Pre-requisite ARIS installation

Hi,
I want to know in order to work with ARIS what all software u need to install or wat are the plugin required??
currently i m working on SP 14
pls let me knw the all pre-requisite required for ARIS installation
Thanks in advance

Hi Anu,
Please go through the below link.. It has all the details related to ARIS and ARIS for Netweaver..
http://www.ids-scheer.com/international/english/products/aris_implementation_platform/49637
Hope this helps you..
Please award points if this is helpful..
Regards
Kiran..

Similar Messages

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Pre requisites and steps for BI content installation.

Hi ,
We need to install Complete BI content in our production system , I am aware of the steps to be exeuted in SPRO but wanted to know the complete procedure step by step .
1) what are the pre requisites and checks before and after doing activation in SPRO .
2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue .
3)Can we do activation directly in Production ?
Thanks,
Neetika.

Hello Neethika, for your second question
2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue
If the object which you are going to install is already active and if it is customised, and if you go for reinstallation, new standard object will reinstall the already customised existing oblect. However, if you select the check box MATCH (X) or COPY and do the installation, object will be activated with retainging customisation. so there will be no need to customise it again.
It is always recommended to go for manual collection of objects rather then automatic collection, because there might be wierd chances that all the objects might not get activated and this will cause a problem while you move the same from DEV to PRODUCTION.
feel free write if any further clarication need
Thanks

Pre-requisites before doing TDMS installation

Hi,
Can any one give me pre-requisites before doing TDMS installation
Regards
Kiran,

Hi,
Please check the documents in the First Post of the Forum i.e.
Links, Documents, Support Pack Schedule
This would give you all the details that are required.
Regards,
Suman

SYCLO INSTALLATION PRE-REQUISITES and Procedure

Hello guys,
i am now starting a new mobility enhancement on SYCLO. Since i am new to SYCLO i googled some of its concepts and my primary concern is to configure Syclo in our Enterprise Landscape. so i want to know about the pre-requisites like :
1.what are the ADD-ONS need to be installed for syclo.
2-how Agentry mobile platform is integrated and built.
3-how Syclo's Agentry Editor is worked nested with Eclipse Development platform and installation procedure.
4- some more concepts on SMP 2.3.
so guys help me regarding on this SYCLO work-shop.
Thanks
ashish satapathy
Tags edited by: Michael Appleby

I am also new to syclo and so far i have come across these add-ons to be installed at ERP system.
SMFND 610_700
SMERP 610_700
Ref: Re: How to do app configuration in SAP ERP system for Agentry development
Regards,
Jitendra

Mcod installation pre-requisites

Dear All,
I am about to install MCOD system. ECC6.0 is already installed on the host,
Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Could you please let me know what are the pre-requisites we take before i start the
CRM installation.
- Do we have any effect on to the existing env. variables because i have to start
installation from the same host -root user
- Do we need to take any special actions for the listener configuration?
- I got through from Inst guide , we need to increase the free space in SYSTEM tablespace
if you can provide any other pre-requisites, It will be greatful for me.
Thanks and Regards

> I am about to install MCOD system. ECC6.0 is already installed on the host,
> Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Are you really SURE you want to do that? MCOD has more drawbacks that pro's.
- Database maintenance requires both systems (ERP + CRM) to be shut down
- system copies using backup/restore are always done for both systems (can be tricky)
- in case of a logical error you have to reset both systems (imagine that in your ERP!)
I would install a separate Oracle software and use a second ORACLE_HOME to separate both instances from each other. The only cost of that is local harddisk space for the Oracle software.
Markus

Pre requisites for AIX Installation for NW2004s

I need to install NW2004s in AIX Machine with Oracle Database
the hardware team is in the process of installing the AIX Machine af of now.
Pls let me know if any other pre-requisite has to be followed as a part of installation

Hi Balaji,
Pls check the AIX version and patches if any are required for NW2004s installation.
so pl refer http://service.sap.com.pam.
Then follow the installation guide that you must have with you for further activities.
Hope this is useful
Regards
Umesh

Win2000: Installer quits during "Executing pre-requisites..."

Hello all. I tried to install Oracle 8.1.7 on Windows 2000
Advanced Server (w/SP2) and every time the installer just quits--
no error message, nothing, the window just disappears--after
choosing the type (Typical, Minimum, Custom), about 30% through
the status bar when it says "Executing Pre-requisites...".
Since didn't have much luck with that, I went ahead and
installed Oracle on a Linux machine. Now I get the same problem
when I just try to install the Client on Windows 2000. After
choosing the type of client (Admin, Programmer, etc) it starts a
status bar, and the installer just disappears after it gets
to "Executing Pre-requisites..."
Anyone have any idea what's going on here? This has actually
occurred on two different Win2000 machines here. The only common
factor I could see was that both of them had been upgraded to
Internet Explorer 6. So I installed an old 4.7 versino of
Netscape and tried again but had the same problem.
Thanks a lot.
--Dan

Hello All,
I got the same problem when installed Oracle8i with Intel
Pentium 4...So I thought that Oracle8i did not support Intel P4
at all...In fact, they did not support P4 in this time....If
anyone figures it out..please share big references...
Regards,
-- Jerry --

What are the System pre-requisite for the BODS installation(SAP Data services)

I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

Hi Siddhu,
Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
Tutorial: How to install SAP Data Services 4.2 - Part 1
Regards
Arun Sasi

Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
Manish

Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish

Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisS

I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better.

Swap Space error in pre requisite check of NWDS2004(Support Pack18)install

Hi,
Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
==============================================
Condition:- Swap Size
Result Code:- Condition not met
Severity:- HIGH
Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
=============================================
Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.

Hi Gandhi,
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
regards
Juan
Please reward with points if helpful

Error installing Service Provider Foundation- pre-requisite for configuring Windows Azure Pack

We are trying to setup lab at our premises to get hands on with WAP and explore.
We are able to install all the pre-requisite software’s except the "Service Provider Foundation (SPF)" component. Using SPF we are trying to configure the WAP that is installed successfully.
Software installed on Target machine-
Win Server 2012 OS.
Server roles enabled on host-Hyper-V,IIS, WSUS, File and storage services.
SQl Server W2k12-sp1-Standard edition in mixed authentication mode.
SCVMM.
WAP.
Issue description:-
We try to run the 'Orchestatorsetup.exe' with both Local admin/domain admin account. Pre-requisite check during the installation of SPF is successful.
When we select "Install” button, Setup.exe is getting terminated halfway through abruptly.
We tried to analyze the attached error log file extract.
[061C:0F60][2014-12-02T12:30:03.146+05:30]: Applying package: Id.Setup.msi, action: Install, path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\Microsoft.SystemCenter.Foundation.Setup.msi, arguments: ' INSTALLLOCATION="C:\inetpub"
SCVMMCHECKED="1" SCDPMCHECKED="0" SCOMCHECKED="0" SCSMCHECKED="0" WEBSITE_NAME="SPF" PORT_NUMBER="8090" SPECIFY_CERTIFICATE="0" CERTIFICATE_STORE="My" CERTIFICATE_SERIAL="1714309174975BA5442B9ADF17FB6657"
USE_SSL="1" SCVMM_APPPOOL_NAME="VMM" SCVMM_DIRECTORY_NAME="VMM" SCVMM_USERNAME_VALUE="NETWORK SERVICE" SCVMM_DOMAIN_VALUE="NT AUTHORITY" SCVMM_PASSWORD_VALUE="" SCADMIN_APPPOOL_NAME="Admin"
SCADMIN_DIRECTORY_NAME="Admin" SCADMIN_USERNAME_VALUE="NETWORK SERVICE" SCADMIN_DOMAIN_VALUE="NT AUTHORITY" SCADMIN_PASSWORD_VALUE="" SCPROVIDER_APPPOOL_NAME="Provider" SCPROVIDER_DIRECTORY_NAME="Provider"
SCPROVIDER_USERNAME_VALUE="NETWORK SERVICE" SCPROVIDER_DOMAIN_VALUE="NT AUTHORITY" SCPROVIDER_PASSWORD_VALUE="" SCUSAGE_APPPOOL_NAME="Usage" SCUSAGE_DIRECTORY_NAME="Usage" SCUSAGE_USERNAME_VALUE="NETWORK
SERVICE" SCUSAGE_DOMAIN_VALUE="NT AUTHORITY" SCUSAGE_PASSWORD_VALUE="" SCDPM_APPPOOL_NAME="DPM" SCDPM_DIRECTORY_NAME="DPM" SCDPM_USERNAME_VALUE="NETWORK SERVICE" SCDPM_DOMAIN_VALUE="NT AUTHORITY"
SCDPM_PASSWORD_VALUE="" DATABASE_SERVER="localhost" DATABASE_PORT="1433" DATABASE_EXISTS="False" DATABASE_NAME="SCSPFDB" DPM_SECURITYGROUPUSERS="WAPLABS\vmmadmin" VMM_SECURITYGROUPUSERS="WAPLABS\vmmadmin"
ADMIN_SECURITYGROUPUSERS="WAPLABS\vmmadmin" PROVIDER_SECURITYGROUPUSERS="WAPLABS\vmmadmin" USAGE_SECURITYGROUPUSERS="WAPLABS\vmmadmin" ARPSYSTEMCOMPONENT ="1"'
[061C:0F60][2014-12-02T12:30:24.948+05:30]: Error 0x80070643: Failed to install MSI package.
[061C:0F60][2014-12-02T12:30:24.949+05:30]: Error 0x80070643: Failed to execute MSI package.
[18C0:17D4][2014-12-02T12:30:24.950+05:30]: Error 0x80070643: Failed to configure per-machine MSI package.
[18C0:17D4][2014-12-02T12:30:24.952+05:30]: Error 0x80070643: Failed to execute MSI package.
[061C:0F60][2014-12-02T12:30:24.952+05:30]: Removing cached package: {69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0, from path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\
[18C0:17D4][2014-12-02T12:30:24.957+05:30]: EverestBootstrapperApplication_ExecuteComplete
[18C0:17D4][2014-12-02T12:30:24.958+05:30]: MSI execution completed
[18C0:17D4][2014-12-02T12:30:24.963+05:30]: Installation finished
Workaround tried:-
1. As per the TechNet MS site changing the time zone to Pacific/London time zone. Tried it but issue persists.
2. Tried to run the setup.exe using domain account and local admin account.
Any help appreciated much..

UAC was turned off and installation was tried using local admin account. The error log suggested it was failing to create a firewall exception rule for 8090/UDP port. Windows Firewall service was enabled. SPF got installed successfully.
Thanks Darryl for helping us break the deadlock :)

Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhan

http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH

Pre requisite errors

Dear All,
The pre requisite checker run for SAP ECC6 installation on Solaris 10/Oracle using zones gives following errors:
1) Environment variable CPIC_MAX_CONV should be set and the value should be at least 200
I've done this on windows. Used "set env CPIC_MAX_CONV=200" on Solaris. SAPInst does not recognize this.
2) It is recommended to add the entry 'set rlim_fd_cur=8192' to /etc/system. Current value: not available. See also SAP Note 395438. Note that this is checked only for an entry in /etc/system. The value found might not be the effective one. (Updated 2005-06-24)
I've already made entry in /etc/system but again it is not recognized.
Any suggestions please.
regards, Sean

The correct command should be : setenv CPIC_MAX_CONV=200
In csh this should be: setenv CPIC_MAX_CONV 200
..without '='
In bash a simple: export VAR=<value>
..will do.
Permanent variables for SAP environments are usually stored in .sapenv* files in home of <SID>adm
Nelis
Edit: By the way that note 395438 refers to parameter settings for Solaris 9 and below. You will want to look at [Note 724713 - parameter settings for Solaris 10|https://service.sap.com/sap/support/notes/724713] rather. Note the "Please do not use any old /etc/system settings from SAP note 395438 with Solaris 10".
Edited by: Nelis Lamprecht on Jun 26, 2008 3:46 PM

Pre-requisite ARIS installation

Similar Messages

Maybe you are looking for