Pre-programmed keys

I have a Q10. In my Bold I could make a one key phone call (say H for home) from any window. Not anymore. Am i missing something?

Hey gkk,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Open the phone application on the BlackBerry Q10 and bring up the dial pad. Then press and hold any key to setup your speed dial.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Pre-programmed voice mail key

I am trying to modify the pre-programmed voice mail number in my bionic (*86) to include pauses and waits separating various prompt numbers, etc. I found under voicemail settings where you can perform this mod and it accepts and displays the changes made, but when the green "voicemail" touched on the home page, only *86 is prompted and none of the modified prompts appear......I have managed it to make it work by creating a new 'contact", naming it "voice mail", then creating a separate quick dial on the home page, but utilizing this method and not the pre-installed green prompt will not allow user to see the number of voice mails waiting like the green dedicated prompt displays.
Surely there is a way to go in and modify the default number of the pre-installed voice mail prompt as there surely could be other required numbers besides *86 customarily used by Verizon???

Usually you can go to Settings>Call Settings>Voicemail Settings and change it there..

Programming Key Functions in Web Dynpro Java

Hi, "Amigous"
How can I Programming Key Functions in Web Dynpro Java, like F1, F2, F3...??
Thanks in advance.
P:D. I don´t have Swine Flu.

Hi,
Please see the below link.
[http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf]
Regards
Krishna

Mobile Devices (Android and iOS) cannot Connect to WS 2008 RRAS L2TP VPN with Pre-Shared Key

I have my Windows Server 2008 standard installed with RRAS service and configure with L2TP VPN with pre-shared key. Services such as Active Directory, DHCP and DNS are not installed. The Internet connection doesn't pass through a router to my server machine.
I have the Verizon fios Internet cable plugged in to the server machine directly.
PCs running Windows and Mac OS X can connect to the server without problem. When I tried to connect by using android or iOS mobiles and tablets, they cannot connect to the server. If I change the VPN type to PPTP, the mobile devices can connect successfully
but I would like to use IPSec/L2TP since it's more secure.
I tried so hard to look for the solution for this issue on Internet but I had no luck on that. Can anyone please provide me some help, please ?
Thanks,
CK

Hi CK,
I think we may need to create a policy in Network Policies. Please follow the steps below,
Right click Network Policies, Click New.
Enter the policy name, click Next.
Click Add, select the Day and Time Restrictions, click
Add.
In the Day and Time Restrictions, choose Permited for
all, click OK.
Click Next five times(leave everything default), click
Finish.
Move the policy to top and try to connect with your device.
If issue persists, please make sure that the Connection Requet Policies have been configured properly.
For detailed information about how to create a network policy, please refer to the link below,
Configuring NPS network policies
http://technet.microsoft.com/en-us/library/dd441006.aspx
Best Regards.
Steven Lee
TechNet Community Support

Pre-Program DME

Hi All,
I am basically from SAP HR background. But we are facing an issue, where when we run the pre-program DME, the corresponding SAPScript form is not being generated. We have asked the client team to give us more information but we do not have any at the moment. They have just told us that we need to maintain SAPScript forms in transaction FBZP and then we run the pre-program DME.
Can you please guide me regarding what could be the reasons the form is not being generated? How should I start my analysis, given that I have absolutely no knowledge of FI?
Thanks and Regards,
Vidya.

Thanks Jason, after applying the corrections will get back to you about result.

Pre-programmed sequence for data bits on parallel port.

I've found and made a bunch of vis that allow for interactive high/low control of the 8 data bits on the parallel port. I want to control each pin with a pre-programmed pattern of bits. Any ideas?

A U8 is an unsigned 8 bit number. To create one place a number control down on the front panel. Right-click on it and select Representation>>U8. To create an array of U8s you place an array control down, and then drag the above numeric into the array shell. You now have an array of U8s, which you can expand and place things in it.

Pre-programmed text

Does anyone know how I can set up pre-programmed text messages?

Your form data hierarchy is different than mine. You need the brackets also, otherwisethe first assignment statements executes only.
// form1.#subform[0].DropDownList1::exit - (JavaScript, client)
if (!(this.isNull)) {
var char = this.rawValue;
TextField41.rawValue = "Data " + char + "1";
TextField42.rawValue = "Data " + char + "2";
TextField43.rawValue = "Data " + char + "3";
Steve

Pre-programmed labs

Why does HV not have pre-programmed fields for extremely common blood tests such as the CBC, the Comprehensive Metabolic Profile, and Urinalysis like it does for Blood Glucose and Cholesterol measurements? It's extremely cumbersome to enter these
values one by one in the Lab Test Results section.

Note if you're lucky enough to be using Windows 8, our HealthVault app does support many common panels in the Lab Results section. Just start typing the panel name and we'll show matching ones and auto-populate for you.
This functionality is something we'll move onto the web and such as well ... there's just always too much to do and we get to it as quickly as we can. Thanks for the feedback!
---S

WLC: Need to change pre-shared key with a script

Hello,
I need to change pre-shared key on a Guest Wi-Fi with a script.
Does anybody has an idea how to find the right entry in the WLC 2125 MIB to change it through SNMP?
Gorazd

Hi,
That is a textFramePreferences property
mySelection.textFramePreferences.verticalThreshold = Number (range 0- 8640)
ID Object Reference says:
"...The maximum amount of vertical space between two paragraphs. Note: Valid only when vertical justification is justified; the specified amount is applied in addition to the space before or space after values defined for the paragraph..."

AnyConnect and Pre-Shared Keys

Hello,
I am extremely new to AnyConnect and VPN, so I have a few questions for you guys. I am trying to configure an AnyConnect Client on Android to connect to my ASA 5505 via IPSEC. It's configured with (I believe) IKEv1 with pre-shared key and group identifier. I think IKEv2 is certificate based only, and I am not using certificates at this time. I can't seem to find any settings in the app to configure it this way... Can the AnyConnect client connect to this type of connection? If so, what may I be missing? I can configure the default VPN client built into Android and it works fine, but I am being told to use the AnyConnect client. If you need more info, let me know, I'm not sure what to put on here to give the info needed to help. Thanks!

Believe I found my answer:
Cisco AnyConnect VPN
Q. I see that the Cisco AnyConnect Secure Mobility Client supports IPsec. Will Cisco AnyConnect Secure Mobility Client work with Cisco VPN 3000 Series concentrators?
A. No. Cisco VPN 3000 Series concentrators support IPsec/IKEv1. Cisco AnyConnect Secure Mobility Client Version 3.0 and greater supports IPsec/IKEv2 connectivity but not IPsec/IKEv1.
From http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5743/ps5699/ps10884/qa_c67-712937_ns1049_Networking_Solutions_Q_and_A.html
If there is a workaround or something, please let me know. If not, oh well!

ASA Iphone, Ipad VPN client pre-shared key (PSK) special characters bug

I ran into this in a deployment of IPSec clients with apple ipad and iphone native vpn client. Here are details:
Cisco ASA 8.2.5 OS
Ipad, running 5.0.1
Iphone i4S, running OS 5.0.1
Special characters make your pre-shared key more secure, so i used a password generator app to make one that coincidently included a " (quotation mark). After configuring this PSK on a Ipad, i was unable to connect. I saw nothing in the ASA logs, indicating the Ipad didnt even try to connect.
The Ipad generated the following error message:
VPN Connection
A configuration error occured
OK Button
After searching for quite some time, i found this somewhat obscure reference to the bug:
http://blogs.oreilly.com/iphone/2008/07/strong-passwords-can-hurt.html
Special thx to this guy!
So i started to test special characters to see what would work, adding in 1 character at a time. Here is where I stopped:
pre-shared-key !@#$%^&*()_-+=;:'<>,.
These characters worked in the PSK. If you are curious, and want to play, have fun. I assume the alphnumerics will work since those are pretty standard.
As a side note, here are a few more interesting items:
1) The " (quote mark) does work when you run the real cisco vpn client. This was successful on a Windows 7 laptop with 5.X VPN Client.
2) The ? (question mark) doesnt work as well, but that is a little easier to figure out because when you configure it on the ASA, context-sensitive help kicks in and knocks you off the config line.
3) Iphone I4S suffers from the same issue - doesnt like quotes.
4) Android is probably not affected by this bug, but I tested on an open source TUN driver- enabled adroid - not the bionic.
Hope that saves someone some time, sometime!
W

Thanks for the tip.
Help stamp out special characters in passwords. Their "strength" is a myth!
Explained nicely here: http://xkcd.com/936/

Show clear text pre shared key asa 5500.....

I have read several of the posts on how to show your pre shared keys in clear text. I am in the process of converting a 5520 over to a 5525-x and I got to the point where I need the pre-shared keys
the more system:running-config command does NOT show the clear text of the keys nor does access the file via https:// either.
the 5520 is running Software Version 8.4(2)18
any thoughts how I can wrestle this info out of the asa as I'm not getting anywhere with what seems to have worked for a few others.
Thank in advance
Sincerely
Paul

The command more system:run should show you those keys.
Couple things that I have seen
I have seen it where someone configured pre-shared key by cutting and pasting the key as it is shown when you do a show run, so it was entered as ****. You can check this buy entering a dummy config with a key and then run the more system:run and see if it shows up.
also check the privilege level of your login and make sure it is 15.
Mike

Wlan Pre-shared key

I have an n97 mini and I'm trying to get access to a wireless open network ( there is no padlock next to the strenght signal) but it is showing 'enter wlan pre-shared key' but if its open why should I enter a password. Help please

You could try setting up your access point as follows.
Goto Settings>Connectivity>Settings>Destinations>Add new access point. If it still does not store your passphrase, select the access point you have just set up then goto WLAN security settings>Pre-shared key and enter it here manually.

"Bad Pre-Shared Key at station ........"

Hey everyone, Today I tried to connect a dell laptop (inspiron 5000e) to my wireless network, via a Netgear wireless card. I am able to connect to the network, but I am unable to load a webpage. When I go into my airport utility on my mac and look at the error log for the base station the message is "Bad Pre-Shared Key at station ........ " Does this mean anything?

Are you using WPA2? If you are try getting this Microsoft update: http://www.microsoft.com/downloads/details.aspx?familyid=662BB74D-E7C1-48D6-95EE -1459234F4483&displaylang=en

ASA Pre shared key

I am currently using an ASA 5550 version 8.2 anwith ASDM version 6.2.
I have a ASA 5505 in remote area and cannot connect via VPN.
My logs say maybe mismatched pre-shared key.
On my 5550, via the ASDM I used the command more system:running-config and it will not show my pre shared key in plain text, only shows a *.
Any help would be appreciated.

Remote asa:
interface Vlan1
nameif inside
security-level 100
ip address 10.200.1.209 255.255.255.240
interface Vlan2
nameif outside
security-level 0
ip address 172.25.62.226 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
access-list nonat extended permit ip 10.200.1.208 255.255.255.240 10.199.1.0 255                                                                                                 .255.255.0
access-list nonat extended permit ip 10.200.1.208 255.255.255.240 10.10.144.0 25                                                                                                 5.255.252.0
access-list VPNL2L extended permit ip 10.200.1.208 255.255.255.240 10.199.1.0 25                                                                                                 5.255.255.0
access-list VPNL2L extended permit ip 10.200.1.208 255.255.255.240 10.10.144.0 2                                                                                                 55.255.252.0
access-list 100 extended permit tcp host 89.254.12.35 host 10.200.1.213 eq www
pager lines 24
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 172.25.62.225 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set mytrans esp-des esp-md5-hmac
crypto map mymap 10 match address VPNL2L
crypto map mymap 10 set peer 65.181.59.210
crypto map mymap 10 set transform-set mytrans
crypto map mymap 10 set security-association lifetime seconds 3600
crypto map mymap interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto isakmp nat-traversal 21
telnet timeout 5
ssh 10.199.1.0 255.255.255.0 inside
ssh 10.10.144.0 255.255.252.0 inside
ssh timeout 5
console timeout 0
tunnel-group 65.181.59.210 type ipsec-l2l
tunnel-group 65.181.59.210 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:65a0d93601b90ccc07830cddd673e13c
: end
Local ASA:
ASA Version 8.2(1)
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 65.181.59.210 255.255.255.240
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.199.1.2 255.255.255.0
interface GigabitEthernet0/2
nameif insideNOV
security-level 100
ip address 10.10.144.47 255.255.252.0
interface GigabitEthernet0/3
shutdown
no nameif
security-level 100
no ip address
interface Management0/0
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
interface GigabitEthernet1/0
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet1/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet1/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet1/3
shutdown
no nameif
no security-level
no ip address
ftp mode passive
clock timezone MST -7
clock summer-time MDT recurring
dns server-group DefaultDNS
domain-name Rignet
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group service WML tcp
description Remote wits data access
port-object range 1 65535
access-list aclin extended permit object-group DM_INLINE_PROTOCOL_9 any host 65.181.59.219
access-list aclin extended permit object-group DM_INLINE_SERVICE_3 any host 65.181.59.216
access-list aclin extended permit object-group DM_INLINE_PROTOCOL_6 any host 65.181.59.220
access-list aclin extended permit object-group DM_INLINE_PROTOCOL_5 host 10.199.1.2 host 65.181.59.210
access-list aclin extended permit object-group DM_INLINE_SERVICE_1 any host 65.181.59.222
access-list no-nat remark Local Rules
access-list no-nat extended permit ip Rignet 255.255.255.0 10.10.144.0 255.255.252.0
access-list no-nat remark Local Rules
access-list no-nat extended permit ip 10.10.144.0 255.255.252.0 10.200.1.80 255.255.255.240
access-list no-nat extended permit ip Rignet 255.255.255.0 ENI 255.255.255.240
access-list no-nat extended permit ip 10.10.144.0 255.255.252.0 ENI 255.255.255.240
access-list no-nat extended permit ip Rignet 255.255.255.0 Norway_Office 255.255.255.240
access-list no-nat extended permit ip 10.10.144.0 255.255.252.0 Norway_Office 255.255.255.240
access-list no-nat extended permit ip Rignet 255.255.255.0 BobbyVPN 255.255.255.0
access-list no-nat extended permit ip 10.10.144.0 255.255.252.0 BobbyVPN 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit tcp any any
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended permit tcp interface inside any
access-list inside_access_in remark Block port 135 for port scanning
access-list inside_access_in extended deny 135 any any
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_4 10.10.144.0 255.255.252.0 Rignet 255.255.255.0
access-list test extended permit icmp any any echo
access-list test extended permit icmp any any echo-reply
access-list InsideNOV_access_in extended permit ip 10.200.0.0 255.255.0.0 10.10.144.0 255.255.252.0
access-list InsideNOV_access_in extended permit object-group DM_INLINE_SERVICE_7 any any
access-list InsideNOV_access_in extended permit object-group DM_INLINE_SERVICE_4 Rignet 255.255.255.0 10.10.144.0 255.255.252.0
access-list InsideNOV_access_in extended permit object-group DM_INLINE_PROTOCOL_12 Norway_Office 255.255.255.240 10.10.144.0 255.255.252.0
access-list InsideNOV_access_in extended permit object-group DM_INLINE_PROTOCOL_8 BobbyVPN 255.255.255.0 10.10.144.0 255.255.252.0
access-list inside_acl extended permit object-group DM_INLINE_SERVICE_8 any any
access-list inside_acl extended permit object-group DM_INLINE_SERVICE_5 10.10.144.0 255.255.252.0 Rignet 255.255.255.0
access-list inside_acl extended permit object-group DM_INLINE_SERVICE_6 Rignet 255.255.255.0 10.10.144.0 255.255.252.0
access-list inside_acl extended permit object-group DM_INLINE_PROTOCOL_10 10.200.0.0 255.255.0.0 Rignet 255.255.255.0
access-list inside_acl extended deny object-group DM_INLINE_PROTOCOL_11 host 192.168.56.1 any
access-list inside_access_in_1 extended permit object-group DM_INLINE_PROTOCOL_1 any any
access-list inside_access_in_1 extended permit object-group DM_INLINE_PROTOCOL_2 10.10.144.0 255.255.252.0 Rignet 255.255.255.0
access-list inside_access_in_1 extended permit ip Rignet 255.255.255.0 Rignet 255.255.255.0
access-list inside_access_in_1 extended permit object-group DM_INLINE_PROTOCOL_7 BobbyVPN 255.255.255.0 Rignet 255.255.255.0
access-list inside_access_in_2 extended permit object-group DM_INLINE_SERVICE_11 Rignet 255.255.255.0 Rignet 255.255.255.0
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
mtu outside 1500
mtu inside 1500
mtu insideNOV 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any insideNOV
icmp permit any echo-reply insideNOV
icmp permit any echo insideNOV
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (inside) 2 65.181.57.51 netmask 255.255.255.255
nat (outside) 1 0.0.0.0 0.0.0.0
nat (inside) 0 access-list no-nat
nat (inside) 1 Rignet 255.255.255.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 65.181.59.222 10.199.1.23 netmask 255.255.255.255
static (inside,outside) 65.181.59.219 10.199.1.27 netmask 255.255.255.255
static (inside,outside) 65.181.59.216 10.199.1.54 netmask 255.255.255.255
static (inside,outside) 65.181.59.220 10.199.1.26 netmask 255.255.255.255
access-group aclin in interface outside
access-group inside_access_in_1 in interface inside
access-group InsideNOV_access_in in interface insideNOV
route outside 0.0.0.0 0.0.0.0 65.181.59.209 1
route inside 153.15.156.217 255.255.255.255 65.181.57.51 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec stop
snmp-server enable traps entity config-change
sysopt connection tcpmss 1100
sysopt noproxyarp inside
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set mySET esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map myDYN-MAP 5 set transform-set mySET
crypto dynamic-map myDYN-MAP 5 set security-association lifetime seconds 28800
crypto dynamic-map myDYN-MAP 5 set security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map myMAP 65000 ipsec-isakmp dynamic myDYN-MAP
crypto map myMAP interface outside
crypto ca trustpoint Intelliserv.rignet.local
enrollment terminal
subject-name CN=Rignet5550
keypair IntelliServ.rignet.local
crl configure
crypto ca trustpoint ASDM_TrustPoint3
crl configure
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
subject-name CN=Rignet5550
password *
crl configure
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto isakmp nat-traversal 21
telnet timeout 5
console timeout 0
management-access inside
no threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
group-policy myGROUP internal
group-policy myGROUP attributes
split-tunnel-policy tunnelspecified
nem enable
username GaileyB password 0oaTL6AGb4l6JKde encrypted privilege 15
username rignetadmin password 3R8hQCl0jw5iU/r3 encrypted privilege 15
tunnel-group DefaultL2LGroup ipsec-attributes
pre-shared-key *
tunnel-group mytunnel type remote-access
tunnel-group mytunnel general-attributes
default-group-policy myGROUP
tunnel-group mytunnel ipsec-attributes
pre-shared-key *
tunnel-group 164.85.0.18 type ipsec-l2l
tunnel-group 164.85.0.18 ipsec-attributes
peer-id-validate cert
chain
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
class class-default
service-policy global_policy global
prompt hostname context
Cryptochecksum:a84cff45794fa5021237d51d5f87461e
: end

Pre-programmed keys

Similar Messages

Maybe you are looking for