Pre-requisites
HI pals,
Please send me the <b>Pre-requisites</b> for a company for SAP XI certification.
Think if a company is having a product (a software product)and has to integrate with SAP system...so before that what are the <b>pre-requisites for SAP XI certification of that company</b>
Please do inform me..
Regards
Anil
Anil,
if you got you right their no need of cerification for thrid part porducts to intergate with SAP sytem. you can dirtecly intergate with SAP XI.
Similar Messages
-
Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64
Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
ManishStarted with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish -
Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2
I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisSI voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better. -
Swap Space error in pre requisite check of NWDS2004(Support Pack18)install
Hi,
Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
==============================================
Condition:- Swap Size
Result Code:- Condition not met
Severity:- HIGH
Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
=============================================
Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.Hi Gandhi,
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
regards
Juan
Please reward with points if helpful -
What are the System pre-requisite for the BODS installation(SAP Data services)
I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.
Hi Siddhu,
Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
Tutorial: How to install SAP Data Services 4.2 - Part 1
Regards
Arun Sasi -
Pre-requisites and steps for uploading chart of accounts in sap r/3
Hi,
I am a fresher in SAP FI. I have a completly new set of Chart of Accounts which i need to upload in the system. How do i do it and are there any pre-requisites for the same i.e variants to be defined and assigned completly before uploading the Chart of Accounts.
I have heard of LSMW , but then how do i use it can anybody help me on the same.
Thanks
PoornimaHi,
Yes, you need to define first the chart of account name and it should be assigned to the company code in OBY6.
Please refer below thread:-
[Upload Chart Of Accounts - Indian Localisation;
Regards,
Gaurav -
Oracle Universal Installer not starting, failing on pre-requisites
--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
ThanksThanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though? -
Error installing Service Provider Foundation- pre-requisite for configuring Windows Azure Pack
We are trying to setup lab at our premises to get hands on with WAP and explore.
We are able to install all the pre-requisite software’s except the "Service Provider Foundation (SPF)" component. Using SPF we are trying to configure the WAP that is installed successfully.
Software installed on Target machine-
Win Server 2012 OS.
Server roles enabled on host-Hyper-V,IIS, WSUS, File and storage services.
SQl Server W2k12-sp1-Standard edition in mixed authentication mode.
SCVMM.
WAP.
Issue description:-
We try to run the 'Orchestatorsetup.exe' with both Local admin/domain admin account. Pre-requisite check during the installation of SPF is successful.
When we select "Install” button, Setup.exe is getting terminated halfway through abruptly.
We tried to analyze the attached error log file extract.
[061C:0F60][2014-12-02T12:30:03.146+05:30]: Applying package: Id.Setup.msi, action: Install, path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\Microsoft.SystemCenter.Foundation.Setup.msi, arguments: ' INSTALLLOCATION="C:\inetpub"
SCVMMCHECKED="1" SCDPMCHECKED="0" SCOMCHECKED="0" SCSMCHECKED="0" WEBSITE_NAME="SPF" PORT_NUMBER="8090" SPECIFY_CERTIFICATE="0" CERTIFICATE_STORE="My" CERTIFICATE_SERIAL="1714309174975BA5442B9ADF17FB6657"
USE_SSL="1" SCVMM_APPPOOL_NAME="VMM" SCVMM_DIRECTORY_NAME="VMM" SCVMM_USERNAME_VALUE="NETWORK SERVICE" SCVMM_DOMAIN_VALUE="NT AUTHORITY" SCVMM_PASSWORD_VALUE="" SCADMIN_APPPOOL_NAME="Admin"
SCADMIN_DIRECTORY_NAME="Admin" SCADMIN_USERNAME_VALUE="NETWORK SERVICE" SCADMIN_DOMAIN_VALUE="NT AUTHORITY" SCADMIN_PASSWORD_VALUE="" SCPROVIDER_APPPOOL_NAME="Provider" SCPROVIDER_DIRECTORY_NAME="Provider"
SCPROVIDER_USERNAME_VALUE="NETWORK SERVICE" SCPROVIDER_DOMAIN_VALUE="NT AUTHORITY" SCPROVIDER_PASSWORD_VALUE="" SCUSAGE_APPPOOL_NAME="Usage" SCUSAGE_DIRECTORY_NAME="Usage" SCUSAGE_USERNAME_VALUE="NETWORK
SERVICE" SCUSAGE_DOMAIN_VALUE="NT AUTHORITY" SCUSAGE_PASSWORD_VALUE="" SCDPM_APPPOOL_NAME="DPM" SCDPM_DIRECTORY_NAME="DPM" SCDPM_USERNAME_VALUE="NETWORK SERVICE" SCDPM_DOMAIN_VALUE="NT AUTHORITY"
SCDPM_PASSWORD_VALUE="" DATABASE_SERVER="localhost" DATABASE_PORT="1433" DATABASE_EXISTS="False" DATABASE_NAME="SCSPFDB" DPM_SECURITYGROUPUSERS="WAPLABS\vmmadmin" VMM_SECURITYGROUPUSERS="WAPLABS\vmmadmin"
ADMIN_SECURITYGROUPUSERS="WAPLABS\vmmadmin" PROVIDER_SECURITYGROUPUSERS="WAPLABS\vmmadmin" USAGE_SECURITYGROUPUSERS="WAPLABS\vmmadmin" ARPSYSTEMCOMPONENT ="1"'
[061C:0F60][2014-12-02T12:30:24.948+05:30]: Error 0x80070643: Failed to install MSI package.
[061C:0F60][2014-12-02T12:30:24.949+05:30]: Error 0x80070643: Failed to execute MSI package.
[18C0:17D4][2014-12-02T12:30:24.950+05:30]: Error 0x80070643: Failed to configure per-machine MSI package.
[18C0:17D4][2014-12-02T12:30:24.952+05:30]: Error 0x80070643: Failed to execute MSI package.
[061C:0F60][2014-12-02T12:30:24.952+05:30]: Removing cached package: {69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0, from path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\
[18C0:17D4][2014-12-02T12:30:24.957+05:30]: EverestBootstrapperApplication_ExecuteComplete
[18C0:17D4][2014-12-02T12:30:24.958+05:30]: MSI execution completed
[18C0:17D4][2014-12-02T12:30:24.963+05:30]: Installation finished
Workaround tried:-
1. As per the TechNet MS site changing the time zone to Pacific/London time zone. Tried it but issue persists.
2. Tried to run the setup.exe using domain account and local admin account.
Any help appreciated much..UAC was turned off and installation was tried using local admin account. The error log suggested it was failing to create a firewall exception rule for 8090/UDP port. Windows Firewall service was enabled. SPF got installed successfully.
Thanks Darryl for helping us break the deadlock :) -
Hi All,Pre-requisite of using FOR ALL ENTRIES
Hi All,
What are the Pre-requisite of using FOR ALL ENTRIES in the select statement .pls its Urgent .
thanks®ards.
Bharathi,
For using for all entries in below statement for all entries in itab_mara it will retrieve record corresponding fields of table itab_marc.
In this case if we have duplicate records in mara .For that also it will retrieve the value in itab_marc.
select matnr erdat from table itab_mara where matnr in s_matnr.
if not itab_mara is initial.
select matnr werks from table itab_marc for all entries of table itab_mara
where werks in s_werks and
matnr in s_matnr.
Reward with points if helpful. -
Pre-requisites for installing Oracle 10gR3 on RedHat Linux
Hi All,
I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
Could someone please let me know where I can find this info?
Thanks,
Madhanhttp://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
HTH -
Reporting Financials - Pre requisites
Hi Experts!
I was looking at 'SAP Help' for Reporting Financials (EhP3).
http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
It says that for using these (0FI_GL_40....) new data sources the pre requisites are:
1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
2. Activated the Reporting Financials business function
I am clear about point number 1. But I am not sure about point 2 (what it refers to).. Any Ideas?
With Best Regards
S MuruganHi Oscar,
Thanks for the update. I want to see whether this feature has been activated in a particular client before talking to their FI team. I am looking for step by step information to see whether this has been actiavted in the client environment.
Pls see if u can provide more information.
With Best Regards
S Murugan -
Migration pre-requisites for GR\IR clearing..
Hi All,
My client wants to migrate the data in production after upgrading the EHP5, the pre-requisites to data migration GR\IR ACCOUNT SHOULD BE ZERO.
In production they have open Purchase orders, its not possible to close the Pos.
I am thinking to pass a JV against the GR\IR (F-02) and clear open items in the account (f-03)
After upgrade I reverse and reset the document (which was generated in f-03
Please suggest me to any alternative way to meet the requirement.In case of migration , if there are opne GR then only GR / IR would come in to pictiure .
Open Po's dont have an impact on GR/IR account for migrating PO.
Are there any opne or uncleared GR ? if yes then you will have GR/IR account into picture .
Elaborate your question to comment further .
Cheers ,
Dewang -
Dear All,
The pre requisite checker run for SAP ECC6 installation on Solaris 10/Oracle using zones gives following errors:
1) Environment variable CPIC_MAX_CONV should be set and the value should be at least 200
I've done this on windows. Used "set env CPIC_MAX_CONV=200" on Solaris. SAPInst does not recognize this.
2) It is recommended to add the entry 'set rlim_fd_cur=8192' to /etc/system. Current value: not available. See also SAP Note 395438. Note that this is checked only for an entry in /etc/system. The value found might not be the effective one. (Updated 2005-06-24)
I've already made entry in /etc/system but again it is not recognized.
Any suggestions please.
regards, SeanThe correct command should be : setenv CPIC_MAX_CONV=200
In csh this should be: setenv CPIC_MAX_CONV 200
..without '='
In bash a simple: export VAR=<value>
..will do.
Permanent variables for SAP environments are usually stored in .sapenv* files in home of <SID>adm
Nelis
Edit: By the way that note 395438 refers to parameter settings for Solaris 9 and below. You will want to look at [Note 724713 - parameter settings for Solaris 10|https://service.sap.com/sap/support/notes/724713] rather. Note the "Please do not use any old /etc/system settings from SAP note 395438 with Solaris 10".
Edited by: Nelis Lamprecht on Jun 26, 2008 3:46 PM -
Pre-requisite of Electronic BRS
Hi,
My client's requirement is to use electronic bank statement. For this I need to configure the steps as mentioned in SPRO for electronic bank statement.
I went through the posts in SDN forum. But i want to know the pre-requisites (like interface required for Electronic BRS, Multicash format from banks, etc) required for Electronic BRS.
My client does not have any interface or Mullticash format. It just downloads statement from internet and does manual BRS.
Please let me know if EBRS possible in such scenario
Edited by: Meenu_ND on May 5, 2011 9:58 AMMeenu-
Implementing Electronic Bank Statement is going to be quite a task:
1. First thing would be to ask your bank in which format they can provide you the statement. Lets say they provide you in BAI Format.
2. Then you would have to get a list of BAI Codes that will be used by your bank in their statements.
3. Get a list of bank accounts that you would be uploading electronically in SAP
4. Based on your company GL Account structure, create all the clearing accounts that are needed (cash receipt, cash disbursement, check receipt, check disbursement, clearing accounts etc).
5. Configure EBS in the system which includes creating BAI Codes, mapping accounts to bai codes, assigning your bank account numbers to company codes to BAI Structure.
Again, it all depends on what format you will be using. In US, we use BAI format and it is pretty straightforward task.
Hope this helps.
Shail -
All 11g pre-requisites check failed on solaris 10
During 11g R2 (64 bit) installation on Solaris 10 64 bit, all pre-requisites checks were failed.
Like the first one given below:
=======================
Physical Memory - This is a prerequisite condition to test whether the system has at least 1GB (1048576.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
List of errors: -
PRVF-7531 : Physical memory check cannot be performed on node "sol11oracle-vm" -
Cause: Could not perform check of physical memory on the node indicated. -
Action: Ensure ability to access the node specified and view memory information.
=======================
It seems that oracle installer not able to resolve the name "sol11oracle-vm".
Please suggest.Hi, know that its an old thread but anyway.
Check metalink for *11GR2 INSTALL ON SOLARIS FAILS MANY PREREQUISITE CHECKS [ID 989727.1]*.
Oracle 11gR2 software is NOT certified for:
a.) Solaris 10 “less than update 6” with the right patches.
b.) Solaris 10 “less than update 6” with a Solaris patch bundle.
c.) Solaris 10 “less than update 6” with a Solaris release update
It is only certified for a base install image of Solaris 10 update 6 or greater. -
CPO SAP Adapter pre-requisite Check Error
TEO 2.3.5 SAP adpater Pre-requisite Error
Trying to setup an SAP ABAP connection. Satisfied the pre-requisite of SAP NCO sapnco30dotnet40P_7-20007348, still get the following error while checking the pre-requisite.
Unable to check for prerequisites:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
This is what I see in the logs-
/StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
||735|2013/03/01 07:33:30.028|2084|PoolThread:57|||WCF: System.ServiceModel Error: 131075 :
||736|2013/03/01 07:33:30.029|2084|PoolThread:57|||WCF: <TraceRecord xmlns="
http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord
" Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing an exception.</Description><AppDomain>Tidal.Automation.Server.exe</AppDomain><Source>System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel/59871390</Source><Exception><ExceptionType>System.ServiceModel.CommunicationObjectAbortedException, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</Message><StackTrace> at System.ServiceModel.Channels.InputQueueChannel`1.EndDequeue(IAsyncResult result, TDisposable&amp; item)
at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext&amp; requestContext)
at System.ServiceModel.Dispatcher.ChannelHandler.EndTryReceive(IAsyncResult result, RequestContext&amp; requestContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result)
at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously)
at System.Runtime.InputQueue`1.AsyncQueueReader.Set(Item item)
at System.Runtime.InputQueue`1.Shutdown(Func`1 pendingExceptionGenerator)
at System.ServiceModel.Channels.CommunicationObject.Abort()
at System.ServiceModel.Dispatcher.ListenerHandler.AbortChannels()
at System.ServiceModel.Dispatcher.ListenerHandler.OnAbort()
at System.ServiceModel.Channels.CommunicationObject.Abort()
at System.ServiceModel.Dispatcher.ChannelDispatcher.OnAbort()
at System.ServiceModel.Channels.CommunicationObject.Abort()
at System.ServiceModel.ServiceHostBase.OnAbort()
at System.ServiceModel.Channels.CommunicationObject.Abort()
at Tidal.Automation.Server.WebService.WCFHost.StopServiceHost(Object state)
at Tidal.Automation.Common.ThreadPool.OuterWaitCallBack(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
</StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
||737|2013/03/01 07:33:30.164|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384). Proceeding.
||738|2013/03/01 07:33:30.164|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
Stack Trace: at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
||739|2013/03/01 07:33:30.165|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37). Proceeding.
||740|2013/03/01 07:33:30.165|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
Stack Trace: at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
||741|2013/03/01 07:33:30.221|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384). Proceeding.
||742|2013/03/01 07:33:30.221|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
Stack Trace: at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
||743|2013/03/01 07:33:30.222|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37). Proceeding.
||744|2013/03/01 07:33:30.222|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
Stack Trace: at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()Please open a TAC case. They can not only get you past the missing prerequisite, but also raise the issue on the bad prerequisite detection error which you are seeing so we can get it fixed in the product.
Maybe you are looking for
-
my iphone4s can not update any apps. Nor is it able to download any new apps. What should I do? I have two Apple Accounts. One in Switzerland and one in China. I used to be able to updates all of my apps by clicking individual apps. One day I clicked
-
Flash Player preference settings keep changing
Under System Preferences, my Flash Player settings keep changing every so often (every few weeks or so), in the Storage, Camera and Mic and Playback tabs. I have all three tabs set to Block and the settings change to Allow or Ask me. Why is this happ
-
Dont remember the pasaword how i can Get a recovery key
How i can Get a recovery key For My comp
-
When booting for the day, all contents of Mail disappear second time
When I signed on today, mail was essentially gone. I was asked if I wanted to learn about mail and I answered no. Then opened it and was asked for a password for my .MAC account, which I haven't used for years. Configuration was gone. This happened l
-
How do i inbed music from iTunes into video in iMovie
I have an imac 21.5 desktop and gopro 3+balck ? is how do I put music from my itunes into a video in imovie??? Thanks for any help as I'm new to mac / computers and sick of wasting time trying to teach myself something I have no idea about.