Pre-requisite to generate procurement proposals

Hi, Pls advise what are the pre-requisite to generate procurement proposals in mdbt for any material? if we define material master, bom, routing and sales order, whether it will generate proposals? pls advise.

Dear,
Yes system will create the procrument proposal if demand is there and planning file entry MD21 exist for that material (with MRP view).
Regards,
R.Brahmankar

Similar Messages

Purchase Requisition Automatically Generating Issue

Hi Guru:
I failed to generate the purchase requistion after MRP running via transaction md03,please see my setting of MRP1-4 as below:
MRP1:PD as MRP type,then the reorder point is 300,the measurement of unit is KG,I set FX as lot size,and fixed lot size is 100.
MRP2:the procurement type is F,and plan delivery time is 2 days,GR processing time is 1 day.
MRP3:period indicator is M,availability check is 01,total replenish lead time is 3 days.
And I had maintained the contract and source list to this material,but it cannot be generated purchase requisition automatically,what's wrong???Help!

You can run MRP again with proper parameters and you will get PurReqs directly instead of PldOrds:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2da044af11d182b40000e829fbfe/frameset.htm
("Creation indicator for procurement proposals for materials that are procured externally")
You can use parameters: 1, 3, 1, 3
Regards,
Csaba

Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
Manish

Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish

Purchase requisition not generated

Hi Gurus,
Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
Thanks in advance...

Hi,
As per my understanding, you are running Third Party Process, if yes then, please maintain the following setting for the same;
Mater Data Settings:
1. Item Category Group as BANS in sales org 2 in MM02
2. in MRP2, in procurement type should be 'F'
SPRO Settings:
1. Item Category TAS: Maintain Billing relevance as 'F'
2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
3.ASSIGNMENT: assign Schedule line CS to item cat TAS in VOV5 and TAS to order type in VOV4
4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
Now run the process..I hope this will help you...
Regards,
Bharat B

Migration pre-requisites for GR\IR clearing..

Hi All,
My client wants to migrate the data in production after upgrading the EHP5, the pre-requisites to data migration GR\IR ACCOUNT SHOULD BE ZERO.
In production they have open Purchase orders, its not possible to close the Pos.
I am thinking to pass a JV against the GR\IR (F-02) and clear open items in the account (f-03)
After upgrade I reverse and reset the document (which was generated in f-03
Please suggest me to any alternative way to meet the requirement.

In case of migration , if there are opne GR then only GR / IR would come in to pictiure .
Open Po's dont have an impact on GR/IR account for migrating PO.
Are there any opne or uncleared GR ? if yes then you will have GR/IR account into picture .
Elaborate your question to comment further .
Cheers ,
Dewang

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

What are the pre-requisite for JAVA Proxy communication?

What are the pre-requisite for JAVA Proxy communication?

Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

AutoCreate Final Assembly Orders - Pre-requisite setup details needed

Hi ,
I am a technical person and bit new to WIP module but to my understanding when AutoCreate Final Assembly Orders program runs, it creates a WO and also Requisition.
I was doing few test and found that for some sales order it is creating WO but not requisition i.e. I don't see Requisition Import being called by AutoCreate Final Assembly Orders program.
Can you please provide me what is the setup or pre-requisite for the AutoCreate Final Assembly Orders program to generate Requisition?
Thanks,
SM

[email protected] wrote:
[SOLVED]
There seems to be an issue with partitioning a swap partition as "swap" (wtf?) when using dm-crypt/Swap encryption. This is odd to me since reportedly systemd processes crypttab before fstab, but maybe it looks at the drives first before looking at either table file and then assumes all swaps are not encrypted and just mounts the standard unencrypted swap essentially reserving the partition so that dm-crypt can't access it - would be nice if systemd didn't do that, maybe not logically possible? Or, time for a new partition type, encrypted-swap? Anyway, I digress and notice that now my encrypted swap works as expected but still shows a partition type of "unknown"which feels like a hack.
So the solution:
sudo cryptsetup luksDump /dev/sdaX
Then follow the steps from the "dm-crypt/Swap encryption" wiki. Aside from long term solutions maybe this could be added to that wiki article?
thanks!
b1k
Had more time to play with this. The "cryptsetup" command isn't necissary. While this effectively "fixed" my swap partition that was partitioned as a "swap" partition - all that one needs to do is partition their swap as anything BUT swap. So maybe a quick blurb mentioning that in the "dm-crypt/Swap encryption" wiki article will save another noob a couple hours. It is sorta mentioned in the "Swap (Activation by systemd)" wiki article but it's hard to understand what the author was trying to convey (after re-reading I'm still not sure what problem the author is solving exactly).

Procurement Proposals In CBP.

Hi Everybody,
What is the Procurement Proposals in Consumption Based Planning. What are situations the It will be created.. Thanks in advance.

Hi vijay
Procurement proposals defines what kind of document to be proposed. Through MRP we can propose any one of this 3 document type.
Planned order- Used for internal and external procurement(purchasing)
Purchase requisition - Used for external prcurement
Schedule Line - if their is Schedule agreement exist with a vendor then we can go for this.
This option can be defined while you run MRP in tx MD03
Reward points if this helped you a bit
-Neo

Unicode Compatability is a pre requisite for ECC 6.0

Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika saini

Hi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

Afaria Environment setup and technical pre-requisites

Dear Gurus,
Could anyone help in providing the environment setup/technical pre-requisites for setting up the Afaria and its components?
We wanted to implement it in our production environment. Went through the Sybase documentation and got some overview on it. Would appreciate if some one share the documentation implemented in their environment.
Regards,
Raghu

Hi Shival,
I have a question about Afaria 7 parts.
Is it possible to install API ve AdminUI in different server than Afaria 7 Server?
I tried it but i get some error when try to open Afaria Admin Page. Such as:
Error accessing Afaria Administrator
Database service is not available.
Click here to reload the home page.
Show detail
And here is the detail:
Server Error in '/Afaria' Application.
RoleMgr.Initialize, Database not available
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: RoleMgr.Initialize, Database not available
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: RoleMgr.Initialize, Database not available]
   Afaria.Admin.Utilities.RoleMGR.Initialize(HttpSessionState session, String User) +794
   Afaria.Admin._Default.Page_Load(Object sender, EventArgs e) +449
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
   System.Web.UI.Control.LoadRecursive() +11424383
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3064
Have you any idea about how can troubleshoot and solve this?

HR ALE pre-requisites for transfer

Hi All,
I am looking to find out what is the pre-requisite for ALE for HR to work between 2 sap systems.
To spell it out more clearly, just as the G/L accounts would need to be present on both systems for ALE to happen, what are the requirements on HR before ALE can happen between 2 sap systems.
Please advise.

Hi Arun,
First u need to know the Msg type & IDOC type for this scenario.
Then u need to do ALE settings like
Define Logical Systems,Assign to clients,Define RFC destination,Port & partner profile creations and distribution model creation in both the systems.
after that generate partner profiles. there ends the ale settings.
U can find all these settings in SALE.
Thanks
Eswar

Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisS

I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better.

Swap Space error in pre requisite check of NWDS2004(Support Pack18)install

Hi,
Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
==============================================
Condition:- Swap Size
Result Code:- Condition not met
Severity:- HIGH
Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
=============================================
Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.

Hi Gandhi,
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
regards
Juan
Please reward with points if helpful

What are the System pre-requisite for the BODS installation(SAP Data services)

I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

Hi Siddhu,
Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
Tutorial: How to install SAP Data Services 4.2 - Part 1
Regards
Arun Sasi

Pre-requisite to generate procurement proposals

Similar Messages

Maybe you are looking for