Pre loaded ipod how to choose which downloads to delete

My 6th generation ipod came loaded w/lots of NPR programming. I want to delete most of it, but save a few of them. How do I do this ?

Welcome to AD!
It's simple, but you have to have "manually managed music" unchecked in the ipod summary tab.
Once that is unchecked, you can go to teh iPod's music tab and check the option to "Only sync these playslists".

Similar Messages

How to choose which Aperture duplicate photo to keep

I use Aperture 3.4.5 on an iMac with OS 10.8.4 and, like many others who have written to this community, I have acquired lots of duplicates because some years ago I moved from iPhoto to Aperture. Those collections are mostly referenced in their original collections. I quite understand how these duplicates came to be. Using Duplicate Annihilator - Aperture I have found a great many (4 thousand) pairs of duplicate pictures out of a library of 60 thousand, and as has been explained by several responders, usually one is called iPhoto Original and the other iPhoto Externally Edited or iPhoto Edited. I have never knowingly used an external editor, but I do understand that, in iPhoto, just rotating the photo from portrait to landscape will create a copy, something that does not happen with Aperture. So that is why the dupliocates exist. My question is basically, now that I have found them, how to choose which one of the two versions to keep, because there seems no reason to keep these duplicates.
Obviously if I have made noticeable changes, or added many key words, then I want to keep that one. The duplicates in question are in two-photo Stacks. The original will have a size of 3 MB or 4Mb and the copy will have a smaller size, maybe as little as 1.5 or 2 MB. Sometimes the copy has just been rotated (and the file size is made smaller). With Aperture I can rotate the original iPhoto picture and maintain the larger size. Sometimes (but not always) there is a name change from xxxx to xxxx.jpg. But even without a name change, the edited or rotated file is smaller. I have examined the two images at high resolution, in Aperture, and I cannot see any difference, though they have very different sizes. This surprised me; there seems no benefit from the larger size, though there is a slight shift of the histogram of colors. (I do not plan to print any of these at high resolution, just show them on the iMac or a video.)
So my question is: is it desirable to keep the larger original file, though I do not see a difference in the image on my 27in iMac? I have many of these duplicates to choose between, and I would like to understand the consequences of my choice before I delete things.

I would keep the larger as long as storage space wasn't an issue and if it was I'd look at increasing storage before deleting the larger file.
Think of it this way the larger files contains more data, more data means not only a better image (even if you cannot see a difference on the monitor) but also more options when you go to edit the image.
Cropping is just one obvious example. A larger file will give you more options when it comes to cropping the image.
You can always create the smaller from the larger, you can;t go the other way. Once you delete the larger file the data is lost for good.

How to choose which one to use when using handoff if one has more than one phone with different network

I am using 2 iPhone with 2 different network. How to choose which phone to use when making a call.

Are you confirming your POP account is selected as the sending email account before the message is sent?
And regardless if the email is a new email or is replying to or forwarding an email received by the POP account and cofirming the POP acconut is selected as the sending email account, the message is sent by the Gmail account?
All message sent by the POP account are sent by the Gmail account?
If so, delete the Gmail account from your iPad and test if a message sent with your POP account which will be the only email account available with the iPad's Mail app is recieved from your POP account/address.
If not, something else is wrong or on play that has nothing to do with the iPad.

How to choose which playlists goes onto ipod

I want to put songs onto my ipod but not my "music" playlist, I have a playlist that I want put onto my ipod but just not all my music, does anyone know how I can choose which playlist gets put onto my ipod? Thanks

Welcome to AD!
It's simple, but you have to have "manually managed music" unchecked in the ipod summary tab.
Once that is unchecked, you can go to teh iPod's music tab and check the option to "Only sync these playslists".

How to choose which is default?

i am using iSync 2.3
how can i choose (in case of conflict) which device should be default? (my mobile or my address book).

You cannot predetermine which conflicting records will be retained and which will be tossed in the event of a conflict. The Conflict Manager will display both records side by side whenever there is a conflict that cannot be resolved by the Sync Engine, and ask you to choose which one to retain on a case by case basis.
You can instruct the Conflict Manager to handle any remaining similar records in the same manner, but you cannot review those records and must trust that they are indeed similar without being able to see any evidence that they are.

My G-drive slim is full and is deleting oldest files. How can I choose which files to delete?

My g-drive slim is full and deleting old files. How can I select files to delete?
What about deleting from "new" on the desk-top, which I assume is the hard drive.

My g-drive slim is full and deleting old files. How can I select files to delete?
What about deleting from "new" on the desk-top, which I assume is the hard drive.

How to identify which albums I deleted by mistake

Hello,
I have ripped 2403 albums from my CD collection on my iTunes. Yesterday I tried to install another two but I entered some info wrong and deleted the two new entries.
Unfortunately, I realized rightaway that my number of albums, which should have gone back to 2403, was now down to 2400. I have no idea what the 3 missing albums are; since I did not notice what happened during the deletion of my two new entries, they could be any of the other 2403.
Is there a way to find out which albums I deleted by mistake? I am thinking, perhaps, of an index list that would tell me what the last operations or modifications were made in iTunes, or the like.
Otherwise it is like trying to find three needles in a stack of 2403 other needles.
Thank you. M.

You can put everything into the "Automatically add to iTunes" folder, but there are occasional horror stories about those files going missing. You can also add the entire media folder, but occasionally that can create duplicate entries in the library, particularly if you have split the media folder to a separate location on a drive that isn't permanently connected to your computer.
tt2

How to choose which version to download??

I am trying to pick which version to download from home. The operating system I am using is Windows XP, so should I download Oracle9i Database Release 2 Client for Microsoft Windows 98/2000/NT/XP or Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP?? Thanks!

Client is only used to connect to a database on another machine. If you want a database on your computer, choose Personal Oracle.

Pre-Loading images How do i do it?

So I made this site and you can check out if you want at
www.protomediadesign.com I made it from an image in photoshop and
then spliced it up using image ready. As you can see, when you go
to the site it slowly loads each individual slice until the whole
image is complete. Why I want it to do, is show nothing, and have
the entire page cache into the browser, then once all the splices
have been cached, the entire page shows up in one piece, no
individual images. Is there a way to do this? I am kinda new to
this, I am using dreamweaver MX2004. I see there is an option under
the behaviors called preload image, but when I do that, and select
all the images that I want, even after that it still loads them
individually. I noticed that it says "onload" preload images, so
does that mean that I should have a pre-site, which just says
ENTER, which then will trigger all the images to preload on the
next page? Any help would be greatly appreciated and I hope this is
something simple to do. Thanks in advance for any help.
-Ryan

Preloading images won't help you a bit on this page. A 300K
page will
behave like a 300K page no matter how you load the images.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DOWNhiller1" <[email protected]> wrote in
message
news:e24gkf$c9o$[email protected]..
> So I made this site and you can check out if you want at
> www.protomediadesign.com I made it from an image in
photoshop and then
> spliced
> it up using image ready. As you can see, when you go to
the site it slowly
> loads each individual slice until the whole image is
complete. Why I want
> it to
> do, is show nothing, and have the entire page cache into
the browser, then
> once
> all the splices have been cached, the entire page shows
up in one piece,
> no
> individual images. Is there a way to do this? I am kinda
new to this, I am
> using dreamweaver MX2004. I see there is an option under
the behaviors
> called
> preload image, but when I do that, and select all the
images that I want,
> even
> after that it still loads them individually. I noticed
that it says
> "onload"
> preload images, so does that mean that I should have a
pre-site, which
> just
> says ENTER, which then will trigger all the images to
preload on the next
> page?
> Any help would be greatly appreciated and I hope this is
something simple
> to
> do. Thanks in advance for any help.
>
> -Ryan
>
>

TS3376 How to choose which device to find?

I have años ipad2, two iPhone all under same account. One iPhone is loose how can i choose that device and find It?

Welcome to the Apple community.
None of those devices can be the "major". The master data is that which is held in the cloud, all the other devices merely sync with that.

How to choose which monitor displays "full screen preview"

I have a dual monitor setup and have Bridge configurated so that on the left monitor I have the panes "maps", "filter", "keywords" and "content" and on the right monitor (which is a better and callibrated monitor) I have the pane "preview".
Now if I select one or more tumbnails in the "content" pane on the left monitor, they show up in the "preview" pane on the right monitor.
Until recent, when I selected a single tumbnail in the "content" pane (left monitor) it showed up in the "preview" pane (right monitor) and upon hitting the space bar it was shown full screen on the same right monitor and upon left-click on the full screen immage, I got a 100% preview, again still on the right monitor.
Now the problem is that suddenly, upon hitting the space bar, the full screen preview is no longer shown on the right monitor but is shown on the left monitor. (Same problem for the 100% preview).
I hope I made clear of myself and that anyone knows how I can change this back again?

The window was indeed expanded to both monitors and the monitors were aranged correctly but upon your sugestion I temporarely switched everything back to default "one monitor setup" and then back to "two monitor with extended window". I also did a reset of my workspace as sugested.
The result is that everything is back and working as it shood. Problem is solved.
Thank you very much.

How to choose which specs to get with 15 inch rMBP

I want to make the transition from a PC to my first mac and looking at the 15 inch rMBP. I just dont know which specs to consider upgrading or if the base model is the right one for me. I need a new computer for school and I am a general use computer user: school documents/presentations, online research (multiple open tabs), and a normal amount of video streaming. I think my use falls into the base model range, but I just dont want to get stuck with not enough. Is there a decent way to help decide?
Thanks

I am currently running about a 5 y/o Dell studio. It has done everything I needed so far. I need to uprgrade bcs the school I will be attending has software that my computer wont support it (I dont know what that means bcs im not computer literate). Over time my machine has been slowing and "not responding" might be a once a day occurence when multiple tabs are open and streaming video. current machine specs are:
Intel Core 2 Duo Processor 2.2GHz
4GB DDR2 RAM
320GB Hard Drive
Windows 7 Home Premium (64-bit)
I dont know how or if I can check how much of the memory i have used up, but judging by these specs I think the base model might be the best option. I am not huge into pic/video editing but may have a need for it occasionally.
Also, I dont need to purchase for a couple of months, would it be best to wait and see what apple does in the next couple months, i know speculation, or should I just get it and start getting used to the transition from PC to Mac.
again thanks

Multiple displays - how to choose which an Excel file will open in?

I have two displays hooked up to my Mac Mini (extended desktop). Each time I open an Excel spreadsheet it always open in the display with the menu bar, despite me moving and re-saving while it's in the second display.
Q. How can I get Excel spreadsheets to always open in the larger, second display?
I suspect it is a question of dragging the files window into the second display while either "cntrl" or "command" key pressed, but I haven't had any luck with that.
Mac Mini running 10.6.8
Dell 23" display (Apple menu bar appears here and where files always appear when opened)
Apple 30" Cinema Display (secondary monitor where I want the Excel files to appear when opened)
Thanks for the help-

FuryDev wrote:
Greetings,
I just got this url http://database.ittoolbox.com/documents/export-data-into-excel-using-plsql-scripts-13520
And it has 2 points.. however I want to add the point 1 to point 2. I need to consult a DB Table and add data in an specific column into the excel file, however I don't get where do I have to put the code from point 1 into the point 2 which must be in an oracle procedure. I should be able to write in any cell I want! And the file is not into the DB server, is in the developers PC instead.
Is there an easier solution?
Thanks in advanced,
Furyhttp://www.lmgtfy.com/?q=How+to+write+Excel+File+from+Oracle

How to choose which browser Earthlink email urls open in

Just got a new MacBook Pro. When I click on urls in emails in my Earthlink POP acct they open windows in Safari. I want them to open new tabs in another browser. How do I do that?

You could try changing your default web browser.
to do this:
open safari
go to the menu bar
click on the Safari menu
chose the menu item "preferences"
a new window will pop up called "preferences", in the top right corner of the window there will be a light switch with the word, "general" , click on it
The first pulldown menu should be called "Default Web Browser" , click on the pull down menu chose the browser you want.
click on the red dot to close the preference window.
quite safari

Have two Oracle installations in my pc how to choose which one is in work?

Hi,
I have two Oracle installations in my pc, i am not daring to remove one as i dont know which is i am using and which is not.
Because of this i am not able to connect to plsql developer,
Please help me to uninstall one instance.
Thanks,
Vinod

iMussVN wrote:
Just connect to SQL*Plus, write this command to know what instance is working:
select sys_context('userenv','db_home') from dual;
Have fun :)for some weird definition of "fun"!
bcm@bcm-laptop:~$ sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Jun 3 21:02:22 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
21:02:25 SQL> select sys_context('userenv','db_home') from dual;
select sys_context('userenv','db_home') from dual
ERROR at line 1:
ORA-02003: invalid USERENV parameter
21:02:27 SQL>

Pre loaded ipod how to choose which downloads to delete

Similar Messages

Maybe you are looking for