Pre - Low battery alarm and battery status don't match.....

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

This is the iphone forum.
However, let your computer run until the computer puts itself to sleep. Then plug it in and charge full as per instructions.

Similar Messages

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Does turning the LTE feature drain the battery life and battery lifespan?

Does turning on the LTE feature drain the battery life and lifespan of the iphone 5S. Also checking emails and going on the internet drains the lifespan of the battery?

yes
wifi and bluetooth does too
batteries lifespan is being zapped when used and also when not used
it will get worse and worse and in the end it will stop working

Songs and album covers don't match up?

On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
hope this helps, olly.

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Quicktime mpeg-2 and quicktime versions don't match

I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification.
Does anyone know why it tells me the versions are different when they aren't ?

sorry for not putting enough info.
i just bought the quicktime mpeg-2 installer and quicktime pro upgrade for quicktime 7 yesterday(3-15-2009). i installed the pro upgrade and the mpeg-2 installer.
i checked both quicktime and the mpeg-2 installer to see what versions they are. they both say version 7.60.92.0, yet i keep recieve this message:
"QuickTime MPEG2 failed to load because the versions of QuickTime and QuickTime MPEG2 do not match."
But they match exactly. I am stumped. i even uninstalled and reinstalled both of them but still the same message.

SIP and SMTP domains don't match

Hi,
We’ve a situation where SIP, SMTP and AD domain are different than each other and I am sure this will present integration issues at the least...
Speaking from LYNC 2013 and exchange 2010/2013 integration standpoint, could someone please point out to integration process under below circumstances where
SIP domain         uc.contoso.com
SMTP domain      contoso.com
AD domain          contoso.net
Also, how would exactly the logon will occur in this situation?
I'd appreciate if you could point me to relevant document please.
Regards, Pushkal MishrA, This posting is provided “AS IS” with no warranties and confers no rights. I request you to test the solution in lab and post successful outcome you should try this on production.

Hi Pushkal Mishra,
It’s recommend to use the same SIP and SMTP address.
But if they are not the same, they will still work properly if you take some additional work.
I’m assuming that you have published the correct SAN certificate that has every expected SAN name for each domain, then you have to create an additional SRV record for uc.contoso.com.
_autodiscover._tcp.uc.contoso.com
mail.contoso.com        443
In general, Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. But if the SIP and SMTP address does not match, you will receive
a security prompt “Lync cannot verify that the server is trusted for your sign-in address”.
To avoid the issue, the best solution in my opinion is to use SRV records for Autodiscover to redirect Lync to the mail.contoso.com A record. (Delete the Autodiscover A record)
Best regards,
Eric

System status and user status don't appear in maintenance order

I can't see the user status or the system status in the maintenance order header or equipment header or any report although when pressing the button information you can see it

Hi Michael Nawar ,
Please check have you define Status profile and status in T code OIBS ? , and for object like PM order whether you have assigned it to your defined order type in T code OIOG ?
and for equipment check in SPRO Master Data in Plant Maintenance and Customer Service >> Technical Objects >> Equipment >>Assign User Status Profile to Equipment Category.
Riyaj

Volume size and Capacity size Don't match

Hello,
I have a fileshare running Windows 2008 R2 that has a Dynamic Disk that is 1670.78 GB formatted NTFS. The problem is if I look at the properties of the volume it says that the capacity is 987 GB. I'm not sure how to get the capacity up to the
full size of the volume.
The histry is we had a 2003 x64 file share that started life as a scratch place to store files so was RAID 0, according to the original specs for the project that was what they wanted. After time passed the share became permenant storage and loosing
it was actually a problem. At that point I wanted to make it RAID 5. However I also was hoping to keep the Shadow Copies to enable them to find previous versions of files so I ended up creating an iSCSI target and mirroring them through windows,
which made a full backup including the copies. I then broke the mirror rebuilt the RAID and then re-mirrored to the new volume. However becuase of going from RAID 0 to 5 I lost some space so had to resize the volume. I used a 2008 R2 machine
to shring the volume and then raised the capacity back up to the full size. However the space available never actually grew.
At that point I figured the problem was from the machine still running 2003 R2 and having been touched by a 2008 R2 machine. So I scheduled an upgrade and the server is now running 2008 R2, however I am still missing 600GB.
I can't expand the Volume at this point since there is no free space on the disk, and if I try to shrink the volume I get the option of how much to shrink, then after saying ok I get the error: "The parameter is incorrect."   When I look in the
Application Log I see an error saying the volume wasn't defragmented because an error was encountered. "The parameter is incorrect. (0x80070057)"
Please let me know any suggestions or if there is any additional information that would be helpful.
Thank you,
Eric

Hello,
Here is the chkdsk result:
CHKDSK is verifying files (stage 1 of 3)...
406672 file records processed.
File verification completed.
3368 large file records processed.
0 bad file records processed.
0 EA records processed.
0 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
469986 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
406672 file SDs/SIDs processed.
Security descriptor verification completed.
31658 data files processed.
CHKDSK is verifying Usn Journal...
314844376 USN bytes processed.
Usn Journal verification completed.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
Windows has made corrections to the file system.
1035144191 KB total disk space.
912448340 KB in 341209 files.
    165660 KB in 31659 indexes.
         0 KB in bad sectors.
    809607 KB in use by the system.
     65536 KB occupied by the log file.
121720584 KB available on disk.
      4096 bytes in each allocation unit.
258786047 total allocation units on disk.
30430146 allocation units available on disk.
Even though it reports altering the free space when I go look at the disk I see this:
(This is the best command I've found to copy into here, if you know a better one please let me know)
DISKPART> detail volume
Disk ### Status         Size     Free     Dyn Gpt
* Disk 1    Online         1670 GB      0 B   *
Read-only              : No
Hidden                 : No
No Default Drive Letter: No
Shadow Copy            : No
Offline                : No
BitLocker Encrypted    : No
Installable            : No
Volume Capacity        : 987 GB
Volume Free Space      : 116 GB
I don't think this is just the difference between size and size on disk, I think for some reason my MFT or something is screwed up.
Please let me know what you would like me to try next.
Thanks,
Eric

How come playlists and total songs don't match up when syncing in iTunes?

Hello,
I own an iPod Touch 5G and sync it regularly via usb cable to my MacBook Pro 17", using iTunes 11. I seem to have a terrible time understanding the concept of syncing music/movies via the "selected playlists, artists, albums, and genres" option. That doesn't mean that I'm choosing to sync manually, just means that I'm syncing only certain playlists/content, even if done "automatically" whenever I connect device with iTunes, correct?
For some time now, well before iTunes 11 came out, I haven't been able to accurately sync the music and videos I'd like to "push" to the iPod Touch. No matter how many times I sync or think I'm removing content from the iPod touch by way of iTunes, I always end up with more on the iPod than I ever wanted. It seems like that capacity bar at the bottom of iTunes screen telling me what's on the Touch is a big joke, as it never seems to accurately show what's on there.
For example, I have a lot more songs and videos in iTunes than what my Touch has space for, so I can never have all my content syncing to the Touch. I have created numerous playlists inside iTunes, in fact, this is how I organize my music for listening. I was under the assumption that whatever playlists I check while inside of iPod touch area of iTunes when the devices is connected, those are the ONLY playlists and songs that will be on the iPod touch. This is never the case. After checking the desired playlists and syncing, I have the correct number of desired playlists on the iPod (let's say it's currently 10 playlists), but in actuality, when I go to the iPod touch after disconnecting from iTunes, there's a LOT more songs on iPod than just the ones within those 10 playlists. It's like when I got rid of some of the playlists on the iPod touch, the songs never got erased, only the playlists they were place in.
So, my question is, in short, how do I have ONLY the songs within my 10 playlists and no more after syncing with iTunes? Similar issue pertains to my synced videos/home movies. They are never erased from Touch, even though certain ones are unchecked within iTunes. If somebody could shed light on this issue, I'd greatly appreciate it! I feel like something designed to be so easy and logical has been anything but that.

when you play the CD in your laptop on your home screen a Cd should pop up under the name of the album. Than when you open itunes it will probly say something like "let this CD download" or something like that. If it doesn't than automaticlly while the CD is importing to your itunes a page will pop up with a progess of the CD download.
Hope that helped.

LIghtroom and Bridge Keywords don't match

I use PhotoMechanic (with the stationary pad setup) to ingest NEF images, then convert them DNG with DNG Converter. I add keywords using PhotoMechanic, Bridge and Expression media and Edit using PS to create web versions.
I'm trying to use LR 1.3 and starting to import them all.
When I look at the keywords in LR 1.3 the DNG are all the same, however the JPG in LR 1.3 are different from the other three (PhotoMechanic, Bridge, Expression Media). I've read metadata from the files in LR 1.3 and there is no change to the jpg.
It looks like LR 1.3 does not extract metadata from JPG the same way as Bridge does.
Any ideas why?

There are a lot of profiles for Raw-images but much less for JPG images.
Lr will display only those lens profiles that apply for the file format in question. So when you have a JPG image the profiles for Raw images will not be displayed in Lr, and vice versa.
If you don't have the correct lens profile in you list you have to download it.
For this you need the Adobe Lens Profile Downloader.
And for this program you need Adobe Air.
Download both programs from Adobe's website - they are free of charge.
Then install Adobe Air first, and when that is installed, install the Lens Profile Downloader.
Once it is installed just open it, it is self-explanatory and will display all available lens profiles once you have selected your camera and lens makes.

Final Cut Express HD and Animoto resolutions don't match

I imported a 720p video into Final Cut Express HD from Animoto.com (created online with Animoto and downloaded the MP4).
I added a song and a couple of bookend credits then exported to QuickTime Movie. The resolution of the FC export is significantly lower than the original MP4. Significantly lower. I've tried almost all the export settings in the "QuickTime Conversion" export, but nothing comes close to the resolution of the imported MP4.
Can anyone see what I might be doing wrong?

Have a read here:
https://discussions.apple.com/message/19146995#19146995
Sounds like your Easy Setup and clips are scrambled to me resulting in degraded footage.
BTW: MP4 should be transcoded to match an Easy Setup.
Codecs used in FCE are editing codecs, MP4 is for delivery.
Al

Mail files on server and webmail view don't match

Hi there,
First-time poster... sorry if this has been addressed ad infinitum.
We are running Msging Server 6.2-6.01 (according to 'imsimta version').
I have a problem with a user's account. The account has a mailQuota of 20Mb, of which about 89% is currently used. If I log in to webmail as the user and go to 'Manage Folders', it says that there are 13Mb of messages in the 'Sent' folder, in 19 messages. However, when I look at the messages in the 'Sent' folder through the webmail interface, the size of the 19 messages only adds up to around 4Mb. If I change the View dropdown from 'Default' to 'All' when looking at this folder in webmail, it shows that there are 435 messages in the 'Sent' folder. The 416 messages that appear when I select 'All' have a red 'X' mark in the envelope icon. If I get a shell session to the mail server and look in the user's 'Sent' folder, all the 435 messages are there in the filesystem.
From perusing the archives of this forum, it looks like I need to run 'reconstruct' for this user's account (or their 'Sent' folder) to fix this problem. I downloaded the Admin Guide and looked at the doco for the 'reconstruct' command, but it's a bit vague to me... So...
Should I run 'reconstruct' to fix this problem?
If so, what syntax should I use to just 'reconstruct' this user's 'Sent' folder?
What would the syntax be to 'reconstruct' all folders for this user?
I see that if I don't use the right arguments to 'reconstruct', it will reconstruct all accounts on the server, which I definitely don't want 8-)
Thanks in advance,
Guido.

Hi there,
First-time poster... sorry if this has been addressed
ad infinitum.
We are running Msging Server 6.2-6.01 (according to
'imsimta version').
I have a problem with a user's account. The account
has a mailQuota of 20Mb, of which about 89% is
currently used. If I log in to webmail as the user
and go to 'Manage Folders', it says that there are
13Mb of messages in the 'Sent' folder, in 19
messages. However, when I look at the messages in the
'Sent' folder through the webmail interface, the size
of the 19 messages only adds up to around 4Mb. If I
change the View dropdown from 'Default' to 'All' when
looking at this folder in webmail, it shows that
there are 435 messages in the 'Sent' folder. The 416
messages that appear when I select 'All' have a red
'X' mark in the envelope iconYep. These messages are "marked for deletion". The user hasn't "compressed the folders", which is what allows Messaging Server to delete the files overnight.
You can set an expiration rule for "deleted", and expire these automatically, if you like, or you can suggest the user set his mail client to "compress folders on exit", or even compress them, now.
This isn't something broken, so there's nothing to "fix.
. If I get a shell
session to the mail server and look in the user's
'Sent' folder, all the 435 messages are there in the
filesystem.
From perusing the archives of this forum, it looks
like I need to run 'reconstruct' for this user's
account (or their 'Sent' folder) to fix this problem.
I downloaded the Admin Guide and looked at the doco
for the 'reconstruct' command, but it's a bit vague
to me... So...
Should I run 'reconstruct' to fix this problem?
If so, what syntax should I use to just 'reconstruct'
this user's 'Sent' folder?
What would the syntax be to 'reconstruct' all folders
for this user?
I see that if I don't use the right arguments to
'reconstruct', it will reconstruct all accounts on
the server, which I definitely don't want 8-)
Thanks in advance,
Guido.

High-End headphones and iPod cases don't match

I just received 4 cases for both my Nano and iPod Video. They were ordered sight unseen long ago. There's a terrifying trend here. iPod Lounge will only give high marks to cases that cover everything with little holes for access. And so 3 of my 4 high end headphones will not fit in the holes cut out for them in these new cases. The plastic molding is just slightly wider than the standard Apple phones.
Etymotic ETY 4p, Shure E5c and Westone UM2 are all super-fi headphones endlessly discussed on Head-Fi.com. Read about them and you will buy. None of them fit and they all share the same connector molding.
Does anyone know of a kind of adapter that would have a female end to receive these and a male end that would fit the standard opening? Of course they all work without a case just fine. It's only that the trend now is to restrict the size of the opening to just the Apple size.

that is what happens when you don't look at what your product (by the way, "sight unseen" usually prefers to a home or other property)
iPod Nano 2GB | Accessories: Belkin Carabiner Case for iPod Nano (black)

Phone usage counter and carriers counter don't match?

I have been pretty consistant about reseting my usage counter on my iphone on my billing day. And yesterday i got a notice saying i was at 65%. I checked my phone and only showed ~37mb of in and out usage but when i logged into att it says i'm at 160mb. For the most part the usage looks right but there are 3 occasions where its in the 65mb, 40mb and 25mb. Way above my usual 1-4mb usage per session. Customer service only had "well then upgrade your data plan" to say but i don't want to do that till i know whats wrong.
Is there anyone that can explain why they are so different and any way to get att to remove those 3 oddballs cause its seriously like day 4 of my billing cycle.
iphone 4
gsm 5.0.1
icloud over cellular syncing is off.

Think i figured it out. It appears to be a bug with icloud as the phone was not connected to wifi but the laptop it plugged into was. For some reason it then sync'd with icloud anyhow racking up my data. Just annoyed that this transfer was somehow not put into the counter.

Pre - Low battery alarm and battery status don't match.....

Similar Messages

Maybe you are looking for