Pre req for 11.5.9
Hi All,
Any kindly provide me the exact metalink id for pre req for 11.5.9 application in windows server
Thanks,
Rajesh P
Oracle Applications 11.5.9 Installation Update Notes for MS Windows - B10848-01 [ID 234782.1]
11.5.9 Installing Oracle Applications
http://docs.oracle.com/cd/B12190_11/current/acrobat/r1159ins.pdf
May I know what's the reason...IMPORTANT REMINDER: 11.5.9 Severity 1 Production Error Correction Support Ends June 30, 2011 [ID 1331433.1]
Lifetime Support Policy: Oracle Applications
http://www.oracle.com/us/support/library/lifetime-support-applications-069216.pdf
Thanks,
Hussein
Similar Messages
-
Technical Pre-reqs for running PPDS heuristics
Folks -
Can somebody please let me know if we have to go through some technical setup for PPDS heuristics (standard lot heuristics or campaigh heuristics)to run?
For example, to be able to run CTM, we need to set up the CTM server or for SNP or PPDS optimizer, we need to set up the optimization server..
DO PPDS heuristics need any such setup?
Appreciate your help.
Thanks
VarunNo - there is nothing special to be setup at the Hardware or Server level for running PPDS Heuristics.
PPDS Heuristics run on Master Data - Product Master and Source of Supply (PPM/PDS and Resources for In-house produced items and Transportation Lanes for externally procured items).
CTM uses Optimiser Engine hence separate setup is required.
Somnath -
Clustering Pre-reqs for sql 2012 always on availability group
Hello,
I'm currently in the planning stages of building a sql 2012 alwaysON cluster on Windows server 2012. I'm a bit confused with some of the requirements.
Does windows 2012 clustering require a heartbeat network as well a nic that communicates with the domain?
For a 2 node 2012 always on sql cluster which type of cluster should I use? node majority? node majority plus fileshare?
thanks!I found this information regarding SQL 2014. This could be helpful
"We strongly recommend that you use the same network links for communications between WSFC cluster members and communications
between availability replicas. Using separate network links can cause unexpected behaviors if some of links fail (even intermittently).
For example, for an availability group to support automatic failover, the secondary replica that is the automatic-failover partner must be in the SYNCHRONIZED state. If the network link to this secondary replica fails (even intermittently), the replica enters
the UNSYNCHRONIZED state and cannot begin to resynchronize until the link is restored. If the WSFC cluster requests an automatic failover while the secondary replica is unsynchronized, automatic failover will not occur."
source:http://msdn.microsoft.com/en-us/library/ff878487.aspx#NetworkConnect -
Is Oracle server installation a pre-req for installing IFS 1.1 on NT?
I have Oracle 8.1.7 server installed on a
solaris box. I want to install IFS 1.1 on
my NT. I did a Oracle 8.1.7 client install
and proceded with the iFS 1.1 installation.
Looks like iFS 1.1 installer on NT needs
Oracle HTTPD server to be running. This
HTTPD server seems to be packaged only
with the Oracle server installer and not
the client installer.
nullYou're right. But you don't have to install the whole Oracle server on the machine where you want to install iFS. Just start the server installation, go to a custom install, and deselect everything except the Oracle HTTP Server component. That's all iFS needs on the middle tier machine (where you installed the Oracle client).
-
MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST doesn't have R12.HR_PF.B.1
Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DB839396 wrote:
Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DBHi,
yes, you are right. this is because R12.1.1 comes with the installation. And you can not apply any pre-req before installing R12.1.1
All the patches listed in the table for pre-req are for the RUP patches which you will apply later. For example before applying RUP3 for HR you will apply 12757980 as a pre-req for Singapore.
Thanks -
Problems installing AIA 2.5 Foundation Pack pre-reqs on SOA 10g
I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
==================================================
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
==========================
So, the Opatch is with the latest version. Then I ran:
=============================
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\oracle\soasuite\oui
OUI shared library : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
=====================
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*Hi Walter:
how r u?
Basically the issue is related when u apply patch 6640838 to upgrade OUI. If u don't do the following, u get into the error u described in ur post:
1. Before u install patch #6640838 , u need to be sure to rename the OPatch directory under $ORACLE_HOME. Once u do that, u can proceed with the application of patch 6640838.
2. Then after applying it u can download patch 6880880, in order to have the latest OPatch version (1.0.0.0.63). In this step, u just need to unzip it, and u will have a new OPatch directory under $ORACLE_HOME
3. After that, u can go and do an "opatch apply" for patches 8533397 and 8644645.
And that's it, u will get rid of that messy problem.
I ran into the same issue, but just realized the step that was causing all the problem.
Hope this helps.
best
rolando -
Problems installing AIA 2.5 Foundation Pack pre-reqs
I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
+==================================================+
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
+==========================+
So, the Opatch is with the latest version. Then I ran:
+=============================+
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\oracle\soasuite\oui
OUI shared library : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
+=====================+
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*Use higher versions of OUI Installer and OPatch - 10.2 or above
-
Hi,
Is SOA 11g installation Pre-req for OSB 11g on top of Weblogic 10.3.3. As per OSB 10gR3 we could install OSB with out SOA installation on Weblogic 10gR3.
Thanks,
NLHi
the soa installation isn't a prereq for the osb installation
at minimum you just need the wls installation. -
Warning while running pre-req checks for installing 11g binaries
I am trying to install 11g binaries on my box for upgrading my production db from 10.2.0.4 to 11.1.0.7. I have dev and Prod running from the same box. I already upgraded my dev instance to 11g and its home is /opt/oracle/product/11.10/dev.
I created another path for production as /opt/oracle/product/11.1.0/prod so that I can install the 11g binaries for production in there. When I run the installer, the pre-req checks gives me two warnings -
Checking PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that the PATH environment variable includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
========================================================
Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that environment variable LD_LIBRARY_PATH includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
I ran ther pre-req again after unsetting the PATH and HOME variable. But it still gives me a warning on the PATH variable. What should I do to avoid this warning?If I were you, I would have defined the HOMEs as "/opt/oracle/product/dev/11.1.0" and "/opt/oracle/product/prod/11.1.0" - that would eliminate the errors you are facing. It is still not too late - you can install the prod binaries as "/opt/oracle/product/prod/11.1.0", then later on "clone" the OH from "/opt/oracle/product/11.1.0/dev" to "/opt/oracle/product/dev/11.1.0" and delete the former.
You could also simply clone "/opt/oracle/product/prod/11.1.0" from "/opt/oracle/product/11.1.0/dev" rather than running the the install/patching process all over again.
HTH
Srini -
Hi,
I am working on j2EE technologies for past 2 years and planning to move to SAP MDM. Will it be easy to move to MDM(i understand there will be a learning curve, but still!) or do I need to fulfill any pre req's to learn it. If so, what will be those?Hi,
if you are planning to become a MDM technical Consultant, then your experience in J2EE will prove very helpful. you can easily explore and develop using Java API and web services.
If you have little bit of ABAP, XI and Enterprise Portal, that would be plus point. but it is not mandatory, you can learn MDM without having good knowledge of these.
Regards,
Shiv -
JAEHYLEE (R11i AOL) Adpatch fails with Pre-req check
Goal
이미 적용한 patch를 Adpatch가 다시또 Pre-req로 재차 확인을 요청하는 경우가 발생할 경우
Cause
adpatch는 AD_SNAPSHOT_BUGFIXES table의 bugfix_id에 record를 가지고 있어여 하나 여기에 데이타가 없는 경우에 prereq check를 잘못할수 있다
fix:
adadmin을 사용하여 Maintain snapshot information을 수행을 권고 드립니다.
Perform the steps :
adadmin : Maintain Applications Files --> Maintain snapshot information
--> Manage Snapshots within this Application System.
You must run AD Administration "Maintain snapshot information" once
for each APPL_TOP before you can apply any patch that contains a "
compatible feature prereq" line on that APPL_TOP. Running AD
Administration "Maintain snapshot information" for an APPL_TOP
completely populates the APPL_TOP's current view snapshot. This complete
information is required for the automatic prerequisite patch checking feature
to give correct results.
Reference
245362.1Hi,
Please run the following command to check the Exchange server in your organization:
Get-ExchangeServer
Check whether there is any legacy Exchange server listed. We can double confirm the Excahnge server in the following path:
1. In ADSI Edit, navigate to Configuration >
CN=Configuration,CN=<domain> > CN=Services >
CN=Microsoft Exchange > CN=<Exchange organization name> >
CN=Address Lists Container > CN=Recipient Update Services.
2. In the result pane, right-click Recipient Update Service (Enterprise Configuration), click
Delete, and then click Yes to confirm the deletion.
3. Uninstall Exchange 2003 by using Add or Remove Programs from
Control Panel.
If there is no Exchange 2003 in your organization, please collect any error logs in Event Viewer for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
What are the pre reqs to learn XI
Hi..
Can any one suggest me what all the pre req's that i need to learn so that i can learn XI. I am new to this field, so can any one suggest me how to start?
thank you.
kishore karnatiKishore
If you know basic concepts of Java, ABAP and XML it would be a added advantage to learn and understand XI very quickly.
As you may XI is SAP's middleware solution, providing integration capabilities for SAP and non-SAP solutions alike. It is becoming increasingly important in any SAP implementation, mostly because it makes integration to SAP systems easy to implement. Also, SAP's newer solutions like SRM and MDM use XI's capabilities natively.
SO if you are interested in working with XI, that is agood thing. It is quite different from EP though, because EP is very user and front-end oriented, whereas a good XI implementation is invisible to the end-users.
An certification is a good thing to have, and XI is no different. But as in any other SAP solution, the certification is no substitute for hands-on experience on XI... which is what you must get as soon as you can.
new sap xi
NEW TO xi
When you have xi system practice this simple scenarios for starters:
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
---Satish -
Hello,
I am attempting to deploy IE10 and its pre-reqs but don't appear to be able to get the client to evaluate that it needs it. On the client in the UpdatesDeployment.log I can see that the update is processed, but doesn't do anything else.
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_87e13ecb-c669-43be-9e2a-01e567285031", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l
Update (Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_87e13ecb-c669-43be-9e2a-01e567285031) added to the targeted list of deployment ({0D676272-8326-4E44-9BC9-AED88E69C953})
I also see the following:
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 3/31/2014 10:41:02 AM 4516 (0x11A4)
Assignment {4dedb6be-289a-4f3a-9142-219c5bc9b3dd} has total CI = 2 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3504 (0x0DB0)
Also have some errors after a "Raising client SDK event"
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_f2638b04-e9b6-442e-8cf0-59b3635e2eef", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_5fe2b519-6b09-4f46-aaf2-3cb3f254bea7", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3504 (0x0DB0)
GetUpdate - failed to get targeted update, error = 0x87d00215. UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
GetUpdate failed, error 87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
CCCMUpdatesDeployment::GetUpdate failed, error = 0x87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 2680 (0x0A78)
GetUpdate - failed to get targeted update, error = 0x87d00215. UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
GetUpdate failed, error 87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
CCCMUpdatesDeployment::GetUpdate failed, error = 0x87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 2680 (0x0A78)
Unable to evaluate assignment {4dedb6be-289a-4f3a-9142-219c5bc9b3dd} as it is not activated yet UpdatesDeploymentAgent 3/31/2014 10:53:09 AM 3516 (0x0DBC)
Also in the WindowsUpdate.log I can see that the client is checking the correct site. I am also deploying KBs 2729094, 2670838, 2786081 and 2758857 as pre-reqs, but I cannot get SCCM to recognize 2670838 in the catalog even though it is in the WSUS catalog.
This client is able to retrieve other updates.Hi,
0x87d00215 is "item not found".
I recommend you check the following log files:
LocationServices.log
ContentTransferManager.log
DataTransferServices.log.
For more infomation, please review the link below:
Technical Reference for Log Files in Configuration Manager
http://technet.microsoft.com/en-us/library/hh427342.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Can't purchase a song from an Album that I cancelled the pre-order for?
Ok, so here's the deal, I bought a £15 voucher and made some purchases, the first of which was the pre-order of an Album that was released today (Sunday 24th). I didn't know however, that the cost of the purchase was deducted from your balance once you actually downloaded the album, and I've spent my credit to the point where I'm pennies of being able to pay for the pre-order of the Album. I decided however, to hit cancel pre-order and simply just download the songs that I could afford, then download the wrest at a later date. However, the album that I've cancelled my pre-order for, still displays as 'Purchased'? I was able to download one song for pre-ordering the album, but that was a deduction of 99p, the price of a single song. I'm curious why I cant't purchase the wrest of the album individually, am I tied to the pre-order because I downloaded a song that was advertised as 'Early Access', or do I now have to pay the full cost of the Album because I've surpassed the deadline to cancel the pre-order (if there is such a thing).
Some one please help me
P.S. I've only been using iTunes for less than a week, so I'm pretty much a noob.Delete the problem track from the iTunes library, allowing iTunes to move the track file to the Trash. Then download the track again from the iTunes Store via this procedure:
http://support.apple.com/kb/ht2519
That fixes the problem for many people. If problems with the track persist, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Error : Pre Settings for IDoc inbound processing are missing error
Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]
Maybe you are looking for
-
Hi everyone,now i create a enetity service and i want to create attributes in the entity,but when i browse datatype, package com.sap.core disappears, so i cna not choose datatype?why?thanks
-
OAM/OIM 11.1.1.3 audit question
All, We are collecting login information in the IAU_BASE table. Most of the time IAU_INITIATOR value is null. Does anyone have an idea why this is the case? Is there a setup that we are missing in OAM configuration? thanks in advance, Prasad.
-
Hello, recently I have sleep wake failure' How do I fix this?
Hello, recently I have been getting unexpected restarts, after restarting it tells me 'sleep wake failure' How do I fix this? Yes I`ve done all : new system, disconnection etc. ruhdy
-
How do i transfer movies from ATV 3rd gen to iMac?
how do i transfer movies from ATV 3rd gen to iMac? help!
-
IPad 3G won't connect to iTunes
Unable to set up the iPad -- have used the online assistant and completed all steps for troubleshooting... no luck. Any suggestions?