Pre requisites for AIX Installation for NW2004s

I need to install NW2004s in AIX Machine with Oracle Database
the hardware team is in the process of installing the AIX Machine af of now.
Pls let me know if any other pre-requisite has to be followed as a part of installation

Hi Balaji,
Pls check the AIX version and patches if any are required for NW2004s installation.
so pl refer http://service.sap.com.pam.
Then follow the installation guide that you must have with you for further activities.
Hope this is useful
Regards
Umesh

Similar Messages

Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhan

http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Pre-requisites for installing OBIEE 11g

Hi folks,
Can anyone post me the pre-requisites for OBIEE 11g server installation.
Regards,
Arun

Hi,
Looback adoptor (Static Ip)
JDK/jrockit 1.6.0_29 and above version bit
RCU and OBIEE 11.1.1.6.0 software
Disk Space: 20GB or more
Available Memory: 20GB or more
Temp Space: 2GB or more
Swap Space: 3GB or more
CPU: dual-core Pentium, 1.5GHz or greater
For more Refer
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

Pre-requisites for SCCM 2012 R2

Hi Experts,
I want to know is it mandatory to install and configure WDS, WSUS and MDT before deploying SCCM 2012 R2
Are the Above roles prerequisites....????
What would be the possible pre-requisites for SCCM 2012 R2..???

For the pre-requisites, you can refer to the article that Torsten already shared.
As Torsten already mentioned, the installation of WDS, WSUS and MDT is optional. However, if you are planning to do OS Deployment (OSD) then consider installing WDS and MDT (Of course, you can install MDT if you would like to take advantage of its use).
As for WSUS, you can consider installing it if you would like to ensure a central management of Software Updates. So, depending on your requirements, you can decide what to do.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

ADFS2012R2 Install: Why does this need Active Directory Domain Admin Account as one of the pre requisites for installating AD FS server

Team,
We were trying to configure AD FS through ADFS Wizard on Windows 2012 R2 box as part of ADFS upgrade from ADFS 2.0 to ADFS 3.0. But the installation got stuck in between as the domain account which we were using does not have admin privileges on the AD side.
We have to raise to AD team to elevate the rights of the service accountb we are using.
Can any one please tell me why having an admin AD account is pre requisite for the AD FS configuration, what are the "Write" changes which occur at Active Directory side post ADFS installtion, we need this details to supply to AD team for the justification
purpose.
Would appreciate any detailed response on this query
thanks
Lav

Hi,
dont know all exact objects ADFS is trying to create in AD, but it needs to create some container and objects under cn=Programm Data,DC=domain,dc=com for sharing certificates.
We had troube with this because the container does'nt exists.
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Pre-requisites for running oracle forms 11G

What are the pre-requisits for running Oracle forms 11G?

Ok - where to begin?
From the beginning....
<blockquote>1. There are prerequisites for nearly every Oracle product. If you have not read the Installation Guide and Systems Requirements Guide you likely are missing something. Docs are [URL http://docs.oracle.com/cd/E24269_01/index.htm]here
2. If you followed the installation guide and completed the installation without error, the basic product works out of the box without any configuration changes. Don't start tweaking unless you understand the change.
3. In order to use an application server of any kind, you need to ensure it is running.
4. If you have chosen the "Development" installation type (applies to 11.1.2 only) then you will not have an HTTP Server and it is not needed. Your listener will be the WLS managed server (usually port 9001).
5. If you have chosed the "Deployment" installation type then you will have HTTP Server. You can access your Forms application via the HTTP Server Listen port (usually 8888) or the WLS_FORMS port.</blockquote>
To the issue that started this post... "+*Page cannot be displayed*+"
This error is either caused as a result of there being no listener running, specifically the HTTP Server or the wrong URL was entered in the browser, or the hostname used in the URL does not map to the correct machine where the listener is running. If you have installed and are testing on your local machine and that machine does not have a static IP address and/or a DNS registered name then fixing these issues would be a few of those "prerequisite" steps I mentioned. This is documented here:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm#BABFHBID
The above configuration needs to be completed before the installation is started.
To the next issue or change in error message: "+*Failure of server APACHE bridge: No backend server available for connection...*+"
This means that HTTP Server (specifically mod_wls) is unable to contact WLS_FORMS. This could be because WLS_FORMS is not running or because of those prereq steps noted above or a variety of other things related to not following the instructions. Refer to MyOracleSupport Note 1304095.1 for more details about this error.
Finally, as for the need for a JRE, you can do this either before you attempt to run a form or allow the autoinstall feature of the browser perform the installation. However, as Craig mentioned, you would be better off installing the latest version which is 1.6.0_33. You can change your configuration to automatically do this, but if you are new to FusionMiddleware and/or Forms doing the JRE installation manually at this point is probably a good idea. I also recommend starting with Internet Explorer because likely some config changes will be necessary to get it working.
As I mentioned, for the most part, the installation should work out of the box without changes. I would recommend getting the default form (test.fmx) running before attempting to make too many changes.
(If you chose the Deployment install type) http://youMachine:8888/forms/frmservlet?form=test
(If you chose the Development install type) http://youMachine:9001/forms/frmservlet?form=test
.

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

What are the pre requisites for SPLIT VALUATION OF A MATERIALS

Dear friends
What are the pre requisites for creating SPLIT VALUATION for A MATERIAL in particular Plant
regards
Radha

Hi,
I am not sure what you mean exactly.
But you would need to have the valuation category and all of the valuation types created in config in advance.
Then you can allocate the appropriate valuation category to the material (accounting view) (as long as no stock or open POs etc. exist).
then you can create your additional accounting views (one for each valuation type that you want to use).
Steve B

Pre requisits for Internation HR and Payroll Setups

Hi All,
Can any one help me in Pre requisits for Internation HR and Payroll Setups.
Thanks in advance.

Here's some stuff to get you started:
International HR and Payroll (Doc ID 261452.1)
Running International HR and Payroll Setup (Doc ID 278006.1)
HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

Pre-requisites for OS X 10.9 Upgrade??

Hello. I am considering an upgrade to my Mac OS (on both a Mac and a Mac Air). The details of my Mac are:
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 512 MB
Serial Number C02H9SRGDHJF
Software Mac OS X Lion 10.7.5 (11G63)
At present the OS on both my Mac and MacAir is OS X Lion 10.7.5.
I have been considering purchasing OS X10.8 Mountain Lion but decided to wait until OS X 10.9 Mavericks was issued. This was because I did not see the point in purchasing OS X 10.8 just before it was about to be superseded by a new version OS (in this case OS X 10.9); and I was unable to ascertain whether OS 10.8 would be an essential pre-requsite for OS X 10.9 or not.
I have now seen that I can upgrade (free) to OS 10.9 Mavericks – straight onto my existing OS X Lion 10.7.5. This implies that I do not need to upgrade to OS 10.8 Mountain Lion beforehand. If OS X 10.8 it is not an essential pre-requisite for OS X, it seems to me that there is no advantage gained by purchasing it.
Please can someone advise me if there is any advantage in upgrading to OS 10.8 before going on to further upgrade to OS 10.9? Does OS 10.8 have any additional features that OX 10.9 Mavericks does not have, or needs in order to be fully enabled? In short, do I need OS X10.8 beforehand to take full advantage of the OS X 10.9 upgrade?
Any advice appreciated.

Apple User7 wrote:
Please can someone advise me if there is any advantage in upgrading to OS 10.8 before going on to further upgrade to OS 10.9?
Nothing. OS X Mavericks has got the same features if you upgrade from OS X Lion instead of OS X Mountain Lion apart from the features that need a specific computer, so don't worry about it. Upgrading to Mountain Lion first would be a waste of money.
Open the Mac App Store and download OS X Mavericks. If your computer isn't supported, the Mac App Store will give you an error message. Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

What are the pre-requisites for learning OA Framework?

Hi,
Im new to oaf,can any body help on this
What are the pre-requisites for learning OA Framework?
Karthik

In order to develop any OAF Application you need to know few concepts before doing any kind of development. The concepts are basically the Business Components for Java(BC4J) components.
They are:
Application Module(AM)
Entity Object(EO)
View Object(VO)
Association Object(AO)
View Link(VL)
Now let us see the description of each component.
Application Module:
Application Modules serve as a containers for related BC4J components. The pages are related by participating in the same task. It also defines the logical data model and business methods needed.They provide the transaction context and also used for establishing database connection. AM’s can be nested to provide more complex AM’s.
Entity Object:
EO encapsulates the business logic and rules.EO’s are used for Inserting,Updating and Deleting data. This is used for validating across the applications. We can also link to other EO’s and create a Association object.
View Object:
View object encapsulates the database query. It is used for selecting data. It provides iteration over a query result set.VO’s are primarily based on Eo’s. It can be used on multiple EO’s if the UI is for update. It provides a single point of contact for getting and setting entity object values. It can be linked together to form View Links.
Association Object:
An association object is created where we link EO’s. For example take the search page where we link the same EO to form a association between the manager and employee. Every employee should have a manager associated. But if it President then no there is no manager associated. This is a perfect example to understand the AO.
View Link:
A view link is an active link between view links. A view link can be created by providing the source and destination views and source and destination attributes. There are two modes of View link operation that can be performed. A document and Master/Detail operation.
-----Let me know if you need more information
Regards
Meher Irk
Edited by: Meher Irk on Oct 23, 2010 10:45 AM

Pre Requisites for Implementing the CUE

Hi,
I have an IP Telephony set up with CME in 2 different branches.We need to implemet the AA in sites.
What are the pre requisites for hardware and license based that need to check before implementing the CUE.
one site having cisco 2911 router with Version 15.2(2)T3 and with interface ISM module is present which would like to configure for the AA.
second site having 2901 with Version 15.0(1r)M16 and with interface Embedded-Service-Engine0/0.
Attached is the Show tech support for each CME's .
Thanks in advance
Nithin Louis.

Hello
if there is no module installed you can completely ignore Embedded-Services-Engine as it won't be doing anything. Embedded Service Engine
Overview:-
Cisco Integrated Services Routers Generation 2 (Cisco ISRs G2) have dual core CPUs on the motherboard. The first core runs Cisco IOS software as Cisco Integrated Services Routers (ISRs) do; the second core, or the Embedded Service Engine, is capable of running Linux-based applications.
The following Cisco ISR G2 platforms support the Embedded Service Engine:
•Cisco 2911
•Cisco 2921
•Cisco 2951
•Cisco 3925
•Cisco 3945
Note:- As above 2901 not support embedded service engine . May be you got it on the CLI , because you run the same S/W version.Reference
https://supportforums.cisco.com/discussion/11184226/interface-embedded-service-engine00
*That is why i did not mention for Embededd service engine module supportedwith Cisco 2901, so kindly check. The above post Cisco document for compatibality.If you need to try , so try with minumum memory 1G as 2911
Memory required for 2911,2921 is 1G , 2951 is 1.5 G , 39XX is 2.5 G.My advise to you to go through ISM-SRE-300-K9 , and shut Embedded service engine .
Thanks
please rate all useful information

Pre-requisites for implementing WMS for an Existing Organization.

Dear Folks,
My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
Are there any pre-requisites to be done before implementing WMS on this organization?
Any help is highly appreciated.
Regards,
Sri

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

Pre requisites for certification

Dear All,
I would like to attend the certification test.Plz tell me what are the pre requisites for that? I came to know that S- code is mandatory for that.Plz clear my doubts
Vinay

Hi,
BRowse the website www.vue.com for more info about certification of SAP B1.
The SAP S-ID is used to register in VUE. Usually the S-ID consists of partner S-Id and customer S-Id.
Rgds,

Pre-requisites for running report for P45 RPCP45GN

Hi,
We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
Regards
Nimmi

Hi,
The following are Pre-requisites for RPCP45GN in new year legal changes:
1> The starter report RPUEFO_STARTER should be run before running the leaver report RPCP45GN.
2> Last payroll should be run for that perner.
3> The actions must performed e.g. leaver, payroll area changed, etc.
4> Infotype 65 should be correct maintained.
5> Address infotype 6 should be maintained for the perner.
Hope this could solve your problem.
Regards
Roop

Pre requisites for AIX Installation for NW2004s

Similar Messages

Maybe you are looking for