Pre Requisites to install bex7

Hi Experts
Can any body tell wat are Pre Requisites to install bex 7
its verry urgent.
can any body tell the sap notes.
Regards
Anand

If it's Sapgui 7.10 you're going to use, you should also check OSS-note 1121263 (contains an MS Office bugfix).
.NET framework 2.0 is also required in that case.

Similar Messages

Pre requisites to install BI support package 18

Hi,
We have nw 2004s system.
I would like to know how do we check the pre requisites to install BI support package 18 .
Regards,
Rakesh

Do I have to check under SAP support packages->SAP support package stacks-->SAP netweaver ??
Thanks,
Rakesh

Pre-requisites for installing Oracle 10gR3 on RedHat Linux

Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhan

http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Failing PATH pre-requisite check installing 11g client

Greetings -
I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Details:
- PRVF-3919 : Failed to retrieve value of environment variable "PATH"
- Cause: Environment variable value could not be determined.
- Action: Check user equivalence and whether the user has administrative privileges on the node.
Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
C:\>path
PATH=C:\Windows\system32;C:\Windows;
And the installer still fails.
I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
D:\app\ladams\product\11.2.0\client_1
where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
Interestingly, if I open the installer log, I can find this line in it near the top:
INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
Later on in the log file, I see this:
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
Any help would be appreciated.

Thanks for the reply.
I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
"Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
Is there another section of the fine manual I should take a look at?
Edited by: 984635 on Jan 28, 2013 6:09 PM
Edited by: 984635 on Jan 28, 2013 6:17 PM

Pre-requisites for installing OBIEE 11g

Hi folks,
Can anyone post me the pre-requisites for OBIEE 11g server installation.
Regards,
Arun

Hi,
Looback adoptor (Static Ip)
JDK/jrockit 1.6.0_29 and above version bit
RCU and OBIEE 11.1.1.6.0 software
Disk Space: 20GB or more
Available Memory: 20GB or more
Temp Space: 2GB or more
Swap Space: 3GB or more
CPU: dual-core Pentium, 1.5GHz or greater
For more Refer
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

ADFS2012R2 Install: Why does this need Active Directory Domain Admin Account as one of the pre requisites for installating AD FS server

Team,
We were trying to configure AD FS through ADFS Wizard on Windows 2012 R2 box as part of ADFS upgrade from ADFS 2.0 to ADFS 3.0. But the installation got stuck in between as the domain account which we were using does not have admin privileges on the AD side.
We have to raise to AD team to elevate the rights of the service accountb we are using.
Can any one please tell me why having an admin AD account is pre requisite for the AD FS configuration, what are the "Write" changes which occur at Active Directory side post ADFS installtion, we need this details to supply to AD team for the justification
purpose.
Would appreciate any detailed response on this query
thanks
Lav

Hi,
dont know all exact objects ADFS is trying to create in AD, but it needs to create some container and objects under cn=Programm Data,DC=domain,dc=com for sharing certificates.
We had troube with this because the container does'nt exists.
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Pre requisites for installing R12 on windows 2003

Hi,
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003.
And how can i solve this problem.

Hi taher;
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.RW-50004 error generic error. Can you give more details from log files?
By the way for r12 installation-requiriment please follow Hussein Sawwan's previous greatest posts:
Re: installing oracle R12 on windows 2003
Also you can check:
http://www.databasejournal.com/features/oracle/article.php/3768101/Installing-Oracle-E-Business-Suite-R12-on-Windows-2003.htm
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003. Just check log files for decide what is missing...
For loop back adapter check:
Re: Application 11i doesn't run if disconnected from network
Regard
Helios

What are the Pre-requisites in installing NWDI

Hi Experts,
I would like to ask if you have a list of all requirements when installing NWDI.
Thanks,
Edy

Hi,
no need to do anything with NWDI if you have already one. Or if you are about to install a new one, it can be any version (general recommendation, the higher the better, but if it is say 730 for instance, it'll be able to serve any developments, let it be 700, 710 ... 740, etc. If it is 700 higher than SP13 then again, you'll be able to develop/deploy for any releases. Just make sure it is not lower than SP13 if you intend to use 700 NWDI. If you use higher release than 700 then it does not matter).
I am sure you'll love this blog:
NWDI vs. NWDI content
Cheers,
Ervin

Checking Pre requisite before installing software

Hi,
I am new to Windows policy settings.
The scenario is as follows:
I need a valid user to be able to install a software# 2, only if he has software# 1 installed on the same machine.
How can i achieve this restriction.
Any suggestions are appreciated.
Thanks.
Ankur
AV

this isn't an app compatibility problem.
Ask in a forum devoted to your current installation technology. If you use Visual Studio setup projects, visit
the setup project forum.
Visual C++ MVP

Pre-requisite for Developer Studio

I'm a newbie on Developer Studio.
What are the pre-requisites to install this s/w?
Is there an install guide I can go through?
Any pointers would be extremely appreciated.
Regards,
Maulik

Hi
Try to look into this link.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads</a>
Hope u can download the studio. If you want to look at the installationi guide look inthe SAP marketplace.
Regards,
Shailaja

Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisS

I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better.

Swap Space error in pre requisite check of NWDS2004(Support Pack18)install

Hi,
Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
==============================================
Condition:- Swap Size
Result Code:- Condition not met
Severity:- HIGH
Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
=============================================
Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.

Hi Gandhi,
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
regards
Juan
Please reward with points if helpful

Error installing Service Provider Foundation- pre-requisite for configuring Windows Azure Pack

We are trying to setup lab at our premises to get hands on with WAP and explore.
We are able to install all the pre-requisite software’s except the "Service Provider Foundation (SPF)" component. Using SPF we are trying to configure the WAP that is installed successfully.
Software installed on Target machine-
Win Server 2012 OS.
Server roles enabled on host-Hyper-V,IIS, WSUS, File and storage services.
SQl Server W2k12-sp1-Standard edition in mixed authentication mode.
SCVMM.
WAP.
Issue description:-
We try to run the 'Orchestatorsetup.exe' with both Local admin/domain admin account. Pre-requisite check during the installation of SPF is successful.
When we select "Install” button, Setup.exe is getting terminated halfway through abruptly.
We tried to analyze the attached error log file extract.
[061C:0F60][2014-12-02T12:30:03.146+05:30]: Applying package: Id.Setup.msi, action: Install, path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\Microsoft.SystemCenter.Foundation.Setup.msi, arguments: ' INSTALLLOCATION="C:\inetpub"
SCVMMCHECKED="1" SCDPMCHECKED="0" SCOMCHECKED="0" SCSMCHECKED="0" WEBSITE_NAME="SPF" PORT_NUMBER="8090" SPECIFY_CERTIFICATE="0" CERTIFICATE_STORE="My" CERTIFICATE_SERIAL="1714309174975BA5442B9ADF17FB6657"
USE_SSL="1" SCVMM_APPPOOL_NAME="VMM" SCVMM_DIRECTORY_NAME="VMM" SCVMM_USERNAME_VALUE="NETWORK SERVICE" SCVMM_DOMAIN_VALUE="NT AUTHORITY" SCVMM_PASSWORD_VALUE="" SCADMIN_APPPOOL_NAME="Admin"
SCADMIN_DIRECTORY_NAME="Admin" SCADMIN_USERNAME_VALUE="NETWORK SERVICE" SCADMIN_DOMAIN_VALUE="NT AUTHORITY" SCADMIN_PASSWORD_VALUE="" SCPROVIDER_APPPOOL_NAME="Provider" SCPROVIDER_DIRECTORY_NAME="Provider"
SCPROVIDER_USERNAME_VALUE="NETWORK SERVICE" SCPROVIDER_DOMAIN_VALUE="NT AUTHORITY" SCPROVIDER_PASSWORD_VALUE="" SCUSAGE_APPPOOL_NAME="Usage" SCUSAGE_DIRECTORY_NAME="Usage" SCUSAGE_USERNAME_VALUE="NETWORK
SERVICE" SCUSAGE_DOMAIN_VALUE="NT AUTHORITY" SCUSAGE_PASSWORD_VALUE="" SCDPM_APPPOOL_NAME="DPM" SCDPM_DIRECTORY_NAME="DPM" SCDPM_USERNAME_VALUE="NETWORK SERVICE" SCDPM_DOMAIN_VALUE="NT AUTHORITY"
SCDPM_PASSWORD_VALUE="" DATABASE_SERVER="localhost" DATABASE_PORT="1433" DATABASE_EXISTS="False" DATABASE_NAME="SCSPFDB" DPM_SECURITYGROUPUSERS="WAPLABS\vmmadmin" VMM_SECURITYGROUPUSERS="WAPLABS\vmmadmin"
ADMIN_SECURITYGROUPUSERS="WAPLABS\vmmadmin" PROVIDER_SECURITYGROUPUSERS="WAPLABS\vmmadmin" USAGE_SECURITYGROUPUSERS="WAPLABS\vmmadmin" ARPSYSTEMCOMPONENT ="1"'
[061C:0F60][2014-12-02T12:30:24.948+05:30]: Error 0x80070643: Failed to install MSI package.
[061C:0F60][2014-12-02T12:30:24.949+05:30]: Error 0x80070643: Failed to execute MSI package.
[18C0:17D4][2014-12-02T12:30:24.950+05:30]: Error 0x80070643: Failed to configure per-machine MSI package.
[18C0:17D4][2014-12-02T12:30:24.952+05:30]: Error 0x80070643: Failed to execute MSI package.
[061C:0F60][2014-12-02T12:30:24.952+05:30]: Removing cached package: {69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0, from path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\
[18C0:17D4][2014-12-02T12:30:24.957+05:30]: EverestBootstrapperApplication_ExecuteComplete
[18C0:17D4][2014-12-02T12:30:24.958+05:30]: MSI execution completed
[18C0:17D4][2014-12-02T12:30:24.963+05:30]: Installation finished
Workaround tried:-
1. As per the TechNet MS site changing the time zone to Pacific/London time zone. Tried it but issue persists.
2. Tried to run the setup.exe using domain account and local admin account.
Any help appreciated much..

UAC was turned off and installation was tried using local admin account. The error log suggested it was failing to create a firewall exception rule for 8090/UDP port. Windows Firewall service was enabled. SPF got installed successfully.
Thanks Darryl for helping us break the deadlock :)

10gR2 Install Issue: "No pre-requisite checks found in oraparam.ini"

Hello there
I have recently created a virtual machine under VMWare 5 with a base Windows 2000 build on it.
When I try and load the OUI for the 10gR2 install, the command box just tells:
"No pre-requisite checks found in oraparam.ini"
The OUI then proceeds to install the database.
Why am I getting this warnig? The reason I ask is that I can't install the Companion CD becasue of this. The universal installer does not work for CD2!!!
Any help much appreciated
Duncan

"No pre-requisite checks found in oraparam.ini"That is normal. For the operating system you are installing it on, there are no predefined pre-requisite steps that installer needs to verify (like libraries required, versions of components, software tools required etc).

Pre Requisites to install bex7

Similar Messages

Maybe you are looking for