Pre-production Planning

Hi, How to do pre-production planning for the possible production with current resources in a stipulated time and resources required for completion of specified production qty with the stipulated time. i also need to condisder maintenance schedule etc.pls advise.

Dear Yadav,
In my understanding LTP is one way of doing the pre-production planning for a material or a list of
material through simulated planning and using the simulated planned orders.
This can be used for doing vendor analysis and also to check the capacity anaylsis.
Based on this you can modify the production plan or go for extra shift or extra resources to meet the
plan or adjust the plan as per the available capacity.
To know explore more about LTP,check this thread,
LTP - CM38
Just hold on for other's suggestions on the same.
Regards
Mangalraj.S

Similar Messages

  • UCS pre-production test plan from cisco

    Hi,
    Is there a pre-production tests plan from cisco to validate that a new UCS setup is A-OK?
    I found some stuff on google. But nothing from cisco.
    Thanks for any help.
    Stephane.                  

    Hi Stephanie,
    I am unaware of a particular pre-production test plan from Cisco to validate UCS setup but I do believe that Advanced Services is available in this regard, to assist. However, I suspect that this is not the level that you are requesting.
    Thanks.
    -Bruce

  • FCS for animation pre-production

    I'm searching for an asset management solution for our animation production. The assets in this case will primarily be designs and storyboards. None of which would be used directly in a FCP project. This would all be part of pre production.
    As the artwork moves through the pipeline, having one central location for everyone to work from would be great. Someone recommended FCS and though it looks great I'm wondering if this will work for us.
    Thanks.

    Final Cut Server would be a great solution for this needs regardless if you plan to use the digital assets in FCP or not. Final Cut Server can be installed both Windows and Mac OS X. I am assuming that at some point you may use After Effects to produce an animatic and Final Cut Server can be use for this as well. Also if you have a lot of image sequences Final Cut Server 1.5 has native support for image sequences which will also automatically create preview version of the image sequence.
    Hope this helps.
    Nicholas Stokes
    XPlatform Consulting

  • Sales order reference at the time of Production Planning

    Hi all,
    Is there any Hard check (or) Validation at the time of assigning sales order in Production order?
    to be more specific
    At the time of creating production plann, we assign open sales order  to that. Again if new production plan is created and with out knowing if he assign the same Sales order number system should block  it.
    Is there any solution for this
    Regards
    Shashi

    Shashi,
    Couple of important things to be noted.
    1.  How could you determine if the first user linking the SO to the Production Order really selected the correct one.  It could be very much possible that the same Sales Order linked to the another Prod Order is actually correct.
    Unless you have a business validation procedure to check this it will not be of much value to prevent duplicated.
    You can read about the transaction notification stored procedure using the link below
    https://service.sap.com/sap/support/notes/1011154
    This transaction notification is a stored procedure available in a company database and can be accessed from SQL Server Management Studio
    Suda

  • Help! I just put a US sim card (i am from Canada) and got a monthly pre paid plan, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

    Help! I just purchased a US sim card/monthly pre-paid plan (i am from Canada) as I am travelling in the states for a month, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

    Hold on,
    Have you talked to your carrier to confirm the unlock?
    What was the procedure you did to unlock the phone?
    Standard unlocking procedure once processed by the carrier:
    Backup in iTunes
    Erase the phone (ignore restore terminology here)
    Plug the phone to the computer and then launch iTunes
    Wait for unlock notification.
    Restore the backup.

  • Table for Product Plan Status

    Hi,
    In "Basic Data" tab of Product Plan Detail, there's Status field which is the "User" status for the Product Plan.  I am looking for the table which contains this Status field.  DPR_PROJECT table only contain "System" Status field.
    Thanks & Regards,
    Tony

    Hi
    PO status is stored in Structure not in the table.
    Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
    You can also get the information from the table EKKO, EKPO, EKET,EKBE
    Hope it helps
    thanks/karthik

  • Sending Production Plan to Vendor / Supplier

    Dear Sir
    Ours is a production unit (assembly line) we use lot of components. So I want to know is it possible to send plan directly to Vendor by E-mail from SAP.
    Thanks & Regards
    Vishal

    Hi Vishal,
    Sending out Production Plan to Vendors by email is possible but given nature of dataset involved (not documents in form of Production Orders) it may not be a very feasible option. Instead either develop a report to extract relevant Production Plan data and send it out as email.
    But better look at Supply Chain Collaboration applications like SNC Supply Network Collaboration that has Outsourced Manufacturing processes catering to these kind of supplier / vendor collaboration requirements.
    Hope this helps.
    Somnath

  • Setting Office 2013 on Windows 8x in Pre-Production Mode

    Hello
    We are in the process of evaluating ADRMS for protecting documents. Currently, I have ADRMS running on a Windows Server 2012 x64. I have 2 other machines which talk to this - one with Office 2013 installed on a windows 8.1 set in production mode and another
    similar machine having  a custom program based on ADRMS SDK 2.1 APIs. 
    How can I set the server running ADRMS as well as Office 2013 in pre-production mode? If there are any documents on this, can this be shared or pointed to please
    Thanks
    SN

    Hello,
    Does anyone know how to do this or is this done differently?
    This is what I want to test to start with - I have a document (docx) and I have protected it using ADRMS SDK2.1 based custom client application. I want to test this protected document by opening using Office 2013 and see if the permissions I set are working.
    The custom application is installed on a machine (8.1, set to pre-prod by setting MSIPC & uDRM \Hierarchy to 1)  connecting to a server (Win 2012, set in pre-prod by setting DRMS\Hierarchy to 1) with both ADRMS & ADDS installed in it. For some
    reason the client works even with uDRM/Hierarchy set to 0, so not sure what is the relevance of uDRM. 
    I have the Office 2013 installed on a Windows 8.1 different from the above 2 machines and connected to the above domain. But I am unable to open the document protected by the custom RMS app. In fact, when I try to protect a document created using Word 2013
    on this machine it says "The system cannot find the file specified"
    00000001 0.00000000
    [23512] /-----------------------------------------------------------------------
    00000002 0.00000000
    [23512]  Public API called: IpcFreeMemory
    00000003 0.00000000
    [23512]   pb:   0000005F3D432070
    00000004 3.09854221
    [23512] /-----------------------------------------------------------------------
    00000005 3.09854221
    [23512]  Public API called: IpcpBootstrapUser
    00000006 3.09854221
    [23512]   pConnectionInfo:   NULL
    00000007 3.09854221
    [23512]   pUser:   PCIPC_USER
    00000008 3.09854221
    [23512]     -->dwType:    1
    00000009 3.09854221
    [23512]     -->wszID:     [email protected]
    00000010 3.09854221
    [23512]   pToken:   PCIPCP_TOKEN
    00000011 3.09854221
    [23512]     -->dwType:       2
    00000012 3.09854221
    [23512]     -->pcvTokenData: NULL
    00000013 3.09854221
    [23512]     -->cbTokenData:  0x00000000
    00000014 3.09854221
    [23512]   pContext:   PCIPC_PROMPT_CTX
    00000015 3.09854221
    [23512]     -->cbSize:       40
    00000016 3.09854221
    [23512]     -->hwndParent:   NULL
    00000017 3.09854221
    [23512]     -->dwFlags:      0x00000000
    00000018 3.09854221
    [23512]     -->hCancelEvent: 0000000000000558
    00000019 3.09854221
    [23512]     -->pcCredential:
    00000020 3.09854221
    [23512]       NULL
    00000021 3.09854221
    [23512]   pvReserved:   NULL
    00000022 3.09866428
    [23512] [msipc]:Disabled SSPI auth for RMSO
    00000023 3.09868693
    [23512] [msipc]:IpcTokenCache::GetCachedToken Creating a new IIpcToken
    00000024 3.09872818
    [23512] [msipc]:+LoggedOnUserToken Created
    00000025 3.09875011
    [23512] [msipp]:+ippGetUser
    00000026 3.09876585
    [23512] [msipp]:+ippGetUserForUserInfo
    00000027 3.09879208
    [23512] [msipp]:+IPPUserIdentity::InitializeIdentityForUserInfo entered
    00000028 3.09882998
    [23512] [msipp]:+IPPLicenseStore::GetMachineCert
    00000029 3.09911990
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
    00000030 3.09911990
    [23512] HRESULT = 0x8004f00d
    00000031 3.09914303
    [23512] [msipc]:+ippActivateMachine
    00000032 3.09933877
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
    00000033 3.09933877
    [23512] HRESULT = 0x8004f00d
    00000034 3.09944534
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
    00000035 3.09944534
    [23512] HRESULT = 0x8004f00d
    00000036 3.09955812
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
    00000037 3.09955812
    [23512] HRESULT = 0x8004f00d
    00000038 3.09959126
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
    00000039 3.09959126
    [23512] HRESULT = 0x8004f00d
    00000040 3.09977841
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
    00000041 3.09977841
    [23512] HRESULT = 0x8004f00d
    00000042 3.09981275
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
    00000043 3.09981275
    [23512] HRESULT = 0x8004f00d
    00000044 3.09994483
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
    00000045 3.09994483
    [23512] HRESULT = 0x8004f00d
    00000046 3.09997869
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
    00000047 3.09997869
    [23512] HRESULT = 0x8004f00d
    00000048 3.10005188
    [23512] Exception at d:\bt\2274\private\client\source\port\windows\ipcossecuritygeneral.cpp(90): hr = CDRMtoSP::CreateMachineCerts()
    00000049 3.10005188
    [23512] HRESULT = 0x80070002
    00000050 3.10007334
    [23512] [msipc]:Error encountered while activating the machine, hr = 0x80070002
    00000051 3.10011625
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ippmsdrmwrapper.cpp(650)
    00000052 3.10011625
    [23512] HRESULT = 0x80070002
    00000053 3.10017371
    [23512] [msipp]:-ippGetUser HR=80070002
    00000054 3.10020924
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\framework\win7\win7ippuser.cpp(92): ippGetUser(IPP_GU_CONNECTION_INFO, pConnectionInfo, dwFlags, ipcContext, m_pUser)
    00000055 3.10020924
    [23512] HRESULT = 0x80070002
    00000056 3.10022879
    [23512] Error HRESULT 0x80070002 mapped to 0x80070002
    00000057 3.10026145
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\api\ippapi.cpp(2525): IppGetUser( IPP_GU_CONNECTION_INFO, &pUserFromConnInfo, pUserFromConnInfo.wszID ? dwFlags : (dwFlags | IPP_GU_NEW), pIpcContext, &hUser)
    00000058 3.10026145
    [23512] HRESULT = 0x80070002
    00000059 3.10028005
    [23512] Error HRESULT 0x80070002 mapped to 0x80070002
    00000060 3.10030127
    [23512]  Public API IpcpBootstrapUser exited with return code 0x80070002
    00000061 3.10030127
    [23512] \-----------------------------------------------------------------------
    00000062 3.10036349
    [23512] /-----------------------------------------------------------------------
    00000063 3.10036349
    [23512]  Public API called: IpcGetTemplateIssuerList
    00000064 3.10036349
    [23512]   pConnectionInfo:   NULL
    00000065 3.10036349
    [23512]   dwFlags:   0x00000000
    00000066 3.10036349
    [23512]   pContext:   PCIPC_PROMPT_CTX
    00000067 3.10036349
    [23512]     -->cbSize:       40
    00000068 3.10036349
    [23512]     -->hwndParent:   NULL
    00000069 3.10036349
    [23512]     -->dwFlags:      0x00000003
    00000070 3.10036349
    [23512]     -->hCancelEvent: 0000000000000558
    00000071 3.10036349
    [23512]     -->pcCredential:
    00000072 3.10036349
    [23512]       NULL
    00000073 3.10036349
    [23512]   pvReserved:   NULL
    00000074 3.10039186
    [23512] [msipp]:+ippGetUser
    00000075 3.10040927
    [23512] [msipp]:+ippGetUserForUserInfo
    00000076 3.10043311
    [23512] [msipp]:+IPPUserIdentity::InitializeIdentityForUserInfo entered
    00000077 3.10046244
    [23512] [msipp]:+IPPLicenseStore::GetMachineCert
    00000078 3.10075140
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
    00000079 3.10075140
    [23512] HRESULT = 0x8004f00d
    00000080 3.10077405
    [23512] [msipc]:+ippActivateMachine
    00000081 3.10079026
    [23512] [msipc]:ippActivateMachine Skipping Machine activation because of Offline mode
    00000082 3.10082817
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ippmsdrmwrapper.cpp(621)
    00000083 3.10082817
    [23512] HRESULT = 0x8004020d
    00000084 3.10084748
    [23512] [msipp]:-ippGetUser HR=8004020d
    00000085 3.10087729
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\framework\win7\win7ippuser.cpp(92): ippGetUser(IPP_GU_CONNECTION_INFO, pConnectionInfo, dwFlags, ipcContext, m_pUser)
    00000086 3.10087729
    [23512] HRESULT = 0x8004020d
    00000087 3.10089636
    [23512] Error HRESULT 0x8004020d mapped to 0x8004020d
    00000088 3.10091305
    [23512] [msipc]:+IpcGetTemplateIssuerList IppGetUser Failed hr = 0x8004020d
    00000089 3.10093284
    [23512] [msipp]:+IPPLicenseStore::GetCLCWithRAC
    00000090 3.10112619
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
    00000091 3.10112619
    [23512] HRESULT = 0x8004f00d
    00000092 3.10114932
    [23512] [msdrm]:-CDRMStore::GetLicense type=3 hr=8004f00d
    00000093 3.10118246
    [23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ipplicensestore.cpp(399): m_cdrmStore->GetLicense( DRM_LICENSE_TYPE_CLC, pwszSearchPattern, uSearchPatternCount, fDefaultForUser, puCount, prgwszLicense, prgwszRACs)
    00000094 3.10118246
    [23512] HRESULT = 0x8004f00d
    00000095 3.10121131
    [23512]  Public API IpcGetTemplateIssuerList exited with return code 0x8004020D
    00000096 3.10121131
    [23512] \-----------------------------------------------------------------------
    00000097 3.10124445
    [23512] /-----------------------------------------------------------------------
    00000098 3.10124445
    [23512]  Public API called: IpcFreeMemory
    00000099 3.10124445
    [23512]   pb:   0000005F3F8B0DB0
    00000100 3.10132265
    [23512] /-----------------------------------------------------------------------
    00000101 3.10132265
    [23512]  Public API called: IpcGetErrorMessageText
    00000102 3.10132265
    [23512]   hrError:   0x80070002
    00000103 3.10132265
    [23512]   dwLanguageId:   1033
    00000104 3.10215545
    [23512]  Public API IpcGetErrorMessageText exited with return code 0x00000000
    00000105 3.10215545
    [23512] \-----------------------------------------------------------------------
    00000106 4.53870678
    [23512] /-----------------------------------------------------------------------
    00000107 4.53870678
    [23512]  Public API called: IpcFreeMemory
    00000108 4.53870678
    [23512]   pb:   0000005F3D4324F0
    00000109 109.36756897
    [24016] SHIMVIEW: ShimInfo(Complete)
    00000110 118.99750519
    [24088] SHIMVIEW: ShimInfo(Complete)
    Any help will be much appreciated
    Thanks
    SN

  • Daily Production Plan query changes

    Dear Experts,
    I was tried  to do a daily production plan query,  but i need to add one more feild in the below query, (ie) In sale order Document, Row level feild of Quantity ( RDR1,Quantity) should be in that query,
    SELECT T0.[ItemCode],T1.[ItemName], T0.[PlannedQty] as 'Planned Qty', T0.[DocNum] as 'Doc No', T0.[PostDate], T0.[OriginNum] as 'Sale Order No', T0.[CardCode], T0.[CmpltQty] as 'Completed Qty' FROM OWOR T0 join OITM T1 on T0.Itemcode = t1.ItemCode WHERE T0.[PostDate] >='[%0]' and T0.[PostDate] <='[%1]'
    Plz help me.
    Thanks and Regards,
    Manikandan

    Hello Manikandan,
    You can add the sales order into the production order, but you should now: there is no connection defined between sales order lines and production order, only the item code can be used as reference to sales order lines
    I mean:
    *if you have the same item in sales order lines in different position the query always multiplies the result. *
    So you can join the sales order header for Origin Number and DocNum, and sales order lines by Itemcode
    SELECT
         T0.[ItemCode],T1.[ItemName], T0.[PlannedQty] as 'Planned Qty', T0.[DocNum] as 'Doc No', T0.[PostDate],
         T0.[OriginNum] as 'Sale Order No', T0.[CardCode], T0.[CmpltQty] as 'Completed Qty',
         T3.[Quantity] [Sales order Qty], T3.LineNum [Sales order Postion]
    FROM
         OWOR T0 join OITM T1 on T0.Itemcode = t1.ItemCode     
         left outer join ORDR T2 on T0.[OriginNum] = T2.[DocNum]
         left outer join RDR1 T3 on T2.[DocEntry] = T3.[DocEntry] and T3.[ItemCode] = T0.[ItemCode]
    WHERE T0.[PostDate] >='[%0]' and T0.[PostDate] <='[%1]'
    Regards
    J.

  • Daily production plan in manufacturing shop floor

    Hi, we want to generate 2 different weekly production plans based on 1) roh available 2)customer delivery date. pls advise how to generate same.

    Hi
    There is no planning method in SAP based on raw materials. if you know how much finished product can be made out of one raw material then you can use SOP and create a prodcution plan as inactive version.
    For customer delivery date, if you know the cumulative requirements then place this quantity in SOP as the sales plan with delivery dates and create synchronous production plan and save it as another inactive version.
    Once you take a decision on which version to be used you can copy the version to a active version and transfer to demand managment and run mrp which creates planned orders.
    Make sure you use backward scheduling in the material master
    Thanks
    Krishna

  • G/L's in production planning

    Dear all,
    i have on question kindly answer me if any one knows.
    in standared practies of (SAP) PRODUCTION PLANNING how maney G/L's has to be assigned and what are they.
    thanks in advance.
    best regards,
    irfan

    HI
    generally it depends on your production process. at the time of implementation, consultant maps as per the requirments given by FI team
    for example if you have production stages like finished product(stage 1 ,stage 2) this willl have one GLs,other semifinished (stahes) will havwe GLs, RMs,and consumptions GLs,GRs GLS etc.
    -ashok

  • Production Planning Report

    Hi,
    My Requirement is This report should provide comparision of Standard V/s Actual Machine hours utilization for a particular resource or for all the resources utilized in a given period and its variance. If the variance percentage is more than 10% it should be highlighted in Red colour as it is an area having potential / scope for improvement.
    For this Scenerio please give me solution and tell me which info cubes, data sources , info objects i have to take please tell me i am new to production planning.
    Thanks & regards,
    Rajesh.

    Hi,
    Check below thread for more information,
    [Production planning Business Content Data sources and cubes;
    Regards,
    Durgesh.

  • SAP PP (Production Planning) Master Data Definitions

    SAP PP (Production Planning) Master Data Definitions and Transaction codes.

    SAP PP (Production Planning) Master Data Definitions
    • Factory Calendar
    • Material Master
    • Resource • Bills of Material (BOM)
    • Production versions
    • Master recipe
    Factory Calendar: The factory calendar is defined on the basis of a public holiday calendar. The public holiday and factory calendar is a central module in the SAP System. It is assigned to a specific plant during the initial system setup and therefore used in many areas (e.g. in Logistics and in Human Resources) in the system.
    Material Master: Material master comprises if all the basic data of the material for each department. The data covers all the relevant information required for the transactional flow e.g. sales, Planning, Production, Quality, Purchasing, Costing etc. Material master covers all the descriptive and control data and the flow of information depends on fields maintained within it. The integration of all material data in a single database object eliminates redundant data storage. Material Masters are created once and can be changed or extended whenever required
    Bill of Materials: Bill of Materials or commonly called BOM is a formally structured list of components that make up a product or assembly. The list contains the material number of the component together with the quantity and unit of measure. BOMs are used in their different forms in various situations where a finished product is assembled from several component parts or materials. Resources: Resources are production facilities and persons involved in a production process that have capacities. They are subdivided into categories to specify their suitability for certain purposes or their use in certain processes
    Product Versions: A production version determines which alternative BOM is used together with which task list/master recipe to produce a material or create a master production schedule. For one material, we can have several production versions for various validity periods and lot-size ranges. The production version determines the following:
    • The BOM alternative for a BOM explosion.
    • The task list (master recipe) and any alternate, as needed.
    • Lot-size restrictions and validity parameters.
    Master Recipes: A master recipe defines the following data that is required for the production of materials without relating to a particular order: processing steps, resources, material components, and control information for the process control level. Master Recipe enables to plan the production of materials (products). Therefore, Master Recipe is used as a template for process orders and run schedules as well as a basis for product costing. In a Recipe
    • The Phases (work steps) to be carried out during production.
    • The activities to be performed in the operations as a basis for determining dates, capacity requirements and costs.
    • The use of materials during production.
    • The use of resource.

  • I bought a second hand ipad mini without a simm chip. Can I buy one at the Verizon store and get a pre-paid plan?

    I bought a second hand ipad mini without a simm chip. Can I buy one at the Verizon store and get a pre-paid plan?

    IPad mini unless branded for Verizon use will not be accepted for prepaid use. Apple will tell you that the mini is compatable with all carriers, you simply walk into the carrier of choice and ask for a nano Sim.
    You pop it in, you turn on cellular if not already on and follow the screen prompts to get you up and running. Its quite easy.
    I found my wife's mini only functions on Sprint, T-Mobile and AT&T who I set up service with.
    Verizon blocks the activation due to the emeid of the device. Apple says it is fully operable on Verizon but they don't let you activate unless its purchased from them or from Apple to use on their system.
    Good Luck

  • Clear the History Data Automatically in Production Planning Table MF50

    Dear Friends,
    I have the problem to set the Production Planning Table (Txn MF50) to
    clear the history data automatically. Currently, all the history data
    in the planning table has to be cleared manually.
    Appreciate your help.
    Rgds
    Zahari Yusof

    instead of just removing the whole history like private browsing do, i just want to remove browsing/download history and form&search. i didn't want to remove cookies and active logins, heheh. thank you

Maybe you are looking for