Pre-programmed Speed Dial

Does anyone know how to delete the pre-prgrammed speed dial entries in the Tour. That would be speed dial letters A, Q and W?

Check this thread
http://supportforums.blackberry.com/rim/board/message?board.id=9630&message.id=2118&query.id=2333197...
Here is the summary
Press Green Call Send button
Press BBerry Menu Key
Go to View Speed Dial List
Press the letter entry you want to change (A, Q, or W )
Press the Enter button
You'll now be able to select a new contact for that location from the contact list that comes up.

Similar Messages

Problem with speed dial

Hello,
Just picked up my iPhone 5 and noticed an existing speed dial from my favorites is not working properly.
My speed dial contains a 10 digit phone number, a 10 digit access code, and a 5 digit password all separated by commas. When activated from my favorites the phone number dials perfectly but the 10 digit access code, and a 5 digit password dials very slowly and my system does not recognize the entries.
I deleted the favorite from my contacts and re entered it with the same result. Even re installed ios 6 but no help.
This feature worked perfectly on my iphone 4.
Any ideas your help would be greatly appreciated.

All,
Just went to a Verizon store and conducted a test. I used an iPhone 4S and a iPhone 5 both running ios 6. The 4s dialed a programmed speed dial containing an access phone number, a access number and a password. It worked flawlessly. Ran the same series of numbers on the iPhone 5 (not mine) and it failed miserably.
I hope that apple can provide a fix for us speed dialers. It's quite annoying.
Thanks

When I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

In the past, when I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

I had that too. On the bottom right of the AVG search page is a link which leads you to where you can switch it off. This restores normal Speed Dial operation.
This hijacking has really cheesed me off. I've just downloaded Avast and am going to put it on in place of AVG.

Speed dial programs on SPA-932

On the SPA-932 (attached to an SPA-962), is there any guide to configuring the keys to perform a speed dial with a delay?
I am trying to set a key to perform a transfer which requires dialing # and then a number. It is going to park a call so the extension is pre-known, but when I tried setting the key to fnc=sd;sub=#700@pbx-ip-here it never performed the transfer. It appears the digits are transmitted to rapidly that the 700 happens before the transfer process initiates so it never transfers.
Is there a way anyone else has done something like this or has been able to get this to work? This is an Asterisk PBX for what its worth.
Thanks!

Yup, I had posted and then after it didn't show up for a few hours I had posted again thinking maybe I had just done something wrong or mis-clicked. Then realized it was in moderation queue.

How do I delete a program from speed dial?

How do I delete a program from speed dial?

How do I delete a program from speed dial?

Speed Dial is replaced by another program instead of the program opening in a new tab. How to resolve?

I have been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving Speed Dial available. Recently, every time I click on a Speed Dial button, the new page opens in place of Speed Dial. If I want Speed Dial again, I have to back up page by page or restart Firefox. This has only happened recently and is very annoying. Any help will be appreciated. thanks.
Also finally remembered that instead of clicking on the speed dial icon, I can right click on it and click on "new tab". That way it will come up in a new window. This is not the way it always worked. Wonder why the change?

If you have a mouse with a scroll wheel then you can usually click that button to get a middle click.<br />
If you still have a mouse with only two buttons then you can consider to buy a new mouse with a scroll wheel as that makes scrolling a lot easier and also make use of Firefox features regarding a middle click.<br />
Most mouse drivers also allow to emulate such a middle click by pressing both mouse buttons at the same time.

How do I program pauses and/or waits in speed dials

I am using Cisco IP Communicator 8.6.1.0 softphone. I have entered speed dials and I am looking for how to enter a pause or wait so that it can dial the conference phone number and then enter the conference code. The popup says I can only enter numbers (0-9), plus ( + ), asterisk (*), or pound (#). If I enter a plus, the phone gives me a busy signal when dialing. I cannot enter a comma (,) which is common elsewhere.
I've asked my company's Help Desk and they don't know. Cisco Support says to talk to my company's Help Desk. I can't find mention of "pause" in the documentation I've been able to find.

Try writing a rule, Mail Preferences, Rules tab, click add rule.
If "any" of the following conditions are met:
Next drop down select "Message is Junk Mail"
Perform the following actions:
Next drop down select "Move Message" to mailbox "Trash" or "Delete Message"

Two things came with my Firefox when I downloaded it. Speed Dial and Xmarks. When I start the program it locks up and I have to just shut it down. How can I delete them? I only want the Firefox.

When I downloaded Firefox I had two things download with it. Speed Dial and Xmarks. I don't know about either and don't want them. I cannot delete them alone it seems. When it all loads it locks my computer up totally. I cannot x out of anything. Just kind of "thunks" with a dead sound. My facebook applications runs better on Firefox but I can't seem to get it downloaded alone. What am I doing wrong? I do not want the speed dial for sure. Don't know about the Xmarks.

Where did you download Firefox from?
The official Firefox download doesn't come with either of those addons.
http://www.mozilla.com/en-US/firefox/
or
http://www.mozilla.com/en-US/firefox/all.html

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

BUG: Speed Dials not functioning correctly when Option button is last used

There is a bug in WebOS where Speed Dials do not work correctly. Holding down your speed dial favorites button will not place the call. This happens when the option key is used in launcher or card view before attempting speed dial.
For instance if your last character of a search you did 4 hours ago on your phone contained a series of numbers and you locked the option key to do so, (or even if you accidently hit the option key last and then did not need it) then an attempt to use speed dial "G" will not work, as your Pre/Pixi thinks you are holding down the "6" key and not the "G" key.
This needs to be remedied (for instance have the option key press clear out or unlocked as soon as the search is performed or cleared off of the phone) because there is no way to tell what state the option key is in before using a speed dial (not that I want to check and fiddle with it anyway).

The Z and B keys are the * and # keys. That is why they are not in the speed dial list. Hmmm... while it might be a "bug" at this time your the only person having this issue as far as I can tell. Since the issue moved to another phone it could be that its related to your Palm Profile. I unfortunately cannot replicate this issue but would like to test something. Can you do a Partial erase on your device and create a new Palm profile? This will see if the issue is still on the device.
If it is not then the issue is within your Palm Profile. If that is the case I can help you from there. Please post back when you tried this step.

Pre-programmed voice mail key

I am trying to modify the pre-programmed voice mail number in my bionic (*86) to include pauses and waits separating various prompt numbers, etc. I found under voicemail settings where you can perform this mod and it accepts and displays the changes made, but when the green "voicemail" touched on the home page, only *86 is prompted and none of the modified prompts appear......I have managed it to make it work by creating a new 'contact", naming it "voice mail", then creating a separate quick dial on the home page, but utilizing this method and not the pre-installed green prompt will not allow user to see the number of voice mails waiting like the green dedicated prompt displays.
Surely there is a way to go in and modify the default number of the pre-installed voice mail prompt as there surely could be other required numbers besides *86 customarily used by Verizon???

Usually you can go to Settings>Call Settings>Voicemail Settings and change it there..

Contacts and Speed Dial issue

This evening I went to call someone on my Pre Plus and my contacts were gone. Rebooted, they came back. Tried the speed dial again and it does not work. The contacts DO have the speed dials assigned. They worked yesterday....Anyone know what the problem is? I can't find anything here about it!

Hello and welcome to the forums;
Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
Hope this helps,
TreoAide

Touch Tones via speed dial work now

The 3G iPhone (or the 2.0 software) seems to have fixed the issue where you could not program your speed dial to automatically enter your mailbox number and password on your voicemail system (I use AUDIX at work). With the original iPhone, the tones were too long to be recognized and I had to type the numbers in manually each time.
Yes!

Huh, we have Audix too, and I have had mine working automatically since I got the first iPhone a year ago... I just had to play with how long of a pause to make before starting with the tones. It has always worked with Vonage as well...

SPEED DIAL and OPENING Firefox

Why is that every time I open Firefox I do not have all my SPEED DIAL sites that I created? Also, Firefox will not open when I click on it to open; it just flashes the page like it is trying to open, I have to disconnect from the network provider and then Firefox opens. What is going on with this new Firefox? I want to downgrade to the previous version; no problems with that version.

Regarding your Speed Dial list, I'm guessing that was created using an add-on. Can you check to see whether it was disabled because it wasn't compatible with Firefox 4:
Tools > Add-ons > Extensions
If there's no update and you can't live without it, sure, you can reinstall 3.6.16. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4, and uninstall it. Do not remove your personal data and settings, just the program.
Then finally you can reinstall Firefox 3.6. Unless you have installed an incompatible add-on, it should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this downgrade myself!

Speed dial urgent help

the story so far...
so far so good after my first week of owning a Q10.
updated software and only problem was that it duplicated all my contact entrys so had to manually delete over 260 entries.
the urgent advice i need now is about setting speed dials.
i go to phone page > pull down from top screen > settings > keypress speed dial > set as 9/c security - 8/x fire or
2 /e cardiac arrest
as you can guess i work in a hospital. the problem is when i press the fast key for any that ive programmed in it brings up a page for:
call a contact
text a contact
applications - bbm / calculator / callender / camera
so its thinking i want something in C and not the speed dial.
any ideas as this is quite important especially if we have a crash call/cardiac arrest and i have to faff about dialing the emergency number.
thanks in advance
Solved!
Go to Solution.

3rd time lucky.
now this is strange.
ive just joined 3 other forums including vodafone to see if anyone else has any ideas.
15 minutes ago it was still doing the same thing and taking me to a menu screen.
i download a screen capture app so i can post exactly what its doing and guess what... its working.
i press one of the storred fast dial numbers to get a screen shot and it dials the number.
only thing i could put this down too is a glitch in the software and loading a new program has kicked its **bleep** into gear.
so i can thankfully say.... case closed.

Pre-programmed Speed Dial

Similar Messages

Maybe you are looking for