Pre-Made Effects and Color Change

When I add a pre-made effect to type. How do I change the effects color? The effect Im trying to use is the underwater one. It always stays this ugly blue tint, and I need the effect to be green. Ive tried changing it in the attributes window, but it only effects the text minus the underwater effect.

Actually David, I did mean the Style tab.
You see, either way, you have to select each keyframe and then make the color change to make this fix. But instead of going to the Effects tab and having to select the ShadColor parameter each time you select a different keyframe (and then selecting a new color and confirming), you can just leave the Shadow tab open on the Style menu, select the color swatch there and pick the color you want for each key. Doing it in the Style tab saves you a few clicks each time.
About the only time I use the Effects panel is when entering parameters that don't have an interface component (such as Accelerate) or to get a quick view of what parameters are being animated.
Bony

Similar Messages

Troubles with effects and colors in FCPX 10.1.4

Hi to everybody.
I have a problem with colors using the effects.
Lets look at more less neutral picture (picture no 1)
ftp://ftp.strefa.pl/Zrzut%20ekranu%202014-12-16%20o%2022.34.30%20%283%29.jpg
If you look at the RGB Parade you see the down part of the RGB distribution is ok.
But if I start to use any effects the Parade changes in this way:
ftp://ftp.strefa.pl/Zrzut%20ekranu%202014-12-16%20o%2022.34.54%20%283%29.jpg
You see, that the down part of the color distribution (for all 3: red. green and blue) is cut-off, even when I use the effects which shouldn't influence on the color.
I spent some hours to find any logic, and I discovered following regularity:
1. The source movie I imported came from Nikon D7100 (.mov), 1920/1080i
2. The behavior of FCPX during the playback of those clips is crazy and ustable (few seconds like in pict.1 few second like in pic. 2).
3. I have instaled the newest versions of Nikon D7100 firmware and of course FCPX 10.1.4. I think (not 100% sure) the trouble with FCPX appeared after 10.1.4 update.
4. I don't have any troubles with other camcorder (Canon XF 100)
Did somebody have simillar effects / troubles with FCPX? Any solutions? I have a job to do, and this situation completly devastating my deadlines.
Regards
Rafal Seredynski
iMac i5 2.5 GHz, 8GB RAM, AMD Radeon HD 6750M 512 MB

You would probably find more direct help by talking to other Nikon shooters who use FCPX. M
I don't know anything about the Nikon codec or why it might be giving you trouble while others do not but have you tried simply transcoding the footage to ProRes422? Your files will expand by a factor or three or four but you will not have these difficulties.

Video clips not diplaying in viewer and color changes in canvas

I have been using Final Cut Pro 7 successfully on my computer for some time. Suddenly I am getting white preview and canvas screens. The video clips are not previewing (but audio is present) and the canvas show dark color outlines and extremely degraded image. I have uninstalled and reinstalled final cut pro but there is no change.

I trashed preferences which had no effect and then entirely uninstalled fcp using fcp remover which removes all related files and then reinstalled it and the problem remains.

Font and color changes not executed

In setting up a new blog page, I've selected a specific color for the titles of my entries, and a typeface. But on the blog page itself, once it was published to MobileMe, the title is gray and the font is not what I selected. Why is it not responding to the changes I've made, and saved? Thank you!

Yes, I have cleared the browser's cache and no change. I'm trying to think here...when I'm making these changes, I am doing it in the "entries" section, because in the "blog" section these changes are not available for me to make.
blog template has three entities: 1) blog summary 2) blog entries and 3) blog archive
changes that you made in 'entries' section won't reflect the blog summary/archive because they are rendered separately.
You can change 'titles'/head lines font face in blog summary/archive by slowly click on the title three times (all titles will be hilited) then you can change font face.
but, you can not change the color, because the titles are hyperlinks to link back to the entries. you can change their colors in theme/domain.site2's xml or you willing to post edit blog summary/archive CSS file.

Calendar font and color change no reason

I am attempting to create a calendar with the new Iphoto and I have to say it is harder to use then the old one. I am trying to manually enter birthdays. Typed couple of entries with Hoefler Text size 8 and worked. All of a sudden tried typing in another date, same month, and Font changed color to orange and is larger but same Hoefler Text setting and size 8 still appear. What am I doing wrong? how do I fix?

There are a few animated titles with fonts that cannot be changed. Lens Flare is one of them.
Here's more information:
http://support.apple.com/kb/PH2212?viewlocale=en_US
Matt

Calculated value and color change

I am a newbie desiging a form in Livecycle.
Have a table with some calculated fields - using formcalc.
I want to change the color of these fields based on the calculated value but I don't know how to have multiple events occurring in the one cell.
I can get it working if I put the color change script into the exit event of the cell but as it's a read only cell, the user will not be exiting the cell. I have had no luck putting the color change script elsewhere. Any help would be appreciated.

Actually, in full screen mode the top is cut off! I never noticed that since I always use full screen. This only happens in ACR. All other screens are fully represented. I may cut back on the height adjustment and see if I can see the top. Thanks for pointing it out, Ramon.
Back to the problem at hand, if you notice, all sliders are at -0-, and if you could look at all the adjustment panels, everything is neutral. So, what is it adjusting?
If I open a RAW file I also get the triangle, but when it disappears only the slightest change is noticeable in the histogram, and nothing in the image itself. This is true even with the .nefs tweaked.
Finally, the image 1 is correct with respect to the same file in PS. I compared the screen shot to the full image side by side, in PS. Image 2 is not. If I do a tweak in ACR then open in PS, it's not what I want to see.
This particular frame is tagged with the ACR icon in Bridge, but I have other tiffs that are not, and the same thing occurs.
FAPP, I cannot not color correct in ACR with a tiff. I do it as an .nef

Ready-Made Effects and Object Oriented Timeline

As an actionscript programmer and designer all we need to
effects. But when i searched for ready-effects there is no an
add-on for this. But Adobe must have done this until now. Why there
aren't lot of ready-made effects in Flash?
And one more suggestion to Adobe developers: Every object
must shown as an object in timeline. Not as a layer part. Thus,
programming ability of Flash will arise.

After having problems with spam block software malfunction, I was able recover the following comments to the EXPRESSIONFLOW article Object-flow Programming - Merging Dataflow and Object-Oriented Programming
Written by Zen:
Some combination of data-flow and object-oriented programming, I think,
could make a great impact on sysytem development. However, I see it in
slightly different way than yours....
Written by Matt Holt:
I don't believe NI can get object-flow programming to move far enough
into mainstream that Forbes would cover it. NI has a bit of a
stranglehold on LabVIEW with it's price as compared to say… VS2005. It
seems that by promoting it as "easy to use" that NI may have shot
itself in the foot….
Written by Jim Kring:
Hi Tomi, In my opinion, LabVIEW's native object-oriented programming
capabilities (LabVOOP) do not currently provide a complete tool for
allowing us to implement our OOP system designs. Nearly all of my
system designs require distributed active objects by reference. I think
that National Instruments certainly can evolve LabVIEW to address such
requirements, but I think that it is not a real focus of NI....
If anybody else is missing their comments, I'm sorry I was unable to recover them. Please repost your comments, I appology for the inconvenience.
Tomi Maila

Video white balance levels not showing, so video effects and color editing won't work

I've watched white balance tutorials, and I tried clicking the dropper onto the viewer to change the color. But, in the gray box above it there are normally red green and blue lines, but I have nothing there. I think this is preventing any edits to my color balance, can anyone help?

Well, no offense, but you seriously should read the C4D help. That's normal specular shading behavior and it is uniform acroos the plane because you obviously haven't defined any scene lights and use the default viewport light. Read up on how to create materials and adjust there properties and then learn the fine art of scene lighting as well as how to use object buffers to isolate objects with multipass renders.
Mylenium

Mixing Black and White effects and color to one picture in iPhoto

is there any way to combine these to effects to have part of a picture black and white and another part color?

No, not with iPhoto. You'll need a 3rd party application like Photoshop Elements which can select areas in a photo and desaturate it, leaving the rest in color like this. This is another example of what you can do with it.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, QT 7.1.3, Mac OS X (10.4.8) 22 LCD, 200G/160G FW HDs, Canon SD700IS, i850 & LIDE 50, Epson R200, 30G iPod

CYMK TO RGB importing and color changing

I don't know if this is something really basic but I finished a piece of artwork. I copied an image that I drew in illustrator and pasted it into an empy photoshop document. I was working on CYMK in illustrator but RGB in photoshop. I thought that might have been why the colors were off. Like the blacks in CYMK are not fully black unlike RGB. So I made a new RGB document in illustrator pasted the image from the previous CMYK document and tried to convert the colors.(through swatch and even edit colors). This new image I posted again into photoshop again the colors were off. Last try I made another new RGB document. I painted another image this time using RGB black from the beginning and it was not a copied image from the previous document but rather a new image that I just drew. Still when I imported into Photoshop the black was not fully black. I zoomed in and notice it wasn't black even in the 2 illustrator documents in RGB. I don't know what I'm doing wrong and why the color isn't fully black would anyone be able to help direct me or teach me what is wrong here? Is it something I'm doing wrong in photoshop or in illustrator or both?

what is wrong here?
On the most elementary level: Your color management settings do not match and there is a profile conversion happening. Make sure to use the same color profiles (plain sRGB) in both apps, calibrate your monitor, use the correct monitor profile for proofing.... Other things that could be relevant:
- you are still mixing your colors in CMYK in AI, even when working in RGB, resulting in crooked values and possibly different gamut
- you settings for rich black are set in such a way, that all blacks are converted to rich black
- you are using AI transparencies and blending modes, which simply work differently in PS
- OpenGL usage in PS may affect display of your artwork
In any case, this is nothing a short forum post can answer. You really need to read up on color management and how it works in different programs to resolve these issues.
Mylenium

Dynamic Text and color changes......

In some cheap website creating software I have you can turn
text into rich text and change the color of individual words inside
the same text box full of text. Is there anyway to do that in flash
CS3?

Thanks clbeech I actually found an easy way to do it. For
your dynamic text box you can click the "html" box in the
properties window for that text box. (Its a little square box with
this <> inside it and its just to the right of the singleline
and multiline box drop down.) You can then select the text you want
to edit inside the text box and change its font/size/color as well
as turn it into a dynamic link and it will do so without affecting
the rest of the text in your text box.

Font and Color Changes

I have created my website pages using color on my
fonts and selecting specific fonts. When I publish the pages and
look at it in the browser the fonts are different and all color is
gone from my text. I have just created my first ever website. What
is happening?

On Thu, 8 Mar 2007 08:35:19 +0000 (UTC), "harborsedge"
<[email protected]> wrote:
>
I have created my website pages using color on my
fonts and
>selecting specific fonts. When I publish the pages and
look at it in the
>browser the fonts are different and all color is gone
from my text. I have
>just created my first ever website. What is happening?
Here's a list of fonts found on Windows PCs and Macs. If
you're not
using one of them then you can't guarantee it will be
installed on the
target computer.
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.htmlhttp://www.ampsoft.net/webdesign-l/ WindowsMacFonts.html
Show us the page you made so we can help you.
Steve Fleischer
steve at flyingtigerwebdesign dot com
Hong Kong

Font and Color Changes on Hyperlinks

I am going mad on iWeb trying to format hyperlinks. No matter how I format the text, the moment you enable it as a hyperlink it defaults to whatever Apple set it at. The inspector shows all the right parameters but the link is unchanged.
Does anyone have any ideas? Thanks!

Unfortunately, the answer is there is no way within iWeb to change the hyperlink format. Perhaps Apple will add this feature in a future release.

Flash crash and color changes

in CS3 I have jpegs and gifs along all with a background that
is the same color across photoshop and flash, and it looks fine in
the development environment, but when I make a swf file the colors
shift and it no longer looks correct.
I also get artifacts in the file when using a mask,
horizontal lines.
see:
http://circularcreation.com/clients/PeterGregoire/

try clicking File> Publish settings and raising the jpeg
compression quality to 100. Also, you're better off importing
.png's into flash instead of jpg's and gifs if possible, better
quality and compression then a jpg.
-Line

5900 heard a load snap and colors changed

Playing the GTR demo at 1024x768 on Sunday I heard a loud snap like a twig breaking and the screen had a very red tint to it. I turned the monitor off and on again and still the same. Restarted the computer and still no change. Turned everything off and back on and things were normal again. The monitor has had a loud whine lately when starting up showing the windows splash screen, but is quiet when playing games or at the desktop.
The 5900 isn't very old and I have an Antec Smart 550w power supply. The CPU temp was 127*-f at the time. The monitor was bought in 1998. I am assuming it is the monitor, but would like to double check since it hasn't done it since and I don't have another to try.

were did the snap come from,pc or monitor

Pre-Made Effects and Color Change

Similar Messages

Maybe you are looking for