Pre-Filled Selection Criteria in Transaction CKMLCP Report CKML_RUN_STATUS

Dear ABAP Specialists,
i am actually searching for the origin of the data provided as costing run number while running the report via transaction in foreground. If i try to start the same report via background on SE38, i always get the information costing run number is missing.
So can someone help me to identify which is the costing run number i am searching for or better where this is normally drawn from, so that i could possibly start this steps via job automatically in the future or at least have the information where i could get it from?
Thanks a lot in advance
Best regards
Carsten Klatt

Similar Messages

Hide Particular Item Group from Selection Criteria of Sales Analysis Report

Hello Experts,
Is this possible to Hide Particular Item Group from Selection Criteria of Sales Analysis Report?
I have one Item Group as 'Special Items'.
Now, when I open Item wise sales analysis report, I want to hide above mentioned group from selection criteria.
Thanks in advance.
Best Regards,
Pankit Sheth

Hi,
1. Not possible to put validation for selection criteria windows.
2. In standard, I don't think it is possible to hide only one item group.
3. Alternatively don't give authorization to user for running sales reports. If still need create customized query and ask user run every month.
Thanks & Regards,
Nagarajan

How to use a subreport field as selection criteria for the main report

Dear All,
   I created a report with one subreport and im comparing information from both reports but i need to apply selection criteria in the main report using one of the fields in the subreport, the problem is that the subreport field doesnt appear in the select expert screen. By any chance, someone knows how make a subreport field be used by the select expert.
Thanks,
Martha Medrano

Dear Dom,
   I created the subreport table called IIM (748 items) in sql in the main report as you suggested with the below code:
SELECT "IIM"."IPROD", "IIM"."IDESC", "IIM"."IID"
FROM   "S102F360"."BPCS405CDF"."IIM" "IIM"
WHERE   NOT ("IIM"."IDESC" LIKE 'GEN%' OR "IIM"."IDESC" LIKE 'OBS%') AND "IIM"."IID"<>'IZ' AND "IIM"."IPROD" LIKE '3%'
and i have another table called ITEM_MASTER (3221 items):
SELECT "ITEM_MASTER"."ITEM_ID", "ITEM_MASTER"."DESCRIPTION"
FROM   "WHSPRO"."dbo"."ITEM_MASTER" "ITEM_MASTER"
ORDER BY "ITEM_MASTER"."ITEM_ID"
and im trying to display all items in the ITEM_MASTER table that are not in the IIM file but i haven't been able to accomplish this, i am using as primary the ITEM_MASTER table with 'Inner Join' as Join Type, and '!=" as Link Type. Do you have any ideas on how can i display the requested items.
Thanks for your help

Skiping initial selection criteria screen of HR report for Manager Desktop

Dear All,
The reports are configured using a custom scenario (Z Scenario) for Manager Desktop and used over the Portal through MSS. I have a requirement where for only one report (named Expired Qualifications) the initial selection criteria screen which comes when accessed through portal needs to be disabled or skipped and directly the transaction S_AHR_61015536 for this report needs to be called.
Please provide the inputs if it can be done and how for one report only.
Regards,
Samir

Dear Sen,
I have checked the thread suggested by you but the report here is not independent transaction integrated using iView. It is a part of Scenario which makes the reports available to the managers. It uses MSS Standard iView "Reports" and "Selection Criteria". Both iViews are in one page as delivered by SAP. The reports iView displays all the reports configured in the scenario for Manager Desktop and Selection Criteria iView is launched first in the portal content area when the report ( "Expired Qualifications") link is clicked from the Reports iView.
Regards,
Samir

2 selection Criteria on Profit & Loss Report (Project & Dimension)

Good day Experts,
Is it possible for Profit & Loss Report to have 2 Selection Criteria? our client wants to have Profit & Loss Report per Product (Project) & Branch (Dimension).
We tried to create an A/R & A/P Transactions with Project & Dimension defined for each line item, when we viewed the P&L Report, and select Project only as the Selection Criteria the P&L is correct, but when we included the Dimension on the Selection Criteria it only shows the Income / Turn-over Account Value & not viewing the COS / COGS Account Value.
Hope to hear from you soon. =)

First you should check in JE where project and profit center updated or not .because if account type is not Expenditure then cost center nerver effect JE entries .
And Project updated have not any issue but in Cost center it should be Expenditure Account in Chart of Account.
Thanks
Manvendra Singh Niranjan

Copying selection criteria in XLR advance report builder

Can anyone tell me if it is possible to copy columns, rows or cells in the XL Reporter advance designer and copy the selection criteria as well?
Thanks

Have you tried to save the file as .rcr so that you could reuse the columns, rows or selection criteria?
Thanks,
Gordon

Adding Selection Criteria in Any Payroll Report(PTax)

Dear Experts,
Can you please tell me the Payroll Report especially with the Professional Tax having the Column field of "Business Area". My Client want the report with Business Area Wise where it will helpful to identify the Region or Branch Office,when the G/L Account in FI at the time of mismathching.
The Personnel area's are not equal to the Business area for my client.
I have tried in the Table T599B, but it is not working . Please tell me if there is any specific to work on this table.
Please throw some light..
Thanks
Praveen

Dear All,
As I added the Business Area field in in Selection Field with use of "Further selection" button of the transaction PC00_M40_PTX,and generated the report..
In the Generated report I have selected the "Change Layout " button and it doesnt shows the Business area Field.
Please explain if any config is required..
Thanks

Where do you create a Selection Criteria TOKEN? (Crystal Reports, SAP B1)

I have downloaded "How to Work with Crystal Reports in SAP Business One" and read where it mentions "tokens" (starting on page 19). I followed the directions and created a New Parameter in a Crystal Report with the name of
BPCode@Select distinct CardCode from OCRD where CardType = "C"
as directed on page 21 as an example of a token. OK, so now I have a parameter with a very long name that doesn't do anything when I run the report in standalone Crystal Reports connected to our SAP B1 application.
At what place in the "Create New Parameter" dialog box in Crystal Reports do you actually enter this information? Nothing in that dialog box seems appropriate for SQL expressions. Reading through SCN threads, I could not find anything that addressed this simple question. What am I missing?
NOTE: I do NOT have the CR Add-In available to me in SAP B1. I cannot get it to install. All of my work is done in standalone Crystal Reports and all reports are then imported from there. I am a CR developer with less than 1 month experience with SAP B1.
Thanks.

OK, so I imported an .rpt file as a "report" instead of as a layout and placed it in a known module location (though the options were extremely limited). I had no idea where to go to run the report, but under "Modules", "Reports", and the location I just imported to, I found and chose the report.
The next step was a dialog box with two blank prompts and a third blank prompt asking for a particular field value from a table in the report. The actual Crystal report has only two parameters (good ol' DocKey@ and ObjectID@). I have to actually look at a known document in B1 and enter the values for the parameters before I get an actual result.
Now, more questions...
If there is a token in this report process, where is it?
Why would I run a report this way when it's going to ask me the DocEntry and ObjectId numbers which are not known to me unless I do research (Actually, what you don't know is that all of the reports I've created are revisions to marketing documents, so I haven't created anything new or unique to B1 that would involve complex analysis).
I spend almost two hours a day scouring the SCN to figure this stuff out and am still lost. I haven't read anything anywhere that describes this process in an adequate fashion. If SAP makes BOTH B1 and Crystal Reports, why not make the connection between them seamless and user-friendly?
Gordon, if you're listening, you'd probably do well writing another book on this subject!!

Need to take part of selection criteria out of a custom report (R painter)

Hi Experts..
I have a requirement to hide cost elements/group which appear as part of selection criteria on our custom report (report painter) for projects.
1. Why this appears as part of the selection criteria as i did not find this defined in Edit --> General data selection. (I only found CO area, Valuation, Fiscal year, Period, and Object in there).
2. We have found a system performance issue when a user put in cost elements for selection. So I am required to take this out. I thought i can just take this out from General data selection.. If I can't find it in there, where would i be able to do that??
3. Suppose I would hide this selection by creating a screen variant.. I was looking in SHD0
but its not working with our Z T.Code...it display the error message "Variants are possible only for dialog transactions"... This does not seem to work with a custom t-code. Then how would I do this ????
Please help clarify on this ....
Thanks....
Monica
Edited by: Monica Kong on Aug 24, 2008 6:01 AM

Hi Monica,
I believe we have an executable report here...
go to se38 -> enter program name -> click on "attributes" button -> display
We can see the type as 'Executable' or 'Modulepool'
generally a selection screen is brought by using keywords 'Parameters' or 'select-options' in Executable programs and with screen in modulepool ..although we can use a combination of both in some cases
So in your program..
check for keywords
'Parameters'/'Select-options'
The best way to proceed is to press F1 on the field that needs to be removed from selection...note the details
"screen number" and "screen field"
(1)By default screen number = 1000 if it is an executable program
Now see the scrren field ..if it is select-options it will something like field-low or field-high
so in the report
search for field for cost center and group with keyword starting as parameters or select-options and comment the same
Remember to comment tte fields throughout the program since this field will be used in multiple locations
(2) if it is modulepool program note the screen number , go the program and screen and remove the field from screen painter and comment the fields where ever used in the program
Also note that using screen variant is a good option but done if user needs specific settings on a report or we need the original report as it is plus additional report with few variations
Hope it helps
Pls check and revert
Regards
Byju

Portal Activity Report with Selection criteria

Hi All,
I have created an iview using 'Portal Activity Report' template, added the iview to page and page is added to the role which is created for this report. Also, users were assigned to the new role. When users go to portal and see this report, they are seeing the final output of this report along with the 'Download Report' option.
My requirement is to give selection screen option (Type of report and Reporting period) to users. So that users will change the selection criteria and run the report as per their need. Please advice me on how to do this.
Thanks in advance.
Swapna.

swapna,
you can do this by creating a webdynpro application for accessing the database tables, the list of data base tables is in this [help |http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/frameset.htm]document and use web dynpro application to connect to that tables. Check this thread for[ dynpro and database tables |dynpro and database tables;
regards
Mahesh

" STEPS TO CREATE SELECTION CRITERIA IN WEBI-REPORTS ! "

Hai friends ,
Let me know the procedure to create a Selection Criteria on the webi-reports . Based on the Selection criteria, I should execute the report.

aNSWERED

Selection criteria in GR55 Reports

Hello,
Where do I customize the selection criteria in the GR55 reports? It's bringing a Controlling Area default that is 0001 and I want to change it to bring the controlling area from the company code defaut.
I changed it in SU3 and worked for myself, but I wonder where can I change for all the users.
Thanks
Barbara

Hi,
Are u refering to The serial number and batch management report if so that can be disable by print prefernces....
Try it.
Regards
Chidambaram

MSS Reporting Workset : Selection Criteria iview

Hi All,
We have a requirement to not allow the Selection Criteria iview of MSS Reporting workset to get displayed, when the user selects a specific report from Reports iview.
Any pointers regarding the issue would be of great help.
Thanks in advance,
Anupama

It is not possible to avoid the display of Selection Criteria view at the call of a report that is part of MSS Reporting Workset.
The report was called in different workset
Edited by: AnupamaD on Nov 22, 2010 11:19 AM

How to add into dynamic selection criteria (FBL1N) - custom field from LFB1

Hello all,
i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.
open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
        from <b>VF_KRED</b>
          where LIFNR in KD_LIFNR
          and   BUKRS in KD_BUKRS
          and   LAND1 in KD_LAND1
          and   KONZS in KD_KONZS
          and   VBUND in KD_VBUND
          and   AKONT in KD_AKONT
          and   BUSAB in KD_BUSAB
          and (VF_KRED_WHERE)
Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
Is needed repature of standard - enhancement of view VF_KRED?
Thank you very much.

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

Display Selection Criteria - KSB1

Hi All
When using either transaction KSB1 or report S_ALR_87013620 and drilling into KSB1 users are unable to display the selection criteria they have ran the report on when they select a 'user -specific' report layout variant. If they user a default SAP layout variant this displays the variant name, and selection criteria such as cost centre and currency above the main body of the report.
Is anyone aware of this issue or if it is possible to display the selection criteria on user- specific reports also.
Thanks
Simon

Hi All
When using either transaction KSB1 or report S_ALR_87013620 and drilling into KSB1 users are unable to display the selection criteria they have ran the report on when they select a 'user -specific' report layout variant. If they user a default SAP layout variant this displays the variant name, and selection criteria such as cost centre and currency above the main body of the report.
Is anyone aware of this issue or if it is possible to display the selection criteria on user- specific reports also.
Thanks
Simon

Pre-Filled Selection Criteria in Transaction CKMLCP Report CKML_RUN_STATUS

Similar Messages

Maybe you are looking for