Pre/ Post and Post pan colours

Hi,
This ain't exactly a show stopper, but..
In the mixer you can send the feeds as pre, post fader, or post pan.
These 3 options are supposed to change the colour of the send box.
Pre is green, post is blue, and post pan is supposed to be orange- but it's not. It is also blue.
As I said, not exactly worth getting too freaked about!

Well, there goes my 5 minutes of fame!
Thanks!

Similar Messages

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

Pre-populate and post populate fields

What is the difference between pre-populate and post populate fields.
How we test the pre-populate and post populate fields.

Parth, one problem with your approach is he will submit PDF and therefore you won't be able to put the PDF in a variable that's suppose to contain just xml.
The prepopulation should be the same. If you start off with an xdp, then you will call a render service that merges data with your xdp to create a PDF.
Now when you submit, you will submit the entire PDF back in the Document Form variable. In Workbench, you can use the FormDataIntegration service to extract data from that PDF that's being stored under Document Form var/object/document and put it in an xml variable. Then you can just use xPath to do your condition.
I'm assuming you'll just pass that same Document Form variable to the next step, because if you do any change to the PDF it'll brake the signature.
Let me know if I missed anything.
Jasmin

I need to organize medical photos. They are pre-op and post-op photos. What is the best way to organize them. should I use iphoto or is that too much trouble.

I need to organize medical photos. They are pre-op and post-op photos. What is the best way to organize them? should I use iphoto or is that too much trouble? Since they occur on different days, organizing by event does not seem appropriate. Also, organizing by face is not always possible as some are close up photos of an individual eye. Surely, this has been done before, and I don't want to spin my wheels reinventing this.

Who can tell with that amount of information to work with?
iPhoto is not limited to Events or Faces as organizational tools - Albums, Keywords, various forms of metadata can be leveraged for use as well, and these are often more flexible. Really it's up to you to look at the tools available and see if they suit your usage scenario.

Networkmanager dispatcher - no pre-up and post-down support

Hey guys,
i swichted some weeks ago from ubuntu to arch, and my system runs like it should. with one exception. Cause im using arch on a laptop und change locations (my home, university, parents house, ..), i wrote i little dispatcher script that do diffrent things based on the essid i connected to. But i recognized that the dispathcer only use the up and down action. is there a possibility to add the support of pre-up and post-down actions, or anything similar? i red that netcfg can do this, is ther a way to combine it?
greetz corubba
EDIT: i noticed that the action up is called after the interface is up, and down after it is brought down. So im looking for a pre-up and pre-down action.
Last edited by Corubba (2010-11-15 13:20:45)

Corubba wrote:Hey guys,
i noticed that the action up is called after the interface is up, and down after it is brought down. So im looking for a pre-up and pre-down action.
hi all,
in the past days I also trid this out and you are right: in "pre-up" is called _after_ a connection have been established to a network, exactly like "up" does.
should we maybe fill a bug in orger to get this fixed?
regards,
Guglie

Pre invoice and Post invoice

Hi All,
What is the difference between Pre Invoice and Post Invoice?
regards
shashikanth naram

Hi,
When 'GR-based IV' is flagged in PO, Now when GR posted with reference to PO item serves as reference document for follow-on postings. This Ref Doc-LFBNR is linked to invoice posting,This assignment between GR and invoices can be seen PO history tab -GR/IR assign
when GR based IV is not ticked then the LFBNR is blank, hence it will not propose any value in Miro
Please also refer following note
1827732 - Valuation when GR-Based IV (EKPO-WEBRE) is set in the PO item.

Pre-export and post-import tasks

oracle8i/windows 2000 server.
i would like export my database from my organisation and import into my local
machine at home.
what are the precautions,tasks and post tasks
,i have to take during import and export.
c.santhanakrishnan.

Why are you exporting your organisations db to import at home? Are you aware of the privacy issues this raises? Do you have approval from your organisation?
Exporting -
o NLS_LANG is set correctly
o Available space on disk
o consistent = y
o recordlength=65535
o direct=y
o log=<logfile_name>
o do you require grants, indexes?
o A feedback for progress,
o But even with consistent = y that is table consistent and there is a probability you may run into a problem with FKs (usually when exporting large amounts of data) and tables in the beginning of the export have child tables near the end of the export which (the child tables) have records inserted during the export which won't have a parent record on import and will be rejected.
Importing -
Some depend on the data volume. Do you want to -
o NLS_LANG is set correctly
o drop, re-create indexes to speed up import
o put the database in NOARCHIVELOG (if possible)
o need to also create public synonyms
o check triggers and if they will fire?
o need to create the schema/user to import (if it doesn't exist in the import database and is not a full export) ?
o do the tablespaces that the export was taken from exist in the import database?
o disable/enable FK constraints
o enough UNDO space
o enough archive log space (if in ARCHIVELOG mode)
oset a buffer (size depends)
o set a feedback to monitor progress (or check rows_processed in v$sql)
o if data already exists in the tables, does it need to be truncated (which raised other issues, constraints etc, take a backup prior to truncate?)
I probably missed stuff too.

Difference POST and post

Hi,
I just noticed when i write mxml code for httpservice, when
specifying the method type there it is listed with POST(with
capital letter) and post(with small letters ) is there any
difference between these two.
regards
kumar

Hi
The first is a BAPI so it's a method (RFC enable) to post an accounting document, POST_DOCUMENT is the fm to update the database only, so probably it can be called by BAPI_ACC_DOCUMENT_POST
That means all data are formatted in according to the accounting tables (BKPF, BSEG .......and then the fm POST_DOCUMENT is called in order to save them in database.
All updating database processes are usually included in fm, UPDATE MODULE enable, in order to run the saving in update task process, triggered as soon as a commit is called
So DON'T USE the fm POST_DOCUMENT to create an accounting document, because you should know all FI processes very very very well in order to fill correctly all accounting table, else you risk to create inconsistences in the accounting data.
Max
Edited by: max bianchi on Nov 29, 2010 4:17 PM

Storing by trigger with pre time and post time

hi,
I am acquiring sample rate of 1000 samples/sec. i am using digital inputs for storing start and stop. when the digital input is high it should start storing and accordingly user has to specify the number of samples or time and data appended before storing starting. i.i pre time or pre samples has to be added before start storing the data. also for stop storing the data post time or samples has to be added.
how to do this..? can i have a sample vi?
Regards,
Balaji DP

may be its helpful to you,By using value signaling we can generate the event whenever true occur in Digital input channel (daq),in that particula event case we can append the old data from file like tdms etcc.
Attachments:
1.png ‏14 KB

What is the Difference Between the Pre-Upgrade and Post-upgrade in UMT in SAP BO

Could anyone give me details.

UMT is used to upgrade and migrate from older version to newer version.
There is no pre or post migration terms used for UMT.
Check the guide for more information.

Thinking of pre installation and post installation

Hi,
I understand the following is very common question, but I need to know the answer specific to my case.
my case:
My production database has around 100 tables in a single database/instance (no clusterred yet); 3 of tables are growiing very fast, in less than 1 month can use more than 1TB hard disk space, and we have to keep 6 months' data (so in a half year, disk space will be used up 6-10 TB by these 3 tables; every day there are lots of operations on these tables, update, insert and query (no delete, every operation invoked heavy API stored precedure.
questions.
1. if applying cluster, installing in 2 nodes, 5 nodes, 10 nodes, can I expect linear performance increasing to 15%,18%,20%?
2. install nodes in one physical box (usiing vmware) better or 1 node 1 box better, in terms of performance?
3. afer installing Grid, the database install in one of those node or iin another box?
4. any doc telling how to install/configure the database upon cluster/nodes?
Thanks
John

992202 wrote:
Firstly install nodes, to be able to build up a cluster, on top of it, install multiple database instances, then we can configure a RAC database, which will still look like a single database from external client point of view.Correct. Grid installation first to build the cluster. Then RAC installation to provide a cluster database infrastructure across grid nodes. Then create a physical cluster database with a database engine on each cluster node.
now going to the point how I think and expect performance increasing against my case.
without clustered database (say in a standalone or singleton instance), executing 100 database operation (query, insert, update, by calling API, stored procedures) takes 5 minute; now in RAC database in which 5 nodes, 5 database instances in 5 physical machines, 100 operation may distribute to all nodes, namely each database instance may just need to handle 20 request (ideally); this way performance should be increased lots.Emphasis on should.
Yes, RAC provides for scalability. However, no cluster (RAC and anything else) is capable of simply taking any program (or stored procedure), and make that now run faster across multiple cluster nodes.
The program (stored proc or SQL in RAC's case) need to be able to run in parallel, deal with concurrency, and do this in a thread-safe way. The cluster provides the tools for this. The program needs to support or use these tools.
And, I also think, in 10 nodes cluster, it's better that installs 10 database instances than installing only 5, in terms of performance.Of course, you want to use all cluster nodes. But you can for example create server pools in the cluster and more than one cluster database - and run these on your cluster. A cluster does not necessarily mean only supporting a single cluster database.
A report shows CPU usage is very high constantly during executing (now we use 32 CPU in one box), however I/O and network usages look normal.Unlikely that a RAC will do better in this case - running processes within the same h/w boundary on 32 CPUs will usually be faster than running the same processing across 16 server nodes, with 2 CPUs per server.
Can I still expect linear performance increasing? if no, what can RAC database help me out, or any other way can help me my case?As I said - RAC provides incredible scalability (e.g. my biggest RAC does up to 35,000 rows inserts per second, and uses parallel processing to process 30+ million row data sets using several table joins in less than 120 seconds).
But for any cluster - scalability needs to be part and parcel of the software loads run on that cluster. If the workload of the software cannot be parallelised, if workloads are not designed to be scalable, then no amount of clustering will improve the runtimes of such workloads.
My suggestion is to first identify the CPU related performance problem you have. You need to know WHAT the problem is, in order to decide on how to address it. And whether RAC is a solution to the performance problem.

Attention moderators - Duplicate posts and posts without searching

Hi there
Am I the only one who feels this forum has been watered down constant posting from users who couldn't be bothered to try using the search key.
Is it possible that we can start deleting these posts so users are forced to use their search key instead of forcing other users to do the work for them?
I've heard about this happening in other forums in an attempt to stop some of the bad practices that have crept in and I'm hoping the same can be achieved here.
Regards,
Athol

What works well in the forums I activately moderate is if community members use the Abuse Reports button (see the yellow triangle in the top right task bar of each post).
This helps moderators who check the log to home in quickly on threads which are violating the forum rules or not contributing to the quality of the SDN forum discussions.
The posts are then rejected, or the threads locked. In extreme cases, repeat offender's user ID's are deleted.
I can strongly recommend reading the forum rules (see the sticky thread at the top of the forum page).
Cheers,
Julius
(Netweaver Security + ABAP forum moderator)

Pre and post sql

Hi xperts,
what is the functionality of Pre SQL and Post SQL in source Qualifier Transformation??
Thanks,
pcs

Hi,
Pre SQL is the sql statement to be executed before perfoming the mappings on the target table and post is to be executed after performing the tasks.
post sql is that if any errors occur we can send an email or write logs to know the error.

Would like project entry on Recurring JEs and Posting Templates

From our customer:
Version: SAP 2007A PL 49
Description of requirements: (When setting up recurring entries and Posting Templates there is no place to enter the project code. There is a field to enter the distribution code. For some monthly recurring entries such as vehicle insurance, we wish to record a project code on the recurring journal entry which represents the vehicle.
Valid as of: (Not a legal requirement)
Business needs: (We use project codes to record all expenses against a given area. Automated postings such as recurring journal entries that do not post to the project codes jeopardize the accuracy of reports afterwards.)
Examples: (When creating a new Recurring Journal Entry, there should be a field displayed that allows the user to enter a valid Project Code just like there is for Distribution (Cost Centre) Code. Then when the Recurring Journal Entry is added on the proper date it will contain the valid Project Code.)
Current Workaround: (Manually add the project code to the newly created journal entries after the fact. Hard to find entries and high possibility to miss entries or make mistakes.)
Proposed solution: (Please see response under Examples.)
Sally Weinrauch,
Senior Support Analyst
Coastal Range Systems Inc.
Recipients of: SAP's Partner of the Year 2007 & 2005,
North America's Top Ten 2008, 2007 & 2006.
Edited by: CRS Notes on Jul 22, 2009 10:39 PM

Hi
Adding "project" into Recurring posting and Posting templates has been already considered for B1 later version.
Yan

BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

Pre/ Post and Post pan colours

Similar Messages

Maybe you are looking for