Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhan

http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH

Similar Messages

Pre-requisites for running oracle forms 11G

What are the pre-requisits for running Oracle forms 11G?

Ok - where to begin?
From the beginning....
<blockquote>1. There are prerequisites for nearly every Oracle product. If you have not read the Installation Guide and Systems Requirements Guide you likely are missing something. Docs are [URL http://docs.oracle.com/cd/E24269_01/index.htm]here
2. If you followed the installation guide and completed the installation without error, the basic product works out of the box without any configuration changes. Don't start tweaking unless you understand the change.
3. In order to use an application server of any kind, you need to ensure it is running.
4. If you have chosen the "Development" installation type (applies to 11.1.2 only) then you will not have an HTTP Server and it is not needed. Your listener will be the WLS managed server (usually port 9001).
5. If you have chosed the "Deployment" installation type then you will have HTTP Server. You can access your Forms application via the HTTP Server Listen port (usually 8888) or the WLS_FORMS port.</blockquote>
To the issue that started this post... "+*Page cannot be displayed*+"
This error is either caused as a result of there being no listener running, specifically the HTTP Server or the wrong URL was entered in the browser, or the hostname used in the URL does not map to the correct machine where the listener is running. If you have installed and are testing on your local machine and that machine does not have a static IP address and/or a DNS registered name then fixing these issues would be a few of those "prerequisite" steps I mentioned. This is documented here:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm#BABFHBID
The above configuration needs to be completed before the installation is started.
To the next issue or change in error message: "+*Failure of server APACHE bridge: No backend server available for connection...*+"
This means that HTTP Server (specifically mod_wls) is unable to contact WLS_FORMS. This could be because WLS_FORMS is not running or because of those prereq steps noted above or a variety of other things related to not following the instructions. Refer to MyOracleSupport Note 1304095.1 for more details about this error.
Finally, as for the need for a JRE, you can do this either before you attempt to run a form or allow the autoinstall feature of the browser perform the installation. However, as Craig mentioned, you would be better off installing the latest version which is 1.6.0_33. You can change your configuration to automatically do this, but if you are new to FusionMiddleware and/or Forms doing the JRE installation manually at this point is probably a good idea. I also recommend starting with Internet Explorer because likely some config changes will be necessary to get it working.
As I mentioned, for the most part, the installation should work out of the box without changes. I would recommend getting the default form (test.fmx) running before attempting to make too many changes.
(If you chose the Deployment install type) http://youMachine:8888/forms/frmservlet?form=test
(If you chose the Development install type) http://youMachine:9001/forms/frmservlet?form=test
.

Pre installers for installing Oracle Utilities Application Framework V4.0.2

is there any pre installers for installing Oracle Utilities Application Framework V4.0.2 for Meter Data Management V2.0.0 Multiplatform??
reply me asap.
regards
vijaya

It would help if you provided osme basic information like what version you are installing, what operating system, 32 bit or 64 bit. We may like to help but we are not mind readers.
If you happen to be installing one of the latest versions of the framework (CC&B FW 2.2 SP 8) there is an issue.
You may have to start off with hibernate 3.2.5 then run the framework installation.
This may not do a full install but you may find that only 1 or patches have not been installed and the issue is that these require hibernate 3.2.7
So go back and install the hibernate 3.2.7 and change the environment variables to point to the new version.
Re-run the framework installer.
You may get errors in that the patches that did not previously install properly cannot be installed.
This is because they have entries in the etc/installed_fixes.txt file.
edit the etc/installed_fixes.txt file and delete the patches that will not install.
re-run the installer now and the rest of the patches should now install
The 2 offending patches may be 9384543 and 9080333.

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Unable to Install Oracle 9i on redhat linux 9

Hi everybody,
I had been trying to install Oracle 9i on redhat linux 9 since last month and I am not able to succeed in installing the same. In fact I do not get to see even the OUI screen . I give below the steps I followed.
1) Setting of env varibles pertinent to oracle., say ORACLE_HOME,NLS_LANG etc.
2) PATH=$PATH:/usr/local/jdk1.3.1/bin:.
3) export LD_ASSUME_KERNEL=2.4.1
I have a set of 3 CD's for installation. As soon as I load the first CD. the runInstaller would run for sometime and stop, while I do the installation in the graphic mode.
When I try to install the same in the command line mode, I get to see something like the one below
Initializing java jre from /tmp/OraInstall0/... please wait.. and then it would come back to the command prompt.
I then invoke ps -ef | grep -i oracle to check if some process is running and I do get to see something. But ultimately nothing happens.
Please help me with this.

At Oracle Site we have a very good manual for 9i installation. Follow the manual step-by-step.
Your problem seems as a java or permissions issue.
good luck
Eduardo

Error in Installing Oracle 9i on RedHat LINUX 8.0

When I am trying to install Oracle 9i on RedHat LINUX 8.0 I am getting the Error message " CANNOT COPY INTO THE FILE aurora.zip". I just ignored this and i continued the Installation. But after some time (During installation in LINKING part) i am getting the error message ERROR IN INVOKING TARGET ctx_on OF MAKEFILE /u01/app/oracle/product/9.2.0/rdbms/lib/ins_rdbms.mk
What shall i do for this?

are u sure that u can load Oracle 9i on Linux 8.0? i am aware that the three Linux distributions certified for Oracle 10g are:
Red Hat Enterprise Linux 2.1
Red Hat Enterprise Linux 3
Novell SUSE Linux Enterprise Server 8

Configuration needed for Installing Oracle 9i-R2 on Linux Itanium

I need a specific documentation for Installing Oracle 9i-R2 on Linux Itanium server.

Oracle does not support running the 32-bit database on Itanium.64-bit Oracle database software only supports 64-bit for Itanium.
Check Metalink Note:266043.1 for details
Virag

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Pre-requisites for installing OBIEE 11g

Hi folks,
Can anyone post me the pre-requisites for OBIEE 11g server installation.
Regards,
Arun

Hi,
Looback adoptor (Static Ip)
JDK/jrockit 1.6.0_29 and above version bit
RCU and OBIEE 11.1.1.6.0 software
Disk Space: 20GB or more
Available Memory: 20GB or more
Temp Space: 2GB or more
Swap Space: 3GB or more
CPU: dual-core Pentium, 1.5GHz or greater
For more Refer
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

Pre requisites for installing R12 on windows 2003

Hi,
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003.
And how can i solve this problem.

Hi taher;
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.RW-50004 error generic error. Can you give more details from log files?
By the way for r12 installation-requiriment please follow Hussein Sawwan's previous greatest posts:
Re: installing oracle R12 on windows 2003
Also you can check:
http://www.databasejournal.com/features/oracle/article.php/3768101/Installing-Oracle-E-Business-Suite-R12-on-Windows-2003.htm
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003. Just check log files for decide what is missing...
For loop back adapter check:
Re: Application 11i doesn't run if disconnected from network
Regard
Helios

ADFS2012R2 Install: Why does this need Active Directory Domain Admin Account as one of the pre requisites for installating AD FS server

Team,
We were trying to configure AD FS through ADFS Wizard on Windows 2012 R2 box as part of ADFS upgrade from ADFS 2.0 to ADFS 3.0. But the installation got stuck in between as the domain account which we were using does not have admin privileges on the AD side.
We have to raise to AD team to elevate the rights of the service accountb we are using.
Can any one please tell me why having an admin AD account is pre requisite for the AD FS configuration, what are the "Write" changes which occur at Active Directory side post ADFS installtion, we need this details to supply to AD team for the justification
purpose.
Would appreciate any detailed response on this query
thanks
Lav

Hi,
dont know all exact objects ADFS is trying to create in AD, but it needs to create some container and objects under cn=Programm Data,DC=domain,dc=com for sharing certificates.
We had troube with this because the container does'nt exists.
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?

According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?

Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported.

Installing oracle 9i on redhat linux 7.3

When i am installing oracle enterprise database i get the following error message -
"Not have enough space to write to /tmp/OraInstall/temp8. Please create more space
at this location and try again".
I have been facing this issue for the last week. Please help.

If you have free space on your hard drive or if you have another hard drive on your system where you have
free space, you can create a linux partition on that free space and then mount that partition onto your
/tmp directory. What this will mean then is that whatever you create/write into the /tmp directory, will
actually go into your newly created partition (which will have more space, thus solving your space problem).

When I install Oracle 9i on RedHat Linux 7.3 ...

Hello , everybody :
When I install Oracle 9i (9.2.0.1) on Red Hat Linux 7.3 ,
I got an error when invoking the target of "install" in makefile : "ins_ctx.mk" ,
all of the message is "Error in invoking target install of makefile /oracle/product/9.2.0/ctx/lib/ins_ctx.mk"
and I edit the file "$ORACLE_HOME/ctx/lib/env_ctx.mk " , add a "$(LDLIBFLAG)dl" to the "INSO_LINK" ,
but there is still an error when I press "Retry" and "Retry" ...
Will it occur any error when I use Oracle 9i on Linux (because I press "Ignore") ?
Does somebody can tell me how to solve the problem ?
Thanks a lot.

Hi Lai Yu-Tai,
I'd the same problem. You can fix the problem (fixing provided by Werner Puschitz, http://www.puschitz.com/OracleOnLinux.shtml):
"Error in invoking target install of makefile /opt/oracle/product/9.2.0/ctx/lib/ins_ctx.mk"
I saw this error only in connection with Oracle 9i R2 (9.2.0) installation.
Also, this is the only problem I experienced with Oracle 9i R2 on Red Hat 8.0 (and 7.3 -MQ). But this does not necessarily mean that you won't see other problems described here.
The following errors showed up in $ORACLE_HOME/install/make.log:
/lib/libdl.so.2: undefined reference to `_dl_addr@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_open@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_close@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_sym@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_vsym@GLIBC_PRIVATE'
It happens when the following step is executed:
/usr/bin/make -f ins_ctx.mk install ORACLE_HOME=/opt/oracle/product/9.2.0
Edit $ORACLE_HOME/ctx/lib/env_ctx.mk and go to "INSO_LINK =", add a "$(LDLIBFLAG)dl" to the line and save it.
Here is the full line with the added "$(LDLIBFLAG)dl" flag:
INSO_LINK = -L$(CTXLIB) $(LDLIBFLAG)m $(LDLIBFLAG)dl $(Long postings are being truncated to ~1 kB at this time.

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Similar Messages

Maybe you are looking for