Pre installed files
I purchased a Nokia 3710 fold January this year , with firmware version 3.80 Nokia sent a text saying there's an update to 4.30. After doing the backup to ovi and my mistake thinking it had backed up I updated to 4.30 big mistake it has lost all the Pre-installed files and no factory reset works. Even the photo's function not working yes you can take a photo and you see the thumbnail but when you open it up it says no photo's available I said all Pre-installed files are missing themes, tones, world clock, calculator, I have been in touch with Nokia and no reply from them as yet so my advice is don't purchase a 3710 or if you have one don't update the firmware FG
Solved!
Go to Solution.
noneoftheabove wrote:
I just received my brand new 3710 fold. Based on your experience, should I update it to the latest firmware? It's working fine so I guess I don't really need to upgrade, especially if I'll risk to break it by doing so.
Well, it's good to update your phone when a new firmware version is available for it. But i think that there's no reason to do it if the phone works fine...
If you want to thank someone, just click on the blue star at the bottom of their post
Similar Messages
-
How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?
hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck! -
My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?
FYI Mac OS X is not designed to be installed on additional Macs, unless you purchased it from the App Store, in which case you can make as many copies as you wish and install it on as many Macs as you own.
From the Recovery Disk Assistant -
Notes
If the computer shipped with OS X Lion or Mountain Lion, the external recovery drive may only be used with the system that created it.
If the system was upgraded to Lion or Mountain Lion purchased from the App Store, the external recovery drive can be used with other similarly-upgraded systems. -
Unable to copy file D018 error on pre-install
Hi,
We're on NW6.5 SP5 with ZFD4.01 IR6. We tried to rollout a series of
lights-out pre-install apps to workstations (NT 4.0 SP6b) on Friday and had
98 out of 262 workstations fail with the following error:
"Unable to copy file [\\unc path\939.fil] [D018]"
Workstations do have RF rights to the unc path where the nal files are
stored (via rights to the container hosting the workstations), and the macro
Source_Path is right, all the usual troubleshooting 'D018' checks are ok.
I've checked the AXT file and the Directory Create command comes before the
File Copy. Weirdly, only some of the workstations failed, and all on the
same file, which goes to c:\program files\blah\blah\blah and is called
_alphapm.exe.
To ensure this ran out ok we temporarily lowered the workstation refresh
frequency to 1 min, and the nal ran to all machines in about 6 minutes.
What could be the cause of only some of the machines failing, and all on the
same file?
Thanks,
Steve LawHi,
I've been troubleshooting this issue and now have Zenworks debug logs, which
I've managed to capture for both a machine that succesfully installed a
pre-install nal and one that failed for the same urn of the same nal. I'm
hoping someone can explain what might be happening. Here's the crucial
portion of the failed nal from zapplib.log:
This failed:
01/12/07 16:40:06.805 -- NWAPPSAGetObjectAttributes took 18 milliseconds for
OURCO_TREE
Number of Attributes: 1
1st attribute Name: App:Program Groups
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
01/12/07 16:40:06.805 -- This is an AOT delivered app
01/12/07 16:40:06.805 -- Start: ProcessFiles
01/12/07 16:40:06.835 -- NWAPPSAGetObjectAttributes took 18 milliseconds for
OURCO_TREE
Number of Attributes: 1
1st attribute Name: App:Copy Files
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
FileSettings: CreateRollbackFile szTempPath is C:\TEMP
FileSettings: CreateRollbackFile szRollbackFileName is
C:\TEMP\NAL6a42\NAL2.tmp
01/12/07 16:40:17.0 -- nwappCopyFileEx: Entering.
01/12/07 16:40:17.0 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil".
01/12/07 16:40:17.0 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL".
01/12/07 16:40:17.0 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:17.70 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:17.70 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:33.604 -- GetFileVitals: FindFirstFile Failed to find any
file matching \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:33.604 -- Exiting GetFileVitals 53
01/12/07 16:40:33.604 -- Exiting nwappCopyFileEx with 53
01/12/07 16:40:35.536 -- Stop: ProcessFiles
01/12/07 16:40:35.556 -- NWAPPSAGetObjectAttributes took 19 milliseconds for
OURCO_TREE
Number of Attributes: 9
1st attribute Name: App:Flags
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
The log for the successful workstation is below. As per previous posts I
checked that the same Windows file and folder rights exist on both the
workstations, and the existing file that was to be overwritten
(C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL) was not set to read-only.
The "FindFirstFile Failed to find any file matching blah blah blah" message
suggests that the problem is related more to accessing the source file on
the server (4.fil) than in writing it to the workstation.
This was a test to 10 machines, the report shows that, chronologically, 2
workstations installed it fine and then the ensuing 8 failed. I can't think
of anything that would lock the 4.fil file - as these are reads they
shouldn't actually lock the file anyway. We run McAfee Netshield 4.63, but
it's set to scan inbound files, not outbound reads.
Any suggestions as to why it was able to read the file for one workstation
and not on another? I have had greater success when I've activated "spread
from start time" over a 15 minute period, but still had one failure out of
ten. A tool that logged all file locks would be useful but I can't find
anything.
Thanks,
Steve Law
Zapplib.log of succesful workstation:
01/12/07 16:40:01.232 -- NWAPPCheckSchedule: PREINSTALL: Found app that has
preinstall set Lamda 5101401 PatchV2 lightsout test
#2.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.232 -- NWAPPCheckSchedule: PREINSTALL: Found app that has
preinstall set Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed and it has a schedule Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed has schedule trying it now Lamda 5101401 PatchV2 Lightsout
test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- FORCERUN: Adding Item to force run list
01/12/07 16:40:01.242 -- Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.272 -- STAGG: Found the GUID/version for WMI Agent
Downloader.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.272 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.272 -- STAGG: t has NOT been run during this session, run
it. app: Lamda Point at Production Server Auto
#1009.Lamdatest.AutoLoad.GENERAL.NAL.BHO.UK.SUNLIF E
01/12/07 16:40:01.272 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.282 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.282 -- STAGG: t has NOT been run during this session, run
it. app: Lamda idate reg key report.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.282 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.312 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.312 -- STAGG: t has NOT been run during this session, run
it. app: Lamda idate reg key report0.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.312 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.342 -- STAGG: Found the GUID/version for Viruscan8 epo
fix.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.342 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.372 -- NWAPPCheckForScheduledApps::Pre-install::Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE tree
OURCO_TREE
01/12/07 16:40:01.372 -- TreeName: OURCO_TREE
01/12/07 16:40:01.372 -- UserName: LAMTEST02
00:D0:B7:14:27:61.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.372 -- ConnType: 2
01/12/07 16:40:01.372 -- Entering RunApplication: Lamda 5101401 PatchV2
Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.392 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:01.392 -- pa.hContext structure
01/12/07 16:40:01.392 -- TreeName: OURCO_TREE
01/12/07 16:40:01.392 -- UserName: LAMTEST02
00:D0:B7:14:27:61.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.392 -- ConnType: 2
01/12/07 16:40:01.403 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.403 -- appLaunchApplicationWrapper::Enter
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: Start
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: szThirdPartyDLL =
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: End
01/12/07 16:40:01.413 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.473 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:01.503 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:01.513 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.573 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:01.583 -- Calling NWAPPSACacheApplications for:
01/12/07 16:40:01.583 -- Calling NWAPPSACacheApplications for:
01/12/07 16:40:01.583 -- nwappsacacheapp: Creating new filstore
01/12/07 16:40:01.583 -- nwappsacacheapp: Creating new appcache
01/12/07 16:40:01.583 -- nwappsacacheapp: Calling importfrom ds
01/12/07 16:40:01.663 -- NWAPPNetGetObjectAttributes took 51 milliseconds
for OURCO_TREE
01/12/07 16:40:02.184 -- Import from DS was successful
01/12/07 16:40:02.194 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- Calling NWAPPSAAddFolderToApp for:
01/12/07 16:40:02.204 -- NWAPPSetRegValAsService: Skip Service since service
is dead or I'm the WS: CreateFile: 183
01/12/07 16:40:02.204 -- NWAPPSetRegValAsService: Skip Service since service
is dead or I'm the WS: CreateFile: 183
01/12/07 16:40:02.214 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:02.224 -- NWAPPNetGetObjectAttributes took 7 milliseconds for
OURCO_TREE
01/12/07 16:40:02.254 -- NWAPPSAGetObjectAttributes took 28 milliseconds for
OURCO_TREE
01/12/07 16:40:02.734 -- Exiting NWAPPSACacheApplication
01/12/07 16:40:02.774 -- NWAPPSAGetObjectAttributes took 28 milliseconds for
OURCO_TREE
01/12/07 16:40:02.784 -- LaunchApp: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:02.784 -- Leaving NALContext Constructor
01/12/07 16:40:02.825 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.835 -- RunThirdPartyScript::Enter
01/12/07 16:40:02.865 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:02.895 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.925 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.925 -- RunThirdParyScript::Exit
01/12/07 16:40:02.925 -- NWAPPDistributeAppPA: Entering. App = Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:02.955 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.955 -- This is an AOT distributed application
01/12/07 16:40:02.965 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:02.965 -- Done checking if we should distribute
01/12/07 16:40:02.965 -- Should we prompt before distributing?
01/12/07 16:40:02.965 -- Should we prompt for macros?
01/12/07 16:40:02.995 -- NWAPPSAGetObjectAttributes took 30 milliseconds for
OURCO_TREE
01/12/07 16:40:02.995 -- NWAPPPreDistributionProcess Pre Distribution Script
processing.
01/12/07 16:40:03.5 -- RunThirdPartyScript::Enter
01/12/07 16:40:03.35 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.65 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.65 -- RunThirdParyScript::Exit
01/12/07 16:40:03.95 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.125 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.145 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.175 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.205 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.205 -- This is an AOT delivered app
01/12/07 16:40:03.205 -- Start: ProcessFiles
01/12/07 16:40:03.255 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.516 -- nwappCopyFileEx: Entering.
01/12/07 16:40:03.516 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil".
01/12/07 16:40:03.516 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL".
01/12/07 16:40:03.516 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:03.576 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:03.576 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:05.849 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:05.849 -- Exiting GetFileVitals 0
01/12/07 16:40:05.849 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:05.849 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:05.849 -- Exiting GetFileVitals 0
01/12/07 16:40:06.239 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil to
C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:06.540 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:06.550 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:06.550 -- nwappCopyFileEx: Entering.
01/12/07 16:40:06.550 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil".
01/12/07 16:40:06.550 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OL D".
01/12/07 16:40:06.550 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:06.550 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:06.550 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil
01/12/07 16:40:06.550 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil
01/12/07 16:40:06.560 -- Exiting GetFileVitals 0
01/12/07 16:40:06.560 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:06.560 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:06.560 -- Exiting GetFileVitals 0
01/12/07 16:40:06.920 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil to
C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:07.371 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:07.371 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:07.371 -- nwappCopyFileEx: Entering.
01/12/07 16:40:07.371 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil".
01/12/07 16:40:07.371 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CREATEFPDLETTER.DLL".
01/12/07 16:40:07.371 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:07.401 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:07.401 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil
01/12/07 16:40:07.401 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil
01/12/07 16:40:07.401 -- Exiting GetFileVitals 0
01/12/07 16:40:07.401 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.411 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.411 -- Exiting GetFileVitals 0
01/12/07 16:40:07.651 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil to
C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.782 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:07.782 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:07.792 -- nwappCopyFileEx: Entering.
01/12/07 16:40:07.792 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil".
01/12/07 16:40:07.792 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD ".
01/12/07 16:40:07.792 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:07.792 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:07.792 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil
01/12/07 16:40:07.792 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil
01/12/07 16:40:07.792 -- Exiting GetFileVitals 0
01/12/07 16:40:07.792 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:07.802 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:07.802 -- Exiting GetFileVitals 0
01/12/07 16:40:08.383 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil to
C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:08.513 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:08.523 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:08.523 -- nwappCopyFileEx: Entering.
01/12/07 16:40:08.523 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil".
01/12/07 16:40:08.523 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL".
01/12/07 16:40:08.523 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:08.553 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:08.553 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil
01/12/07 16:40:08.553 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil
01/12/07 16:40:08.553 -- Exiting GetFileVitals 0
01/12/07 16:40:08.553 -- Starting GetFileVitals for
C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.553 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.553 -- Exiting GetFileVitals 0
01/12/07 16:40:08.753 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil to
C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.873 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:08.873 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:08.873 -- nwappCopyFileEx: Entering.
01/12/07 16:40:08.873 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil".
01/12/07 16:40:08.873 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD ".
01/12/07 16:40:08.873 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:08.873 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:08.873 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil
01/12/07 16:40:08.883 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil
01/12/07 16:40:08.883 -- Exiting GetFileVitals 0
01/12/07 16:40:08.883 -- Starting GetFileVitals for
C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:08.883 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:08.883 -- Exiting GetFileVitals 0
01/12/07 16:40:09.264 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil to
C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:09.424 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:09.424 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:09.424 -- nwappCopyFileEx: Entering.
01/12/07 16:40:09.424 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd".
01/12/07 16:40:09.424 -- nwappCopyFileEx: targetFile =
"c:\lamda5\5101401PatchV2.cmd".
01/12/07 16:40:09.424 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:09.424 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:09.424 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401
PatchV2-3\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- Exiting GetFileVitals 0
01/12/07 16:40:09.434 -- Starting GetFileVitals for
c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- GetFileVitals: FindFirstFile found a file that
matched: c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- Exiting GetFileVitals 0
01/12/07 16:40:09.504 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd to
c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.574 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:09.574 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:09.584 -- Stop: ProcessFiles
01/12/07 16:40:09.584 -- Start: ProcessTextFiles
01/12/07 16:40:09.614 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:09.624 -- Start: ProcessRegSettings
01/12/07 16:40:09.664 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.305 -- Start: ProcessINISettings
01/12/07 16:40:10.335 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.335 -- Start: ProcessGroupLnkSettings
01/12/07 16:40:10.375 -- NWAPPSAGetObjectAttributes took 43 milliseconds for
OURCO_TREE
01/12/07 16:40:10.385 -- RunThirdPartyScript::Enter
01/12/07 16:40:10.415 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:10.446 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.446 -- RunThirdParyScript::Exit
01/12/07 16:40:10.546 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.566 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.576 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.586 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.586 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.596 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.606 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.606 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:10.616 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.626 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:10.626 -- NWAPPNetGetObjectAttributes took 5 milliseconds for
OURCO_TREE
01/12/07 16:40:10.636 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.646 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.656 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.876 -- NWAPPNetGetObjectAttributes took 5 milliseconds for
OURCO_TREE
01/12/07 16:40:13.79 -- Write Machine GUID Entry
01/12/07 16:40:13.79 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:13.79 -- Close stream list
01/12/07 16:40:13.79 -- Deleted szTreeName
01/12/07 16:40:13.79 -- After Calling NWAPPDistributeAppPA
01/12/07 16:40:13.79 -- Calling GetRegPromptedMacros()
01/12/07 16:40:13.79 -- Calling DistrbiuteAppAlwaysEx
01/12/07 16:40:13.89 -- NWAPPDistributeAppAlwaysPA: Entering. App = Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:13.129 -- NWAPPSAGetObjectAttributes took 44 milliseconds for
OURCO_TREE
01/12/07 16:40:13.159 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:13.189 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.219 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.240 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:13.250 -- No content found in any Dist Always streams -
exiting
01/12/07 16:40:13.250 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:13.280 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.280 -- RunThirdPartyScript::Enter
01/12/07 16:40:13.310 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.340 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:13.380 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.380 -- RunThirdParyScript::Exit
01/12/07 16:40:13.380 -- appLaunchApplicationWrapper::Exit 0 -
JWSDP1.3 - 'pre-installed' XML deployment files
In the current JWSDP-1.3 Tutorial, there is the following text on p. 810 (chapter on JSF):
"Running the Examples Using the Pre-Installed XML Files
The Java WSDP 1.3 includes an XML file for each example application in the <JWSDP_HOME>/webapps directory. This file causes an application to be automatically deployed when you start Tomcat...."
However, in the JWSDP-1.3 (installable download), those files are not there (I have downloaded and installed it twice).
I assume this is an error. Where are these files in the v 1.3 release? How are they used? There appears to be inconsitencies between the 1.2 and 1.3 directory/file locations as indicated in the Tutorial documentation.
ThanksYou are right. The location of the context files changed in
1.3. They are now located in <jwsdp_home>/conf/Catalina/locahost.
Tom -
Where to Get The Windows 7 Home Premium .iso File for Pre installed OEM of Windows
Hi Everyone, Need help here, please..Here is the situation, i want to upgrade my current pre-installed OS (Win 7 x64) Home premium in my laptop HP ENVY 4-1013tx Notebook PC to Windows 10. I'ts fine in the beginning until it shut down because of heat problem. When i try to turn it on, BSOD appeared. I've try to run in safe mode with have no luck, the same BSOD still appeared.I decided to recover it but no OS was detected in recovery mode. I browsed for many forums and they said that my HDD got bad sector so I remove my hdd from the laptop and attached it on my PC and run chkdsk but didn't solve the problem (chkdsk error : an unexpected error occured).So the last thing I've done was to format the HDD and install a clean Windows 10 and can not activate it without the product key. I just want to go back to my Win 7 and want to upgrade it to Win 10 again. Can I get the iso file ? My Product is B4P83PA#AR6 Thank You
Here You Go: http://www.microsoft.com/en-us/software-recovery
-
How to view pre-installed License file
Hi,
I was told we that 6296 comes with pre-installed 18-port license but I could find any.
There is nothing under installed license. All I can find is 180 days grace period.
Is pre-installed 18-port license viewable via license management?
Thanks,
HarryHi,
No, you cannot view your default license. you can only view additional license as well the grace license (180 days).
you can configure the port normally and the base license should cover up until the certain port number, before start using the grace license.
And the additional Modular also give you another base port license (another 8 port if I'm not mistaken), but you can use it in any port, not only on the module. when you unplug the module, the license is removed, and if the port is greater than the licensed, it will go to the grace license.
Hope it helped.
Thanks,
Pieter -
Bug: Logic 8 Can't open ANY of my pre L7 files
I know this has been discussed before. For some people, opening pre-L7 files in Logic8 works fine. For others, it's a problem.
But today I realized just how wide spread this situation is. Logic 8 will not open ANY of my pre L7 songs. NOT ONE.
That's literally hundreds of songs and projects on my hard drive that I will have to load into L7 one at a time to 'translate' so that L8 can read them. I call this a BUG because it's directly the opposite of what the manual claims Logic 8 can do:
"Opening Pre Version 8 Songs
You can open Logic Pro 5, Logic Pro 6, and Logic Pro 7 songs in Logic Pro 8. When
loading a song or project created in a pre-version 8 Logic variant, the format will be converted to the version 8 format. A Save As dialog will open, allowing you to save the project with a new name. The original version song will be retained."
I'm only posting this in the hopes that all of you experiencing problems with older projects will please LEAVE FEEDBACK on this topic with Apple. I don't want to lose access to years worth of archived work, and there's no good reason why L8 should lose the file import ability it had in L7. I do have L7 on an older machine, so I can laboriously translate the files 1 at a time if I have to. But keeping L7 and L8 installed on the same machine is problematic. And it's crazy to have to do this at all, since it's a basic functionality L8 should have if Apple would only get around to fixing it.
So please let Apple know if this matters to you. (Unless it doesn't and I'm the only one affected... just my luck).
The weird thing is that the "Can't Open" dialog that comes up on my system specifies that the files can only be opened by "Logic 7.2.1 or earlier". Wonder what was so special about 7.2.1???
?fermusic wrote:
have you tried to use *Import song* instead Open?
Have you troed to use rosetta version???
there is bug but it is related only with Intel Macs
G
Yup, and yup. I can run Logic 7 on my mac fine. And Logic 7 can import and play all my L5, 6, and of course 7 projects without a problem.
But Logic 8 CAN'T.
That's the problem. We're talking about literally hundreds of projects, and NOT ONE of them loads properly in Logic 8. Not a single one.
Clearly something in my default template makes Logic 8 unhappy. Don't know if it's the number of busses I use (16) or the effects routing or... who knows? What I do know is that a) Logic 8 should be able to open legacy files if it is to deserve the name "Pro", and b) I definitely do not have the time to open several hundred files one at a time in L7 and resave them.
And, even if I did resave all my version 5 and 6 projects in L7, the reality is they would still load improperly in L8 because of the revised bus/aux routing. When I open any of my L7 projects (which always ran just fine in L7), Logic 8's environment page gets completely messed up. The scroll bars stop working, making it impossible to see the channel you're working on.
Yes, I've emailed Apple's black-hole-o-customer-support. The silence has been deafening in response. If I weren't so lazy and cheap I'd be on Pro Tools I guess... But I know Logic like the back of my hand and I have work to do. Problem is, I'm starting to hate Logic like the back of someone else's hand which keeps slapping me in the face.
Ho and Hum. -
How can I transfer a pre-installed licence from one PC to another?
I have an old laptop that was purchased pre-installed with Photoshop Elements (looks like both version 7 and 9) but the laptop is on it's last legs and is about to be consigned to the scrapheap.
I have purchased a new replacement laptop and want to transfer the licence from the old one to the new one. I have searched the Adobe web site and have found and downloaded the installation files for both PE 7 and 9 but they naturally ask for serials during the install process. Because the original laptop had the software preinstalled there was no dvd or e-mail with the licence key. How can I interrogate the old laptop to find my key?
ThanksHow can I interrogate the old laptop to find my key?
If the laptop is running Windows, then run Belarc Advisor
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.… -
I bought my macbook with pages '09 pre-installed. I can find my disk anymore. Keynote and Numbers are working properly, but I want to reinstall pages because I am having a few minor issues with it. If I look at pages in the App Store, it shows that I would have to re-purchase it.
Short answer, no.
Fuller answer, the two are not the same and are not interchangeable. Yes, if you want the MAS version, you will need to buy it. But you should be able to hunt down the trial of the disk version out there on the internet, install it and activate it with your serial number. There is a thread somewhere in this forum from last year that has a link. I hunted it down for someone in a similar situation.
UPDATE -
I found the thread;
https://discussions.apple.com/message/20238439
The trial file still appears to be downloadable. This time make sure that you keep backup copies. It may disappear without notice. -
Storage Other still taking up a lot of space & is it ok to delete apps pre-installed in MBA?
Hi, I have checked the previous discussions on Storage HD problem in which suggestions to turn off backup, snapshots, even to using OmniDiskSweeper to reduce the space being used by Other but these suggested methods don't seem to work out for me.
I don't have auto backup turn on for Time Machine. If I don't have Time Machine on, do I still have to perform the Terminal function of "sudo tmutil disablelocal"?
I have used OmniDiskSweeper which revealed around 26.8GB files that I am pretty sure I need to keep, be it that the biggest size is the iTunes media folder in which converted audios are stored and taking 9.3GB of space.
Based on my screencap below on my Storage HD, I have basically nothing much in terms of Audio, Movies, Photos, Apps, Backups but almost half of the space is being taken up by Others, just mind puzzled me.
I know there are still space left and not critical but I just purchased this MBA last Christmas so I would like to be well prepared looking at the rate the Other storage is increasing each time. Any advice would be much appreciated. I am using external HD as Time Machine Backup and I do this backup manually. All my other audio, movies, photos, docs files are stored in another external HD.
My other question is that is it ok or advisable to delete apps that are pre-installed when we first received the MBA? I noted there are quite a number of apps that may not be of use (especially those under the Utilities folder) but pre-installed. In the event that I have uninstalled/deleted these pre-installed apps is there any way to restore or download them?? Are these apps the ones that are taking up the space under Other or they will just fall under Apps section? I also installed some widgets apps like around 8 of them - not sure how I can gauge the size of these widgets.
Thanks!blinkable wrote:
I don't have auto backup turn on for Time Machine. If I don't have Time Machine on, do I still have to perform the Terminal function of "sudo tmutil disablelocal"?
No, as you notice in this screenshot, "backups" is Zero. This is where local snapshots would be stored.
My other question is that is it ok or advisable to delete apps that are pre-installed when we first received the MBA? I noted there are quite a number of apps that may not be of use (especially those under the Utilities folder) but pre-installed. In the event that I have uninstalled/deleted these pre-installed apps is there any way to restore or download them?? Are these apps the ones that are taking up the space under Other or they will just fall under Apps section?
You can delete the Apps. You can reinstall them at any time by inserting disc 2 (the applications disc that came with your mac). I don't use GarageBand or iMovie, so I deleted them. Apps just fall under the "Apps" category. I qquestioned the Genius Bar as to what is in "other" and they said it is impossible to say exactly what is in that category, it is slightly different for each user. It does include the operating system among other things. They told me to thing of it as an "etcetera" category. -
Error in Pre-install of patch 9239089
we are in Pre-install Tasks of patch 9239089 for windows server 2008.
Executed the envshellPROD_srv-moc environment file then performed the below steps
Usage:
1. Create $ORACLE_HOME/appsutil/admin on the database server.
copy adgrants_nt.sql (Windows) from this patch directory to
%ORACLE_HOME%\appsutil\admin.
3. Set the environment to point to ORACLE_HOME on the database server.
4. Use SQL*Plus to run the script:
Windows:
C:\> sqlplus /nolog
SQL> @%ORACLE_HOME%\appsutil\admin\adgrants_nt.sql <APPS schema name>But go the error
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
ERROR:
ORA-01031: insufficient privilegesWhat need to be done to solved the error.
Thanks
Nawneet
Edited by: user13767670 on Jan 24, 2011 11:31 AMHi
I check the below link and it mentioned that by
"I removed the connect as sysdba line form the script and it worked.."
adgrants.sql issue
i added the full path
connect sys/manager@prod as sysdba
instead of
connect / as sysdbaand when i ran it it executed ,
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>sqlplus /nolog
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Jan 24 13:02:25 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
Connected.
--- adgrants_nt.sql started at 2011-01-24 13:02:35 ---
Creating PL/SQL profiler objects.
--- profload.sql started at 2011-01-24 13:02:35 ---
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>Can you tell me if that executed successfully , above is the output
Thanks
Nawneet -
How do I re-install software that came pre-installed on my mac?
How do I re-install software that came pre-installed on my mac?
I bought my first mac in 2003, in 2004 I bought MS Office: Mac. In 2006 I got another mac, this one (I'm pretty sure but not 100% certain) came with MS Office pre-installed. I'm still using that computer I got in 2006 (writing this message on it right now) and have been having problems with Word and have had no luck with trying to fix it. I recently came across my original installation disk for the version of MS Office I got in 2004. So, when I became frustrated trying to fix Word I just grabbed this old installer and reinstalled office, assuming in that moment that it was the same version I had been using. I got it all installed and working and went to load up my most recent document that I've ben working on and it won't load because it's a docx file. I don't know where else I would have gotten a new version of word, I'm not one for unnecessary updates and updating a word processor is about as unnecessary as it gets. I MUST have had a newer version of word pre-installed on my computer, because any time I've ever tried to open word files from this computer on my older mac the files wouldn't work, so any time I need to do that I either make a PDF or email myself the text.
Anyway, I'm assuming that apple has all my registration info on file and can confirm that I bought the software, can they provide my an installer? My other concern is that this computer was a christmas gift and was purchased by my dad, though I don't know whose name is on any kind of registration that may exist. The problem here is that he died, so I'm concerned that apple won't support my product because the original "owner" is deceased, even though I don't think he ever so much as laid a finger on this computer or even looked at it more than twice after he gave it to me.
What is my best course of action here?I would have to presume the 2006 Mac was used, and came with Office 2008 on it from the seller. Apple has never offered Office as a bundled purchase, and it is not pre-installed with any Mac.
Since you have the disk for Office 2004, the activation key should be on a sticker on the CD/DVD sleeve. As I recall, anyway. I no longer have my 2004 copy to check. If you have the key, it doesn't matter who it originally belonged to. You can still enter it and activate the software.
Once you have that installed, you can install the XML converter for Office 2004. That will allow you to open from all newer Windows and Mac versions of Office. The only things that won't necessarily convert are features that don't exist in Office 2004, and so can't be translated correctly, or at all.
Microsoft is saying Office 2016 for Mac and Windows should be available for the official release sometime either late summer, or early fall. So hold off purchasing a new version if you can. MS offers to reduced upgrade price for Office. You'd pay full price for Office 2011, and then again for Office 2016.
And just to note. Office 2008 and Office 2011 work fine in Snow Leopard. -
How do I remove the pre-installed Microsoft Office software from my T61 running XP-Pro?
I've reviewed the Lenovo support item on uninstall instructions but it does not say how to get the software off of my hard drive. Here's the Lenovo item.
To properly uninstall Microsoft Office 2007 Trial from the Lenovo preload, the following applications must be removed.
2007 Microsoft Office System
Activation Assistant for the 2007 Microsoft Office Suites
Business Contact Manager for Outlook 2007
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Uninstalling the Microsoft Office 2007 Office System will not remove all the components.
Uninstalling Business Contact Manager for Outlook will also uninstall MS SQL Server Components. During the uninstall routine, it will ask to delete the mail data file that contains the Business Contact Manager. Clicking OK, will remove the BCM, but not the SQL server apps, as the uninstall states.
From this point uninstall:
Activation Assistant,
MS Office 2003 Web Components
MS Office 2007 Primary Interop Assemblies,
MS Office Small Business Connectivity Components.
Then remove the MS SQL Server Components of server native client, server setup support files, and VSS writer.
Then remove the Activation Assistant shortcut from the desktop.
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them? I want to inactivate it because it is occasionally triggered somehow. Besides unintalling those preinstalled apps, I want to take all of the Office components off of my hard disk.
Add/Remove also has these apps but I'm thinking they are not part of Office -- please correct me if I'm wrong
Microsoft .NET Framework 1.1
Microsoft .NET Framework 1.1 Hotfix (KB928366)
Microsoft .NET Framework 2.0 Service Pack 1
Microsoft Web Publishing Wizard 1.52
FYI, I am using Lotus Suite and OpenOffice.
How do I tidy this up without creating more trouble? Thanks in advance for suggestions.lunagirl wrote:
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them?
No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
Rgds,
Ahti -
TS: Pre-installed Windows 8.1 attempt to install windows 7.
Greeting,
I recently get a Dell laptop with pre-installed Windows 8.1, but I find out there are many compatibility issues on Windows 8.1. So I decided to install Windows 7 ultimate 64 bit into the system without wipe out the windows 8.1. I followed a lot of threads
through the web. I am be able to finally solve the GPT booting stuff and get into the installation page, BUT there is another problem comes up. I cannot find a solution on the internet. The installation cannot be started because there
is not enough required space for the window 7 to be installed.
I have 100 GB partition of free space for the window to installed, so I believe it is the
System Reserved Space that makes the problem. However, I have not find a way to resize it no matter I use the third party tool or not, because it is
GPT Style.
Is there any way that I could install window 7 without wipe out the window 8.1??
I really need to use the windows 7 since most of my software that I use is not compatible with windows 8.1.
Thanks
CKI believe in theory you could install Win7 to a partition this way using an answer file. A problem would be that the OS won't boot if you deploy it using Setup by default. You would have to add a boot entry to the BCD for Win8.1 using BCDEdit, so that you
can have a dual-boot system.
What I would do instead is in Win 8.1 you can burn your recovery media. After doing so, you could do a clean install with Windows 7 and if needed you could reload Windows 8.1 using the recovery DVD.
Maybe you are looking for
-
"Optional" Paremeter/Prompts in report selection.
Post Author: heathdallison CA Forum: Crystal Reports I've been going through the forum looking for someone who has solved my particular problem but I haven't found it. I'm using crystal server XI and crystal reports design tool. I have a report that
-
Out to TV confusion !!!
There are some threads about this, but no clear answer has been given. I have the new MacBook without Firewire, but with the new Apple MiniDisplay Port. I want to use Final Cut Pro and monitor on my TV. I'm edditing DV footage. How can I see on my TV
-
Consignment settlement output title
Hi, we print a KONS output (MR_PRINT form) for consignment settlements (triggered by trans. MRKO). On the paper ouput we need to slighly rephase the name of the document printed in French language. For example - from "Consignment invoice" to 'Consign
-
Condition supplement in customizing of sales
hello Can someone tell me how to include a condition supplemet in the condtion record.That option is greyed out in my screen (VK11) I have gone though various post and found that this has to be included in the customizing of sales to have the option
-
Passing authentication info in soap header
We need to integrate a webservice in ALSB 2.6. This webservice needs authentication information (username and password) to be passed inside the soap header. I imported the wsdl into ALSB and created a business service on it. When I try to test one of