Pre-requirements to install and run database
Hi,
I need to justify to our parent company production support team that "pre-required software installation list" mentioned in the Installation document of Oracle are software tools and packages required not just for the installation but also for the day-to-day operations to run Oracle Database. Can somebody from Oracle please answer to clear this doubt ?
For example,
We have linux AS 3 (Red hat Linux) and following software packages are listed as pre-requirements. I need an email, reply or document which says all these software packages are also required after installation to run daily operations of Oracle RDBMS ? I appreciate your help.
gcc-3.2.3-2 or greater
make-3.79 or greater
binutils-2.11 or greater
openmotif-2.2.2-16 or greater
setarch-1.3.-1
compat-db-4.0.14.5
compat-gcc-7.3-2.96.122
compat-gcc-c++-7.3-2.96.122
compat-libstdc++-7.3-2.96.122
compat-libstdc++-devel-7.3-2.96.122 or greater
Thanks,
- Sanjay
These packages are required for installation of Oracle SW not for "after installation to run daily operations".
After installation you could uninstall them but note that you will need these packages to apply patches and patchsets.
Don't uninstall openmotif it may be required also for some components of Oracle SW.
Similar Messages
-
User rights required to install and run netmon on windows 7
What are minimal user rights required to install and run Netmon on Windows 7
Senior IT Systems AdministatorYou have to belong to the Netmon Users group.
Thanks,
Paul -
Forms 10g installed and running on Windows Vista
<font color=0000FF>Update 12-Dec-2008: </font>Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
<font color=0000FF>Update 07-July-2008: </font> Added text at the bottom showing how to find patchsets for Forms 10g.
<font color=0000FF>Update 29-May-2008: </font> This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted <font color=0000FF>as blue text.
</font>
<font color=0000FF>Original message begins here:</font>
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. <font color=0000FF>(Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista)</font> So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
<font color=0000FF>Update 29-Jan-2008: </font> Unfortunately, it turns out that the Forms 10g Builder running on Vista <font color=0000FF>had</font> a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
<font color=0000FF>Update 12-Mar-2008: </font> Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
<font color=0000FF>Update 25-July-2008: </font> Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. <font color=0000FF>[ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]</font>
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
attempting to verify your virtual memory settings.
Please verify that the sum of the initial sizes of
the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
#: --Alt+Home works, but leaves the Action (first
#: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"<B>Finding Forms 10g Patchsets</B>
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
Is it possible to install and run RMAN remotely ?
Is it possible to install and run RMAN on a separate remote network-connected platform from the platform of the Oracle DB instance with which RMAN was initially installed without any additional licensing ?
I.e. is it possible to copy the RMAN executable and any required libraries to the remote platform and successfully run RMAN on the remote platform to backup the Oracle DB instance with which RMAN was initially installed without any additional licensing ?
This is using RMAN with a recovery catalogue in the target database control file.
Thanks,
Brett.Hi Kostya,
Depends on what you mean. Default the SOA Suite installs a Oracle Lite database to use for hydration storage. So default there is no real database and therefore you can not install ApEx. But you can configure the SOA Suite to use a "normal" database, and then you can use ApEx.
Regards Pete -
Pre requirement to install PRIMAVERA p6 v7
Hi,
Can anyboby have the pre requirements to install PRIMAVERA p6 v7 on OEL 5 U2 (32 bit) with database 10g Release 2?
what are the steps to be followed before installing primavera?
kindly share if anybody have experience on this...
Regards,
karthick
Edited by: 800196 on Oct 5, 2010 8:37 AMHi
This forum is dedicated to EBS Oracle Projects.
You might want to post your message on a forum dedicated to Primavera product.
Go to Forum Search and look for -
Primavera » Primavera P6 Enterprise Project Portfolio Management
Dina -
Installing and running Arch linux on the new MacBook 2015
So Apple has just started taking orders for the new 2015 MacBook. You know --
the thinnest and lightest MacBook to date (even thinner than the MacBook Air),
with a 12 inch retina display, the Intel Core M processor, a single USB-C port,
and the new force touch trackpad.
I'm pretty sure there are a few people like me who'd like to buy this new
MacBook and then install and run Arch (or some other flavor of linux) on it.
But of course, this MacBook is in many ways very dissimilar to previous MacBook
Pros and MacBook Airs. So this thread is a shout out to likeminded individuals
who are willing to brave the odds and install Linux on this new machine, so we
can help each other figure out (and hopefully fix) the inevitable issues that
will arise when we venture into this uncharted territory!
I have a little bit of experience installing and running Arch on MacBook Pros
and other Apple computers, but I'm (very) far from being an expert. But based
on my limited experience, I think the following areas will pose the biggest
challenges to getting Linux properly up and running on the new MacBook:
1. Installation: it's possible that booting a live USB will fail. So we might
have to use a CD. Indeed, perhaps we may even have to build a special ISO
image for this laptop. And once the install is complete, EFI/EFISTUB booting
with/without refit/refind may or may not work. Also, installing a bootloader
(grub, gummiboot, etc.) for dual booting Mac OS X and Linux may be a
challenge. We might have to endure kernel panics and deal with cryptic error
messages while booting.
2. Wifi may or may not work reliably. We might have to do some tinkering with
different drivers, etc.
3. Battery life may not be very good. We might have to fix a few things here.
4. The HiDPI retina display may or may not work properly with specific window
managers/desktop environments. Fonts/icons might be too tiny, may not scale,
etc.
5. The new Force touch trackpad may not work out of the box. In fact, I'm
fairly sure the regular xf86-input-synaptics package won't play nice with
this trackpad. There may not be support for features like the trackpad's
haptic feedback, multi-finger gestures, pressure sensitivity, etc. Indeed,
this might actually take a while to get properly working under Linux.
6. I don't know if the new USB-C port will work out of the box. It may not
play nice with USB flash drives and other peripherals and there may be
issues with ehci/uhci/whatever.
I tried Googling around trying to learn as much as I could about the issues
above, but since the laptop is going on sale only today and most users are
probably not interested in running Linux on it, I came up quite empty. I think
many others on this forum might also have faced the same issue.
So here's an open invitation. Let's share our experiences trying to get linux
working on this laptop. If you buy this laptop and try to install Arch on
it, please let us know how it went! Even if some things work out of the box, it
might be useful for others to know, so please share.
And of course, if you have more information/gotchas: for example, if you
encountered and managed to fix one or more of the issues above, or you
encountered a problem that's not on the list above, or even if you tried
something and it didn't work out as expected, please post below. I'm sure this
will be a very big help to others trying to solve similar issues on the same
hardware. Thanks!It would probably be beneficial to post the output of lsusb -vvvv and dmesg.
FS1RTG77 wrote:
2. Broadcom BCM4360 AirPort Extreme, not supported.
5. The new Force touch trackpad and keyboard, both SPI bus devices, do not work.
On 2, it may just be a case of needing firmware, my laptop has a BCM43602 card, and the firmware required has only just been added to the linux-firmware package. Prior to that I had to install it manually.
On 5, I'm wondering if you identified them as SPI devices by looking in OS X, I ask because my laptop categorises my keyboard and trackpad in the same way. But they are actually still both connected to the USB bus, and presumably using SPI as an interconnect between the keyboard/trackpad and the microcontroller that tie them together. -
Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====Have you installed AppController on the same machine with VMM?
-
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
ThanksFrom the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
Need to install and run Reports & Forms on Windows 98. Help!!
Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent.Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent. I am having the same problem, but with Windows ME. I was able to get Oracle 8i to work by entering a line in the Compatibility 95 section of my win.ini, and I installed the Forms & Reports for NT, but it won't see my database. -
Will Adobe Photoshop Elements 8 install and run using Windows 8 OS
Will Adobe Photoshop Elements 8 install and run correctly using Windows 8 OS?
Hi regnis33,
Please find the system requirement for installing Photoshop Elements 8: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop-elements.h tml
Regards,
Romit Sinha -
Unix Perl Script To verify a Up and Running Database on Different Server
Unix Perl Script To verify a Up and Running Database on Different Server
Hi
can any one please tell me a solution to verify a Up and Running Database on Different Server other than the one where we run the unix perl script? The perl script should check if the database is running else it must exit.
Thanks much
KiranThe other best solution would be Enterprise Manager, load the EM on the other machine and install oracle intelligent agent on all the boxes where oracle is running and problem solved.
FTP is only a File Transfer Protocol, you can upload/download the files but cant execute them.
Apart from EM the best way is load oracle client and make connection to all the databases.
AND There are some free oracle monitoring software available I dont know much about them but one is NAGIO (if I am not wrong), try that if you want.
BTW whats the problem in monitoring the boxes from the same physical box, means just schedule a script using cron on the same physical box where oracle is to either make connection using SQLPLUS or check the processes using "ps" command and if there is anything wrong then send alert from that box only. In this way there is no need to maintain a central monitoring server.
Daljit Singh -
Is JServer is installed and running?
how do I verify JServer is installed and running?
I did the following and found JAVA TRUE but is there more to it?
select * from v$option;
thank u.Hi,
In your session, try anything that requires Java.
I usually use
SQL>select dbms_java.longname('foo') from dual;
This has the side effect to initiate Java in your session, unless Java is not installed.
Kuassi http://db360.blogspot.com -
JServer installed and running?
how do I verify JServer is installed and running?
I did the following and found JAVA TRUE but is there more to it?
select * from v$option;
thank u.Hi,
In your session, try anything that requires Java.
I usually use
SQL>select dbms_java.longname('foo') from dual;
This has the side effect to initiate Java in your session, unless Java is not installed.
Kuassi http://db360.blogspot.com -
Is it possible to install and run Acrobat Standard or Pro on a Surface Pro 2 tablet?
Does anyone know if is possible install and run Acrobat Standard or Professional on a Surface Pro 2?
and, if is possible to use COM automation to fill AcroForms?
Thanks and regards,
AdolfoDoes it run regular Windows 8 (allowing you to install the same apps as older versions of Windows in the desktop) or does it run Windows 8 RT, where only apps from the Windows Store are allowed? It looks like regular Windows 8, in which case you can try out the free trial of Acrobat Pro.
If it works, the Acrobat SDK (separate download) has all developer information on Acrobat, and you need it (give up any idea you will find code ready for use on Google...)
Maybe you are looking for
-
How to call an include in a field Exit?
Hi Guys, i am having a doubt ,How to call an Include in a field Exit function module. i wrote as "include zxx_incl." but if i wrote like this in my Field Exit i am getting a Suntax error "Recursive INCLUDE nesting in program
-
How to avoid table refresh on row selection
Hi, I have a table where the row selection happens on selecting the check box in the first column of the row. The check box is bound to the transient Boolean attribute of my VO to support this functionality which is missing in new version of ADF. The
-
What do I need to install a second HD on HP Pavilion DV7
A friend had purchased a HP Pavilion DV7 -6B50EB that came with 1 TB hard disk. On the PC there is an empty slot for a second disk. What is needed to install the second hard disk ? The slot contains a HD container but there is no connecting wires to
-
If I sync a video that's on my PC to the iPod, I believe iTunes shrinks it as it's copying it to the iPod which makes sense since you don't want huge videos (or pictures) copied there. My question is, what happens when it syncs back to the PC; will i
-
Hyperdraw - to replace Automation
Having entered the nightmare that is Logic automation and now being resigned to the fact that it is unworkable for certain jobs I am reverting back to Hyperdraw. ..... so oldskool it hurts..... In tests with it - mostly the issue of moving data about