Pre turned itself off, after reboot, acted like it was my first use

Had this phone for several months now. Tonight it just randomly was off when I reached to use it. After a 10 min boot up, my apps were still on the phone, but I had to 'agree' to usage of the app store, and had to re-register my foursquare, accuradio, preware, email, and calendar. I dunno what else needs re-registering since I have so many apps.
Anyway, the phone is acting like I just turned it on for the first time. Also my stored alarms were erased.
Anyone ever have these issues?
I've had the lost alarm clock issue before, but never lost my registrations on my apps.

Hello bcast:
Welcome to the Palm Forums. Has the issue you mention repeated since your last incident?
notimeoff

Similar Messages

I have hp3210xi and it just stared to turn itself off after some time, did I do somthing to

hay body, I have hp3210xi all in one and it ws just fine and I had to install the printer on a computer and after I did this the printer just stared to turn itself off after it has ben on for awhile. my system is both win 7 and xp. thanks
vhg.

i already rebooted it but it still wont turn back on, it shows me the apple logo, then it fades and it gets bright again intermitently...

I dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes

i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!

so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.

Calendar alerts on every device after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?

I have Calendar alerts on every device [Mac/iPad/iPhone] after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?

Well, whichever device you uncheck = exclude from calendars (and reminders) via iCloud will be excluded as both, receiver and sender. It's an "all or nothing", I guess. Otherwise it'd get more complicated, and the support calls could easily fill an extra forum...
@lmp68: don't think iTunes is it, in the days of iCloud that would sure take quite an extra effort, if possible at all.

Airport Turning itself off after 10.5.7 Update

Ever since the updated to 10.5.7 my MBP is acting crazy with lock ups and airport turning itself off. The only fix I can find for this is to reboot the Macbook Pro and then it will work again for a few minutes before turning itself off. Any ideas how to fix this problem?

Thank you for the link.
It's deliciously ironic that I'm typing this reply for the second time now because after composing it the first time, and failing to glance at the Airport connection icon first, I clicked "Post Message" and received "Safari cannot open the page http://discussions.apple.com/... because your computer isn't connected to the internet" and after refreshing the page lost what I had written (should have tried the back button first).
Lovely.
As I was saying, I have little confidence that Apple will find or fix the problem in a timely fashion. Yes, maybe they will, but there are other examples (wireless keyboard and mouse connectivity under Leopard) where they took months or longer to release a fix, so I'm thinking I don't want to hold my breath, especially if this issue is only affecting a small portion of the population (I haven't heard a loud hew and cry from the masses).
I'm not looking forward to rolling back either, and given my current lack of free time I may reluctantly wait for the next update just to see if it addresses the issue, especially since after I go to the trouble of rolling back to 10.5.6 I don't know when, if ever, I'll feel brave enough to accept another OS update.

Update: Video - Canon 6D turns itself off after a few shots with fully charged battery

Update: I uploaded my video to youtube, please comment:
http://youtu.be/3PNLUYd8g7A
TIA and pardon me for my English.
I posted this originally at another forum, and somebody suggested me to post it here as well, to get more help.
Long story short, I purchased a brand new Canon 6D from B&H on Oct 24th, 2013. From early december, the camera starts to shut itself off randomly and displaying empty battery. I found the camera constantly shuts itself off after 20 - 100 continuous shots with a FULLY charged battery (right off charger, showing 8.23V using multimeter, and showing 98% in battery info).
The camera will just turn itself off in the middle of shooting, showing empty battery int the shoulder window. The solution is simple, open the battery door, then close it again, no need even to pull the battery.
So, I contacted Canon support, sent the camera to the VA service facility, waiting for it be repaired. As an engineer myself, I understand things fail, and I thought this is such an easy issue to reproduce, anybody should be able to repro it.
Couple of days later, I received a phone call to send my accessories in, no problem, debugging needs more info, that's normal. I sent my lens and stuff in. I unfortunately had to bear the cruel fact that I don't have a decent camera for the holiday, though I have a backup.
After a long wait, on 12/28the, the accessories were delivered at 9:35am. At 10am, they called me, they were sending the camera back. No issue at all. I was like, have you tested AT ALL? They didn't care, sending the camera back regardless.
I received the camera on Jan 2nd, and saw the same issue on that day. Of course, it was NOT fixed at all.
I googled really hard, somebody said he had similar issue but it was a defective battery, so I got a brand new Canon battery, unfortunately, the same issue pops up again.
Ok, the only choice for me is to send it back again. But this time I am totally amazed by Canon.
I sent the camera in again with my lens and battery. Also, a video showing the issue on a standalone CF card (I know 6D does not take CF, just to put the video on it).
Couples of days later, they called asking for accessories, I was like, what accessories, I don't have any more.
Then the camera sit in their facility for a few days for nothing. All of sudden I received a phone call on Monday morning, said it is ready. The camera has no issue at all.
I called, asked whether they have watched the video, they told me two technicians, including a senior one, was not able to upload the video to the computer. I was like, what the hell? why the heck you need to upload it to the computer, find a card reader, plug the card in, double click, how simple is that?
I talked to the service manager over the phone, he told me that there is nothing he could do, if their technician said so. They have decided to send my camera back, NOT fixed, again. I esclated the issue again, but haven't heard anything back yet.
Honestly, I am totally pissed, how stupid can they be? I included a letter with detailed steps on how to reproduce this issue. As an engineer myself, I know how easy to reproduce this issue. But what shocked me is that they don't even know or they didn't even bother to watch the video. In the same letter, I asked/begged them to contact me if they cannot reproduce the issue instead of just sending it back unfixed.
Guys, any other ways to get their attention? I already filed a BBB complaint. For a brand new camera of 3 months old, it has been in Canon's repair shop for almost a month. Leave to say that I missed the most importand holiday season in the year. This is simply not acceptable.

"The camera usually shuts itself off after 20-100 continuous shot, ..."
By this you mean your are in continuous drive? You just hold the shutter release down until it stops shooting?
"... the shoulder LCD shows a ..."
What is the "shoulder" LCD?
Sorry for the extra questions but I am trying to understand exactly what you are going through and why Canon said it is OK.
Canon did not say it was all right if it is not.
You are, also saying, if you use the camera, just for a single snap shot, say several in a session, it is OK? Right?
It only shuts down when on continuous drive or video?
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

IMac turns itself off after an attempted RAM upgrade

I took the 1GB from the memory slot and installed
2x2GB which didn't work so replaced the original
1GB and now it shuts itself off after about ten
seconds of attempting to reboot. I've tried all
combinations but nothing works.

Doug,
I work as a sys admin at a college, we bought 90, 20" I Macs last November, we have had 3 break so far with the same problem, and one with a failed motherboard as a result of a bad power supply.
I have been a mac user for over 10 years and to have machines break after 2 months of use is shocking for a company that previously had such a good reputation for quality products.
This is a known issue, and the company that fixes our machines under applecare has admitted that these machines have a faulty power supply. I know the Rev A models had issues with power supplies, but the fact that all the 20" models have a 150 watt power supply doesn't help as this is not enough power to run a power pc plus 20" screen etc.
If i were you i would get it sorted straight away as other people have had this issue and it will only get worse if you dont get the power supply replaced.
Regards,
Kevin.

E65 Turning itself off after a call

If you close the phone to terminate a call my phone turns itself off. Does anyone else have this happen?
Cheers

Buddies,
If the problem still persists after inserting a piece of paper then hard reset ur mobile by pressing *#7370# but plz keep in mind that the all installed softwares will be uninstalled. all data will be erased. so dont forget to take backup
Amit Chaudhari M. E. Civil Pune - Motorola (double line Display) - Samsung X-600 (Flap) - 3315 - Sony J5 - 2850 - 2100 - 3100 - Samsung C 100 - Moto C350 - Moto C650 - Moto E 365 - 3220 - 1100- Palm Treo PDA (B&W) - 6681Silver - Moto C650 - 2865 - Samsung Ultraslim V9 - 6681 Black - Spice D88 (Dual Sim) - Samsung D900i - Samsung E250 - E50 - E51
CDMA - Moto Basic - 2112 - Samsung Hero - Telson TWC 1150 (Watch Mobile)

My iPhone 4 is turning itself off after 40% battery life is surpassed.

Although I still have about 40% charge on the battery, the iPhone just turns itself off, like it has no battery life at all but when i plug it into the charger, it starts up again automatically and shows that I still have about 40-45% battery life available. What is going on? How do I try to recalibrate it if I can never get it to 0% battery life? Please help.

Same case here, but mine is Iphone 3GS having 40-50% battery then a little moment boom, it shut itself off. How to fix this someone help.

MBP turns itself off after grey screen

hello,
i tried searching the forums for this problem but didn't find why this is happening to me. i tried to install leopard upgrade dvd on my mbp and had many problems just as it couldn't find 10.4 and so on, just like many others have had. then i decided to give up and just go back to 10.4.11 but my computer didn't recognize it as a startup. so i decided to eject the leopard dvd and restart and my computer now goes from the spinning wheel on the grey screen and then turns itself off completely.
i have tried:
1. disk utility (when i was installing leopard)
2. reset my pram
3. waiting 10min on the language screen
sorry if this problem has been resolved. i would appreciate any help..

Hi T,
IIRC, the three flashes (used to be beeps) indicates bad RAM. Do you have any other compatible RAM available to try?
Message was edited by: tjk

HT1296 Since I downloaded iOS 7, my iPhone is constantly turning itself off and the battery useage is twice what it used to be. I want iOS 6 back! How do I uninstall iOS 7?

I downloaded iOS 7.0.2, and now my iPhone 5 keeps turning itself off and the battery useage is twice what it was. I want iOS 6 back! How do I uninstall iOS 7?>

So, after it charged and was still plugged in, I deleted the Exchange account and then reset it holding down the sleep wake buttons until the apple logo appeared. I also changed the limit on my emails to 3 days instead of 1 week. It turned on, so I turned it off and let it charge overnight. This morning, it stayed on for 3 whole hours and then shut itself off again. I had to try 5 times to get it to come back on. Now, a message appeared that Exchange cannot verify a server, I can't see the full name of the server anymore, but it is *.hotmail.com GlobalSign Root CA from Microsoft. So I'm selecting Accept to see what happens. I'm very discouraged, I need my phone to be reliable for my work. It was reliable for 11 months without one problem, and now since I downloaded iOS 7, it hasn't been on for one full day since.

Satellite U845W-S400 turns itself off after a minute

I have a U845W with Windows 7, which shuts itself off about a minute after booting up.
There is no blue screen of death, the computer just dies.
I tried booting two different versions of Linux from USB and the same thing happens - a minute or two after boot-up,
the computer shuts off.
However, if I boot up into Windows safe mode, the computer works for longer.
It still shuts itself off randomly, but might work for a half hour to an hour.
If I boot into Windows safe mode with only the command prompt, it works the longest - for a couple of hours.
This happens no matter if it's running only on battery power, or if it's plugged into the wall.
I tried looking for memory dump files and found none.
This all suggests a hardware problem, not a software one, but unfortunately the computer is past warranty.
I think I can figure out how to open up the laptop, but I don't know what I should look for in its insides.
Does anybody have suggestions for my problem, or maybe a copy of the U845W service manual?

when in safe mode, can you check the temp of the cpu? newer Toshiba computers have a program that displays cpu temp, fan speed, etc. I'm not sure if it will be avail. in safe mode.
I would lean toward possible thermal shutdown due to dust/dirt in the fan, fan housing, heat sink. This can be cleaned by opening up the computer like this.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Internet Sharing turns itself off after a minute or so

I have an Intel iMac running 10.5.2. Up until a week ago, I was sharing my internet connection with a Windows computer and a wii. Last weekend, the connection went dead, I reset the modem and rebooted my computer, and the internet connection is fine, but the Mac won't share it. I select Internet Sharing in the Preferences, the green dot appears, and for a minute, I can use the internet on the P.C. Then it's off. The preferences panel shows that it's on, but if I reopen preferences, it's no longer checked as on. I've deleted the com.apple.nat.plist file in the library, but no luck.
My system has cable internet to a router, and splitting it 3 ways. It's worked fine for 2 months, until now.

The problem seems to have come from my wireless transmitter (to my wii). I hit a few buttons on it and the problem solved itself. Why would an outside product over-ride my macs internet sharing? No idea, but it's solved for today at least.

Installed ios6.1.3 to iPad 3 now it keeps turning itself off after a few seconds and is not recognised by itune

Please help. My daughter has updated her iPad with iOS 6.1.3 and it now keeps crashing after a few seconds use..we have tried a rest and this doesn't help. Thx

From iPhone: Hardware Troubleshooting - http://support.apple.com/kb/TS2802
[Will not turn on, will not turn on unless connected to power, or unexpected power off]
1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4. After at least 15 minutes, if:
      -The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
      -The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
      -Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
      -If the display turns on, go to step 4.
      -If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Stabilization turns itself off after analyzing?

I have some strange issues with some clips needing a bit of stabilization.
Some of the clips in the timeline (from the same main clip) somehow can't be stabilized, but I get no warning. The only way I know, is because the blue "on" light turns off just after "Analyzing for dominant motion" reaches 100%
Other clips (from the same main clip) work fine wThanksith stabilization.
Any ideas? Is there a log I can check?
Thanks, Peter

Could be? However the shaking is very minute. So I shouldnt be an issues because of excessive shaking
A workaround (I found) is to not create proxy media in the import process. At least for these clips it works (so far)
/peter

Pre turned itself off, after reboot, acted like it was my first use

Similar Messages

Maybe you are looking for