Pre-recorded message then hangup

Hello,
I am looking at one of our numbers and would like to have the ability to set a recorded message to play when the number is called. Then at the end of the recorded message to hand up.
Is there a way to do this from Call Manager 7? Or will I have to push it through to UCCX7?
Thanks
Trevor.

If you just need a message to be played then you could potentially do this via voicemail as well.  If you have Unity or Unity Connection, you could configure a call handler (does not require a license) or mailbox for the DN and call forward all to VM.  Record the appropriate greeting and set the after greeting action to hang up.  When you do this, the call will be forwarded to VM where the greeting is played and then Unity/Unity Connection will immediately disconnect after the greeting.
You won't be able to do this natively with CUCM.  IMO, this option is probably the easiest.
Hailey
Please rate helpful posts!

Similar Messages

  • How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

    How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

    There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

  • Play pre-recorded message

    Hello,
    I'm trying to set up a number such that when a caller calls the number, a pre-recorded message gets played.  The caller will not be able to leave a message/voicemail on this number though.  Here are the steps:
    1. Caller dials number
    2. Caller listens to pre-recorded message
    3. Caller hangs up the phone
    Is the above doable with Skype?  If so, how?
    Thanks!

    You can try the PrettyMay Call Center for Skype which can do what you want, learn more at:
    http://www.prettymay.net
    Want to record Skype calls, check out at:
    hereandhere

  • How do I route an extension to a recorded message, then hang up?

    Here's an easy one for somebody...
    I rec'd a request to setup an extension that calls can be transferred to internally that does the following:
    The caller will hear a prerecorded product information message. then the system should hang up.
    There's no requirement for a voicemail box or a physical phone.
    Would anyone be able to provide detailed instructions or refer me to a website that has the procedure?
    Thanks in advance for the help...    BTW, we're running Unified Call Mgr version 6.1.2.1113-2

    Hi -
    If you have Unity or Unity Connection it is really easy.  Assuming you have one or the other:
    1.  In CUCM on the directory number config forward all calls to voicemail.  Include the voicemail profile on the DN config.
    2.  Create a call handler with the same extension as the extension number that is forwarding to voicemail.
    3.  Set the schedule to All Hours.
    4.  Record a greeting you want callers to hear.
    5.  Set the After Message action to Hang Up.  The default is to take a message.
    6.  Test and you should be OK.
    Hope this helps!  Ginger

  • CUCM & UCCX Outbound pre-recorded message

    Hello,
    I have a customer that records all the calls that enters and exits some extensions in CUCM.
    By legal request, and since he has a UCCX when a call arrives to those extensions I managed to route the call to UCCX, play a message like "your call will be recorded" and then forwarded to the extension.
    Now the problem is that the customer also wants to do this automaticaly on outbound calls, i.e, extension 1111 calls outside number 222222222, he wants that 222222222 when answers listens the message "your call will be recorded" and then when the message ends, the call will be estabilished between 1111 and 222222222.
    Is it possible to do that with the equipment that the customer have?
    CUCM: 8.6.2.200000-2
    UCCX: 8.5.1.11003-32
    Thanks in advance...

    Awesome Anthoney, thank you very much. I was about to reply after having some issues, though I managed to get it working and the Trigger Application step mixed with two seperate scripts\applications (a triggering script with this step and a script with the actual outbound steps) did the trick.
    Thanks again

  • Options for pre-recorded voice paging

    What options are there for pre-recorded voice paging on Cisco Phone Systems.
    We are running Cisco Unity Express 3.1 on a Cisco 2851 and I have a ATA186 that connects to a PA System that has an extension assigned to it.
    So what I would like to do is select between 2 or three pre-recorded messages and play it over that extension.
    I know Informacast will do it but that is a little expensive in my opinion for what I want to do.

    Take a look at SynApps SA-Announce and Broadcast Manager: http://syn-apps.com
    Both are great products, compatible with CME, and are typically cheaper than other options.

  • Is there a way to pre-record the timing of the slides and effects in a keynote presentation, so that you can present it without having to press anything?

    Hi! It would be great if someone could tell me how to pre-record timings in a keynote presentation, so that when presented, it plays by itself, based on the pre-set recordings. I know there is a way to do it by going to      Inspector>Document> Audio> Record          However when you do this, your computer also records the sounds it picks up with the microphone, which can greatly affect the sound. I have Keynote '09. Thanks in advance!
                                                                                                                                                                                                    -AppleMe123

    Open the Settings app > Notifications > Messages. Scroll down adn turn OFF "View In Lock Screen". You may want to consider setting Alert style to none, but this will not impact what happens when the screen is locked.

  • How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?

    How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?i dont want a custom one with my voice i want the pre-recorded where a lady says my number . how do i get that?

    Voicemail is a cell phone carrier function.  Contact your carrier to see if they have this option.  If not, i'm sure you can download a sound file from the internet with a greeting and add your name.  Then play it back on you PC while holding your iPhone near the speaker when recording the greeting to voicemail.

  • HT1567 My lap top is not recognising my pre recorded cd and will not burn a cd. Help

    Help! My lap top is not recognising a pre recorded cd in itunes and it wont burn a cd. Anyone know why?

    Try (copy & paste):
    drutil eject -drive internal
    then insert a disc.
    If that doesn't do the trick, Zap the PRAM and Reset the SMC, and try again.

  • From where to listen the recorded messages?

    Hi,
    We have a network which consists of CUCM, UCCX, AQM, CUC. During after hours, if someone calls, the IVR will ask to press * to record a message. But from where shall we listen to these recorded messages?
    Thanks in advance

    That wouldn't be enough information to answer your question.
    Are you an administrator of the phone system or a supervisor?
    All of those products are capable of recording a phone call, but since you mentioned the IVR, it's like narrowed down to UCCX and/or AQM.
    UCCX is playing the IVR for sure, and cannot record the call in the IVR, only once it lands on the Agent, which really just leaves AQM.  But I'm guessing here, based on limited information.
    If you also agree that it's AQM that is doing the recordings, which I'm not even positive it can record a call at the IVR level, then you would need to access the web interface for AQM to listen to the recordings.
    If you post your IVR script from UCCX, we could see what is happening after the user presses *.  Such as sending an HTTP POST to AQM or the like.

  • FaceTime to call a Pre-recorded Video?

    I don't know if this is the right place. I would like to create "something" where a user could dial an actual number via FaceTime and reach a pre-recorded video viewable through FaceTime. For example, lets say I want a person to call 555-1234 via FaceTime and what they will get a video playing a movie trailer.
    Anyone know how I can figure this out?

    sorry, no answer... I'd just like to build on this if you don't mind.
    How about including a FaceTime voicemail feature too. They call you, you're away and instead of an impersonal message, be able to SEE your FaceTime voicemail message?

  • Need help recording Video over pre-recorded Audio

    I'm making a music video, the audio has already been recorded, but I am having such a hard time trying to figure out how to record the video over it. I need to be able to hear the audio track while recording so I can sync it properly, but whenever I click on the 'Open Camera Import Window' button, it doesn't allow you to playback the audio. What is the easiest way I can go about this?
    PS. If my question is vague or unclear, I'm sorry. Every person I have asked said they had no clue what I was asking.

    Hi Rick,
    Thank you for your response.....I have always done this process using other software for the videos....so the process here is different for me.
    I pre record the audio first, then edit to remove all of the terrible sounds...breathing, mispoken words, etc...clean up the audio, then add a background music track all in Audacity.  Then, I add that track in and record my video over it.  I am creating a tutorial for a software company on how to use their software.
    This may seem backward.  My question now, I am in Captivate 7, I press video demo and it goes straight to recording the  video before I have a chance to import the audio track.  I need the audio track so I can get the video to follow the audio...if that makes sense.
    Cheers...Robert

  • Won't Add Pre-recorded CD to Source List

    ITunes 5 or 6 will not add a pre-recorded CD to the Source List. It flashes the CDDB window up for a second...then nothing. The OS labels it "Audio CD" on the desktop.
    I have re-installed the OS and iTunes and blown the prefs...same result.

    I have the same problem on both my iMac G5 (Home Machine) and my PowerBook G4 (Work Machine). As a classroom music teacher, we are constantly making new compilation CD's (all okay under Australian Copyright Laws) for our classes and sharing these CD's between the music staff. As I have found out, if iTunes (v. 4.9 & v.5.0) cannot obtain a match from CDDB, the Audio CD will only show up on the desktop and not in the iTunes Source List.
    A work around is to disconnect from your internet source. For me, it is a normal disconnect from the internet, ensuring that there are no "connect when needed" preferences turned on. At work, I manually disconnect the ethernet cord from the back of the PowerBook. Whenever I have done this, the pre-burnt CD appears in the iTunes Source List.
    If you do not want to disconnect from the internet, then you will need to go to "File -> Add to library... ->" then choose the Audio CD from the Desktop. This has worked for me also, but it does mean adding the track names and then converting to AAC or MP3.
    Hope this is of some help.
    Rodger

  • My iphone5 stopped receiving calls and text messages then a message said my sim is locked what can I do?

    My iphone5 stopped receiving calls and text messages then a message said my sim is locked what can I do?

    You can call you're carrier and have them unlock it.

  • HI, I just got a Macbook Pro.  It's great but my mail doesn't work at all.  It will come up correctly, but take forever to download messages,  then won't delete them,  then won't save them to folders.  Then when I go to quit mail it's like it gets stuck.

    HI, I just got a Macbook Pro.  It's great but my mail doesn't work at all.  It will come up correctly, but take forever to download messages,  then won't delete them,  then won't save them to folders.  Then when I go to quit mail it's like it gets stuck between quitting and not.  I have to force quit, then restart my computer if I want to pull up my mail again.  How can I fix this?

    If you just got your new MBP you have phone support from Apple (which is quite good) call them.  800-692-7753 tell the automated answerer "mail technical support" you'll have human quite quickly.  Hope this helps.

Maybe you are looking for

  • Best approach for select lists to hold more than 3000 values urgent plz

    Hello, I have an interactive report in which I have made one of the column as a editable dropdown list item using the APEX API ITEM APEX_ITEM.SELECT_LIST_FROM_QUERY_XL, I am getting an error saying that ORA-06502: PL/SQL: numeric or value error: char

  • JSF 1.0 HTML problem

    I updated my JSF version to the beta version 1, and I get a problem that was not present in the previous version: I generate HTML processing xml data, and put the data in a bean, when I output the variable I only get text and the browser does not for

  • CSS - add service x.x.x.x weight command

    Hi, From the Cisco pages I read the following "The CSS uses the weight for a service when you configure weighted roundrobin load balancing on the content rule. When you assign a higher weight to the service, the CSS redirects more requests to the ser

  • Some Photo thumbnails are black, selecting them crashes app

    Scattered throughout my Photos are dozens of photos with black thumbnails. When I select any of these, the image appears full screen but with the arrow overlay indicating that it's a video (which they aren't). One second later, the Photos app crashes

  • I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

    I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..