Pre hook up question?

Just received the new Apple TV and before I hook it up had a few questions.
Do I have the ability to stream any video content from my iMac or just certain types?
Do I need to have the video/movie I am planning on playing loaded into iTunes?
I have 1080 ripped video files in the x264.mkv format that I play using the VLC player.
Thank You
Sean

"Do I have the ability to stream any video content from my iMac or just certain types?"
only http://www.apple.com/appletv/specs.html
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
"Do I need to have the video/movie I am planning on playing loaded into iTunes?"
yes you do

Similar Messages

Oracle EBS R12 Pre - Implementations phase question air

Oracle EBS R12 Pre - Implementations phase question air
Posted: Jun 30, 2009 10:22 AM Edit Reply
Dear all Gurus,
We are going to implement Oracle EBS r12, for industrial concern, we have following quires if any peer may suggest.
1) we heard the oracle R12 has build new release with 11g db , is it been practical for choosing it for corporate ???
2) Linux Read hat which version is more stable like 5 releases is compatible with R12 new release?
3) We are also thinking for 64 bit architecture rather than 32 bit, could any one figure out the practical pros and cons for this.
4) We are also wondering about the server machine brand and its configurations like HP DL380 G6, DELL 2850? could any one share abut his experience about the same.
5) What sort of Server configurations (Processor , 2way -4way , RAM , HD and other accessories ) for r12 Multi node setup for 150 clients (DB Server , Apps Server , Test Prod )
6) What should be backup strategies like tap backup and how much space requirements we must have provisioned for retaining almost 2~3 month backup.
7) Application implementations methodologies?
8)
I know to address our queries would be time consuming for you bust peoples , but I would really oblige for being shared your journey this would defiantly the PATH way for other like mentoring for others.
looking forward your valuable instructions ASAP.
Thanks & Best Regards
Muhammad Waseem
Manager IT
Neee-Has Textiles Divisions
31-Q Gulberg II Lahore
Pakistan
92-0333-4240949

Duplicate post.
Oracle EBS R12 Pre - Implementations phase question air
Oracle EBS R12 Pre - Implementations phase question air

Bought MA607LL/A Intel 1.66 2006 mac mini ubuntu pre install have question

Hey guys. I bought this model and comes with usb pre installed to drive. Doesn't have OSX. My question is I have a net book with 320gb and that is esata so I'm going to install in the mac. Now can I put the 60 gb hard drive that came with mac mini into a usb enclosure and when i feel like go into well i think need to push option? Go through that then boot up the external drive that has ubuntu when i feel like using ubuntu? I run ubuntu on main computer and so would like to use mac os on mac mini and ubuntu. Ty

Hello,
Yes, normally holding alt key or option key will show your boot choices, but some Linux distros need a boot manager installed.

Pre-sale MacBooks question.

Hey - I know this Question is a Pre-sales question but there isn't a forum section for that - and apples contact us section haver replied after two days, so I'm posting here
I'm looking at buying either the new MacBook Pro 13" or the MacBook Air, however I can't decide which one to go for, I went to London last week and had a session on the old Pro and Air, it helped - but it only helped by making me sure I wanted one of them...
I was wondering, would it be possible for me to purchase one MacBook and try it out for a few days, and then swap it and try the other?
Eg:
Buy MacBook Air, use for two days, bring back, try out MacBook pro (and pay the extra amount)?
Sorry if that sounds stupid,
Cheers,
Tom.

Tom.Rhodes wrote:
Hey - I know this Question is a Pre-sales question but there isn't a forum section for that - and apples contact us section haver replied after two days, so I'm posting here
I'm looking at buying either the new MacBook Pro 13" or the MacBook Air, however I can't decide which one to go for, I went to London last week and had a session on the old Pro and Air, it helped - but it only helped by making me sure I wanted one of them...
I was wondering, would it be possible for me to purchase one MacBook and try it out for a few days, and then swap it and try the other?
Eg:
Buy MacBook Air, use for two days, bring back, try out MacBook pro (and pay the extra amount)?
Sorry if that sounds stupid,
Cheers,
Tom.
There is a restocking fee for open items. You might get away with the restocking fee if you do by another similar item

Xbox One Pre Order Fullfulment question

Ok I know you guys have answered these questions, a million times. I am wondering, I wont be able to attend the midnight launch. I plan on being there right when the doors open that morning. Will you guys have enough consoles for us. I forgot to say I did pre order. I cant imagine your stores not, because that would mean you sold all the pre ordered consoles at the midnight release. Which sounds crazy just typing it. I doubt that will happen any reisurance will help.

You should be fine. A lot of people are spazzing out and in panic mode.
If buy some chance you don't get it on Friday you will have it with in a few weeks.
Personally i would not try to be there at midnight and it isn't worth taking time off from work to get it.
I didn't pre-order an Xbox because my daughter said to wait on one becuase she wants to see which way all her friends go if they get a new system. If your going to change platforms this would be the time to do so.
If none of her friends go PS or Xbox One right away she would still play our Xbox 360 becuase if she cannot play with her friends she has no interest in a new system.
I did pre-order a PS4 that I am picking up tonight but it is a gift and not for home use.
I think you will be fine with your Xbox One

Pre-Sales Installation Questions on Adobe CS6

I am thinking about getting Adobe Creative Suite Design Web Premium CS6 from the local campus bookstore so I can use it with the web certificate program I am taking. They have a boxed version which I will probably get. Less expensive than the digital download card version. I had some pre-sales question before I commit to buying it. The person I talked to on the phone was not able to answer a few questions about the software, must have been a newbie and unfortunately the only one in the department at the time.
Since I will be purchasing the boxed version directly from the store, do I need to still e-mail some kind of student proof to Adobe or is a student e-mail sufficient? How does that work part of the installation work/what's involved? Is there a serial number in the box already or will it be sent by e-mail?
Also, my Mac may be on it's last leg but it seems to be hanging in there. Can't afford to buy a new computer just yet. What happens if the hard drive experiences some kind of data failure. If I need to reinstall on a new computer or replacement boot drive, do I have to repeat the whole process of verification of some kind prior to re-installing?
Once I graduate (and understand that will not be able to keep my student email address), how will this effect me in regards to the Adobe software? What if I need to reinstall or install it on a laptop (I heard you can install it on two computers)?

Since I will be purchasing the boxed version directly from the store, do I need to still e-mail some kind of student proof to Adobe or is a student e-mail sufficient? How does that work part of the installation work/what's involved?
See http://www.adobe.com/education/students/student-eligibility-guide.edu.html?
Is there a serial number in the box already or will it be sent by e-mail?
See https://www.studentteacherlicensing.com/
Also, my Mac may be on it's last leg but it seems to be hanging in there. Can't afford to buy a new computer just yet. What happens if the hard drive experiences some kind of data failure. If I need to reinstall on a new computer or replacement boot drive, do I have to repeat the whole process of verification of some kind prior to re-installing?
You only verify once. Acceptance makes you eligible for a serial number.
To re-install after that, you install the software and enter your serial number.
Ensure that your computer meets the minimum requirements to run CS6.
Once I graduate (and understand that will not be able to keep my student email address), how will this effect me in regards to the Adobe software?
You can still continue using your student software after you graduate.
http://prodesigntools.com/difference-between-adobe-cs5-student-editions-vs-regular.html
You will pay normal retail price for other Adobe software or to upgrade or to join the Cloud.
What if I need to reinstall or install it on a laptop (I heard you can install it on two computers)?
Download the software installer (or use your disc), install it and enter your serial number.
Your license entitles you to activate the software on a maximum of two computers at the same time.
Note: the CS6 license is operating system specific i.e. works on 2 x Windows only or 2 x Mac only. You cannot mix and match. However you can mix and match Cloud (CC) software.

Mac Mini Pre 2009 Wireless Question

I have 3 ways of accessing my wireless network. My wife's new macbook (5,1), my iPhone 3G and my pre 2009 Mac Mini. All worked in our old house. We just moved and wireless router is located further away from my mac mini.
Wife's computer and my iPhone get "full bar" reception but my Mac Mini cant even get through password phase to new network and has sporadic reception. If I move Mac Mini next to router seems to work fine...
Is it really possible that the wireless reception on Mac Mini is so much weaker than other 2 Mac's; or do I have another problem?
Thanks

Have you tried moving the new location of the wireless router to see if that makes a difference? In my house, for example, when I have the wireless router on the desk I don't get as good a signal coverage as when I place the router at the top of a tall bookshelf, just under the ceiling.
If that doesn't help, you might want to post this in the mini discussions at http://discussions.apple.com/category.jspa?categoryID=158

Speaker hook up question

Hi,
I recently bought an HP Roar Bluetooth speaker for my HP 17 laptop. The idea was to have the laptop speakers (Beats) and the Roar playing at the same time. Hey, there's some nice audio!
Anyway, when the Roar is active, the Beats audio wont play. When the Roar isn't active, the Beats does play. So... Is there a way to set things up so that both sets of speakers play simultaneously? I'd really like to get some stereo effects and a deeper audio experience. I should add that this happens both when the Roar is acting as a Bouetooth wireless speaker and when its hooked up via a USB cable
Many thanks,
Bob

Don't use technology with your TV that's too advanced. This may sound silly but the problem with the newer 7.1 surround sound systems is most things you watch or use it for, won't use all the speakers. For example, normal TV shows usually only utilize the center speaker. Some TV movies (usually must be an HD channel, like HBO HD) will broadcast in left and right speakers or in 5.1 surround sound. Most DVDs will broadcast in 5.1, but not many have made the step up to the 7.1 (neither have the TV channels). Just make sure and do your research. A lot of people aren't aware too, that just because something is broadcasting in 5.1, all the speakers still may not be utilized. Each speaker has its own function - 1 for music, 1 for background music, 1 for voices, etc. I would recommended a 5.1 surround sound set.
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

PRE POST FADER Question.....

I have a lead vocal sent via a send, to an AUX with a delay on it. I muted the lead vocal track, but am still hearing the echo from the delay AUX track. I checked, and it is set to POST fader. So this shouldn't happen.
I have just noticed something while writing this.
The track in question is a mono track, with the SEND on it sent to the AUX as stated.
I have other tracks sent to the Aux with the delay, and when they are muted, they do NOT come through the delay. The DIFFERENCE is, those are AUX tracks.
So....6 background mono tracks whose output is set to say, BUS 1. AUX with BUSS one as an input, for all the backgrounds. That AUX has a SEND to the DELAY buss, and when it is muted, no sound comes out the delay, which is correct.
So it SEEMS that the fact that my LEAD vocal that I am having the problem with, is a mono track, set to the stereo out, with a send to the delay, and is NOT working properly. Hmmm...am I onto something here? Bug?
TH
Message was edited by: Tom Hartman1

Got it, I see, yes. My mistake was in thinking muting the BVX Aux would mute the send to the DEL Aux, because it's been a long day mixing and I was not thinking this out. Thanks for that!
Muting AUX tracks to mute groups of vocals make it easy to do stems, and in this case, it was a background vocal, but the ONLY background vocal that needed to have a delay.There were many other backing vocal tracks that you can't see here also assigned to that BVX AUX. It really shouldn't have been grouped at all with the rest of the backs in the first place. I would normally not have a send going to a delay on one individual track that was assigned to a group (bus) track like the BVX Aux. Normally the send to the delay would be on the AUX track. This was an unusual case, and I didn't route the "Ad Lib" track in a manner that makes sense. Way too long a day mixing;)
Thanks for clearing this up. Thought I was going crazy. Well, I kind of was...;)
Tom
Message was edited by: Tom Hartman1

Pre-Order Bonus Question

So I want to Pre-Order Shing Megami Tensei Devil Survivor 2 and it does not confirm the bonus with the Soundtrack, Decal set and the collectable box. Other reatailers like Amaon and Gamestop does however. I was wonderong if I Pre-Order the game from here, will I get the bouns?

Hello Alex420,
Looking to upgrade Devil Survivor 2, eh? Great choice; we'd be happy to have you get your copy from Best Buy!
At this time we have not received word of pre-order bonuses available at Best Buy, but we have reached out to our business contacts to see if we can get any confirmation for you. Please watch this thread as well as the product page for any updates.
Thanks,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Business account Pre-order problem/question/help

I pre-ordered with my business account online. They allowed me to bill it to my account. I got a confirmation E-mail that gave me a 8 digit Reference # starting in MB
MBXXXXXXXX
No order number or confirmation number so I cannot track my shipment. When I look in my transaction history all I see is my order was submitted and is currently "Pending"
02/03/2011-06:42    Pending The request is currently pending.
02/03/2011-06:42    Submitted We have successfully received your request.
Order Date: 02/03/2011 09:42:38
Order Status:
PRE
Orders received today ship by 02/09/2011
That is all the information I can get. No one can tell me if its shipped, why it hasn't and why I have not received any more information with tracking or order numbers. Anyone else having this problem? Customer support is WORTHLESS. They can't look anything up and continue to tell me no one's phone has shipped even though I can clearly see on here that is not the case.

I ordered 2 through my business account. (upgraded 2 lines)
my orders status says: "PRE"
I look at history and this is what is says.....
Transaction History Details
Structure: Default     Position: Default Set Default Position
TransactionConfirm # Wireless Number Date/Time * Status Transaction MB48957**** 813-2*0-**** 02/03/2011-00:58 Submitted Upgrade Equipment
Transaction History Date/Time * Source Status Description 02/03/2011-00:58    Submitted We have successfully received your request. 02/03/2011-00:58    Pending The request is currently pending.
I ordered @ 3am Eastern Exactly.
I have read other sites posts that business accounts were not shipping early and would be shipped on the 9th.
Anybody have any updates?

PRE 9 Performance question

Hi all,
Finally made the big move from PRE4 to PRE9.0.1. As usual with PRE upgrades there are functions that were removed that make me scratch my head, such as no longer able to designate favorate transitions. And moving the zoom in-out slider over to the edge of the display, and dumbing down the Markers icons (resulting in taking more mouse clicks now just to add a marker). But those are just annoyances.
My actual problem is that some functions seem to be much slower than in my previous version (on same PC). For example, a simple rendering of two 5 second title clips with a transition joining them takes longer than real-time to render (takes longer than 10 seconds to render 10 seconds worth of video). Nothing special - two tracks, one A/V and one just the title. Rendering other places such as fade-in/out is slow also. This is SD AVI video from the same DV camera I've used for years (Panasonic PV-GS320).
Scrubbing works fine - I can't move the CTI faster than it can display/play audio. DVD burn time seems reasonable (and successful) although I have not done anything lengthy yet. No crashes, and on the plus side so far all the problems I had with the titler in PRE4 are fixed now. I do notice the same problem Neale mentioned where displaying the thumbnails on the timeline is very slow.
Update: I did notice one wierd thing: when you mouse-over a clip on the timeline and you get the little window with the start/end/duration information, the little window actually blinks off and on - and I'm not moving the mouse. On (1/2 second or so) off (1 second). It's on just briefly enough it takes a few tries to read the information.
Specs on the PC:
HP PC with AMD Athlon II x4 630 CPU @ 2.8 GHz
6GB RAM
Windows 7 64 bit - current on patches
Three internal SATA HD's (one for software, one for video, one for rendering)
Current video driver (NVIDIA GEFORCE 9100 version 8.17.12.6099)
Current Quicktime 7.6.9
Can anyone think of anything I'm not checking? Or is PRE9 just slower?
Thanks!
Bob

... and to add to Steve's comment, you will have the same response with more
demanding video (Full HD TOD, AVCHD etc).
So to keep it seamless, they made it slow for SD as well

Pre Press trapping question

I've been here with this issue before, but now I need a refinement on method.
In this instance I have a PMS spot color solid block with type over that using a second solid PMS spot color. I need to create a trap and 'overprint black is not working in this case, the two colors butt up against each other with no overlap in the platemaker roam. Short of making the trap manually, and with no allowance to buy a third party app at this point, is there a way to create the trap in Illustrator?
TIA,
Ken

Hi Ken,
Here's my attempt at explaining the technique we used in our pre-press house; you get more control and maintain the integrity of the type characters better than the stroking options (plus Illustrator's stroking behavior has not remained consistent with version changes). Illustrator's Trap feature in the Pathfinder menu can be useful, but only works for some situations.
To choke a lighter background under darker type, set the type to overprint, then use a layer of white underneath the overprinting object, inset by the trap amount, to knock out the area that will not be trapped. Here it is step by step:
- set the type Attribute to overprint fill
- make a copy of the type and paste it directly behind* your original type
- hide your original type for this step: convert the copy to outlines, offset path by your trap amount (needs to be a negative number so that the path in inset), delete the type copy and keep just the offset version, fill it with white, and turn off overprint
- make your original type visible again, and turn on overprint preview. You should see a darker outline around the characters
To spread light type into a dark background, leave the type as its spot color without overprinting anything, then use a copy of the type that is offset by the trap amount directly beneath it and set to overprint. Here it is step by step:
- make a copy of the type and paste it directly behind your original type
- hide your original type for this step: convert the copy to outlines, offset path by your trap amount (needs to be a positive number so that the path in outset), leave it the same color as your original type, and turn on overprint
- make your original type visible again. You should see a darker outline around the characters
*Tip: one of my favorite Illustrator features is the ability to paste in front or paste behind using Command-F and Command-B. So, using an object tool, Command-C to copy the type, do not deselect, Command-B to paste the copy immediately behind what is selected...

Pre-Purchased Download Question

Q: I got email notification that my pre-purchased CD was available. I have authorized my PC. I see on song from the CD in my Purchased folder but not the entire track list. How do I get the full pre-purchased CD?

Hi RangerRandell,
Welcome to the Support Communities!
The article below will get you connected with the iTunes Store Support. These folks can review your account with you:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

Pre-Order Codes Question

Hey guys,
I had recently pre-ordered Mortal Kombat X for the Playstation 4 from Best Buy and got the Activation Code for Goro, which I haven't used yet.
I was considering going back to Best Buy and seeing if I could exchange it for the Xbox One version and was curious if the redemption code would work on the Xbox One version instead?

Hey dekkocards,
Thanks for pre-ordering Mortal Kombat X from us. You can certainly shuffle things around and exchange the PS4 version purchased for an Xbox One copy, but the code you received for pre-ordering would not cross over with you. Each code is generated for a specific platform redemption process.
I know this may not have been the information you were hoping to receive, but I do hope it helps inform your decision as you decide whether or not you want to exchange your copy.
Regards,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Pre hook up question?

Similar Messages

Maybe you are looking for