Pre - Get mail setting does not display " as they arrive" as an option

I have 3 email accounts set up on my Pre. 1 of the 3 accounts does not have the get mail option of "as they arrive". Why is that?
Post relates to: Pre p100eww (Sprint)

The email is setup as a POP3. POP3 does not support the Items as arrive function.

Similar Messages

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have check all mail settings for ID and password.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.

In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

Transaction SMOEAC does not display Object type and Object Name options.

Dear all,
When I go to transaction SMOEAC system does not display fields Object type and Object Name option instead displays an empty frame allowing only to create new objects.
System does not allow and display existing objects to edit.
Most imp with the same ID, I am able to see the existing objects and two fields "Object type" and "Object Name" on different machine. So there is no authorization issue.
My SAP GUI version where these fields are not visible is 640 Final Release with 6405.5.18.1016 version and Patch level 18.
My SAP GUI version here these fields are visible is 640 Final Release with 6404.4.14.1012 version and Patch Level 14.
Any idea what could be the reason?
Regards,
Sandeep Parab

With installation of latest version of SAP GUI 710 final Release resolved my problem.
Regards,
Sandeep

Why "Bulk Mail" foder does not display number of unread messages unless I click the folder (Yahoo mail through IMAP)?

Yahoo mail account's "Spam" folder (as viewed through "Yahoo mail" web interface) is displayed in Thunderbird as "Bulk Mail" (IMAP). Looking at the account's foders in Thunderbird I see the number of unread messages in each folder. "Bulk Mail" appears always to be empty. If I click the "Bulk Mail" folder, then magically messages appear in message list, and the number of unread messages is displayed next to folder name, like in all other folders of this account.
Why I need to touch the "Bulk Mail" folder in order to see the number of messages in it?
Yahoo deletes messages from this folder at certain periods. I'm in danger of loosing messages unless I remember to touch all of my Yahoo account's Bulk Mail folders in Thunderbird.
How I can get "Bulk Mail" folder to show the number of unread messages like all other folders of the same account do?
Thunderbird 24.6.0, Windows 7 Enterprise (Sp1)
pekka

I don't use IMAP in Thunderbird, so I can't provide step-by-step instructions, however, other e-mail programs have settings for whether or not to synchronize each individual folder on a schedule or using push IMAP (vs when clicked). If Thunderbird has those settings, I would expect them to appear in the folder properties or account settings. Perhaps this will be helpful, but I don't know if you've already done some digging like this or not.
FYI, a quick search brought me to this page:
https://support.mozilla.org/en-US/kb/configuration-options-folders
One item listed in that page is this:
Configure IMAP folders, connections and namespaces
Menu location: Tools | Account Settings | <account name> | Server Settings | Advanced
Perhaps that would be a good place to start since it does mention IMAP folder connections, but folder properties still might be an easier place to peek first, just in case. For that, the site lists this:
Configure folder properties (IMAP folders only)
Menu location: Edit | Folder Properties | General Information
However, I think you could right-click on the "Bulk Mail" folder and hit properties in the pop-up menu.

Mail Program does not display the content of some AOL emails

I have an AOL email address but access my email account through the Mail program (ver 2.1). I am using both a Powerbook G4 and an iMac G5 (OSX 10.4.8) and have the same problem with both machines. When I try to read many (approx. a fifth) of my emails in Mail, I get the following (or something similar):
Content-Type: multipart/alternative; boundary="------------040506000506030104030008"
If I log on to the AOL server directly, I can read the email or download the attachment. Any way to fix this problem short of ditching AOL?

I have exactly the same problem, except the frequency of occurrence is much lower -- maybe one in 50 to 100 emails delivered from my AOL account does this. I don't know the root cause or if the app or the server is at fault, but the immediate cause is Mail either doesn't receive or doesn't properly process the message's headers, including the MIME 'boundary' declaration necessary to convert the raw message stream into its multiple parts, so it treats the whole thing as one long plain text message.
Standard fixes like rebuilding the mailbox or reindexing have no effect since the flaw is carried into the emlx file that stores the message. In some cases, I have been able to edit the file with a text editor to preserve some message part(s), but this is not something you should try without knowledge of MIME standards or emlx file structure.

After upgrading to 10.2.2.12 on windows XP SP3 , itunes does not display any summary info or buttons/options. The buttons work but it does not display the text on the button or the options available.

I recently upgraded the iTunes software to 10.2.2.12 on my Windows XP laptop. Since then, iTunes stopped displaying the Summary info
, the text on the buttons, the various drop down options. The buttons seem to be working but I can't tell what that button is supposed to do
or the option I am selecting. This is preventing me from syncing my photos to the laptop.
this was not a problem with the previous version of iTunes.
Actions taken :
- I tried downloading iTunes again and repairing the install. That did not fix it.
- Don't want to uninstall it as I am worried that I would lose all the songs and the purchases etc.
1. Has anyone encountered this ?
2. Is there a solution for this ?
Many thanks in advance for your time and help
Nitin

bmalones44 wrote:
b noir, my Windows 7 machine is having the exact same issue as nsadal, and I have already confirmed that all six of the Segoe UI fonts are installed on my computer. Are any other Windows users having this problem with the 10.2.2.12 iTunes release?
Yeah it does, although the problem predates version 10.2.2.12. It's been around since earlier-on in the version 10s (at least).
It's usually Segoe UI font trouble on the Windows 7 systems too. Unfortunately, the Vortical troubleshooting technique only works on XP and Vista systems, so dealing with the issue on a Windows 7 system is trickier. (There's a bunch of different possible issues relating to the fonts that could be in play, and so the treatment tends to depend on which issue in particular you've got with the Segoe_UI fonts.)
For discussions of various Windows 7 variations of the "Missing text" thing, and possible treatments, see the following (unfortunately, rather long) topic:
iTunes 10.1 Missing Text

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!! :(

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!

Hi
You need to check with your ISP whether or not the send mail server (SMTP) requires a password. Some do, but many do not. When you know the correct password to send mail, then you need to tell Mail as follows:
Mail menu > Preferences > Accounts > Select the account
Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
In the Account Information tab put the server name
In the Advanced Tab, set up the authentication information from your ISP.
Good luck
Bob

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

I have yahoo mail, since your newest upgrade, when I open an email with a picture in it. The picture does not display

I have windows7/8 and use att.yahoo mail. when I receive an email with a picture in the body, the picture does not display, this started happening after fire fox latest upgrade

If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

The contents of some yahoo mail e-mails does not display (except using No Style page View, or when doing a Reply), but IE works fine.

For some (but only some) incoming Yahoo e-mails, Firefox does not show the text of the e-mail. I can see the text with the No Style page view. It also appears when I do a Reply. And, FYI, IE (both 8.0.7600.16385 and 8.0.6001.18702) have no problem with the same e-mails.
== URL of affected sites ==
http://mail.yahoo.com

Executing a refreshing read all query, based on the required locations, on UnitOfWork A, after UnitOfWorkB has committed will update the vendors within the UnitOfWorkA, including those that may have been added to a location. This is most likely the easiest to implement. For efficiency you may wish to use your Read Only Session to execute the refreshing queries for the Vendors. By performing the query based on the possible Locations you will retrieve all of the available vendors, including those newly added.
uow.refreshAllObject(collectionOfLocations);
..or
ReadAllQuery query = new ReadAllQuery(Vendors.class);
query.refreshIdentityMapResults();
query.setSelectionCriteria(query.getExpressionBuilder().get("location").equal(location));
uow.executeQuery(query);
--Gordon

Pre - Get mail setting does not display " as they arrive" as an option

Similar Messages

Maybe you are looking for