Pre-requisite for exam 1Z0-147?

Hello,
I am planning on getting the Oracle PL/SQL Developer Certified Associate. I am not sure on which exam I should take prior to the 1Z0-147.
Which one is best: 1Z0-007 or 1Z0-001?
Thanks for your help,
Patricia.

I suggest to take 1Z0-007. Although 1Z0-001 covered both SQL and PL/SQL, but taking 1Z0-007 will help you to learn and improve the basic requirement to know PL/SQL which is SQL. I'm also planning to take the PL/SQL Developer OCA I realized to give a separate concentration in on SQL and PL/SQL. Once you finished 1Z0-007, you can feel confident that you know most of the SQL concepts. And now you can focused on improving your skills in PL/SQL by preparing for 1Z0-147.
I hope it helps you in deciding which exam to take prior to 1Z0-147.

Similar Messages

  • Topics for exam 1Z0-147?

    Hi,
    I am wondering if the following topics are the part of exam 1Z0-147? I can't find these contents on oracle website under exam 1Z0-147.
    1- UTL_MAIL
    2- UTL_TCP
    3- DBMS_JOB
    4- DBMS_LOCK
    5- SECUREFILE LOBs
    Thanks

    user9152699 wrote:
    Hi,
    I am wondering if the following topics are the part of exam 1Z0-147? I can't find these contents on oracle website under exam 1Z0-147.
    ThanksI normally answer questions like this, but when people particate in privately things off of the forum {thread:id=1035697} then I feel there is a possibility I may be assisting inappropriate learning and will not assist.
    I again refer you to [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html] though I suspect that all that the most that may be at issue here is breach of SelftestSoftware Licensing .....
    In the meantime please wonder ......

  • Merging for Exam: 1Z0-147 and 1Z0-007 and get OCA certification

    Hi,
    I want to merge my two certification examination that I have successfully passed 1Z0-007 (Introduction to Oracle9i: SQL) from PROMERIC, and 1Z0-147 (Program with PL/SQL) from Pearson VUE.
    What is the procedure to get both cretification merged and get OCA certificate?
    How much time this process will take?
    Thanks
    Uday

    Uday Dibya wrote:
    Hi,
    I want to merge my two certification examination that I have successfully passed 1Z0-007 (Introduction to Oracle9i: SQL) from PROMERIC, and 1Z0-147 (Program with PL/SQL) from Pearson VUE.
    What is the procedure to get both cretification merged and get OCA certificate?
    How much time this process will take?
    Thanks
    Uday0) Warning: Dont publish your Oracle Testing Id. or Prometric Id. on this website, it would be a breach of the NDA you have agreed to.
    0.1) Register with certview.oracle.com ... it helps to know where you are at..
    1) Identify your Prometric Number that you took your prometric exam under.
    2) Identify your Oracle Testing Id. you have under Pearson VUE.
    3) If they are the same all is ok.
    4) If they are different full details of both will need to goto Pearson VUE requesting a merge. (I haven't recently checked the FAQs for updates on this procedure.
    5) Dont try to request a merge while you certview regsitration is in progress.

  • Which book topics to follow for exam 1Z0-007? Sybex or Oracle press?

    Hi, I am studying following both books for exam 1Z0-007 but sybex book by Chip Dawes covers more topics then oracle book. I am wondering if i still need to study those topics in sybex book which are not covered in oracle press book? For example DML Locks have been discussed in detail in sybex book as compare to oracle book and few topics are missing in oracle press and don't know if there will be any question in the exam from those topics?
    1) OCP Introduction to Oracle9i: SQL Exam Guide by Jason Couchman
    2) OCA/OCP: Introduction to Oracle9i SQL Study Guide by Chip Dawes, Biju Thomas
    Can anyone pls advise? Also i like to know if SelfTest software covers same questions which are in sybex and oracke press book? Because SelfTest software has same questions for microsoft exams which are already in the cd of microsoft official press books.
    Thanks

    user10878991 wrote:
    Hi, I am studying following both books for exam 1Z0-007 but sybex book by Chip Dawes covers more topics then oracle book. I am wondering if i still need to study those topics in sybex book which are not covered in oracle press book? For example DML Locks have been discussed in detail in sybex book as compare to oracle book and few topics are missing in oracle press and don't know if there will be any question in the exam from those topics?
    1) OCP Introduction to Oracle9i: SQL Exam Guide by Jason Couchman
    2) OCA/OCP: Introduction to Oracle9i SQL Study Guide by Chip Dawes, Biju Thomas
    Can anyone pls advise? Also i like to know if SelfTest software covers same questions which are in sybex and oracke press book? Because SelfTest software has same questions for microsoft exams which are already in the cd of microsoft official press books.
    ThanksChill.
    The proper method is to look at the exam topics on [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_007] which is authorative.
    either the Sybex or Oracle Press book is authorative, and sometimes exam changes after these are printed (with revision from 9iR1 to9iR2 for example).
    In general you should probably have enough material in the two books given for this exam. Its probably cheaper to take the exam itself rather than buy additional Selftest questions. Your time may well be better spent practicing the things you have trouble with. Also be aware these books can have errors. And learn whichever is in either book even if it isnt examined. Its good for you!

  • Pre-requisites for installing Oracle 10gR3 on RedHat Linux

    Hi All,
    I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
    Could someone please let me know where I can find this info?
    Thanks,
    Madhan

    http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
    HTH

  • What are the pre requisites for implementing ChaRM

    Hi
    We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
    Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
    Thanks & Regards
    Anand

    The listed pre-requisites for the implementation of ChaRM are;
    1.  Already completed the basic configuraiton of SAP Solution Manager
    2.  You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
    3.  you have setup business partners for the users (or at least 1)
    4.  satellite systems are at the minimum  support package level required (note 907768)
    5.  connections are available to the satelite systems
    6.  CTS+ if you wish to control non ABAP change requests through ChaRM

  • What are the pre requisites for SPLIT VALUATION OF A MATERIALS

    Dear friends
    What are the pre requisites for creating SPLIT VALUATION for  A MATERIAL in particular Plant
    regards
    Radha

    Hi,
    I am not sure what you mean exactly.
    But you would need to have the valuation category and all of the valuation types created in config in advance.
    Then you can allocate the appropriate valuation category to the material (accounting view) (as long as no stock or open POs etc. exist).
    then you can create your additional accounting views (one for each valuation type that you want to use).
    Steve B

  • Pre requisits for Internation HR and Payroll Setups

    Hi All,
    Can any one help me in Pre requisits for Internation HR and Payroll Setups.
    Thanks in advance.

    Here's some stuff to get you started:
    International HR and Payroll (Doc ID 261452.1)
    Running International HR and Payroll Setup (Doc ID 278006.1)
    HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
    If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

  • Pre-requisites for OS X 10.9 Upgrade??

    Hello. I am considering an upgrade to my Mac OS (on both a Mac and a Mac Air). The details of my Mac are:
    Processor  2.5 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6750M 512 MB
    Serial Number  C02H9SRGDHJF
    Software  Mac OS X Lion 10.7.5 (11G63)
    At present the OS on both my Mac and MacAir is OS X Lion 10.7.5.
    I have been considering purchasing OS X10.8 Mountain Lion but decided to wait until OS X 10.9 Mavericks was issued. This was because I did not see the point in purchasing OS X 10.8 just before it was about to be superseded by a new version OS (in this case OS X 10.9); and I was unable to ascertain whether OS 10.8 would be an essential pre-requsite for OS X 10.9 or not.
    I have now seen that I can upgrade (free) to OS 10.9 Mavericks – straight onto my existing OS X Lion 10.7.5. This implies that I do not need to upgrade to OS 10.8 Mountain Lion beforehand. If OS X 10.8 it is not an essential pre-requisite for OS X, it seems to me that there is no advantage gained by purchasing it.
    Please can someone advise me if there is any advantage in upgrading to OS 10.8 before going on to further upgrade to OS 10.9? Does OS 10.8 have any additional features that OX 10.9 Mavericks does not have, or needs in order to be fully enabled? In short, do I need OS X10.8 beforehand to take full advantage of the OS X 10.9 upgrade?
    Any advice appreciated.

    Apple User7 wrote:
    Please can someone advise me if there is any advantage in upgrading to OS 10.8 before going on to further upgrade to OS 10.9?
    Nothing. OS X Mavericks has got the same features if you upgrade from OS X Lion instead of OS X Mountain Lion apart from the features that need a specific computer, so don't worry about it. Upgrading to Mountain Lion first would be a waste of money.
    Open the Mac App Store and download OS X Mavericks. If your computer isn't supported, the Mac App Store will give you an error message. Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • Is UCertify any good for exam 1Z0-007?

    Hi, I am thiking about buying UCertify practise questions for exam 1Z0-007, i am wondering if anyone has used it in the past and how good is their product?
    I can't afford Transcender prep material, the other option is SelfTest but they provide money back guarentee in 2nd shot. Ucertify offers more practise questions then SelfTest but really don't know how good they are?
    Does SelfTest offer same practise questions which comes in Oracle press book CD?
    I have already studied the sybex and Oracle press book but there are few topics which you really can't memorized them like functions , sybex book has covered alot of functions as compared to Oracle press book and i know the half of them becuase i have used them in my job. So if i buy SelfTest practise questions then do i need to practise only those functions which have been covered in practise exams? Or other function topics can be asked in real exam?
    Thanks

    user10878991 wrote:
    Hi, I am thiking about buying UCertify practise questions for exam 1Z0-007, i am wondering if anyone has used it in the past and how good is their product?
    I can't afford Transcender prep material, the other option is SelfTest but they provide money back guarentee in 2nd shot. Ucertify offers more practise questions then SelfTest but really don't know how good they are?
    Does SelfTest offer same practise questions which comes in Oracle press book CD?
    I have already studied the sybex and Oracle press book but there are few topics which you really can't memorized them like functions , sybex book has covered alot of functions as compared to Oracle press book and i know the half of them becuase i have used them in my job. So if i buy SelfTest practise questions then do i need to practise only those functions which have been covered in practise exams? Or other function topics can be asked in real exam?
    ThanksInteresting question.
    Its always good to refer back to [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html]
    Usually I find myself refering people back to that because they are going for unauthorised learning material, but I'll refer you to that as compliment for staying on the right route, and also because it has a couple of tips that might help.
    Obviously Transcender/Selftest are the authorised practice test providers, (though they are now both owned by the same company Kaplan IT) and it is not recommended to buy both Transcender and Selftest for the same exam as material may be similar. Generally they market Transcender is better but more expensive (certainly for more recent exams).
    [http://www.certguard.com] shows the offical Ucertify website as a SAFE website so you would be IMHO showing sufficient due dillegence in purchasing from this Vendor. Be aware however that unscrupulous third parties may be trying to either pretend to be Ucertify when they are not by setting up similar sounding websites and others may be selling Ucertify material in beach of conditions. Anyway a quick prowse round for me in the UK shows:
    A uCertify 1z0-007 is currently on special offer at just under 1/2 the price of the oracle exam
    A Selftest Software Practice Test 30 day online access is about just over 1/2 the price of the oracle exam
    A Selftest unlimied time software download is a about 80% of the cost of the oracle exam.
    At a guess without looking Transcender will probably be 20-30% more expensive than Selftestsoftware.
    Bear in mind I have not seen tests from any of these Vendors myself. From my memory, which is imperfect, I recall seeing comments that uCertify was typically of a lower quality than say transcender for some tests. However even if this was true it may have changed.
    To some extent for you wishing to minimze expenditure the question is is forking out extra money on practice tests worth it when you may pass the exam anyway?
    To some exent there should be enought practice tests between the Orace and Sybex Books and associated CDROM's to cover the exam well enough anyways (though bear in mind this is an older exam was have had an update to topics since exam was printed .... and arguably quality has usually improved somewhat with books for later exams like 1z0-051). You may however have exhausted all he test/practice questions too early, and a test question/exam is mos valuable the first time you see it, and it loses value the second time you see it as you may remember the answer. I try to take practice tests only after I think I have practiced and learnt all the material fully (and this applies even to the end of chapter practices).
    My suggestion would be:
    Dont answer any practice tests for a week (or two).
    Make flashcards of the thing you need to memorize.
    Practice and revise through the books you hve (but dont look at questions).
    To not revise immediately before taking practice tests.
    Then go through the questions at the end of the chapters.
    However well you did re-revise the chapter afterwards, make ore flashcards if necessary.
    If you got less than say 85% on any chapter redo that 2/3 days later.
    Then take CDROM practice tests. If your getting less than 85% then dont go back to the next test but redo difficult areas.
    If your getting 80 - 85% on the last CDROM test then take the exam.
    (or if you really feel you need to buy some prctice tests).
    Lookout in the FAQs for advice by Hans also.
    Edited by: bigdelboy on 21-Nov-2009 03:33 (Be aware these Oracle Press Books, Tests and CDROMs may have occasional mistakes, wrong answers and CDROM glitches ... this can be especially true of the older publications)

  • What are the pre-requisites for learning OA Framework?

    Hi,
    Im new to oaf,can any body help on this
    What are the pre-requisites for learning OA Framework?
    Karthik

    In order to develop any OAF Application you need to know few concepts before doing any kind of development. The concepts are basically the Business Components for Java(BC4J) components.
    They are:
    Application Module(AM)
    Entity Object(EO)
    View Object(VO)
    Association Object(AO)
    View Link(VL)
    Now let us see the description of each component.
    Application Module:
    Application Modules serve as a containers for related BC4J components. The pages are related by participating in the same task. It also defines the logical data model and business methods needed.They provide the transaction context and also used for establishing database connection. AM’s can be nested to provide more complex AM’s.
    Entity Object:
    EO encapsulates the business logic and rules.EO’s are used for Inserting,Updating and Deleting data. This is used for validating across the applications. We can also link to other EO’s and create a Association object.
    View Object:
    View object encapsulates the database query. It is used for selecting data. It provides iteration over a query result set.VO’s are primarily based on Eo’s. It can be used on multiple EO’s if the UI is for update. It provides a single point of contact for getting and setting entity object values. It can be linked together to form View Links.
    Association Object:
    An association object is created where we link EO’s. For example take the search page where we link the same EO to form a association between the manager and employee. Every employee should have a manager associated. But if it President then no there is no manager associated. This is a perfect example to understand the AO.
    View Link:
    A view link is an active link between view links. A view link can be created by providing the source and destination views and source and destination attributes. There are two modes of View link operation that can be performed. A document and Master/Detail operation.
    -----Let me know if you need more information
    Regards
    Meher Irk
    Edited by: Meher Irk on Oct 23, 2010 10:45 AM

  • Pre requisites for installing SAP Router

    Hi Friends,
    As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
    I have some questions to put forth.
    1. what are the pre requisites for SAP Router
    2. Do we require Public IP and what would be the use of this ip
    3. how to configure the SAP Router
    4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
    Regards
    Aayush

    Installing the sapcrypto library and starting the SAProuter
    Contents
    u2022     Downloading necessary software components from SAP Service Marketplace
    u2022     Creating the certificate request
    u2022     Additional actions necessary before you can start saprouter
    This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
    The license for the sapcrypto library covers  saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
    Downloading necessary software components from SAP Service Marketplace
    1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
    2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
         a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
         b.     For more information on how to obtain authorization if download is not possible see note 397175.
         c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
    3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
    4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
    These are packed into a single CAR file sapcrypto.car
    5.     Copy the file to the direcory where the saprouter executable is located
    6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
    Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
    [lib]sapcrypto.[dll|so|sl]
    sapgenpse[.exe]
    ticket
    Creating the certificate request
    1.     As user <snc>adm set the environment variables
    SECUDIR = <directory_of_saprouter>
    2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
    3.     Generate the certificate Request with the command
    sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
    4.     Alternatively use the two commands:
    sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
    sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
    5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
    6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
    7.     With this in turn you can install the certificate in your saprouter by calling
    sapgenpse import_own_cert -c srcert -p local.pse
    8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
    sapgenpse seclogin -p local.pse -O <user_for _saprouter>
    9.     This will create a file called cred_v2 in the same directory.
    For increased security please check that the file can only be accessed by the user running the SAProuter.
    Do not allow any other access (not even from the same group)!
    On UNIX this will mean permissions being set to 600 or even 400!
    On NT check that the permissions are granted only to the user the service is running as!
    1.     Check if the certificate has been imported correctly
    sapgenpse get_my_name -v -n Issuer
    The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
    2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4.  If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
    4.,7.,8. and 10.
    Additional actions necessary before you can start saprouter
    1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
    SNC_LIB has the form
    UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
    Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
    2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
    UNIX     printenv
    Windows NT     System environment variable
    3.     start the saprouter with the following command line:
    saprouter -r -S <port> -K "p:<Your Distingushed Name>"
    -K tells the saprouter to start with loading the SNC library
    the corresponding file ./saprouttab should contain at least the following entries
    inbound connections MUST use SNC
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
    repeat this for the servers and port_numbers you will need to allow,
    please make sure that all explicit ports are inserted in front of a
    generic entry '*' for port_number
    outbound connections to <sapservX> will use SNC
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
    permission entries to check if connection is allowed at all
    P <IP address of a local host> <IP address of sapserv2>
    all other connections will be denied
    D  * * *
    Example
    For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
    SNC-connection from and to SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    SNC-connection from SAP to local R/3-System for Support
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
    SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
    SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
    Access from the local Network to SAPNet - R/3 Frontend (OSS)
    P <IP-addess of a local PC> 194.39.131.34 3299
    deny all other connections
    D * * *
    Lalit Kumar

  • Pre Requisites for Implementing the CUE

    Hi,
    I have an  IP Telephony set up with CME in 2 different branches.We need to implemet the AA in sites.
    What are the pre requisites for hardware and license based  that need to check before implementing the CUE.
    one site having cisco 2911 router with Version 15.2(2)T3 and with interface ISM module is present which would like to configure for the AA.
    second site having 2901 with Version 15.0(1r)M16 and  with interface Embedded-Service-Engine0/0.
    Attached is the Show tech support for each CME's .
    Thanks in advance
    Nithin Louis.

    Hello
    if there is no module installed you can completely ignore Embedded-Services-Engine as it won't be doing anything. Embedded Service Engine
    Overview:-
    Cisco Integrated Services Routers Generation 2 (Cisco ISRs G2) have dual  core CPUs on the motherboard. The first core runs Cisco IOS software as  Cisco Integrated Services Routers (ISRs) do; the second core, or the Embedded Service Engine, is capable of running Linux-based applications.
    The following Cisco ISR G2 platforms support the Embedded Service Engine:
    •Cisco 2911
    •Cisco 2921
    •Cisco 2951
    •Cisco 3925
    •Cisco 3945
    Note:- As above 2901 not support embedded service engine . May be you got it on the CLI , because you run the same S/W version.Reference 
    https://supportforums.cisco.com/discussion/11184226/interface-embedded-service-engine00
    *That is why i did not mention for Embededd service engine module supportedwith Cisco 2901, so kindly check. The above post Cisco document for compatibality.If you need to try , so try with minumum memory 1G as 2911
    Memory required for 2911,2921 is 1G , 2951 is 1.5 G , 39XX is 2.5 G.My advise to you to go through  ISM-SRE-300-K9 , and shut Embedded service engine .
    Thanks
    please rate all useful information

  • Pre-requisites for implementing WMS for an Existing Organization.

    Dear Folks,
       My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
    Are there any pre-requisites to be done before implementing WMS on this organization?
    Any help is  highly appreciated.
    Regards,
    Sri

    >
    venkatesan janardhanam wrote:
    > Hi Experts
    >
    > We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    >
    > I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    >
    > Thanks in advance
    >
    > Thanks & Regards
    Hello Venkatesan,
    There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
    Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
    Regards
    Amit

  • Pre requisites for certification

    Dear All,
    I would like to attend the certification test.Plz tell me what are the pre requisites for that? I came to know that S- code is mandatory for that.Plz clear my doubts
    Vinay

    Hi,
    BRowse the website www.vue.com for more info about certification of SAP B1.
    The SAP S-ID is used to register in VUE.  Usually the S-ID consists of partner S-Id and customer S-Id.
    Rgds,

Maybe you are looking for