as Apple ID
I going to change Lion OS to Mountain Lion OS ,is there any troubles ahead because of problems described above? And how to fix all that ?
Thank you in advance.
Message was edited by: TatianaTia

PS
In Disk Utility all looks so:
Verifying partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were found with the partition map which might prevent booting
Error: Storage system verify or repair failed.Verifying and repairing partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
I will be greatly appreciated for any considerations or advise (*.*)

System Update Repository - Using a lot of disk space

Hi
Looking at the Repository - it seems to be using a lot of space with multiple iterations of similar files
It also appears to be keeping large Setup files as well as the Applications.
Are all these necessary?
Is there anyway to remove them? CAN I delete old files/setup files? (do you need the old version if a new application is present and functioning)
Many thanks

What version of System Update are you running? The bloating of the repositiory was corrected with SU v5, which also redesigned the internals of SU. A side affect is that when V5 is installed, all installation history is lost (from old SU v4). Uninstall your current SU, Reply when YES you see the screen below during uninstall . Install latest SU 5.006.16.
=
This is a boring stale message. Reply yes, it deletes:
c\programdata/lenovo\Systemupdate

How to make system update with "use automatic configuration script" and an URL

Hello,
all our laptop using "use automatic configuration script" with an "accelerated_pac_base.pac" prxy setting.
How can we make system update work with that ?
And no way for us to by pass this proxy settings with
Thanks

I mean there is no general method which is capable of correcting all possible errors found by schema validation.
For example if the validation says it expected to find an <organization> element or a <company> element but it found a <banana> element, there is no way to determine what repair is necessary.
Anyway the requirement is fighting against the way things work in the real world. The purpose of validation is just to find out whether a document matches a schema. If it doesn't, then too bad. Send it back to be fixed or replaced. If you are having a problem because you repeatedly get documents which don't quite match your schema, then you need to train the users to produce valid documents or to give them tools which help them do that.

Downloading system update for MacBook - not

I've been trying to download the update from 10.4.10 to 10.4.11. After a half hour I get the message it has timed out and be sure I'm connected to the net. I am connected. I stay connected via DSL. I opened the Energy Saver control panel and checked to see that all settings are "Never" for the sleep cycle. I don't use that sleep choice. Tried to download an update for Capture 4 and the same thing happened. I paid for that DL and would like to use it. I've never had this non-download problem in 13 years of using Macs. Does anyone know what I can do to fix this so downloads are possible with the MacBook? No DL problem with iBook G4.

No idea if Apple knows about your issue. For OS X Mountain Lion, i believe 10.8.5 is the last OS update we'll see.
You can provide feedback here to Apple.

I can't download system updates

Hi
Ican download apps from the Apple Apps Store but when I try to download system OS updates the downlad speed drops

Does the download continue?

How can I save downloaded iOS system updates when using multiple iPhones

I have multiple iPhones, and every time I want to update them, I have to wait forever for these downloads to transfer. The update downloads, but is not saved so that I can use it for another iPhone, requiring me to download the same file yet again, and again, and again, wasting my time. Any ideas or is this a lost cause?
Message was edited by: Ron Yochum

Not sure about a Mac, but on Windows it does save the file to a location in the users profile area and if the phones are identical (eg: both 3GS) I have been able to copy the file to the location in the other users profile and have it use it to update.

I have windows 7I have downloaded most updates and use no mobile devices just use itunes my pc. what programs can I eleminate as I'm running out of memory?

What itunes/sony programs can I elimnate from my pc if I only use it on my pc? I have no mobile devices and afraid Im have sony, safari browser and other programs on my computer. I routinely down loaded all updates and afraid I have many uneeded programs and also have problems of running out of memory, can somebody help

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Downloading system update finally... hoorah

received a system message saying it would be available 'over the next week'. update came as ota push. phone is in so cal FYI.

Good luck on that one. Some people have gotten it already, and some people like you and I, are still waiting. There is no way of putting an exact date on it. I have seen someone that is in the same city as me get the update already, and I'm left wondering why I don't have it yet. We have to just try to be patient and know that it is coming and will hopefully be here soon. There is an article out there on popherald.com that says it could be out to everyone by this weekend, but I don't know how reliable the source for that article is. I would say just hang in there. It's only a matter of time.

What does happen and what should i do if i accidently close mac while system update?

Because one day I accidently i had to go somewhere while my mac have an update so i shut down the mac.
What should i do because only my window partition(from boot camp) works and not my mac.
When i choose my mac(via holding alt then choosing the partition i want to start), it looks like its starting but then it somehow automaticaly restart.
Please tell me what to do so i can use back my mac partition again.

If its not enough about description of event its more like:
Downloaded system update completed
Restart and installing update
while installing update i shut down my mac by accident
when i try to start my mac partition(boot camp) it restarts auto
then i didnt try to start it again
Should worry?
What should i do

System updates

My Android tablet continues to notify me the following message " couldn't download system update Not enough space available to download " I have deleted my games and I don't use my tablet much. I need help please advise

Hi!, Wanttolead: Welcome, to Forum !. Please, can you indicate, brand, model and Operating System, of your tablet ?.

Thinkvantage System Update 3.14.0031 Failure

T400. Vista
Ran SU and received message notice "Your copy of SU needs to be updated". When I click OK, the download tries to begin, but immediately get error box "system failed to download. Make sure you have an active network connection".
Close.
Next message box "SU failed to install. You can also install from lenovo.com/support."
I downloaded System Update 3.14.0031 and installed. Rebooted and ran getting the same result as above.
Edit: Same problem on a different computer running XP. Must be an issue at lenovo.
Solved!
Go to Solution.

rtb, welcome to the forum,
I also had problems with v3.14.0031 earlier today, it now seems to be working as designed.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Help with automating "System Update"

edit:
please help - who do I contact in Lenovo / IBM to get real help with this ?
this is a corporate project and I need to resolve this as soon as possible.
does anyone from Lenovo actually read this forum?
I've opend a support call in Lenovo's helpdesk (via email) but no reply except an automated one for... like a week.
help! help! help! we don't mind paying for it, we NEED to resolve this.
any help at all would be greatly appretiacted. please point me at the right direction?
sorry for this venting but really, I just need to get a move on this already... :-0
can anyone at all help ?
any idea where I can find more information / expert assistance ?
thanks for any help...
-Shay
Hi,
I've been able to fully automate System Update distribution using Group Policy. this works perfectly.
I am now trying to achive the same functionality using scritps.
the problem: I get quite a few prompts for "License Agreement" - not the "master" initial one, only a few for the different installs.
here's my setup:
1. a local server is the repository.
2. I import a .reg file before installing "System Update" using an automated install.
3. after a restart, a command runs on the local machine.
here are the details:
registry settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Lenovo\System Update]
"LanguageOverride"="EN"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Lenovo\System Update\UserSettings\General]
"IgnoreLocalLicense"="YES"
"DisplayLicenseNotice"="NO"
"DisplayLicenseNoticeSU"="NO"
"ExtrasTab"="NO"
"RepositoryLocation1"="***my internal server here ****"
"RepositoryLocation2"=""
"RepositoryLocation3"=""
"NotifyInterval"="36000"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Lenovo\System Update\UserSettings\Scheduler]
"SchedulerAbility"="YES"
"SchedulerLock"="LOCK"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Lenovo\MND\TVSUAPPLICATION]
*** network drive mapping here, this part works ***
also, I use this command to run the updates:
call "C:\Program Files\Lenovo\System Update\tvsu.exe" /CM -search A -action INSTALL -IncludeRebootPackages 1,3,4 -noicon
I am just about desperate... I would REALLY REALLY appreciate any help, hint etc :-)
Thanks for ...even trying... lol
regards,
Shay
Message Edited by catman2u on 03-18-2008 05:04 AM
Message Edited by catman2u on 03-25-2008 02:41 AM

catman2u wrote:
does anyone from Lenovo actually read this forum?
From the Communiy Rules in the Welcome section....
Objectives of Lenovo Discussion Forums
These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel. This is an informal and public forum, and Lenovo does not guarantee the accuracy of information and advice posted here -- see important Warranty information below.
No amount of ranting is going to get you anything more than you will achieve with a clear exposition of your issue... so you might want to try doing that instead of ranting and assuming that everyone already knows what you know etc etc.
Cheers,
Bill
I don't work for Lenovo

Create a prompt using MDT 2012 in SCCM 2012 OSD task sequence

Hi Experts,
I need some help with SCCM 2012 Task sequence using MDT 2012.
Here is the scenario:I want to build a task sequence where it will propmt whether the technican want to build a new build or refresh. Based on the technicians choice the task sequence will perform specific actions.
We can create the prompt using HTA or VBScript or some otherways.
But the requiremnt for us is to Use ONLY MDT 2012, not any other ways.
Is it possible to do like the above with UDI?
Please can someone shed some light how to do will be great.
Thanks in advance,

Hi,
UDI may achieve what you want. Take a look at the blogs below.
http://blogs.technet.com/b/anilm/archive/2012/06/01/integrating-mdt-2012-rtm-with-configuration-manager-2012-rtm-part-3-creating-and-deploying-a-udi-task-sequence.aspx
http://heinrichandsccm.blogspot.com/2013/04/how-to-setup-and-configure-sccm-2012.html
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Juke Chou
TechNet Community Support

MDT 2012 Suspend Task Sequence Problem

Hi ,
I have been using LTISuspens.wsf without problem in my MDT 2010 and MDT 2010 U1 for a long time. Recently I have create my test MDT 2012 and I have problem with this task.
I have created the new Run Command line cscript.exe "%SCRIPTROOT%\LTISuspend.wsf" in State Restore section. The build and capture TS is stopping correctly and I have the LTISuspend icon on the desktop. After resuming the TS, it going correctly through, running
sysprep, pop in again Set Network Location window, I can see it is running “Apply Windows PE (BCD)” step and then stops. There is message “suspended” and “The task sequence has been suspended true Use the…..”
Any ideas what I am doing wrong?
My customsettings.ini is from MDT 2010 and there they are fine.
I am capturing Windows 7.
Thanks
Vinnie

Hi,
A few suggestions below for each of your issues.
Issue 1 is that you don't see any task sequences in the wizard
- Have you updated your deployment point after upgrading to 2012? if not then do this now
- Have you updated your boot media with the newly generated Litetouch_x86.wim (meaning your boot CD, boot USB or WDS)
The thinking behind this is that if you are using MDT 2010 boot media to try and speak to an MDT 2012 DS then you will have the same problem.
Issue 2 is that you've had the TS running in the past but it's broken for one reason or another.
- Have you recreated your Task sequence using the MDT 2012 client template? There are (minor but critical) differences in the logic between the versions of MDT and the new task sequence template has been updated as such. Using an MDT 2010 template with
MDT 2012 scripts can cause this.
These are 3 things that cause similar issues to you following an upgrade.

Pre-Download System Updates to use w/MDT 2012

Similar Messages

Maybe you are looking for