Pre-requisites for installing OBIEE 11g

Hi folks,
Can anyone post me the pre-requisites for OBIEE 11g server installation.
Regards,
Arun

Hi,
Looback adoptor (Static Ip)
JDK/jrockit 1.6.0_29 and above version bit
RCU and OBIEE 11.1.1.6.0 software
Disk Space: 20GB or more
Available Memory: 20GB or more
Temp Space: 2GB or more
Swap Space: 3GB or more
CPU: dual-core Pentium, 1.5GHz or greater
For more Refer
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

Similar Messages

Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhan

http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

ADFS2012R2 Install: Why does this need Active Directory Domain Admin Account as one of the pre requisites for installating AD FS server

Team,
We were trying to configure AD FS through ADFS Wizard on Windows 2012 R2 box as part of ADFS upgrade from ADFS 2.0 to ADFS 3.0. But the installation got stuck in between as the domain account which we were using does not have admin privileges on the AD side.
We have to raise to AD team to elevate the rights of the service accountb we are using.
Can any one please tell me why having an admin AD account is pre requisite for the AD FS configuration, what are the "Write" changes which occur at Active Directory side post ADFS installtion, we need this details to supply to AD team for the justification
purpose.
Would appreciate any detailed response on this query
thanks
Lav

Hi,
dont know all exact objects ADFS is trying to create in AD, but it needs to create some container and objects under cn=Programm Data,DC=domain,dc=com for sharing certificates.
We had troube with this because the container does'nt exists.
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Pre requisites for installing R12 on windows 2003

Hi,
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003.
And how can i solve this problem.

Hi taher;
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.RW-50004 error generic error. Can you give more details from log files?
By the way for r12 installation-requiriment please follow Hussein Sawwan's previous greatest posts:
Re: installing oracle R12 on windows 2003
Also you can check:
http://www.databasejournal.com/features/oracle/article.php/3768101/Installing-Oracle-E-Business-Suite-R12-on-Windows-2003.htm
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003. Just check log files for decide what is missing...
For loop back adapter check:
Re: Application 11i doesn't run if disconnected from network
Regard
Helios

Pre-requisites for running oracle forms 11G

What are the pre-requisits for running Oracle forms 11G?

Ok - where to begin?
From the beginning....
<blockquote>1. There are prerequisites for nearly every Oracle product. If you have not read the Installation Guide and Systems Requirements Guide you likely are missing something. Docs are [URL http://docs.oracle.com/cd/E24269_01/index.htm]here
2. If you followed the installation guide and completed the installation without error, the basic product works out of the box without any configuration changes. Don't start tweaking unless you understand the change.
3. In order to use an application server of any kind, you need to ensure it is running.
4. If you have chosen the "Development" installation type (applies to 11.1.2 only) then you will not have an HTTP Server and it is not needed. Your listener will be the WLS managed server (usually port 9001).
5. If you have chosed the "Deployment" installation type then you will have HTTP Server. You can access your Forms application via the HTTP Server Listen port (usually 8888) or the WLS_FORMS port.</blockquote>
To the issue that started this post... "+*Page cannot be displayed*+"
This error is either caused as a result of there being no listener running, specifically the HTTP Server or the wrong URL was entered in the browser, or the hostname used in the URL does not map to the correct machine where the listener is running. If you have installed and are testing on your local machine and that machine does not have a static IP address and/or a DNS registered name then fixing these issues would be a few of those "prerequisite" steps I mentioned. This is documented here:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm#BABFHBID
The above configuration needs to be completed before the installation is started.
To the next issue or change in error message: "+*Failure of server APACHE bridge: No backend server available for connection...*+"
This means that HTTP Server (specifically mod_wls) is unable to contact WLS_FORMS. This could be because WLS_FORMS is not running or because of those prereq steps noted above or a variety of other things related to not following the instructions. Refer to MyOracleSupport Note 1304095.1 for more details about this error.
Finally, as for the need for a JRE, you can do this either before you attempt to run a form or allow the autoinstall feature of the browser perform the installation. However, as Craig mentioned, you would be better off installing the latest version which is 1.6.0_33. You can change your configuration to automatically do this, but if you are new to FusionMiddleware and/or Forms doing the JRE installation manually at this point is probably a good idea. I also recommend starting with Internet Explorer because likely some config changes will be necessary to get it working.
As I mentioned, for the most part, the installation should work out of the box without changes. I would recommend getting the default form (test.fmx) running before attempting to make too many changes.
(If you chose the Deployment install type) http://youMachine:8888/forms/frmservlet?form=test
(If you chose the Development install type) http://youMachine:9001/forms/frmservlet?form=test
.

Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)

Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
     at java.util.Hashtable.containsKey(Hashtable.java:314)
     at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
     at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
     at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
     at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
     at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
     at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
Subho

My problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!!

Creating ASInstance Failed Error while Installing OBIEE 11g 11.1.1.5.0

Hi
I was trying to install OBIEE 11g 11.1.1.5.0 on a Windows Server 2003 32 Bit machine and was getting an error at 16% of Configuration Procress.
Error - Creating ASInstance Failed.
I went to see the logs. Please Help
Log :
[2011-06-09T20:17:15.609+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Created ASInstance. Calling opmn start command
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
     at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
     at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
[2011-06-09T20:17:17.218+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Exit code from OPMNAdmin : 2
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
     at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
     ... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
     at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
     at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
     ... 19 more

Hi,
The etc/hosts file needs to be changed from 127.0.0.1 host to the physical IP address before the start of the installation of 11.1.1.5.
For more information have a look at Oracle support doc id: 1333429.1
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=1333429.1
Regards,
Kalyan Chukkapalli
http://123obi.com

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

Installing obiee 11g 11.1.1.5.0 says i'm on a fat file system

after running setup.exe to install obiee 11g 11.1.1.5.0 64bit on windows 2008 R2 64bit
it asks for a middleware home
when I fill out the fields and click next, it gives:
WARINING: Fat file system
Middleware home location is in a FAT file system..
but its not the drive is NTFS..
I even deleted the partition, recreated it and formatted..
still get the warning..

you can ignore the error and proceed, its documented in 11.1.1.6.0 release notes -
http://docs.oracle.com/cd/E23943_01/doc.1111/e14774/biee.htm#CHDJDHGI
41.5.12 Ignore FAT File System Error Message When Performing an Enterprise Installation
Impacted Releases: 11.1.1.6
When performing an Enterprise Installation, under certain circumstances, you might see the error message "Middleware Home Location is in FAT file system". This message can occur when you install on an NTFS file system. You can click Yes to safely proceed with the installation.

System requirments to install obiee 11g

Hi everyone,
i want to install obiee 11g in my desktop and my system configuration is
2.4 GHz intel core to duo
ram 4gb
windows 7 ultimate

Hi,
Refer the below links .
http://satyaobieesolutions.blogspot.in/2012/06/software-system-requirement-for-obiee.html
http://satyaobieesolutions.blogspot.in/2012/06/hardware-and-software-system.html
Disk Space: 20GB or more
Available Memory: 4GB or more
Temp Space: 950MB or more
Swap Space: 3GB or more
CPU: dual-core Pentium, 1.5GHz or greater
Hope this help's,
Thanks,
Satya

Can I install OBIEE 11g and Database 11g on the same machine?

Hi experts
i have some confusion...
i have oracle database 11g on one of my server.
i want to install OBIEE 11g on that same machine...
i just want to be assure that will it cause any problem or conflict..
because i set ORACLE_HOMe=/home/oracle/app/oracle/product/11.2.0/dbhome_1
and i have to set ORACLE_HOME for OBIEE also....
Please let me know what how to give...and is there any other way
Thanks
Abhishek Anand

Hi Abhishek,
You can install or mount both DB and OBIEE on same machine, but check out the disk space and memory needed should be more to accomodate both.
Cheers,
KK

Getting error while installing OBIEE 11g

Hello,
I am trying to install OBIEE 11g to my machine.I created the schema and all.
at the end got this error at the installation progress step.
The status bar shows 46% .
Installation Failed. OUI Session failed invalid entry CRC (expected 0xa8bed9c4 but got 0x87bc0dd6).
What to do now?
Thanks

Hi,
Deinstalled & clean your registry and delete the obiee folders from the drive and follow the below steps,
Reference link: Courtsey to Atulkumar.
http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
or
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar) (Find the Steps : and Specify the installation Drive)
- installed OBI as "software only" (hesr follow as per Viktor Kibsgaard said) (*Here also Specify the same installation Drive*)
- configured OBI (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
Steps : You can find the generic jar here:
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You may install this by a command like this : java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
Reference link: Courtsey to Atulkumar.
http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
Hope this works for you too.

Installing OBIEE 11g on OEL 5u5 64 bit : invalid entry CRC

I am trying to install OBIEE 111130 64 on a Virtual Box with OEL 5 update 5 64 bit but I cannot get past an "invalid entry CRC" error.
I managed to get the RCU running. I managed to get the Weblogic running as a separate install using the Sun JDK 64 bit. But the OBIEE Software Only install keeps running in the "invalid entry CRC" error (as does any other type of install available).
I tried downloads from OTN and eDelivery, but both sites seem to give me faulty downloads that fail with this error (though cksum says all is well).
I tried default unarchive tool in OEL5 as well as the Oracle 'recommended' tool from eDelivery to see if that made any difference but that did not help.
I tried unarchive tool as well as Stuffit on Apple host but that also did not make any difference.
Has anyone ever had this problem and found a (repeatable) solution, or does really know how to get past this ?
Has anyone ever installed OBIEE 111130 64 on OEL 5u5 64 bit, by the way ? Does Oracle support it (I could not find a clear answer).

Well, I found the solution.
First of all : download from eDelivery using a cable connection (and not a wireless connection) for optimal stability of your download.
Then : run the MD5 and SHA-1 checks to see if you really got what you wanted.
Then, in Virtualbox for the Oracle Enterprise Linux 5u5 64bit guest OS : set its memory to 2Gb MAX !!!
I noticed that I kept running into memory allocation problems (no more CRC's now, hurray!) that said that the host was out of memory. That surprised me because I have 8Gb onboard and the Virtualbox was set to use only 3584MB (also strange, Virtualbox does not allow for more ...). But that was too much apparently because ALL my memory was consumed somehow.
Then start your Virtualbox not via the window application but by using the following commandline:
Virtualbox -startvm <yourboxname>
This way you get messages on the commandline you would otherwise not see.
By the way, I run Virtualbox on a Mac Book Pro with 8 Gb or RAM.
And then in your Virtual machine unpack your freshly downloaded zips using one of the unzippers 'recommended' by Oracle (see the last lines of the eDelivery page).
After setting all this the Software Only installation of OBIEE 11g went well, but ... I had to run the installer with an extra parameter that I only discovered after studying the .sh script:
*./runInStaller -jreloc <java-64bit-home-dir>*
This -jreloc parameter points to the home directory where I installed (as root) my Sun Java 64bit JDK. In this way I ensured that my installation process uses the proper JVM.
The parameter is not documented (as far as I can see) but can be found in the runInstaller script. So I tried it and it worked like a charm.
When I did some more investigation I found out that Virtualbox (as well as VMWare Fusion) on the Mac are 32bit applications that might run 64bit guests, but always with restrictions somewhere as is seems. Now VMWare Fusion allows for more than 3.5Gb of memory to allocate to a VM, but I have not tried that yet (but I will soon).
Nevertheless, be it the Mac that messes up memory allocation to a 32bit app or be it Virtualbox that messes with memory, the lesson learned is to be cautious with large amounts of memory in Virtualbox. At least I can continue installing OBIEE 11g and make my customer happy.
Zoef zoef.

Fail installing OBIEE 11g on Oracle Linux 5 64 bits

Hello,
I am trying to install OBIEE 11g over Oracle Linux 5 (64 bits), but I can't. I have the following issue:
INST-07008: Validation of Oracle Home location failed. User does not have permission to create home/instance location
INST-07282: Specified Middleware home location does not exist
In the Oracle Middleware Home, I have specified "/root/Oracle/Middleware".
I have following these steps:
1) Install Oracle DB 11g R2 (OK)
2) Install jdk for Linux 64 bits (OK)
3) Install weblogic
I have done the installation as "root" user
Middleware Home Directory = /root/oracle/Middleware (OK)
4) Install RCU as root (OK)
5) Install OBI 11g
To execute ./runInstaller it is necessary be as oracle user.
I have changed permissions in /root/Oracle/Middleware (chmod 777), but the issue is the same.
I appreciate any idea to solve the issue.
Thank you in advance.
Regards,
Monica.

Hello,
no, I have installed OBIEE as oracle user with software only option, with root isn't possible.
So, I don't know if it is necessary I installed WebLogic as oracle user to have permission in middleware path...
Regards.

Pre-requisites for installing OBIEE 11g

Similar Messages

Maybe you are looking for