Pre-Steps for Solution Manager Upgrade

Hi Experts,
We are currently planning to upgrade the Solution Manager system from SM7.01 SP25 to SM7.1 SP03.
Can you please let me know the Pre-Steps that we need to consider in Solution Manager before Upgrading.
Awaiting for your response.
Regards,
Satish Dhanalakoti

Hi,
In addtion to the experts' suggestions above, please also check:
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Home -> SolMan 7.1 Section.
Could be of help.
Regards,
Srikishan

Similar Messages

  • Post Installation steps for Solution Manager 4.0

    Hi Experts,
    Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
    Thanks & Regards
    Sunil

    Hi
    In installtion guide you can find  the information you needed also check
    Visit for step by step details of Standard Configuration of Basic Settings
    www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
    &system administartion just drill out there you can find lot of simulator how to install and
    configure solution manager
    https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
    and for Maintenance optimizer setup
    https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
    Let me know if needed more information
    Regards
    Uday

  • Post Installation steps for Solution Manager 4.0 SP10

    Hi,
    Can any one of you help me out to do the post installation steps to be done after installing solution manager.
    Thanks in advance.
    Thanks
    Venu

    Hi Dolores,
    I am not able to find iTutor anywhere in service.sap.com/rkt-solman.
    Could you please give us the perfect path for that?
    Regards
    Pranav

  • Steps for solution manager sizing

    Hi,
    I could not see sizing for SAP solution manager in Sizing tool.
    Pls let me know of where i can find it

    hi,
    taken from
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b442d4ea-0c01-0010-a8ad-a4c2eaaf6b76]
    it is told :
    Do you have a rule of thumb concerning sizing?
    For small and medium sized companies, there is no need to set up a high-end server if it is only used for the SAP Solution Manager and its monitoring functions. A small/medium-sized server is sufficient. However, this is dependent on your needs and future plans. The following sizing proposal is based on a standalone server with SAP Solution Manager only.
    - For basic setup: 1 CPU current standard (min. 1 GHz), 1GB RAM, 50 GB hard disk space
    - For advanced setup: 2 CPUs current standard (min. 1 GHz), 2 GB RAM, 50 GB hard disk space
    The basic setup of SAP Solution Manager is defined as only having SAP EarlyWatch Alert and service level reporting, configured on the satellite systems and up to 5 users working at the same time on the SAP Solution Manager.
    The advanced setup of the SAP Solution Manager requires additional steps after the basic setup is complete. The advanced features cover the configuration of system monitoring and/or business process monitoring. For further information, please refer to the sizing proposals for SAP Solution Manager 3.1 on the SAP Service Marketplace.
    hope it help you.
    rgds,
    Alfonsus Guritno

  • Prerequisites for Solution Manager Upgradation

    Hi All,
             We are going to upgrade SolMan 7.0 to 7.1, what are the prerequisites to check ( Application Oriented not hardware oriented) i need to take care as SolMan Consultant. Could any one help regarding this as early as possible.
    Thanks & Regards,
    Krishnan Kumar.K

    Hello
    This involves lot of activities. Refer the market place.
    https://websmp204.sap-ag.de/instguides
    Thanks & regards
    bala

  • Solution Manager upgrade issue on Linux

    Hi Alll,
    Need your inputs/thoughts on this issue.
    We are planning for Solution Manager upgrade from 3.1 to 4.0 and for this the setup and plan is as below:
    The production data of the solution manager has been copied as a VMX FILE(VM Player) file on to a test server and we have plans to upgrade that and check and then upgrade on the production system.
    The test machine has got a different IP address and hostname. From the test machine when I start the sap instance its affecting the Production machine and dueto which the production will not work until I stop the SAP Instance on the test machine.
    It cannot be a IP conflict or hostname conflict as we have them differently on the test machine. But still there is an issue. The IT dept says the issue is with the starting up of the instance and we dont know where to see what exactly is the problem.
    I am new to upgradation stuffs, this is my 1st assignment and I am not sure from where to start!!
    Can anyone of you tell me where to check for the details?
    SOLMAN is installed on a unix machine with oracle 9.2 and we are planning to upgrade it to SOLMAN 7.0
    any suggestions on where to look out for the possible issue?

    Hi,
    I did this a lot and know the side effects a little.
    My recipe:
    1. Start the copy without network and manage it from the VMWare Console. Change the IP address and make sure all references to the hostname (DNS and /etc/hosts) point to the new one. I hope you're working consistently with hostnames and no IP addresses.
    2. Configure the firewall (iptables) on the copied system to block all requests from and to the original production server. If there is any communication with other SAP servers (like monitoring agents, SLD, or others) block this too!
    3. Re-enable the network in VMWare.
    Alternatively: Can't you simply put this in a VLAN or a real seperated network with just the server and a management workstation?
    Hope that helps..
    Nikolaus

  • What are installations material for Solution Manager 7.0 EHP 1

    hi friends,
    we plan to do installing Solution Manager 7.0 ehp1,
    can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
    thanks..

    https://service.sap.com/swdc
    ->  SAP Installations and Upgrades
    -> Installations and Upgrades - Entry by Application Group
    -> SAP Technology Components
    -> SAP SOLUTION MANAGER
    -> SAP SOLUTION MANAGER 7.0 EHP 1
    -> Installation and Upgrade
    Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
    Installation.
    Nelis

  • ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

    Dear all,
    Hi,
    I am configuring solution manager 7.0.
    In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
    program WEBADMIN not registerred.
    can any one tell me how to register this program in sap gateway.
    best regards
    azeem

    Hi Azeem,
    Just before creating the rfc connection do this step.
    Set-Up Solution Manager Connection to Solution Manager Diagn
    Use
    Check the connection to function Solution Manager Diagnostics.
    Default Settings
    The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
    Activities
    If the default values are correct, save the settings.
    To run the Solution Manager Diagnostics in another system, enter the required data and save.
    Also check that your java is active.
    Regards
    Ashok

  • Is it feasible to create odataservice for Solution manager using UI5 technology?

    Hi Experts,
    Is it possible to create new odata service for solution manager, such as Viewing BPML(Business process master list).
    If yes, kindly share the steps/way to achieve.
    Regards,
    Asmita Ranade

    Julie,
    same answer here which you already got in the two threads you opened on the MOS communities: No, not really since you want to do it in Answers. It *would* be possible in the RPD, but quite pointless to instantiate an RPD variable just to instantiate some literal code.

  • Problem in installation of Business Content for Solution Manager

    Hi all,
    I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
    Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects  (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
    The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like  “Infopackage 0SM_XXXX does not exist in D version; activation not possible”. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I don’t know why. The result is that no Process chain is visible from transaction RSPC.
    Am I missing some step, or doing a wrong/ incomplete procedure ?
    Thanks a lot

    HI Saravanan,
                  For Solman Service Desk, the following objects are used :
    Cube : 0CSRV_C01
    DSO  : 0CRM_PROH
    DataSource  :  0CRM_SRV_PROCESS_H
    And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
    Regards
    Mahesh Kumar

  • Wily Introscope Version for Solution Manager 7 SPS 17

    Hi
    We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
    I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
    On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
    I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
    Looking in the SWDC there are downloads in  SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
    Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
    Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
    Thanks for any help.
    Paul.

    Hi Bhudev
    Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
    As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
    When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
    the first 2 (of 23) setups are failing :
    SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    BI Cannot invoke CCMSBISETUP on host localhost
    Warning :
    User(BI) Role SAP_BI_E2E does not exist
    Then it says :
    To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
    I cannot find this Diagnostics Setup Guide for SP17 ?
    The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
    Thanks,
    Paul.

  • Solution Manager Upgrade to EHP1 7.01

    Hi
    Need some help. Could you please share  upgrade doc/exp with me, we are planning for upgrade solution manager from sp17 to sp19.
    Stack level 18 or 19 is the part of  EHP1 of Solution Manager version 7.01.
    What is the process to upgrade the support pack to sp level 19? i have no exp to upgrade to EHP1 level..Any difference ?
    Thanks in advance
    Amar

    Hi Amarjit,
    Solution manager upgrade to EHP1 is same like other stack upgrade. You can do it using SAINT/JSPM. But only thing you need is good preparation.
    Check upgrade guide on http://service.sap.com/solutionmanager.
    Also, check SAP  Note 1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1 and SAP Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade
    Thanks
    Sunny

  • CRM Content for Solution Manager

    Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Please help.
    Kind Regards
    Felix

    >
    felix chabeli wrote:
    > Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    >
    > I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
    If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
    The content is shipped via add-on ST-PI and its support packages.
    Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
    Regards,
    Ruediger

  • Is there any service desk guide for Solution Manager 7 configuration?

    Dear Sir:
    I would like to configure the service desk of solution manager 7.
    but all i found documents are for solution manager 4.
    the IMG setting and other steps are quite different...
    wondering is there any new guide or step by step documents for specific solution manager 7?
    Regards
    Jack Lee

    hi,
    There is no direct document which is that much specific
    Have you checked this document
    https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
    U can follow the steps and if u dont find any node u cn search in SPRO
    in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
    rest check this
    Service Desk: Support team determination
    /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
    Service Desk Implementation Guide
    /people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Hope it helps,
    Regards
    Prakhar

  • RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

    Hello,
    Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
    Id: [email protected]
    Thanks,
    Regards,
    venkat reddy.

    Hello Venkat,
    You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
    Basically after the installation,
    1. try to stop and start the SAP System
    2. you need to check if you can access the SAP System.
    3. Apply the permanent SAP license
    4. Perform the configuration via  IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
    Hope this could help you.
    Regards,
    AZLY

Maybe you are looking for